Recording engineers spend a lot of time and energy trying to record audio as pristinely as possible. In the process, for the most part, any sense of acoustic space is of secondary importance when compared to the perfect capture of the primary sound. There are many reasons for this and it is reinforced by the the ability to "add back" the room & space when mixing.
This course – picking up where the Acoustics course left off – is filled with lots of in-depth explanations and animations explaining how all the major time-based effects work. Combined with an abundance of sonic examples, you learn how best to apply these FX which enhance the sound of your productions by adding depth, body and presence.
Table of Contents:
1. Intro to Reflection-Based Effects
2. Delay Times for Delay-Based Effects
5. Doubling (ADT)
7. The Leslie Rotating Speaker
9. Introduction: Reverb Types
10. Send & Return Hookup for Reverb
11. The Reverberant Sound Field
12. Algorithmic Reverb (Controls)
13. Convolution Reverb
Reverb time is perfect for sound technicians, sound engineers and musicians who want to calculate the reverberation time using a fast and accurate algorithm.
All you need to calculate the reverb time is:
- Reverb Time Meter installed in your device.
- Generate a short impulsive sound such as hard slap.
With this application you can not only calculate the reverberation time (RT60) of the room, but can also see graphically how the sound energy is extinguished.
To ensure a good reverb time measurement, generate a high intensity sound and let the reverb sound for 2 or 3 seconds.
Reverb time meter app allow you:
- See the energy evolution.
- See the section used for analysis.
- Clipping indicator in the measure (it is advisable to go away from the microphone).
- Signal-to-noise ratio (SNR) indicator (it is advisable to generate a hig intensity test noise).
Guitar-Effects is a Digital Amp & Pedalboard for Windows, Linux, Mac OS, Firefox OS and Android.
Now you can carry your pedalboard everywhere. Plug in your guitar (or bass), add the pedals you want and start playing!
Effects availables: Digitalizer, Bitcrusher, Flanger-Darkmouth, Flanger-Manhattan, Flanger-Classic, EQ-Low, EQ-Mid, EQ-High, EQ-Peak, Fuxx-Boz, Fuxx-Bit, AutoReverb, Fuzz, Overdrive, Overscream, Chorus-cassic, Chorus-supercharger, Delay-mono, Delay-Stereo, 3-BandEQ, Reverb-classic, Reverb-catedral, Reverb-smallroom, Rinring, Convolver, Compressor, Limiter, The-Ripper, The-Bytter, Flanger-Silver, Flanger-Stereo & Sterefy.
Tools availables: Analyser-Tuner & Recorder(Firefox desktop only).
Amplifiers & cabinets availables:Bassman, EQG, Modern GER, Vintage US, Vintage UK, Clean, Bass, Deep, Stereo and Alien.
More Effects, Amplifiers & Cabinets very soon.
If you have the right cable (see below), you can plug in an electric guitar, otherwise use an acoustic through the microphone (headphones required for this option).
This paid version includes the following features:
15 configurable channels, plus tuner (channel 0).
Phasor (Phase off)
Wah Wah Effect
Wifi output for mobile guitar (requires PC on same Wifi).
Use Louspeaker option.
Native Audio option.
Integrated basic guitar tuner for ease and convenience. In addition, a Metronome feature has also been added.
All effects are now configurable so you can create a great range of sound.
Please note that the "Use Loudspeaker" option, which is designed to allow you to plug your guitar into the phone and have the music play through the speaker, may not work on all phones.
For those guitarists fortunate enough to have a Nexus 5, Nexus 7, Nexus 10, Galaxy Nexus or possibly Nexus 4 running Jelly Beans (Android 4.1+) the delay using Native Audio option is much less -- around 60mS at present. Unfortunately most other phones/tablets will have more latency with native audio.
The "right cable" is a 3.5mm trrs connector to 6.25mm TS mono (guitar) plug. You can use a commercial cable such as an iRig™ cable or a GuitarConnect™ cable.
Please send an email to the Developer address if you have problems or issues, or wish to request new features for this guitar amplifier simulator.
Permissions: Internet permission is only used for Wifi output feature.
iRig™ is a trademark of IK Multimedia Production Srl. GuitarConnect is a trademark of Griffin Technology Inc.
Electric Guitar Amp and Guitar Effects Processor Guitar Pedal
Andrig is a mobile application that turns your Android device into an electric and bass guitar amplifier (shortly “amp”) kit. Instead of investing in expensive and hard-to-carry amps, electric guitar players can quickly access, affordably purchase, and enjoy using Andrig easily on your mobiles anywhere with your electric and bass guitars.
We named “Andrig” by combining the words “android” and “guitar rig”, shortage of Android Guitar Rig application.
Andrig turns your Android device into an easy-to-use Guitar Multi-Effects Processor(stompbox) and electric guitar amp kit.
Carry your whole guitar rig with you in your pocket, wherever you go.
Improve your music experience with Andrig's high quality, stunning tones.
Andrig is aiming a high-performance guitar(amp & stompbox) rig simulation (as much as Android allows).
It has never been so simple to control all your guitar effects! With Andrig's user-friendly interface, things will never get messed up. AndRig comes with seven stomp box effect pedal.
★Guitar amp - FREE
★Overdrive Guitar Effects Pedal
★Distortion Guitar Effects Pedal
★Chorus Guitar Effects Pedal
★Delay Guitar Effects Pedal - FREE
★Reverb Guitar Effects Pedal
★Noise Gate Guitar Effects Pedal - FREE
★6 Band Graphic Equalizer(EQ) Guitar Effects Pedal
★Drag and order effects
Currently In progress:
- New Electric Guitar Amp (vacuum tube sounds) like Marshall , Fender electric guitar amps etc...
- New stomp box effects such as Wah-wah, tremolo, phaser and more...
- Built-in guitar tuner.
- Cabinet simulations.
- Audio Record Module.
- Android 3.0.x or higher
- minimum 240x430 (3.4'' screen size in landscape )
Feel free to share your ideas with us.
Like us on Facebook: https://www.facebook.com/AndrigApp
Web Site: http://andrig.deplike.com/
Available for Android 2.3 and higher.
- 5 band-level equalizer
- 10 types presets equalizer
- Preset reverb (6 types)
- Bass booster
- Size 1x4
- Home Screen -> Menu -> Add -> Widgets -> AudioFx
(This operation depends on a home application.)
- This widget was tested on Nexus One (2.3) and Galaxy Nexus (4.0) only.
** Caution **
This app uses the audio effects engine that is standard with Android OS. Some devices may have incomplete support for this feature. In this case, some or all of the functionality does not work, it may also cause skipping and distortion. These phenomena can not be solved by the application. Please be forewarned.
This app is a great way to get your feet wet in the world of ITC and EVP / Paranormal research.
The MAIN difference in BlackVox 2 from EchoVox 3 is that the reverb in BlackVox is applied to the mic INPUT as well as output sounds. Putting reverb on your voice and the returning echo. This is a new concept. EchoVox and GV-1 place the reverb on the sound files as they go out. Not on microphone input. Recording from BlackVox is meant to be on a seperate device or EchoVox to keep CPU usage down.
BANK A = RADIO SWEEPS (SAMPLED) + NOISE
BANK B = HELL BANK (Dark, evil sounds from the left hand path.)
PLUG IN HEADPHONES FOR LIVE NON ECHO MONITOR / SPEAKER FOR ECHO.
THIS APP DOES NOT RECORD AUDIO. PLEASE USE THE METHOD OF YOUR CHOICE.
My apps are ghost hunter apps for ghost hunters and ITC/EVP researchers.
Brought to you by Big Beard Studios, Creator of EchoVox and SpiritVox The worlds most trusted creator of paranormal apps and software.
Download and use it with confidence!
Also useful for vocal effects in real time. Real time reverb. Real time guitar effect etc. (Via USB audio) Also makes a great voice changer app if you play with the reverb settings.
Do you have a good ear for music? Can you play a musical instrument?
It is not important anymore, because with this tool ANYBODY can play great music without any skills!
It is easy! Just select some background track and synth you like. And that's it. Touch the screen and feel the sound!
Code & Music by NightRadio (Alexander Zolotov).
Background tracks composed in SunVox.
Known solutions for some problems:
This first course –in our Audio Concepts series– is all about the basics of sound and audio. It touches on all the concepts and terminology that audio pros need to know as they dive into into typical, everyday studio activities. This includes the physical properties of sound waves—Amplitude, Frequency, and Waveshape—which are the elements of sound that are creatively manipulated in recording and mixing.
It also covers sound measurements and demystifies the terminology you see in plug-in graphs and mixers, like Hz, kHz, and dB, dBfs that help us find just the right settings for particular tasks. There’s even a section on how our human hearing works which is the basis for understanding the psychoacoustic perceptions that underpin many classic studio techniques and effects. Then there’s a very brief but serious look at hearing protection which is a very important but often overlooked topic.
So if your looking for a truly deep “sound education", tune into this course.
Table of Contents:
1. Introduction to the Audio Concepts Series
2. Sound & Vibration
3. Sound Transmission in the Air
4. Amplitude & Frequency
5. Gain & Level
6. Decibels: dBspl, dBu
7. Decibels: dBfs
8. Hertz (Hz) & kiloHertz (kHz)
11. Spectral Content: ADSR
12. Spectral Content: Distortion
13. The Ear
14. Fletcher-Munson Curves
15. Hearing Limitations & Protection
Auto backup files to Dropbox. Multipane layout optimized for editing sounds and song files on tablets. Pinch zoom gesture.
High fidelity CD quality music and audio recorder for Android. Visual Audio Editing! You can edit and cut your recordings! Ringtone maker.
This is the easiest tool to record for professional musicians, college lectures, taking voice notes, sending voice messages.
You can loop your recordings and play along. A virtual loop pedal!
Nothing compares to the sound quality. Send recordings over email, or podcast instantly. Choose recording (from 48000 khz to 44.1 mhz which is CD quality and compression rates and as low as 8000 khz Pause Button. Plays and records in background so that you can listen to recordings while doing other tasks.
Saves in OGG, AAC and WAV formats. Audio Recorder. Blog. Facebook. Twitter. Share. Ringtones creator.
How to Video: http://www.youtube.com/watch?v=WSzGtscG6YA
How to Playback: http://www.youtube.com/watch?v=MYZjJdtizQg
How to Compress to MP3 using 3rd party app: http://www.youtube.com/watch?v=UR_F0LyLiUU
Now other Android developers can compress from WAV to OGG or AAC using HiFiCorder!
This is an easy and simple voice recorder, and this is a great music recorder. This is also an effective recorder for college lectures, medical notes doctors, lawyers notes , student lecture notes and recording your college professor in any topic such as economics, technology, recording technology, and recording studios. HiFiCorder is a recorder for memories, and a recorder for dreams.
-Multi pane layouts optimized for tablets
-Auto backup files to the cloud
-Faster AAC Encoding!
-Cleaner Holo Theme
-Improved Audio quality
-Landscape mode / Tablet Support
-Ogg Encoding is now realtime, no more waiting for "compressing" dialog to finish!
-AAC Encoding has been introduced! AAC encoding is realtime on Android 3.1 and above!
-Auto-detection of files inside the HiFiRecordings directory!
At Last, low-latency guitar effects on the Android platform. Since the Dec 2012 release of usbEffects, USB In and USB Out now supports moderately low latency which allows for a very enjoyable guitar experience.
Because USB Audio does not work with every Android device or USB device, please try out http://githarastudios.com/downloads/usbEffectsLite.apk before buying this product.
The amp sim itself is very basic but includes a realistic tone-stack for nice guitar tone. This app also has a number of virtual guitar effect pedals including:
Distortion (Green Scream)
Heavy Metal (Metal of Awe)
Phasor (Phase Off)
Basic Looper (Loop Hub)
All these effects are now configurable so you can generate a great range of sounds. The Dry layer, while aimed at Bass players, supports maintaining bass while applying effects to mid and top, or vise versa.
In addition, a basic guitar tuner has been integrated for ease and convenience as well as a Metronome and ability to play WAV files as backing tracks.
In order to use this Amp Sim, you need:
1) A , Nexus 5, Nexus 7, Galaxy S3/S4, Sony Xperia U,TX, Galaxy Note 2/Note 3, Galaxy Tab 2/3, HTC One, Galaxy Nexus or other Android device that supports OTG USB audio.
2) OTG USB cable to suit your device like (http://www.amazon.com/Female-Adapter-Converter-Google-tablet/dp/B00C93Y9IU)
3) USB Guitar cable like
4) An electric guitar.
5) Fingers that can play guitar!
Instructions for use:
1) Connect Guitar and (optionally) headphone or amp to USB device.
2) Connect the OTG cable to the USB device.
3) Connect OTG cable to Android device and wait 1 second (USB's power light should come on).
4) Run usbEffects app.
5) Allow app to use USB.
6) If you want USB out (this is the one with low-latency) you need to go to the menu and select USB as the "Output Type", then hit the back button.
7) Start playing.
Permissions: Internet/LAN/Wifi permissions are only used for Wifi output feature.
External storage (SD card) is used for playing backing tracks and reading and writing Loops (in proprietary format only at this stage).
Not all Android devices support USB accessories by powering the USB bus. Some Android devices such as Galaxy S1, S2 do not support USB Audio. This app is not compatible with all USB devices, and in particular, "3D sound card" type USB devices are not recognized by Android and cannot be supported by this app. Finally when USB devices are powered by your phone, the battery may run down more quickly.
If you have problems with this app, or suggestions for improvements, please check our FAQ and/or email the developer.
Reverb Time Calculator allows you to estimate the reverberation time of a room making your design from a database with over 200 materials (PRO version) arranged in 18 categories and regularly updated.
The estimation can be performed using the following methods of calculation:
- Eyring (PRO version)
The results given in each design allow to visualize an estimate reverberation time expressed in octave bands (125, 250, 500, 1000, 2000 y 4000 Hz).
These results can be compared with the RT60 values recommended depending on the use to which will be allocated the room (recording studio, broadcast studio, conference room, ...) and its volume, and lets change the materials used to fit desired reverberation times.
The materials available for the design of the room are contained in a database with over 200 materials (PRO version) classified in 18 categories:
Concrete, Bricks, Cellulose , Corks , Crystals, Foams , Cotton Fiber , Fiberglass , Rockwool , Wood, Metal, Furniture , People , Plastics , Rocks , Fabrics , Miscellaneous and Gypsum.
To select each item , you can view the absorption coefficients of each material graphically.
In Lite version the database contains 38 materials (2 materials per category).
Optimized for use in both Smartphone and Tablets.
Currently the application is available in English and Spanish.
Update Your Status from the Road
The ReverbNation Control Room App lets you post status updates to ReverbNation, Twitter, Facebook, and Myspace.
Manage Your Shows from anywhere
With Control Room, you can add, view, edit, and delete upcoming shows, as well as track attendance for recent events.
Check Your Stats
With the Control Room App, you can track your Band Equity, see Fan stats like Fan Count and Fan Heat Map, and also see how often fans are listening to your songs and watching your videos.
Send FanReach Emails from Anywhere
The ReverbNation Control Room App is deeply integrated with our signature FanReach email system. This App allows you to send emails directly to fans, see the statistics on the emails you sent and add fans directly to your FanReach email list. That’s right - no more clipboards and pens at shows to collect fan emails. Download the ReverbNation Control Room App and you can instantly start collecting fan information on your Android phone.