It just might succeed where other apps have failed.
Currently 15-10-2014, according to the success vs unsuccess reports our success rate is 64% out of total reports.
Having a Wi-Fi problem ?
Your Wi-Fi stopped working or seems broken?
If you are about to do a factory reset - try this application first, it might heal your device!
NO PROMISES MADE, NO GUARANTIES, but it has been tested on some devices with a malfunctioned WiFi which otherwise required factory reset and fixed the problem.
IT WILL DELETE ALL YOUR WI-FI PASSWORDS!
Here is the current list of devices which success reports were sent on:
HTC Desire / HD / Evo / G1 / Glacier / Hero / Magic / Legend / G2 / One
Motorola Droid / Milestone
Samsung GT-i5510 / GT-i5700 / GT-5800 / GT-i9000 / GTi9000M / GT-P1000 / SPH-M900 / SGH-i896 / SGH-i897 / SGH-T959 / SHW-M110S / SHW-M130 / SPH-D700 / SPH-M900 / SPH-M910 / SPH-M920 / S / S2 / S3
Sony Ericsson E15i / X10i
Unlike other Wi-Fi fix applications it does not run as a service on the backround, it does not add any cpu load, it does not consume your battery.
Just one click - activate it, let it do its magic, wait for a few seconds (up to about one minute) and thats it!
Please note - if your hardware is broken there isn't any software which can fix that. This app solves problems in Android OS which cause the Wi-Fi to stop working properly.
It is recommended installing this app now that your Wi-Fi does work so it will be available if Wi-Fi stopped working and your 3G is expensive.
Fixing wifi is just the first phase - in the near future we plan to add GPS and bluetooth fixing.
Be aware that the return window is 15 minutes.
For support, visit http://wififixer.wordpress.com or email the developer using the link below.
Thank you for your donation!
***IMPORTANT!!!**** The current Wifi Fixer release is not showing in the market for Android 4.3. If you are on Android 4.3 and want want to download Wifi Fixer, please join the beta program:
Help us with the translation project on http://crowdin.net/project/wifi-connection-manager
NOTE: According to the change of Google Play Mobile Ads policy, devices before Android 2.3 are no longer be supported.
Legacy devices can download the app from: http://www.roamingsoft.com/android/WifiManagerLegacy.apk
1. Support AP (Access Points) SSID with special characters, such as Chinese, Japanese, Korean, Greeks, Russian, Arabic, Portuguese, UNICODE and so on.
2. Display saved network password. (require device to be rooted)
3. Fix device Wi-Fi problems.
4. Instant connect. Once searched, once start connecting. Way faster than the system build-in Wi-Fi scanner.
5. Static IP settings support. Auto switch between different AP.
6. Switch between available networks, solving the network conflict problem.
7. Add/Connect to certain hidden SSID network (depends on device and network conditions).
8. Manual add network, with special support for EAP/LEAP encrypted network.
9. Pause scan, convenient to browse many results.
10. More detail network information, network bandwidth, channel and network type.
11. Auto detect Web Authentication.
12. Backup/Restore saved networks.
13. Add/Share Wi-Fi network with QR code.
14. Arrange network connecting priority.
15. WPS (Wi-Fi Protected Setup) support for Android 4.0 or above devices.
16. Automatical switch between saved networks when signal is not ideal.
17. Wi-Fi tether (Wi-Fi Hotspot) support.
About the required permissions:
Camera is for adding Wi-Fi network via QR code.
Phone and Internet is for the AdMob plug-in made by Google.
Storage is for backup and restore saved network.
Here is the App for you!!
1Tap WiFi Repair: The best WiFi Tool in Android.
This is Lite version with Ads, Please try 1Tap WiFi Repair Pro to show support for development.(Home Screen Widget + No Ads in Pro version)
NOTE: Basically repairing is achieved by refreshing the WiFi connection. Android system is forced to reset the WiFi which solves most of the common issues with WiFi.
★ 1Tap to repair all the common issues with WiFi.
★ Home Screen Repair Widget (Pro Feature)
★ Good WiFi signal strength through intelligent signal resetting.
★ Experience good signal.
★ Android system automatically sets the best WiFi available.
★ Resolves IP conflict between two WiFi through refreshing WiFi.
★ Auto Close after Refreshing network.
★ Notify last Refresh time.
The ultimate solution to all your WiFi issues, This App runs innovative code to resolve any IP conflicts between WiFi and resets the best WiFi in the area, Optimizes the WiFi strength in less than a minute.
** You need to have connected to the network in the past.
** This app cannot "hack" into an unknown/new network.
I cannot help you with getting root. Have a look at http://forum.xda-developers.com for that.
Have you ever forgotten the password of your home WiFi network, or the one you setup for your parents a few months back?
This application will help you recover the password of a wireless network you have connected to with your device in the past.
You can then either tap on an entry to copy it, or export the list to SD, or share it using the standard Android sharing facilities.
It does not crack the network, or use the MAC/SSID address to deduce the password. It simply reads it from the device itself.
Essentially it parses the wpa_supplicant file.
For more information on how the keys are recovered read here: http://alt236.blogspot.com/2011/04/android-wifi-password-locations.html
Please use responsibly.
Tested by me on:
•HTC Desire Z
•Samsung Galaxy Tab.
According to feedback it also works on:
•HTC Desire HD
•LG Optimus 2X
•Xperia X10 Mini
Email me if does not work on your device and I'll try to fix it.
Please email me with any bugs/problems/feature requests. I cannot reply to market comments which can make debugging difficult.
WiFinspect is a multi-tool intended for Computer Security professionals and other advanced users that wish to monitor the networks they own or have permission, i.e. the app is a security audit tool and not a hacking tool. The functions include:
* Network Information
* UPnP Device Scanner
* Host Discovery
* Network Sniffer
* Pcap Analyzer (three options)
* PCI DSS Menu
- Access Point Default Password Test (requirement 2.1.1.c)
- Access Point Security Test (requirement 4.1.1)
- Access Point Scanner (requirement 11.1)
- Internal Network Vulnerability Scanner (requirement 11.2.1)
- External Network Vulnerability Scanner (preparation for requirement 11.2.2)
* Host Information
* Port Scan
* Host Vulnerability Scan
This app is a student dissertation by Andreas Hadjittofis as part of his MSc in Computer Security at the University of Birmingham. The project is supervised by Dr Tom Chothia. The developers of this app cannot be held responsible for how this app is being used. The app comes with no guarantees.
* Based on your reports, Nmap WILL NOT WORK on devices running Android 2.1 and 2.2. You will get the "Some binaries could not be installed" error message and will be presented with the non-root mode. If you are using a newer Android version, please email me.
* Network Information (ROOT): Information about the connected network like MAC and IP addresses, gateway etc
* UPnP Device Scanner: Lists all UPnP devices on the network that are within the view of your device
* Host discovery (ROOT): Uses nmap to discover all devices on the network that are within the view of your device
* Network Sniffer (ROOT): Uses tcpdump to sniff on all packets that are within the view of your device. The resulting pcap files can be analyzed with Wireshark or the built-in Pcap Analyzer
* Pcap Analyzer: Uses jNetPcap to parse a pcap file. Three options: Packet Distribution, Bandwidth Distribution or Communicating Hosts analysis
* Access Point Default Password Test: Checks a pre-set list of default router passwords against your router’s control panel and notifies you if your router is using a default password
* Access Point Security Test: Displays the access points that are within the view of your device with a note whether they are secure (WPA/WPA2) or not (WEP or unlocked)
* Access Point Scanner: Displays the access points that are within the view of your device
* Internal Vulnerability Scanner (ROOT): Uses nmap to find all devices on the network that are within the view of your device. A note is given whether exploits exists for a given device based on its operating system and open ports
* External Vulnerability Scanner (ROOT): Runs Host Information, Port Scan, Host Vulnerability Scan, Traceroute, Ping or Sniffer functions on a given IP address or hostname
* Host Information (ROOT): Uses nmap to retrieve the device’s hostname, MAC address, vendor, operating system, device name and workgroup
* Port Scan (ROOT): Uses nmap to retrieve the device’s open ports. Click on a port to view the Metasploit results for the device's operating system and port
* Host Vulnerability Scanner (ROOT): Uses nmap to retrieve information about the host along with a note stating whether exploits exists for the device based on its operating system and open ports
* Traceroute (ROOT): Uses nmap to traceroute to a host
* Ping (ROOT): Uses nping to ping a host
* ACCESS_WIFI_STATE, CHANGE_WIFI_STATE, ACCESS_NETWORK_STATE: Used to determine if the device is connected to a Wi-Fi network and to retrieve the data displayed in Network Information function
* CHANGE_WIFI_MULTICAST_STATE: Used by the UPnP Device Scanner function
* INTERNET: Used to retrieve the device’s external IP address in Network Information function, for Metasploit search, and for the optional error reporting.
* WRITE_EXTERNAL_STORAGE: Used to store the nmap and pcap files
Shows the Wi-Fi channels around you. Helps you to find a less crowded channel for your wireless router.
For the USB read/write permission: This permission is used to save and load snapshots(see menu in my app).
1. Signal strengh
2. Channel number
3. Security type
4. Link speed
5. Hardware vendor
6. IP number, and etc.
You can see which one is good and bad intuitively, and it is very easy to use.
Also, this application provides "Query nearby network devices" feature.
It scans all connected devices to your AP.
WiFi Picker also supports notification feature with various network information.
(Link speed, IP etc)
Retailers, crooks, the government, and others shady individuals are tracking your movements. Even when your Wi-Fi is turned off, your phone may be broadcasting information to whomever is in range which can be used both to track repeated visits to as well as your exact movements in an area under surveillance.
It's not a big step to couple this to personal information - a retailer for example, could track your trip to the register and correlate with your payment information. Now the tracking hardware and software vendors, the store (or chain) owner, their business partners, they can now all track where you are every time you come into range of one of their systems, and fully profile who you are, what you do, your financials, and your daily patterns!
That is just one example, but there are many uses for tracking you. Make no mistake, this is happening in the real world today.
One solution is shutting off Wi-Fi completely (including the background network scanning, a setting most people don't know about), but you would lose benefits like automatically connecting to known Wi-Fi networks and improved location awareness for your apps. It also does nothing to help the situation for others.
Pry-Fi will prevent your device from announcing all the networks it knows to the outside world, but it will still allow background scanning and automatically connecting to Wi-Fi networks. While you are not connected to a Wi-Fi network, the MAC address will constantly be pseudo-randomized, following a pattern that still makes the trackers think you are a real person, but they will not encounter your MAC address again. This will slowly poison their tracking database with useless information.
When you do connect to a Wi-Fi network, unless you specify otherwise, your MAC address will also be randomized - the same MAC address will not be used the next time you connect to this or any other network.
Though of course the companies involved with these trackers claim they wouldn't use the data maliciously, the possibility is there, and we all know that if something can be abused, ultimately it will be. There do not appear to be any laws against these practices yet, nor is it likely Wi-Fi will be redesigned any time soon to get rid of the information leaks.
But we can make an effort to reduce the usefulness of the tracking data for the exploiters. Pry-Fi comes with a War mode, which when enabled tries to make your Android device appear like dozens of people. Just wandering around an area under Wi-Fi location surveillance for a few minutes can ruin the tracking data for the period of your stay.
Proof of Concept
This is proof-of-concept code, and how for it will go in the future depends on interest and how well it works. It has been tested on several devices and seems to work, but it is very young still. The magic the app does to achieve its purpose is ever subject to changing Android security policies and OEM customizations, so even though it works now, there really is no saying if it will still be possible in future firmwares.
Of course you should also keep in mind that tracking can be done in many ways, and these W-Fi signals are far from the only method in use.
Further details, device compatibility information, FAQ, discussion, etc is all available on XDA-Developers.com here:
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
• Voted #1 TOP ROOT APP on Twitter.
• New DEMO VIDEO: http://youtube.com/watch?v=YU33zabluSY&hd=1
• No icon! Requires the Titanium Backup (free) app (see "More" section below). This key will turn it into PRO.
• The same key can be used on several devices!
• For download issues & support: read below.
PRO Features Added:
[✔] Multiple backups per app
[✔] 0-click batch restore
[✔] Backup/restore SMS,MMS,calls,bookmarks,Wi-Fi AP as XML
[✔] Multi-user support for some apps! (eg: games)
[✔] Batch verification
[✔] Backup apps without closing them!
[✔] Create your own update.zip containing apps+data!
[✔] Restore individual apps+data from non-root ADB backups!
[✔] Restore individual apps+data from CWM backups!
[✔] Restore individual apps+data from TWRP backups!
[✔] Hypershell speed
[✔] Migrate system data across different ROMs
[✔] Market Doctor (relink apps to Market)
[✔] "Destroy all Market links" feature
[✔] Apps freezer (incl. batch support)
[✔] Market "auto updating" manager
[✔] Convert user apps <=> system apps
[✔] Unlimited schedules
[✔] Sync to/from Dropbox (manual/scheduled)
[✔] Sync to/from Box (manual/scheduled)
[✔] Sync to/from Google Drive (manual/scheduled)
[✔] TB Web Server: download/upload your backups as a single ZIP on your computer
[✔] Load/Save a Filter and use it in Widgets/Schedules
[✔] Change the device's Android ID, restore it from a backup or after a factory reset
[✔] Protect backup against deletion
[✔] Send backup (to e-mail/cloud) and import it in 1 click
[✔] Backup→Verify→Un-install an app in one shot
[✔] Freeze/defrost/launch apps in a single click
[✔] CSV export any app DB (e-mail or Google Docs)
[✔] Brand the app with your name
[✔] Bloatware Melter (experimental)
[✔] Convert app data to/from faster WAL DB format
[✔] And more!
[✔] Dalvik cache cleaner
[✔] Integrate system app updates into ROM
[✔] Move apps into ROM
[✔] Integrate Dalvik cache system elements into ROM
What the Press says:
"The Most Essential App For Android" - Tech'n'Life
"NONE can compare with this one" - Android Market Review
"The Best Backup App for Android" - Lifehacker
"The hands down best Backup on the market" - Absolutely Android
"It is a must-have backup app" - Droid Ninja
Support & Upgrades:
• All upgrades are FREE.
• If Market won't download your PRO key: although credit card authorization *usually* occurs instantly, in rare cases it may need up to a few hours to complete. Try the Web version of Play Store. If problem persists, login at checkout.google.com to cancel your order & try again.
• If your PRO key doesn't work (eg: installed before the purchase completed) please un-install it and then reinstall it from the Web version of Play Store.
• We aren't responsible for any currency conversion fees charged by credit card issuers.
• For support please see the Knowledge Base at http://titaniumtrack.com/kb and then e-mail us at the address below.
Here's the older TB Pro demo video:
Thank you for supporting our work!
MONEY BACK GUARANTEE
ROOT IS REQUIRED
Root Cleaner is simple and effective application which a lot increases your peformance by cleaning your system. You can choose between quick cleaning and full cleaning. Quick cleaning cleans your memory, file cache, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Application also contains feature for uninstalling, clearing data and freezing or unfreezing your system and non-system applications.
-Restart system UI
-Clean drop caches
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clean dalvik cache
-Clean init.d folder
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clear app data
-Quick cleaning interval
-Exception list for files and folders
-English, Czech, Slovak, Russian, Italian
IF YOU FIND A BUG OR IF YOU HAVE SOME PROBLEM, CONTACT ME BY EMAIL PLEASE
No Root Screenshot It is an application that lets you take screenshots of your phone. This application works on ALL phones. Root is NOT required.
Take screenshots of any screen on your phone!
This application is for those users who need to take screenshots, but don't have root access to their phones.
PLEASE READ CAREFULLY BEFORE INSTALLING:
This application will instruct you to download and install a free desktop application on your Windows or Mac. Once installed, you must run the desktop application with your phone attached to your computer. This will enable screenshots on your phone.
Once you've done this, you can disconnect your phone and take screenshots whenever you want. However, every time you restart your phone, you'll have to connect it to your computer and run the desktop application again. If you restart your phone frequently, this app may not be for you, as it may prove to be too inconvenient.
Your phone will NOT be rooted or temp-rooted in any way. No system files on your phone will be altered.
If your phone is already rooted, please download the normal "Screenshot It" application from the Android market.
- Take a screenshot of your phone's screen
- Save as a jpg or png file and share anywhere
- Crop screenshots
- Annotate and draw on screenshots
- Screen shot status bar button
- Screenshot widget button
- Shake to screen shot
- Delayed screenshot timer
- "Share" menu integration
- Custom save directory
- Overlay phone information on screenshots
- Works on ALL devices
Please exclude this app from any task killer or anti-virus software on your phone. If you don't, you'll have to run the enabler more often.
Tags: Screenshot, screen shot, screen capture, no root
This application comes without warranty, only use it if you are 100% sure what you are doing!
Improper use can make the system unstable, so please inform yourself if you are unsure about a certain feature!
This app is open source
Device Control is an app to control several features of your device as well as some nice extra features like a Tasker, App Manager, Editors, Entropy Generator, Wireless Filemanager and more.
With Device Control you can tweak and edit:
[+] Device specific features like Knock-On, vibration strength, screen color temperature, LCD power reduce, ...
[+] CPU frequencies, governors, i/o schedulers, ...
[+] GPU frequencies, governors, ...
[+] Kernel specific extras like intelli-plug and intelli-thermal by faux, msm dcvs toggle, mpdecision toggle, power scheduling, power efficient workqueues ...
[+] Voltage Control, Fast Charge and more
Note: Features need to be supported by your device. Unsupported features are getting automatically hidden!
It also can monitor:
[+] Your cpu and battery temperature
[+] Time in state of your cpu
[+] Maximum, minimum and current frequency as well as the governor of your cpu (fully multicore aware and toggle able auto refreshing intervals)
Extra tools like:
[+] Tasker (automatic fstrimming, screen off and on actions ...)
[*] Example: You can configure it to automatically toggle your cpu's frequency to a very low value once your screen turns off, to save battery, and restore the value when you are using your phone again.
[+] Editors (vm, sysctl, build.prop, ...)
[+] Quick tweaks (vm, build.prop, ...)
[+] Wireless Filemanager, allows you to access your device's sdcard / internal storage via any webbrowser
[+] App Manager to view information about the app, kill it, view them on Google Play Store, disable / reenable your apps to prevent them from running and hiding them from launcher
Device Control can automatically restore your settings on boot (sections to restore need to be checked in preferences)
Device Control is 100% ad free and will always be.
No need to spend money, you get every feature without paying or donating.
Device Control is in active development, if you like to contribute to the development or just buy me a beer, you can donate via in app purchases!
Donations are not required but highly appreciated!
Explanation of permissions:
ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: To read your ip address to display it at the Wireless Filemanager
ACCESS_SUPERUSER: Device Control requires root to function properly.
BILLING: For the optional in app donations.
INTERNET: Required for our built-in error reporting service to submit bug reports.
READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE: Needed for the Wireless Filemanager
READ_PHONE_STATE: For better detection of your device.
RECEIVE_BOOT_COMPLETED: To restore your tweaks on boot up of the device.
VIBRATE: To test the vibration strength.
GET_PACKAGE_SIZE: To display size statistics at the app manager
GET_TASKS: To allow to detect running apps and kill them via the app manager
REBOOT, DEVICE_POWER: Used by the flasher to reboot the device without super user permissions on NamelessRom
"Simple File Finder" is a simple and easy-to-use, yet feature-packed tool that lets you search files on your android device. A must-have-app for every Android!
Lost files on your Android device? Don't remember the file name?? No worries! "Simple File Finder" is here to help you!!
Find files with some part of the file name or even use wild-cards ( '?' for exact one character, '*' for zero or more characters)
Use any possible combination of options like File Name, Wild-card Pattern, File Type, File Size, Last Modified Date.
(TIP: If you don't remember any part of the file name use '*' as your search string and enter other fields like File Type, File Size, Last Modified Date.)
Once the files are found, you can do much more than just opening a file!! For example, Share a file, Delete it or even Share multiple files in one go! On the top of it we've added a feature that lets you add multiple files to a ZIP and send it... say as a mail attachment or via bluetooth or anything else you want!
And yes, don't forget to try the home screen widget! (If you are not able to see the widget, make sure the App is installed on Phone Memory and then reboot your phone.)
Best Part? IT'S FREE! And will be supported for FREE! More to come!!
If you are not able to connect to your WiFi because of "Avoided poor Internet Connection" message, just use this App and you should be able to connect with just one click, WITHOUT having to reboot! It takes just seconds to do it!!
Fed up of "Avoided poor Internet Connection" error on your Android? "WiFi Connection Fixer" is your solution!
Not just that it might fix few other WiFi problems as well, we're not sure but give it a shot!
This app needs ROOT (SuperUser) access to work.
In many ROMs including CyanogenMod / AOKP / Other Custom ROMs many times you get "Avoided poor Internet Connection" message while trying to connect to your WiFi even when the signal is good. This app will help you connect in such situations.
If it worked for you, RATE FIVE STARS! :)
Email Feedback at: firstname.lastname@example.org
THANKS for your support in downloading the donate version!
(Declaimer: ROOT App - Use wisely. We're not responsible for ANY damage caused!)