Momentan werden folgende Portale unterstützt:
Falls du ein Angebot mit deinen Freunden teilen möchtest, brauchst du nur lange auf ein Objekt in der Liste zu drücken.
Da ich nicht direkt mit den Anbietern zusammenarbeite, kann es zu Darstellungsfehler kommen, die möglicherweise erst ein paar Tage später behoben werden können.
More from developer
This is the Open Source Oscilloscope based on the Bachelor Thesis "Using Android in Industrial Automation" of the University of Applied Sciences of Northwestern Switzerland.
Note that this application is written for an embedded system for high speed data acquisition (runs on the Beagleboard) and this is a port to the phone/tablet platform.
It will use the microphone as input source, "USB" will only work with the hardware board from our project.
For more information about the project visit
-> (NEW) Tablet support
-> Mic Input, only working mono 44100[Hz] at the moment.
-> Cursor, Trigger, Offset
-> If you want to use it with our board (schematic at http://android.serverbox.ch) up to dual 6 [Msps], 8 bit A/D, no root needed :).
Tested on Nexus S, HTC Magic, LG P500 and Acer A500 3.1 Tab
If you want to add your own features feel free to download the and compile the source:
It enables you to monitor your Baby's room using your mobile phone. Download the Bluetooth Baby Monitor on two Android phones and place one in your Baby's room and the other one in your bedroom.
» No Network Connection needed
» No SIM needed (less power required, no additional costs)
» No WLAN needed for transmission (less power required)
» Voice activation
» Two initial Layout Themes
» Use anytime, anywhere
» See the battery level of the phone in the Baby's room
Download the app to have the Nap-Version running 30 minutes. You can upgrade to the unrestricted version inside the application.
The range of Bluetooth varies based on your environment and your device. Therefore, the app also displays the connection quality.
Features planed for the next version:
» Push to listen.
» Option: Alarm when Battery is low
Features planed for the future:
» Wifi/WLAN Support
» Record & Push to play lullaby
Exclusive For Android!
Important Note: By purchasing this application from here, you are supporting the Open Source project (hardware and software), and enable us to constantly keep the application up to date. Also you will always get the most recent updates from us directly. You can download the source code and the application at http://www.osciprime.com under GPL.
This is a fully functional Android Oscilloscope. It works with the standard microphone audio input as well as with our USB Oscilloscope. It replaces our legacy version of the "OsciPrime Oscilloscope".
*Best Experience on Tablets or devices with large Screens*
-> Powerful multi-touch functionality in an oscilloscope like never seen before
-> All basic oscilloscope functionality (Trigger, Interleave, Measurement, Attenuation, Offset, etc.)
-> Hardware Ready: With our OsciPrime Oscilloscope hardware, you can measure real voltage sources => http://www.osciprime.com
-> Customization: Measuring in dark environments? Set up your workspace theme-colors as you like to fit your requirements.
-> Export Screenshots to PNG for further use
-> 44100 kHz Mic input Mono
-> USB Oscilloscope 2x 8 bit 6 [Msps/s]
-> http://www.osciprime.com for more Info about USB scope specs
Currently working on:
-> Testing and improving Hardware
-> Adding Logging Support for the Android Application
-> Tinkering for an Ubuntu Version of the SW
Information regarding USB Oscilloscope Hardware:
We are currently developing a new hardware board, which we will make available for ordering under http://www.osciprime.com.
Refunds: You are not happy with our Oscilloscope, or your device does not support feature XY? No problem, we are refunding you even after the standard refund window! Just get in touch with us and we will try our best to resolve the issue or refund you.
Release 19 November 2013
+ Improved Graphics performance by removing unnecessary layer
+ Font size refined to scale better with displays
+ Fixed misbehaving lower bar on 4.4 (Nexus 5)
Release 22 November 2012
+ Calibration Offset is now calculated as float (fixes bug with OsciPrime hardware)
Release 31 October 2012
+ Fixed Nullpointer in Audio Source
+ Added Buffer Preview and Window
+ USB OsciPrime: Uses double the amount of Y-Space now
+ Added xxhdpi graphics
Release 19 October 2012
+ Added debugging Option for manually setting params on the hardware
+ Fixed issue with triggering on falling edge
+ Improved trigger results for low frequencies
+ Fixed notification issue
Release 23 August 2012
+ Temporarily disabled attenuation changed when source not running
+ Added a new offset parameter for every attenuation setting
+ Added option to fetch calibration of the USB scope from our webserver
+ Fixed a bug with the network sink where it would hang until client connects
+ Added option for fullscreen mode (experimental)
+ Added option to stop data acquisition when exiting the application
+ Changed the color palette
+ Changed app name to "OsciPrime" only
Release 27 Jul 2012
+ Redone calibration implementation
+ Handles are now more flexible and easier to add
+ Added Holo Dark Style Checkboxes
+ Added Network Sink and Source (experimental)
+ Added Clipping indication (see settings)
+ Fixed default zoom level for other resolutions
+ Added Button to activate probe compensation for USB
+ Externalized some Strings
Using Bluetooth your phone can be used to scroll on your Desktop/Laptop.
Head over to our technical blog for instructions and the source code for the Linux side.
The source code demonstrates how to use Bluetooth and the Linux uinput system to emulate mouse movement or key presses.
*This tool only works with Linux (tested on Ubuntu)*
*The tool is open source (GPL) and you are required to compile the Linux source code*
Thanks for your support :)