Your Motherboard / Ethernet-Card need to be compatible with the wake on lan protocol (most are) and you have to enable the features in your BIOS settings and your operating system.
This App MAY work over the Internet but theres no guarantee.
This App contains an App-Widget.
You need a WLAN-Router, PC/Notebook, an ethernet crossover cable and an Android Device (of course).
* Connect your PC and your router with the crossover cable.
* Your router must allow UDP Broadcast packages to be send.
* Enable WOL in BIOS and your Operating System.
* The get the IP-Address (and in some cases the port for WOL) of your PC.
* Connect your Android Device with your WLAN-Router and enter the IP-Address (and the port if needed).
* Click on the Hostname of the PC you want to wake up.
****MOST PC'S WON'T WORK IF THEY ARE NOT IN STANDBY OR SIMILAR STATE****
* For this app to work, you need to make sure that your computer and network is set up for and supports Wake On Lan / WOL *
Automate waking up your computers by sending an intent broadcast from apps such as Llama and Tasker!
In the latest version there is now support for Tasker plugins to make it even easier to automatically wake devices.
Instructions on how to do this are available in the latest version of the app under the help section.
Quick Feature List
* Network Search (Find devices on your network and add them to your list. No more finding out MAC addresses etc!)
* One touch wakeup widget for both devices and groups (A widget with online status is coming soon)
* Tasker plugin
* Intent Broadcast support (See instructions inside app help section for details on this)
* CSV Import/Export - So you can share your list of devices easily!
* Material Design (Taking suggestions on this!)
* Auto-Refreshing Device Online Status (May have issues on Android 4.3 and lower, currently looking into a fix)
* Supports Wake On Lan(WoL) and Wake On Wan(WoW)
For WoW, just set the broadcast address to be the remote IP address of the device. This may require some extra setup on the remote network to make sure that the wakeup packets actually arrive on the remote device.
If you're trying to wake up a device that is connected via WiFi it may not work, there's not many WiFi cards that support the WOL standard. WOL works best via an ethernet connection. Some devices such as laptops may not support WOL very well or at all. Some might only work when they are in sleep mode, and others might allow you to turn it on when it is powered off.
Photos/Media/Files/USB Storage - This is used for reading/writing CSV files to your internal storage so that you can copy your list of devices to other devices easily.
Network/WiFi - This is so that the app can actually send the magic packets to wake up your devices. It is also used in the network search screen and for pinging devices to see if they are online.
Italian - Davide Salvatore
Vietnamese - Altra Nine
Dutch - Ackuna website
Russian - Павел Монахов
German - sendyourmessageto & ngdeinhardt (Don't know their real names)
If you want to help translate Wake On Lan into your language please visit: http://translate.mr-webb.co.uk
If your language isn't on the website, please email me and I'll add it!
If you have any suggestions for Wake On Lan, please drop me an email and I'll see what I can do!
IP Address or Domain Name Support
UDP Port 0-65535
Toggle Broadcast (Sends on broadcast address)
Send Multiple Packets
Tasker and Locale Plugin
Computer needs to support WoL. Go here for help: http://goo.gl/S9DF
A widget is now available to wake your device from the Home screen.
Material design and Android 5.0 (Lollipop) support.
The WakeOnLan application enables you to wake up a computer on the local network (Wake on LAN), but also any computer on the internet (Wake on WAN) simply using your phone.
Wake on LAN is not available on all network cards but the most recent ones are often compatible. To take the most of this technology you might have to change some settings on your router or computer. For more information you will find many tutorials on Google.
1) Your computer must support Wake-on-LAN. You can enable it in the BIOS.
2) To wake over internet, you must forward packets from any port you want to the computer you wish to wake.
For example on a computer are any files or photos you want in the moment.
With this application, you can always turn on your computer and then use it using the remote control.
Detailed description and setup here: http://develop.freask.ru/en/?p=5
What is needed:
- A computer connected to the router via Ethernet
- Set up the BIOS on your computer Wake On Lan (a function that allows you to turn on the PC via LAN-cable)
- The router is configured with SSH or Telnet connection from outside
- Installed on your computer and smartphone TeamViwer for remote control
In the application settings fill in the connection information:
- The address of the router (IP or hostname)
- MAC-address include computers
- type of connect (Telnet or SSH)
Next, click "SSH to router" and will take place as soon as the connection you can turn on your PC.
After switching to it, you can easily connect via TeamViewer.
For all questions ready to help and answer, write to the post email@example.com
With WOLdroid you can send Wake On LAN (WOL) Packets to a Computer via WLAN. You can add and remove PCs (only MAC Address and Name nedded, no IP Address) to a list and start them by clicking on a button.
With status indicator (on / off)
(works only in WLAN)
Then you will love this app.
● Type in the Mac und and the Broadcast of your computer and start him.
● If you don't know the Mac or Broadcast, you can scan your network for suitable devices.
● Save your devices in a favorites list.
● Wake up your computer through the internet (you should configure broadcast forwarding in your router)
● All inputs were checked (e.g. if mac input matches the correct format)
With WOL-Manager you can also add several devices to one group and wake them all together. The 'Instant-Wake' feature powers-on the specific devices instantly after you started the app, which is useful in case you always want to wake up the same devices or groups over and over again. WOL-Manager works with IP- and broadcast addresses, as well as with domain names such as DynDns.
Pre-condition is that your devices support Wake-On-LAN and that it is setup correctly within your local network. Also check your router settings if you want to use it with dynamic domain names from anywhere in the world.
Works with an IP address or Fully Qualified Domain Name and even local Domain names as long as DNS can do a lookup.
** This version is the same as https://market.android.com/details?id=com.depicus.wakeonlan but is advert supported
Full information about Wake On Lan can be found at http://www.depicus.com/wake-on-lan/welcome.aspx
NB: Wake On Lan and Wake On Wan will not work to wake up a computer using only wifi although you can use this application to wake up machines if you are connected to wifi or 3g. Also note that some Mobile Operators block UDP over their networks, try using a higher port number e.g. 4343
It has to be allowed to wake up the computer by the network (by magic packet).
If you like this app, don't forget to rate it!
- regular WOL
- automatic WOL upon obtaining Wi-Fi connection
- quiet-hours (period during which automatic WOL will be suppressed)
- idle-time (period from last Wi-Fi disconnect during which automatic WOL will be suppresed)
- auto SSID discovery
- FQDN WOL broadcast support
- Auto-WOL notifications
- WOL widget shortcut
App is released under GPLv3 on github:
If you find any bugs, please contact me, so I could fix it. Hope you enjoy the app! :)
Keywords: auto, automatic, wol, wake on lan, wake-on-lan
ATTENTION: If the app does not work on your device upon installation due to third party modifications, you can uninstall app within Google Play 15 min trial period to avoid being charged. Reverting to Stock Android or system upgrade might resolve issue. This app has been tested fully functional on devices listed below (list updated regularly).
HELPFUL GUIDE: Tap Settings button to disable/change Notifications or to set customized shake profile settings. ALWAYS deactivate then activate service to apply changes. Tap service LED indicator button for info on adding on/off button widget to HOME screen. To activate service, select shake profile and tap Activate button which will pin the service to the notification status bar and cause a notification sound indicating service is active. To get back to the main app, tap the wake up icon in the status bar. If activated, Wake Up Screen service will remain active even after rebooting tablet or phone. To deactivate service run the app again and tap deactivate button or use the widget button. Tap Help button for full instructions.
SMART APP FEATURE: If the screen wakes up and no user activity detected, the screen goes back to sleep after few seconds! You can easily change sensitivity profiles: wake up the screen as you pick up the device (High Sensitivity) or after few to many shakes (Less Sensitivity)! Service indicator LED and on/off widget button! Battery Saver Period setting (optional)!
IMPORTANT TO KNOW PRIOR TO INSTALLATION:
1. This app requires shake algorithm enabled devices.
2. This app requires “boot” and “keep screen on” permissions upon installations.
3. This app may not function on rooted devices or third party ROMs that disable “wake screen” activity.
4. This app uses between 4 to 8% of battery power and about 7 MB memory which is very low compared to system use. If needed, you can easily deactivate app processes to save battery use with the service on/off widget button.
5. This app does not alter security settings or lock screen configurations.
Finally: We encourage our users to contact us via email to discuss any concerns or suggestions regarding the app, if any. We cannot address review comments due to the fact that most negative comments that are left without prior contact with the developer are placed with the intent to lower app ratings and misguide the consumer.
App Statistics - Tested & works on:
4.1 - 4.2 - 4.3 (Jelly Bean)
4.0 - 4.0.2 - 4.0.3 - 4.0.4 (Ice Cream Sandwich - ICS)
3.2 (Honeycomb - HC)
2.3.3 + (Gingerbread)
2.2 - 2.2.1 (Froyo)
Acer: Iconia Tab A200 Picasso E , Picasso Tablet
ASUS: Eee Pad Transformer TF101 , TF201
Google: Nexus 4 (Mako) , Nexus 7 (Grouper)
HTC: One S (Ville) , One X (Endeavor) , Evo 3D (shooter), Evo 4G (Supersonic) , Evita , Incredible 2 (VIVOW) , Incredible S (VIVO) , Nexus One (Passion) , Rezound , Sensation 4G (Pyramid) , Thunderbolt (Mecha), Desire HD (Ace)
Huawei: MediaPad hws7300u
LG: VS840 Lucid 4G (Cayman) , Revolution, Spectrum (LGE VS920 4G)
Mach Speed: Trio Stealth G2
Motorola: Droid RAZR , Droid RAZR Maxx 4G , Droid 2 Global , MOTOACTV
Samsung: Conquer 4G , Galaxy Nexus (Maguro) , Galaxy Note (GT-N7000), Galaxy S3 , Galaxy S2 , Galaxy S, Galaxy Y
Novero: Solana Tablet/Netbook
Sony: Ericsson SEMC Xperia Arc S , Xperia P (LT22i)
Velocity Micro Cruz T103
Copyright 2012 wildroid.com