This App interacts with a Garage Door (GDO) Secure Server Solution enabling your Android to securely control and monitor your garage door using Wi-Fi or an Internet connection. When paired with our GDO Server Solution, this App can be configured to work securely over the internet using an advanced auto-pairing/cipher technology (patent pending) that can be configured to offer over 256 bit encryption. This secure App technology virtually ELIMINATES unauthorized access to your home. We have tested this system for over one year to assure the best possible security, ease of setup and simplicity of use.
Using the App’s administrative functions you can remotely (thru the Internet) change the door password at will, thereby controlling when pre-authorized Wi-Fi users can access the door. Other features include the capability to administratively lock out all internet door users that you may have previously authorized, and to disable all paired devices in the event someone lost or misplaced a phone that can open the door.
DEVICE AUTHENTICATION FEATURE:
This App’s security model is designed to automatically pair (via Wi-Fi) with a local GDO Server. The pairing process exchanges unique information between the App and the GDO Server (i.e. authenticates a phone). Once paired, ONLY an authenticated phone can access the Garage Door. This means that your phone must physically be at your garage door to pair up with a GDO Server – after that, you can roam the internet and ONLY the paired Phone (given the correct password) will see the door’s status and can issue encrypted commands.
SECURE GARAGE DOOR OPENER (GDO) SERVERS:
The GDO Server is an internet appliance that plugs into your home router and connects wirelessly with 99% of all garage door systems. It is required for operating and monitoring a real garage door – see the WHAT'S NEW section for a link to obtain this hardware. Our GDO Server has an embedded web app page that allows most WiFi capable devices to operate as a WiFi garage door remote. We also offer/develop a variety of low cost, software solutions (source code included) that implement the GDO Server on various platforms such as Linux, Windows, Microcontrollers, Android OS, etc.
NOTE: The level of encryption we have developed for our FULLY ENCRYPTED GDO Hardware Servers may not be sold outside of the United States at this time. However, we do offer non-encrypted GDO Server solutions that can be run on any Linux or Windows server and can leverage your own WiFi router encryption. This software can be licensed/downloaded from our site along with garage door interface specifications.
GarageMate is trusted by thousands of users worldwide and is the most secure garage door opener. The simple installation takes 2 minutes. Even if someone else has the GarageMate App they will not be able to open your garage without your permission.
Compatible with Genie, Liftmaster, Chamberlain, Sears Craftsman, Raynor, Wayne-Dalton, Axis Cam, AccessMaster, Somfy, and virtually every garage door open built in the last 30 years. We also work with older openers (50 years), just tell us before ordering.
Only phones that have been previously paired to the GarageMate Receiver can open your garage door. The pairing process requires physical access to the receiver so it it not possible for someone else to pair their phone to the receiver.
The GarageMate App is FREE. And you can buy the latest low-cost Bluetooth4.0 receiver from us or DIY.
We performed extensive fail-safe testing in below freezing temperatures (-40F), above 140F, high humidity, power loss problems, and many other situations. Even under extreme conditions, the receiver never opens your garage door accidentally. Also, because you can password protect your phone and the App, we believe this is the most secure way to access your home. With password protection, if you lose your phone no one can enter your home. The same can't be said for keys and your other garage door remotes.
Thank you for the download and support.
Additional Tags: Garage Mate, BlueMate, BTmate, BlueMate.com, BTmate.com, GDMate, GD mate.
Download the GoGogate app to open or close your garage door or gate with your Android.
This App works with the GoGoGate device that can be purchased separately at www.gogogate.com.
The GoGogate app will connect your Android to the GoGogate device via your Wi-Fi home network or internet.
-This APP (when used in conjunction with the GoGoGate device) will open up to 3 garage doors
-Garage door status alert: Shows if your garage doors are Open or Closed
-Clean, Intuitive and User Friendly Interface
-Unlimited number of users can download the app and operate a single garage
-100% Secure with 128bits encryption technology
Compatible with all Garage door openers..
The GoGogate device can also be configured via the APP to operate other relay based products such as electric blinds or sprinkler systems.
Installation video link:
Few examples of the parameters you can set are:
Allows you to manage Applications and Widgets on your phone. Backup and restore apps.
-batch backup, install
-backup(restore) to(from) email
-stop running process.
Please email us if you have questions. We can't answer here.
It uses a smart and intuitive interface for easy control of connected devices like lights, locks, thermostats, smoke alarms, cameras, sprinkler systems, and more from these leading brands: Bali, Dropcam, GE, Honeywell, Kidde, Kwikset, Lutron, Leviton, Schlage, Philips, Quirky, Rachio, and TCP.
Wink makes setup clear with step by step guides and videos. If you ever need help with anything, you can talk to a human on our customer support team 24/7.
Wink is free to download and doesn’t charge any fees for use.
Many products work directly with the Wink app. Other product use the Wink HUB to get connected. The Wink HUB allows your diverse collection of smart products to speak the same wireless language so you can control them--and customize their interactions-- from the Wink app.
Shortcuts - Make simple buttons to quickly access your favorite settings.
Activity - Schedule and monitor everything in your home.
Robots - Automate your home by building virtual robots to do things for you.
QPair is REQUIRED for this app
QPair is a software solution by LG that allows 2 devices (Tablet & Phone) transfer basic data between each-other.
Dropair is a file transfer solution (sync will follow) that allows sending files between devices easily.
1. Install Dropair on both devices.
2. Make sure Dropair is running on both.
You can now browse between the devices and transfer files. without complicated additional pairing tasks.
THIS APP IS PART OF LG & XDA Competition,
Please be kind enough to vote for it - here:
Keep in-mind this is a preview-release!
While it is functional it does contain bugs and not fully stable.
This app is open-sourced. source code will be available within approx. a month.
For additional help/updates/details/permissions explained/etc..
LG Backup lets data migration from old smartphone to new LG smartphone. When migrating to LG G3, backup data can be transferred directly between smartphones using Wi-Fi hotspot feature. If both sender and receiver phones are LG smartphones, use pre-installed LG Backup app instead of downloading this app.
Contact, Calendar, Bookmark, Message(SMS), Photo, Video, Music, Documents, Voice Memo
Sender - Android Gingerbread and above
Receiver - LG G2 and beyond (Direct Wi-Fi transfer from LG G3)
Some functions may be limited depending on smartphone manufacturer/model.
HubToDate offers you a way to easily sync your devices and perform the same stuff at once. If you want to sync the WiFi status or sync the clipboard you’re now able to do so with just a shake. Shaking your device is one of the several ways you can activate HubToDate. Don't hesitate and give it a try! You just need one QPair enabled device and another device running a recent version of Android.
- Handle installs or uninstalls on both devices
- Sync your foreground app
- Sync the brightness across devices
- Sync WiFi or Volume state
- Turn your QPair device screen off
- Control your peer's audio (Music only)
- And much more!
You can easily add the barcode input function to an existing application
and the browser screen. In this application, the limitations of the scanning
times are up to 50 times because of the trial version.
The suffix (button action) attached when the barcode is read can be
registered up to two kinds. Moreover, because another suffix of each barcode
type can be registered, the input operation in the browser screen can be simplified.
Scanner support: BW-130BT
Android compatible version: 2.1Update1 more
Open your garage door with your Android device !
Please visit the application home page for instructions on how to configure the WiFi module and how to build the electronic board.
This application is not affiliated with, endorsed, or sponsored by Roving Network or Microchip Technology Inc.
Copyright 2014 Cedric Priscal
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Use Android Bluetooth mobile device to remote control your device with Serial TTL Bluetooth Module and Arduino Board.
For Automation System ,Smart Home Automation ,light control etc.
The program features.
- Control up to 8 devices.
- Can be set Timer to ON / OFF the device and show the countdown timer.(Timer can be set to 1 minute, 15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours).
- Change and Edit your Device Name. ( Version 1.6+)
- Free Version with AD
PRO VERSION ( NO AD )
1. Serial Port Bluetooth Module( TTL )
2. Arduino Microcontroller Board ( we use ET-BASE AVR EASY328 Arduino compatible)
3. 8 channel Output Relay Board
More info about hardware :
Wiring Arduino Pin Diagram
Output 1 to Pin 4 ( Arduino Board )
Output 2 to Pin 5
Output 3 to Pin 6
Output 4 to Pin 7
Output 5 to Pin 8
Output 6 to Pin 9
Output 7 to Pin 10
Output 8 to Pin 11
Bluetooth Module Tx to Pin 0
Bluetooth Module Rx to Pin 1
A data transmission via Bluetooth.
Device1 ON sent “A” , Device1 OFF sent “a”
Device2 ON sent “B” , Device2 OFF sent “b”
Device3 ON sent “C” , Device3 OFF sent “c”
Device4 ON sent “D” , Device4 OFF sent “d”
Device5 ON sent “E” , Device5 OFF sent “e”
Device6 ON sent “F” , Device6 OFF sent “f”
Device7 ON sent “G” , Device7 OFF sent “g”
Device8 ON sent “H” , Device8 OFF sent “h”
More info about Apps :
Full Android Source Code. It cost 30 - 100 USD.
Please. contact firstname.lastname@example.org
29 Jan 2013
Help you free memory to run other apps and Save power.
Simple and Easy user interface.
Stylish quick launch icon suits your HTC / Google phone.
* Manage running apps easily
You can open, uninstall, kill, or view detail of the running app by a long press.
* Quick launch icon
HTC style or Google style quick launch icon will show on the status bar (Screenshot 1 & 2).
* Ignore list
Process Manager won't kill apps in this list.
* Multi language support
English or Chinese, choose from your locale automatically.
The App is currently in a beta state, that means it is buggy I'might not work with all devices.
The app is mainly developed for remote control of Android TV sticks but as well works with a wide range of smart phones and tablets.
The app is separated in two parts:
1. Pressing the "Stream" button allows screen sharing and remote control of the current device. Only that mode requires ROOT PERMISSIONS
2. Pressing the "Connect" button allows you to see the screen of a streaming device and as well remote control it. That mode does NOT require root permissions
For streaming your screen and/or been remote controlled you need ROOT permission!!!
For what can I use this app?
- Introducing a presentation (the App supports multiple users connected to one device at the same time)
- Supporting friends and people in need f.E. by remote configurating an app or by showing what actions need to be proceed
- Showing videos or pics to friends without even downloading them
- Screen sharing
- Remote control (Android device and PC)
- Multiple user support
- Connection Managment
- Wifi and 3G (Local Network and Internet)
- Applet Support -> allows the receiver to be any Java enabled device (Windows/Linux PCs as well Mac).
- Applet Support for internet connections
Feel free to contact me if you want to use that application for comercial use or integrating it into an Android image/build.
NetOK takes virtually zero battery, which makes it ideal to have running at all times, giving you great feedback on your current Internet quality. If you haven't already, you will quickly realize that signal-strength and Internet experience does NOT go hand in hand -- at all.
NetOK is highly configurable, but comes with good default values for those who don't care.
NetOK has too many use cases to even bother giving examples. Please write your own use cases in the reviews!
PLEASE NOTE that sadly not all phones are supported! There are so many Android phones on the market, and I cannot possibly test them all. If NetOK tells you that the device is not supported, please, instead of giving me one star, contact me (email below) with device information.
Graphics by Jiwe, www.jiwe.se.
App by Daniel Åkerud, Purple Scout AB, email@example.com
Keywords: ping, internet, latency, quality
Silence. Secure. Shutdown.
Eluder is designed to effectively and quickly remove you from any program, media file, or application
that you have open and need to promptly shutdown service. Ever been at work and your boss walks by
and you’re scrambling to exit whatever you maybe utilizing or viewing on your phone? Or maybe you
were viewing sensitive material that is for your eyes only. Simply locking your phone does not always
stop media from continuing to play and unlocking the phone in front of somebody leaves that material
just sitting there for easy viewing. Eluder allows you to silence and shutdown all media, sounds, and
open applications at the touch of a button.
Exit open apps and return to home screen or lock phone
Silence all media including audio and video
Customize to have Eluder easily accessible from your notification bar or with our floating icon for one touch use (Premium Feature only)
Great way to hide your Flappy Bird obsession!