Currently there are two input options for the application.
**** PLEASE ENSURE THE GABOTRONICS DEVICE IS UP TO DATE!!
***** USB SUPPORT ****** (only for android 3.1 and greater)
The newest and best input option is a USB hardware device provided by Gabotronics. USB host mode has now been compatible since android 3.1, therefore most new phones and tablets will support USB host mode (Please check device). NFX Oscilloscope supports the Gabotronics Xprotolab/Xminilab, this has 2 analogue input channels and 8 digital channels and measures a tiny 2.5 x 4 cm!! The device it's self is a cheap portable alternative to most mainstream oscilloscopes, and has many different features. Connecting the Xprotolab to the NFX Oscilloscope provides a powerful and cheap oscilloscope platform for your portable needs. For more information on the Xprotolab or Xminilab click the following links.
So match this application with the cheap device from gabotronics and you will get a great portable oscilloscope!
Note: Only the analogue channels and logic Channels are supported on the xprotolab/xminilab, future updates will bring digital and tone generator support.
Spec list for xprotolab:
2 Analog Inputs
Maximum Sampling rate: 2MSPS
Analog Bandwidth: 200kHz
Input Impedance: 1MΩ
Buffer size per channel: 256
Input Voltage Range: -14V to +20V
Currently the USB mode has been tested on Samsung Galaxy Nexus , Asus Transformer , Asus Nexus 7 , Samsung Galaxy S3
There has been problems reported with android version 4.3 and USB host, there is a major bug in the release, which is set to be updated at some point in the future.
Please note : Most devices will need a OTG cable to enable usb host mode. See phone specific instructions for more information.
***** Microphone SUPPORT ******
The second option is the microphone input to the android device. This can be used to attach a scope lead to the jack socket. More information can be found at the following website.
Features include, triggering for different impulse and continuous signals. In addition to this there is level measurement and fundamental frequency readings
It is possible to control the amplitude, time/div and trigger level whilst monitoring. Settings included trigger directions, sample rates and voltage span calibration.
Have a look at this blog for more scope cable information from a fellow user of Nfx oscilloscope.
Head to my blog for more information on the NFX Oscilloscope.
Version 6 finally brings USB support in collaboration with the gabotronics Xprotolab. This now means we are not tied down to the maximum sample rate of the phone!!! Head over to their website to see the full specs on the product.
If you are unhappy in anyway with this product, feel free to contact me and I will help all I can, if I cannot help I will offer a refund at any time (even past the 15 minute google refund mark)
Email : firstname.lastname@example.org
Thank you for purchasing, I hope you enjoy! If you have enjoyed this app leave a quick rating and comment. Thanks!!
It can be used with a phone or tablet without a computer.This means there is no any wired connection to the phone or tablet, which can guarantee the safety of your device.
The oscilloscope is the most frequently used, most flexible device for electric measurements.
It visualizes an electric potential over time function, producing much more information than other potential and current measurement methods.
With an oscilloscope the following quantities can be either directly or indirectly measured:
direct voltage, alternating voltage, direct current, alternating current, time, time delay, phase, phase difference, frequency to view live waveforms, make measurements.
Demo mode available.
Displaying the audio waveform captured from a microphone.
Accelerometer waveform, x y z.
Measure: frequency, min/max, peak-peak
FFT for microphone input.
Shows trigger level information
Save screen captures from your instrument onto your mobile device
Save signal to file in csv format.
Control the following functions
• start/stop/single acquisition
• change time/div
• change volts/div
• turn channels on/off
• select trigger type/level
• screen zooming
• double click on triggers sets them to zero level
Android 2.3.5 and up
Please email email@example.com to report bugs, ask questions or give us your feedback.
New in 1.3:
+ Display pulse width (for freq < 2.5KHz)
+ Automatic amplitude fits.
+ Frequency counter.
+ Lab tested w/ 60Hz to 20KHz sinusoid.
Please feel free to email us comment/enhancement request.
Designed for those who have older analogue oscilloscopes but have no onscreen measurement capabilities. I made this after getting fed up of using a calculator all the time to try and work out exactly what I was seeing onscreen. So I decided to make an Android App to do it all for me... Found it to be more useful than I thought as I now find myself using the scope more and more now I understand what I'm seeing! Buying this will fund me with coffee and sandwiches whilst programming more future useful apps :o)
- Frequency Calculation in Hz, kHz, MHz, GHz etc
- Rising/Falling Edge Time Calculation.
- Phase Calculator displaying results in Degrees, Radians, Quadrants, Frequency and time offset.
- RMS Calculator displaying RMS values of Square Waves (Various Duty %), Sine Wave, Triangle Wave, Sawtooth Wave. Includes adjustment for probe attenuation.
- Duty Calculator of a square wave based upon pulse on/pulse off duration.
- Amplitude Calculator based upon voltage, number of divides and probe attenuation.
- Ripple Calculator based upon voltage, probe attenuation etc (Added some ATX and USB information)
- Has a 'Keep Alive' option for the screen in the menu.
- All answers from the calculators can be copied to clipboard if you wish to move the answers to a 'proper' android calculator etc.
- All answers can be Shared amongst other Android Apps that support the Androids 'text' format. (SMS, eMail, Viber etc etc etc)
- All screens are scrollable and scalable so should support the smallest (~120ppi) resolution devices right up to the largest tablets out there!
It has cool analog vu meter and oscilloscope.
It can be used to verify if a sound is at same level for measuring loudspeaker response.
The app is intended for fun and it does not provide accurate measurement in decibels.
■ 30 to 102dB range
■ local peek/max values display
■ response mode: fast/medium/slow
■ analog vu meter
■ digital vu meter
■ support for tablets and landscape mode
■ support for calibration
* Free distance meter
* Measures the distances of nearby objects in realtime
* Visualizes the results as a diagram
1. Tap to start scanning
2. Move the device back and forth to identify the target's sonar echo
3. If necessary, move the device sidewards to escape interferences
4. Place the device at the desired position
5. Optionally, tap to hold results
6. Read measured distances
* Try both microphones via the settings menu
* Try different volume levels
* Don't cover the speaker or microphone
* For a first test, hold the device at about 1m distance in front of a wall
Entertain and teach young kids as they watch the screen change according to the noises they make.
This app does not record any audio.
Keywords: audio, wave, oscilloscope, microphone, visualize, sound
- Visualización de señales externas por medio de la conexión USB de placas basadas ya sea en Arduino Nano o en PIC 18F2550.
- Utilización del microfono del dispositivo como fuente de señal.
- Transformada de Fourier para visualización del espectro en frecuencia.
Esta aplicación forma parte del Proyecto Integrador de la carrera Ingeniería Electronica de la Facultad de Ciencias Exacta, Fisicas y Naturales de la Universidad Nacional de Cordoba.
Código de fuente del proyecto (Android, Arduino y PIC)
You may not realise it but you are holding in your hand the latest innovation that will enable you to harness the processing power which you already have in your pocket - and use it for debugging and analysis on the move.
- Connect seamlessly via Bluetooth to any smart device
- Email data in real time for fast turn-around and further analysis
- Multiple data analysis and logging options: oscilloscope mode plus CAN, I2C, SPI, RS232, RS485, 8-bit bus, DVM ...and many more!
- Signal generator functionality
- Digital outputs to control electronics, LEDs, ...
Currently available: Basic oscilloscope mode and CAN bus analysis. Other modes under development.
NOTE: THIS APP REQUIRES THE HITEX CANDROID INTERFACE! Without this, you can use the App in "Demo mode" by running it and clicking on "Demo" which will show you some example screenshots.
++ First batch of CANdroid hardware already sold out, more coming soon! For details of the Hitex CANdroid hardware and to get priority on the next batch of interfaces, please go to www.candroid.co.uk or email us on firstname.lastname@example.org.
Follow us on Twitter for updates: @CANdroid
** Support/discussion forums coming soon! **
*** OUTPUT ***
Visualization is done on real like device that shows:
- Audio level
- Noise Level
- Current frequency
- Frequency oscilloscope
- Time to Frequency chart
*** ACCURACY ***
Application is calibrated with real tone generator. Internal microphone limit is around 1800 Hz, but under this frequency accuracy is very respectable +/- 0.5 Hz.
*** NOISE LIMIT ***
You can easily set a limit that removes noise treshold with included trackbar.
*** EXPORT ***
You can export TTF chart to comma-separated file that you can later analyze with MS Excel or other table processor. Application has file directory browser with Save and Overwrite feature.
Please don't hesitate to write us for details or questions: email@example.com
Use it if you are developing an app that uses sensors, to measure your environment, to learn about the physical phenomena that these sensors measure, or simply if you are curious.
Supported sensors are:
- Uncalibrated Magnetic
- Orientation (*)
- Gravity (*)
- Linear acceleration (*)
- Rotation vector (*)
- Game Rotation vector (*)
- Geomagnetic Rotation vector (*)
- Bluetooth signal strength
- Wi-Fi signal strength
- Step Counter
- Step Detector
- Significant motion
- Relative humidity
- Ambient temperature
When it makes sense, you can plot the X, Y, and Z component, and the magnitude. For Wi-Fi and Bluetooth you can plot the strongest signal, or a chosen network.
Not all Android devices have all sensors, and some even have `fake' sensors that always return zero. The sensors indicated with (*) are `virtual', `synthetic' or `fused' sensors that combine or process data from other sensors.
More from developer
!THE DEVELOPERS ARE IN NO WAY AFFILIATED WITH DIGITEC AG SWITZERLAND!
This app is in development, hence the name BETA. Please send us a bugreport if you find a problem with the app.
There are no advertisements yet, which may change in the future.
-> Search and find products and see price, details, picture, etc.
Features NOT IMPLEMENTED
-> You CANNOT read/write comments
-> You CANNOT order or log in
-> You CANNOT see the current daily discounted product
-> You CANNOT browse products
If you like it, please don't hesitate to rate this app.
It enables you to monitor your Baby's room using your mobile phone. Download the Bluetooth Baby Monitor on two Android phones and place one in your Baby's room and the other one in your bedroom.
» No Network Connection needed
» No SIM needed (less power required, no additional costs)
» No WLAN needed for transmission (less power required)
» Voice activation
» Two initial Layout Themes
» Use anytime, anywhere
» See the battery level of the phone in the Baby's room
Download the app to have the Nap-Version running 30 minutes. You can upgrade to the unrestricted version inside the application.
The range of Bluetooth varies based on your environment and your device. Therefore, the app also displays the connection quality.
Features planed for the next version:
» Push to listen.
» Option: Alarm when Battery is low
Features planed for the future:
» Wifi/WLAN Support
» Record & Push to play lullaby
Exclusive For Android!
Important Note: By purchasing this application from here, you are supporting the Open Source project (hardware and software), and enable us to constantly keep the application up to date. Also you will always get the most recent updates from us directly. You can download the source code and the application at http://www.osciprime.com under GPL.
This is a fully functional Android Oscilloscope. It works with the standard microphone audio input as well as with our USB Oscilloscope. It replaces our legacy version of the "OsciPrime Oscilloscope".
*Best Experience on Tablets or devices with large Screens*
-> Powerful multi-touch functionality in an oscilloscope like never seen before
-> All basic oscilloscope functionality (Trigger, Interleave, Measurement, Attenuation, Offset, etc.)
-> Hardware Ready: With our OsciPrime Oscilloscope hardware, you can measure real voltage sources => http://www.osciprime.com
-> Customization: Measuring in dark environments? Set up your workspace theme-colors as you like to fit your requirements.
-> Export Screenshots to PNG for further use
-> 44100 kHz Mic input Mono
-> USB Oscilloscope 2x 8 bit 6 [Msps/s]
-> http://www.osciprime.com for more Info about USB scope specs
Currently working on:
-> Testing and improving Hardware
-> Adding Logging Support for the Android Application
-> Tinkering for an Ubuntu Version of the SW
Information regarding USB Oscilloscope Hardware:
We are currently developing a new hardware board, which we will make available for ordering under http://www.osciprime.com.
Refunds: You are not happy with our Oscilloscope, or your device does not support feature XY? No problem, we are refunding you even after the standard refund window! Just get in touch with us and we will try our best to resolve the issue or refund you.
Release 19 November 2013
+ Improved Graphics performance by removing unnecessary layer
+ Font size refined to scale better with displays
+ Fixed misbehaving lower bar on 4.4 (Nexus 5)
Release 22 November 2012
+ Calibration Offset is now calculated as float (fixes bug with OsciPrime hardware)
Release 31 October 2012
+ Fixed Nullpointer in Audio Source
+ Added Buffer Preview and Window
+ USB OsciPrime: Uses double the amount of Y-Space now
+ Added xxhdpi graphics
Release 19 October 2012
+ Added debugging Option for manually setting params on the hardware
+ Fixed issue with triggering on falling edge
+ Improved trigger results for low frequencies
+ Fixed notification issue
Release 23 August 2012
+ Temporarily disabled attenuation changed when source not running
+ Added a new offset parameter for every attenuation setting
+ Added option to fetch calibration of the USB scope from our webserver
+ Fixed a bug with the network sink where it would hang until client connects
+ Added option for fullscreen mode (experimental)
+ Added option to stop data acquisition when exiting the application
+ Changed the color palette
+ Changed app name to "OsciPrime" only
Release 27 Jul 2012
+ Redone calibration implementation
+ Handles are now more flexible and easier to add
+ Added Holo Dark Style Checkboxes
+ Added Network Sink and Source (experimental)
+ Added Clipping indication (see settings)
+ Fixed default zoom level for other resolutions
+ Added Button to activate probe compensation for USB
+ Externalized some Strings
Using Bluetooth your phone can be used to scroll on your Desktop/Laptop.
Head over to our technical blog for instructions and the source code for the Linux side.
The source code demonstrates how to use Bluetooth and the Linux uinput system to emulate mouse movement or key presses.
*This tool only works with Linux (tested on Ubuntu)*
*The tool is open source (GPL) and you are required to compile the Linux source code*
Thanks for your support :)