Watch Trigger is an Android & Pebble app combo that allows remote capture of photos. Say goodbye to hurriedly rejoining your group photos!

Features:
- Remote capture of photos using a Pebble watch.
- Options adjustable from the watch app (SDK 2.0)
- Confirmation of connection to Pebble in both Android app and watch app.
- Timer countdown similar to the stock Camera app, but adjustable using the watch app.
- Instant review of captured photos, or continuous capture without reviewing.
- Vibration to warn of the end of a countdown at 2 seconds. Smile!
- Choice of front or rear-facing camera

1. Install Twistie app on your phone and Pebble
2. Open "Twistie Pebble" phone app to take a selfie or group-shot
3. Rotate/Twist your pebble to take a Selfie.

Pebble app can be found @ pebble://appstore/5513112d369eea6b9100001e

*Don't be fooled by the lack of screenshots, this app works in the background and cannot be shown with screenshots!

Grab the Spy.pbw for the pebble watch here at the Pebble Appstore: http://pblweb.com/appstore/52e1b327318d6ebb1500010c

^^^^ Be sure to always stay updated with the pebble app as well or errors might occur between communications. Error reports are being submitted showing users have not updated their Spy app on the pebble appstore!

Finally take pictures, videos, audio recordings and more SECRETLY!
Let your Pebble SmartWatch and Spy Pebble turn you into a secret agent!
Loaded with features like:

Take videos with front and back facing camera with screen OFF!!
Take pictures(with front facing or back camera) with screen OFF!
Use your phones Camera as a Motion Detector and take pictures of video when motion is detected.
Send images to the pebble watch!
Start audio recordings with screen on or OFF!!
Start your phones voice recognition and have the conversation sent to your pebble watch LIVE!!
Turn your phones flashlight on with out searching your phone for an app to do it, just use your watch!
Silence and unsilence your phone!
No battery drain!!!

This app can also use all the features above with the screen on and will not display what the app is doing or interrupt the device user!!!!!

Remember this is a Spy application, its meant to be low key in what it does, most of the functions should be done with the screen off. If there are times you use them with the screen on and dont see anything happening thats because its suppose to be that way.

Requires
• Pebble Instant Watchface
• Pebble Firmware 2.x
• Android version 4.3+

NOTE, if you are updating from v1.4, reboot your phone after the installation.

You can download the watchface directly from the Pebble App Store.

For previous releases of the Watchface archives here:
https://drive.google.com/folderview?id=0B0I9I-I9TCdxN0psQmE4ZmtnN28&usp=sharing

Supported Apps:
https://sites.google.com/site/mypebbleinstant/home/supported-apps

Google+ Community:
https://plus.google.com/u/0/communities/102398444445267137964

Join the Beta for the latest
https://plus.google.com/u/0/communities/116435550796167668553

Facebook Page:
https://www.facebook.com/PebbleInstant

This is an upgrade to Watch Trigger for Pebble, containing the most oft-requested (and fiddliest to implement) feature: Video triggering!

But also included are:
- Improved watch-app that adapts depending on the shooting mode
- Revamped settings menus
- Auto start mode selection
- My utmost gratitude for contributing to development!

Displays:
• GPS state
• NFC state
• Battery level
• Wi-Fi Hotspots
• Wi-Fi signal strength (updated in real-time)
• Phone signal strength (updated in real-time)

Customizable! You can choose the order and number of the switches.

Notes:
• Mobile Data toggle works on Android < 5.0 or rooted Android 5.0 and above.
• Phone signal strength don't work on some devices.

If you find any bugs or you have any suggestions, please email me at shuisky@gmail.com in order to correct or implement it.

Pebble Messenger allows you to set some pre-definied responses you can use to reply to SMS and WhatsApp messages from your Pebble without using your phone.

You can also write a full message with our system: it's similiar to the old T9 system we had on our old phones, so using it is simple and you will get used to it easily!

Note that replying on WhatsApp requires root permissions, so the first time you'll use the app, check your phone: it will ask for them.

This app will only work with Pebble firmware and Android app v2.0

You will need a Pebble Watch to get the most out of this app! http://www.getpebble.com

If you encounter problems installing the latest Canvas watchface to your Pebble, please see the FAQ.

User guide: http://pebblecanvas.blogspot.co.uk/p/user-guide.html
FAQ: http://pebblecanvas.blogspot.co.uk/p/faq.html

With Canvas, you can:-
- Design watch-faces for your Pebble, on your Android phone
- Control the size, position, format, font, colour and alignment of every item. Drag to move and resize
- Animate anything on your watch-face, and vibrate when content changes, dynamically resize layer, and invert
- Add images, or even an analogue clock!
- Include world-time from any timezone
- Add countdown timers, to a time controlled on your phone
- Switch watch-faces from your phone, only requiring one precious slot on your Pebble
- Share your designs, and download others' on the Canvas Screen Store!
- See the state of your watch (battery level, connection status)

Your watch-faces can use any time format that you wish, including the popular 'text watch' format.

You can also include dynamic content which will update continually from your phone:
- Your next calendar appointments (on supported devices ICS+)
- Missed call, Unread SMS counters
- Unread Gmail counters for any labels
- Phone battery percentage
- Phone sensor status (temperature, humidity, pressure on supported devices e.g. Galaxy S4)
- Weather
- Any content from Tasker
- And anything else via plugins - example: https://play.google.com/store/apps/details?id=com.pennas.canvasnowplayingplugin

And share any watchface that you design with other Canvas users! Use the 'Share' function on the Edit screen. A shared .pcs file can be loaded back into Canvas

Instructions: please see http://pebblecanvas.blogspot.com/p/user-guide.html

Developers: see http://pebblecanvas.blogspot.co.uk/p/plugins.html for information on creating content plugins for Canvas

Limitations:
- Pebble does not yet support persistent storage. This means that every time you select the 'Pebble Canvas' watch-face on your Pebble, it must communicate with your phone before it can display anything. After this, it will continue to display all non-dynamic content even if connection to your phone is lost.

Support:
- Please submit any bug reports if you do encounter an issue. You may also submit diagnostics from the 'About' menu to help diagnose any problems
- Please email me with any problems/issues/suggestions. This is a lot easier than responding via the Google Play comments system

Permissions:
- WRITE_EXTERNAL_STORAGE - send watchface to Pebble app, share screens
- RECEIVE_BOOT_COMPLETED - update pebble when phone starts
- READ_CALENDAR - display upcoming calendar events
- READ_SMS - Get SMS unread count
- READ_CALL_LOG - Get Missed calls count
- gm.permission.READ_CONTENT_PROVIDER - Get GMail unread counts
- GET_ACCOUNTS - Get GMail accounts
- ACCESS_COARSE_LOCATION - Get location for weather
- INTERNET - Get weather
- READ_CONTACTS - some devices need this for missed call updates
- VIBRATE - Test vibration patterns on your phone
- ACCESS_WIFI_STATE - Show current wifi information on your watch
- ACCESS_NETWORK_STATE - Check if you are connected to the internet or not

Companion Pebble watchapp shows Current Time, Date and Weather
- Allows the sending of pre configured SMS messages
- Tasker integration
- Calendar entries
- Unread SMS, Gmail, Missed Calls
- Reading of recent SMS
- Simple Stocks

See http://www.finebyte.co.uk for more instructions
Select 12H/24H from the main settings on the pebble watch

NOTE: This app only works with a companion watchapp available for download from the website.

Glance Classic includes 7 free layouts. Glance Analog, TextWatch and Watchface Editor require in app purchase. Other Additional features can be unlocked via the in app purchase.

Install Instructions:

Companion watchapp:
Run the Android app before running the watchapp.

See http://www.finebyte.co.uk for full instructions

Permissions:

android.permission.INTERNET
android.permission.ACCESS_NETWORK_STATE

Used to check state of network and make calls for Weather updates

android.permission.ACCESS_FINE_LOCATION

Used to get current location for weather updates

android.permission.READ_SMS
android.permission.SEND_SMS
android.permission.WRITE_SMS
android.permission.RECEIVE_SMS
Used to read and send SMS (including writing to the system outbox)

android.permission.READ_CONTACTS

Used to convert SMS phone numbers to names from contacts

android.persmission.READ_CALENDAR

Used to read the calendar

android.permission.RECEIVE_BOOT_COMPLETED

Used to start the service on boot

android.permission.WRITE_EXTERNAL_STORAGE

Logging

com.google.android.gm.permission.READ_CONTENT_PROVIDER
android.permission.GET_ACCOUNTS
android.permission.READ_CALL_LOG

Unread Messages Count

(Well, that and because it looks really cool.)

With Pebble Communicator you can even type your own SMS using Tertiary Text, an input method by vgmoose which allows you to write using only Pebble's three buttons.

You can read more about Pebble Communicator on its website, www.joaopluis.pt/communicator.

*The purpose of this app is to serve a Pebble watchapp. If you don't have a Pebble (or if you don't have the Communicator Pebble app installed), this app will be useless for you. The Pebble app is available at https://apps.getpebble.com/applications/532c923f7c7760a10c000096 .*

Features:
* See the last 30 contacts you texted or who texted you
* Read the last SMS in the conversation with a contact
* Reply to a contact, typing with Tertiary Text
* Reply using quick responses written on the phone app
* Check the sent SMS sent status (for the last SMS you sent through Communicator)
* SMS delivery reports (can be turned off on Communicator's Android app)

The bluetooth icon is normal when connected, white when disconnected and it shows an airplane if it is off.

The battery icon shows the actual battery status and it has a charging icon.

Major features:

● All photographic parameters are adjustable and always at hand: exposure compensation, ISO, light metering mode, focus mode, white balance and program mode.
● DSLR-like viewfinder display: see exposure time, aperture and stops display with EV and bracketing settings, in real-time!
● Full fledged exposure bracketing: from 3 to 7 frames, unlimited stops spacing, plus custom EV shifting.
● Built-in intervalometer: make stunning timelapses (even bracketed/HDR timelapses) and time-controlled picture series.
● Program and Speed-priority modes.
● Long exposure support: take beautiful night photos and light trails with long exposure times up to 30 seconds**.
● JPEG, true 16-bit RAW in DNG format*, and lossless PNG photo capturing formats, perfect for post-processing.
● Manual shutter speed: from 1/80000 to 2", or the range available on your device*.
● All camera functions assignable to volume keys. You can adjust EV, ISO, color temperature and more using volume keys. Devices with hardware camera shutter key are also supported.
● EXIF and XMP sidecar metadata support.
● Autofocus, macro, touch-to-focus, true manual focus* and infinity focus modes. Autofocus lock feature (AF-L).
● Autoexposure (AE-L) and auto white balance (AWB-L) locks in Android 4.0+.
● In background photo and RAW developing and processing allows a smooth, uninterrupted camera operation.
● Digital zoom using multitouch pinch gesture. Also shows 35mm equivalent focal length!
● The most advanced electronic viewfinder: live RGB histogram, 10 composition grid overlays and 9 crop guides available.
● Powerful organization options: different storage locations and fully customizable file names (even with variables).
● The user interface is available in more than 30 languages.

This camera application completely avoids scene modes, instead you get full manual control over all photographic parameters, just like you do with a reflex camera, so you can ultimately control every aspect of the picture, and leave the post-processing to the computer. So after your DSLR, you will never miss a photo opportunity again, being able to capture it with the closer sensation to your DSLR as possible.

IMPORTANT: If you find a bug using the application, PLEASE, visit the web page http://www.camerafv5.com/ or write to support@camerafv5.com with your phone model name and the description of the problem, before writing a negative comment. Customer satisfaction is our priority, and we will do our best to fix the issues as soon as possible!

Connect with Camera FV-5 and stay always up to the latest information about current and future development. Visit the official website http://www.camerafv5.com, be a fan of http://www.facebook.com/CameraFV5, subscribe to http://www.twitter.com/CameraFV5 or watch tutorials at http://www.youtube.com/user/camerafv5.

* Requires Android 5.0+ and a fully compliant Camera2 implementation. Currently only LG Nexus 5 and Motorola Nexus 6.
** Requires Android 5.0+. Compatible as well on the Samsung Galaxy Camera (1 and 2), Galaxy S4 Zoom and HTC One (M8). On Android 4.4 or older, long exposures lowers picture resolution to 2 or 1 MP, depending models. The reason is explained here: http://www.camerafv5.com/faq.php#long-exposure-resolution

Permissions explained:

- Approximate location and precise location: only used for geotagging functionality (disabled by default, and requires manual GPS activation).
- Modify or delete the contents of your USB storage and take pictures and videos: required for the usual camera operation.

--- FEATURES ---

- 3 modes: camera, video recorder & panorama
- Silent mode (no shutter sound, might not work on some devices)
- Live FX photos: 12 effects (only on full version)
- Pebble smartwatch support (with live preview)
- Pinch to zoom
- Configurable volume keys
- Wide screen pictures
- Picture quality setting (low/medium/high/ultra)
- Configurable storage source (Internal/SD card)
- Countdown Timer
- Burst mode
- Guidelines
- Full brightness option
- Video/Audio quality configurable
- Accurate viewfinder setting
- UHD - 4K video recording (Samsung S5/S6 - Note 3/4)
- Immersive mode/Hide virtual buttons (Android 4.4)
- More cool features soon ...

--- FAQ ---

● How can I view the latest photos/videos taken?

Slide the viewfinder from right to left to quickly access the gallery/filmstrip view. You can quickly delete photos you do not like by dragging the unwanted picture up or down.

● Where can I change the camera settings?

You can access this mode by pressing the button on the bottom right or also with a long press on the camera viewfinder

● Why is not Photo Sphere included within the app?

Unfortunately this part of the code is not open source and can not be included within the application.

● I'm not happy with the app and I want a refund.

Please, send us an email to moblynx.us@gmail.com with the order number and we will refund you the money. No problem.

● Will you continue to work on improving the app?

Of course, we are working hard to add new features and improve compatibility.

--- THANKS ---

● Thanks to everyone who buys our applications. Your purchase helps us to keep working hard on this project. Please contact us at moblynx.us@gmail.com if you have any issue. We are delighted to receive any feedback.

● Thanks to Google for releasing the Android open source project. Without their great contribution to the developer community our work would not be possible.

--- NOTES ---

● Android is a trademark of Google Inc.

● This app is not affiliated or endorsed by Google Inc.

This application allows you to receive notifications from NotifyMyAndroid on your Pebble SmartWatch!

*** IMPORTANT: THIS APP DOES NOTHING BY ITSELF. YOU NEED BOTH THE NotifyMyAndroid AND THE Pebble APPLICATIONS INSTALLED AND SETUP ***

Features:
* Forward notifications to Pebble.
* Enable/disable forwarding of notifications
* Set minimum notification priority to forward

NOTE: You need to run the app at least once before any notifications will be forwarded!

SOURCE is available here: https://github.com/EnJens/NotifyMyPebble

More than 40 unique love watchfaces to show a special love to someone.

Works only with SDK2.