Can Root Just About Every Android Phone Out Their (Phones Running Android L Have Not Been Tested.)
Root, All Phones, LG G3, Galaxy, Galaxy S4, S5, S6, G2, Motorola, HTC, Casio, Samsung, LG, Nokia, Moto.
Samsung Galaxy devices from 2013 and onward are unlikely to work correctly. Examples are Galaxy Note 10.1, Galaxy MEGA, Galaxy S 4, Galaxy Note 2, and Galaxy Note 3. This is because of KNOX.
LG devices will be fully unrooted, but will still say "Rooted" afterwards because of LG's eFuse.
Simply hit the 'UNROOT' button and allow Root Access when asked to give it permission. The device will then reboot and you will be completely Unrooted when you boot back up.
****WHEN APP DOES NOT REBOOT AFTER ALLOWING ROOT, CLOSE THE APP AND HIT UNROOT AGAIN****
This is a great app for those who are trying to complete a warranty return with a carrier for a defective device hardware or a repair. If you only want to temporarily lose Root Access, this app is not for you. Unrooting is permanent and cannot be undone with this app. Only use this if you truly want to lose Root Access.
If your device has an Insecure Kernel (Boot.img) the app will now tell you and close. This is for users who could not bother to read the App Description that warns you that if your device has an Insecure Kernel, it will NOT fully unroot you.
Insecure Kernel (Boot.img) means that unless your Kernel (Boot.img) is brought back to the factory stock file, your device will never be unrooted fully, so this app will no longer bother attempting to try, only to get users complaining about not being able to OTA.
Please be aware, this app does not gurantee that it will fix your specific devices "Over-The-Air Update" issues. In most cases, anything you did with root such as: Debloating, Installing a custom Kernel, custom ROM, custom Recovery (like TWRP or Clockworkmod), enabling tether, etc. will NOT be un-done by this app. If you can't update because your system was modified, look for a way to flash back the entire device, such as Odin for Samsung.
You can see a video explaining this by "zedomaxx" on youtube here: http://www.youtube.com/watch?v=CdlIxE7K_vw
Support for x86, ARM, and MIPS devices.
Support for ChainsDD Superuser, Chainfire SuperSu, and Koush Superuser.
Featured on Droid-Life! - http://www.droid-life.com/2013/04/11/new-app-claims-to-unroot-any-android-device-with-a-single-tap/
Featured on Phandroid! - http://phandroid.com/2013/04/11/universal-unroot/
Featured on AndroidFanNetwork! - http://androidfannetwork.com/2013/04/11/one-click-unroot-app-for-any-android-device/
Featured on Frandroid! - http://www.frandroid.com/applications/136681_universal-unroot-pour-desactiver-le-root-dun-seul-clic#more-136681
Featured on GetNews JPN! - http://getnews.jp/archives/320358
Tomsgt123 - http://www.youtube.com/watch?v=ySNStU8OTuk
DroidModd3rX - http://www.youtube.com/watch?v=_viwAMoIcJM
tmyinc - http://www.droidrzr.com/index.php/topic/15295-universal-unroot-app/
SEO: root, unroot, superuser, SuperSU, rooted, hide root
What makes this method really universal is that everything happens on the app side, no system files modifications are required whatsoever. The tool basically emulates the behavior of the init.d kernel mechanism : it will detect whenever the device is rebooted and execute the scripts located in /system/etc/init.d.
With this init.d support granting mechanism comes a kernel-sided init.d support detection mechanism, so that your int.d scripts don't get executed twice, which would only make for a longer boot time. Basically, when you run the test, it will generate a little init.d script which creates a file on your sdcard. Then, after you rebooted, it will check if the file that the generated script creates has indeed been created in order to determine if your kernel already has init.d support built-in. If the file was created, it does. If not, it doesn't, as simple as that.
An additionnal functionnality to this app is the ability to manage, edit, delete & run your init.d scripts with the touch of a button.
You can check-out the source code of this application and contribute to it at : https://github.com/Androguide/Universal-init.d
WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGES ON YOUR DEVICE!
I DIDN'T MISSPELL ADIUTOR !
Read the FAQ in the application for further informations
This is fully compatible with:
- Code_Blue Kernel (Nexus 5/Nexus 6)
- M5 Kernel (Xperia Z2/Xperia Z3/Xperia Z3 Compact)
- TGM-Hybrid (Oneplus One/Moto G/Galaxy S2)
(You are not using any kernel mentioned above? Don't worry this app will work on any device!)
An application which manages kernel parameters.
It depends on your kernel which features you can use.
With Kernel Adiutor you can tweak and monitor things like:
CPU (Frequency, Governor)
GPU (Frequency, Governor)
Screen (Color Calibration [RGB], Gamma)
Wake controls (DT2W, S2W)
Sound (Faux Sound)
Battery (Fast Charge)
Kernel Samepage Merging
Low Memory Killer (Minfree settings)
Virtual Memory (ZRAM)
Build prop Editor
Recovery (Flash, Wipe)
and a lot more... (check it out, keep in mind that only supported things will appear on your phone!)
Features which aren't supported by your device won't show up in the first place.
This Application is open source!
Help me translating this application!
You want to support me?
Tired of waiting for an update? New features every day! Join beta testing now.
App will auto detect room for device and download after install automatic
After install, you should restart device to make sure running perfect.
And addition, with Root Installer app, you can get lastest busybox for device
You will dont need using Odin or read guide on XDA forum, only one click, your device will rooted
If have any problem, please contact direct via email for me
Thank you for using Root Installer
The ultimate tool for root users to FREEZE unwanted apps on your droid! Quickly get rid of the overrated BLOAT that is added by your phone manufacturer or network provider!
But the app is not only useful to block system apps: APP QUARANTINE is here to replace your TASK MANAGER as well. Without draining any battery you can quickly disable apps that you don't need very often and with the homescreen WIDGET you get them back in action with a fingertip.
For experienced users there are even more options like disabling system services or automatically freezing unwanted apps after flashing a new CUSTOM ROM.
This is the PRO version of APP QUARANTINE which is even more kick ass! You can filter apps by their permissions and put them together in groups. In the homescreen widget you can disable multiple apps at the same time without a hassle, or you can toggle only selected apps from a group.
Furthermore there's now a password protection. So you can easily lock your important apps from unauthorized access!
If you love using this app just as much as I love developing it then let me know and give me your feedback! I'm always looking forward to receive more comments and ratings in the Market and read YOUR OPINION in my BLOG or on GOOGLE PLUS!
Attention: This app will only work on devices with ROOT access!
*Backup file is stored in SDCard, so you can easy bring to anywhere to store, and also restore to other devices.
*Device ID Changer will automatic genarates a new ID for you, however, you can also create you own ID :)
*NOTE: Remember to allow Device ID Changer on your supperuser.
**NOTE2: This app work perfect on Genymotion, and not guarantee on others devices. Feel free to refunds if it can't help you (sorry :( )
If you want the source code, feel free to email me :)
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Boot Shell act as an alternative for devices which have ROMs/Kernels without init.d support.
It does not have any predefined functions, but the commands you enter can make it a very versatile app with wide set of possibilities.
Some of its possible applications -
-Backup apps to SD card
-Trim file system (fstrim utility, fix lags)
-Tweak GPU, CPU, I/O, Display parameters
-Load kernel modules
and a lot more
You can add any number of shell commands or script files, which can be executed at boot. That's not all, you can also save commands as favourites that you intend to use frequently, but don't want it to be executed at every boot. You can execute them any time you want from this app.
Completely ad/spam free and will always be.
█ Prerequisites -
Explanation for Permissions -
-> Read/Write USB Storage - Allow the Shell commands to read/write on Device Storage, modify execute script files
-> SuperUser Permission - To Execute Shell Commands
-> Run at Startup - To be able to execute Shell commands at Boot
Check out the Pro version with extra features -
-Execute script files at boot or whenever you need it from the app.
-Inbuilt Script/Text Editor.
-View console outputs and errors.
Titanium Tweaker is a CPU optimizing application which helps you boost up your Phone's CPU and make it faster.
The application tweaks the kernel, as the name suggest, such as to change the Scaling Frequency, Governors and Schedulers.
Also this app is universal so will work on all ROMs and Phones which support the features!
UPDATE INF :- Turbo Charger! Boost your phone with PreSet TurboCharge'd LMK profiles ! Now added Set On Boot Option,Hardware Acc. , Faster App , Old Features Coming Back Soon in Further Updates
Fellow Developers! Feel free to add this app to your release's ramdisk
Previous Users of this app must have noticed that this app is updated after ages :P Actually i did not update it,
I completely rebuild it from scratch ! with a better heirarchy , sleeky UI, a fast Interface, and sexier tweaking
So you may miss features like Prop Editor, Turbo Charger, Customized toggles, etc
These features will be added in the next few releases after which i will work on better tweaks
Current Features of this application :-
* Cpu Frequency Optimization
* Governor Selection
* Choice of Available Scheulers
many old and new features coming back
Titanium Kernel Users :- There will be updates on kernel specific parts too like voltage and other scripts Stay tuned for it.. You can get the voltage working version from Aditya's SL kernel Thread till then
The application works right from froyo upto JellyBean (4.2)
Note :- ROOTED USERS ONLY !!! no, i was'nt shouting,, its so that it comes to you attention
Supporting all SU binaries and works with all kernels and roms.. If you are on stock, it will not work..
follow on xda :- http://forum.xda-developers.com/showthread.php?t=1749151
Aditya Patange (adi_pat) - could'nt have dont it without you
Ajay Kawte (speed_bot) - appreciation
StackOverflow :P - i would have been nothing without you.
Others - testers etc..
√ batch uninstall user application
√ Batch Uninstall depth system software (requires root privileges);
√ silent uninstall, no longer appear annoying prompt box (requires root privileges);
√ freezing and unfreezing applications (requires root privileges);
√ Recycle Bin function, to avoid accidentally deleted
√ Check the memory backend application
√ 4 kinds of sorting (by name, by size, by date of installation, by the memory of running in the background)
[Why use Uninstall Expert? 】
Uninstall experts to provide you the most complete, easiest quickest uninstall feature, a unique sort of memory occupied by running in the background, so you can easily uninstall often occupy a background resource applications!
system app remover , System App Remover , Easy Uninstaller , Uninstaller , Root Explorer System app remover , System Root Cache Cleaner , System Info , Uninstaller for android , Uninstaller AVG , Uninstaller bloatware , Uninstaller free , Uninstaller pro , Uninstaller app System apps uninstaller App remover for android System app disable
Root Checker Advanced gives you an easy way to know if you have SuperUser (or ROOT) and Busybox in your system and their path routes.
Root Checker Advanced give you an easy explanation of what is Root and what is Busybox.
This app was designed to have Holo Theme in all Android phones.
-HAVE YOU GOT DOUBTS? ¿DO YOU WANT THAT YOUR QUESTION APPEARS IN THE FAQs SECTION?
It's very easy, download the application, press menu button and select FAQs. Inside FAQs press menu button and select "New Question".
-DO YOU WANT TO OBTAIN MORE INFORMATION ABOUT ROOT AND BUSYBOX IN YOUR PHONE?
Buy PRO (Root Checker Advanced PRO) for only 0,99$. Paid version unlock this features:
-More Root Information
-More Busybox Information
-HOW CAN I ROOT MY ANDROID PHONE?
If you are finding how to root your phone, try to search in Google or XDA-Developers forum, there are lots of useful guides to root your Android phone.
The model that you need to follow to find a good guide is something like that:
"How to Root" + Phone Name
For example, if I have a Samsung Galaxy Mini I will search --> How to Root Galaxy Mini, and if I don't find it I can add more information ---> How to Root Galaxy Mini S5570I.
-WHY THIS APP HAS BAD RATES BUT IT DOESN'T HAVE NEGATIVE COMMENTS?
Very simple, we are plagued by "haters", people who rate applications negatively for having fun, putting comments like "Love 4ever" leaving two stars, or simply they keep silent to keep their Google+ profile hided. This application works correctly and most of the users are happy with it. I noticed that there are people that doesn't like my ads, but mine is not annoying or intrusive, in fact it is a single box on the bottom of the screen, but that or any little thing give reason to people like that to comment negatively . Do not become one of them and if you comment negatively less say why.
TAGS: root checker advanced, check su, superuser, find root, busybox, locate, path, installation, holo, comprobar su, superusuario, probar root, rootear, localización, ruta, instalación, prueba, shell, command, roottools.
App Ops is an activity, within the Settings app, that allows users to enable or disable operations on a per-app basis. These operations cover many common scenarios identified by permissions (e.g., read contacts, write contacts, access location), though it is not a pure one-to-one mapping.
Root required. No Ad. Sale 50%.
On Android 4.4.2, App Ops is removed. This app helps you to bring it back.
Otherwise, this app have a button to start stock App Ops on older Android version (4.3, 4.4)
Please checkout XDA thread: http://forum.xda-developers.com/showthread.php?t=2569194
- Access notifications
- Alarm volume
- Audio focus
- Bluetooth volume
- Call phone
- Draw on top
- Keep awake
- Master volume
- Media buttons
- Media volume
- Modify calendar
- Modify call log
- Modify clipboard
- Modify contacts
- Modify settings
- Notification volume
- Play audio
- Post notification
- Read calendar
- Read call log
- Read clipboard
- Read contacts
- Read SMS/MMS
- Receive SMS/MMS
- Record audio
- Ring volume
- Send SMS/MMS
- Voice volume
- Write SMS/MMS
Please, read the description. There's a link to a trial version!
OK, Google from any screen can cause the problem with recording!
The app is intended for automatic call recording from the phone line where supported by hardware and kernel.
Root access is a must for many phones, as manufacturers often won’t implement the required functionality.
There are 4 recording methods:
- Standard API
- CAF (root required)
- ALSA (root requried)
- Kernel (root required)
Standard API - method which doesn’t require root access. Check out every audio source before using. Many phones support recording using this method, from the microphone only (audio source “Microphone” should be selected).
CAF and ALSA - both methods require root access. Device settings in settings → recording are very important here. If your phone isn’t listed, select a device which has the same chipset as yours. The main difference between CAF and ALSA is that CAF doesn’t require ALSA installation, and supports more functions.
Kernel - recording method for phones based on old chipsets by Qualcomm; root is required. This method doesn’t guarantee 2 way call recording.
Which recording method is better?
Neither recording method can ensure that your calls will be recorded from the line; this is phone-specific. And you have to try and find out the one that fits your phone if it’s not auto-detected.
Where can I download a trial version?
On xda-developers.com: http://goo.gl/u690rm
• In call control
• Call confirm
• After call actions dialog
• Search recordings
• Edit info about recordings
• Volume control
• WAV, AMR, MP3
• Manual encryption for WAV recordings
Note: You do not receive the email containing the code after 5 minutes please Email me at email@example.com and i will personally send you the code.
Click On The Website Link To See Why You Should Unlock Your Phone.
And Almost Any other service provider.
Can Root Just About Every Android Phone Out Their (Phones Running Android L Have Not Been Tested.)
Root, All Phones, LG G3, Galaxy, Galaxy S4, S5, S6, G2, Motorola, HTC, Casio, Samsung, LG, Nokia, Moto.
Google Maps Directions
New Features Coming Soon:
*Parking Lot Finder
*Gas Station Finder
*Save multiple locations (Checkpoints) at one time.