Voltage Control Extreme available!
CPU tweaking made easy and simple.
Increased battery life and higher device performance.
Easy and intuitive overclocking and undervolting.
This application allows you to control advanced features of overclocking kernels, you can change the voltage applied and select frequencies you want to use.
Voltage Control Extreme (developer name sulph8), features include:
- Support more than one profile
- CPU history display
- overvolting support (+50mV and 1500mV limit)
- undervolting up to -250mV (lite version limited to -200mV)
Devices supported (with proper kernels!):
Galaxy S3 (GT-i9300)
Galaxy S2 (GT-i9100)
Infuse 4G (SGH-i997)
Galaxy S (GT-i9000(m))
Epic 4G (SGH-D700)
Galaxy Tab (P1000)
and many, many more!
Supported features may vary on depending on model and kernel.
Voltage Control works with Eclair, Froyo and Gingerbread, Honeycomb, ICS, JB ROMs, no matter if STOCK or CM7/CM9/AOKP/MIUI.
This is a lite version.
- CPU overclock / underclock
- set CPU governor
- changing of I/O Scheduler
- selection of maximum OC frequency
- selection if minimum frequency
- enabling/disabling of particular frequencies (on supported kernels!)
- changing voltage per frequency
- You can create up to two switchable profiles
- Widget with profile switcher and app launcher (passive)
- it can create CWM flashable boot settings remover, to save the day.
After you install the key Extreme features will be unlocked.
Consider it rather *donate version* because these features are NOT GUARANTEED TO WORK.
USE THIS APPLICATION ON YOUR OWN RISK
I recommend app nitrality, which I develop with insanity ROM maker nitr8!
Similar CPU speed setting apps: SetCPU, OverclockWidget, PimpMyCPU, CPU Tuner, Milestone Overclock, CPU Master, No-frills CPU Control
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
This app requires ROOT permissions.
If you don't know what root permissions are, you probably don't need this app.
No-frills CPU Control is a tool you can use on your rooted  device to quickly set the CPU frequencies and governor to use.
It allows you to use the highest frequency your phone supports and gain some precious FPS in your preferred game, or go down to the lowest frequency and gain some more juice when your phone is sitting idle.
All of this without any memory footprint or services running in the background!
It has been reported working on a large number of rooted  devices from HTC, Samsung, Motorola, LG, Huawei, ZTE, Oppo and so on! Even Kindle and Nook Color!
Unfortunately, it does NOT work on Flytouch tablets, Zenithink zt180, HaiPad M7/Tabtech M7 or fake HTC/Samsung clones. Sorry about that, but you knew what you were buying when you did... didn't you?
Is your device supported? You need ROOT permissions and you'll probably need to be running a CUSTOM ROM (an example is the famous CyanogenMod) with kernel frequency scaling enabled. If you are unsure... just install the app and see for yourself!
If you need a custom ROM for your phone, the best places to find one are XDA [http://forum.xda-developers.com], MoDaCo [http://android.modaco.com/] or similar forums.
Be wary of the frequencies you select! Your phone may lock or become unresponsive if it doesn't like extreme values, but -hey- better safe than sorry: even though No-frills CPU Control allows you to choose if you want to apply the settings on boot, it comes with an extra "safety valve" too! If the device doesn't shut down (or reboot) in a clean way, it will not apply the settings, avoiding those nasty boot-loops you may have had with other overclocking apps. Please keep in mind that apps like QuickBoot are as quick as they are unsafe…
- Easy GUI to set frequencies, governor and i/o scheduler
- "safety valve" to avoid boot-loops in case of unsafe settings (more info in the homepage)
- Stats screen to see the effective usage of frequencies
No-frills CPU Control is open source under Apache 2.0 license. You can find the source code, more informations and you can ask for questions on its project post directly on XDA: http://forum.xda-developers.com/showthread.php?t=911917
SUPPORT: If you have any problems, before you write a negative comment, write an email or go to the homepage to get answers.
If I don't reply you or solve your problem, then go ahead and post a negative comment.
HINT: If you can't find the email of the developer, use the "Send CPU data" feature from the main screen, instead, and add your questions.
This app is FREE and will always be FREE.
Translations are ALWAYS welcome and are now as easy as getting a (free) account to http://www.getlocalization.com/noFrillsCPU/ and correcting what's wrong or filling what's missing. A HUGE "THANK YOU!" to all the people who helped translating this app! (jdb78, kallt_kaffe, David Kejzlar, Ryunosuke Tanaka, Charlie Cheung, dxdiag32, Corentin Garcia, Carlos Camacho, dancer_69, TorbenKB, Chris, FollowWings, Spaar, prescott66, Marco Bizarro, Cristian Silaghi, Cenk H. Uzunboy)
Starting with version 1.21 the app has a new look & feel matching the new Android 4.0 Ice Cream Sandwich and has dropped support for older Android releases (1.6 and 2.0). Don't worry! There's a new app, No-frills CPU Control CLASSIC which will always have the same features as the classic app with the old look & feel!
: if you don't know what a ROOTED device is, you can find a pretty good explanation here: [http://www.androidauthority.com/rooting-for-dummies-a-beginners-guide-to-root-your-android-phone-or-tablet-10915/]
AnTuTu CPU Master is a tool for changing the CPU/GPU speed on a rooted Android Mobile Phone/Pad.
CPU Master Automatic detection CPU's available frequencys, don't need to manually choose.
CPU Master's OverclockWidget show the CPU and battery stats, and change the CPU speed faster and simple.
CPU Master feature:
+ Speed up your processor
+ Powersave battery (speed down)
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
Please report any bugs before rating in the market. I am very aggressive with bug fixes. In your bug report please include the name of the KERNEL you are currently using.
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
This version is ad supported. It contains all the features of the Ad Free version. If you would like to support future development of this app, please consider purchasing the ad free version from the market. Alternatively, if you prefer, you can donate on the website (http://www.incredikernel.com). Please register and include your your username in the donation comments and I will give you access to a download page that contains the ad free version to download. There is no miniumum donation amount, you can donate as much or as little as you want and you will have access to the ad free version.
Its prime purpose is to be a battery saver and to save as much battery as possible, but it can be used to overclock at the same time (if the kernel of your device supports it).
Depending on triggers (based on the battery) different profiles are loaded. Each trigger has different profiles depending of the the state of your phone (if it is locked, on battery, on power or a phone call is being done).
A profile can modify the following:
* The CPU governor, its thresholds and min/max frequencies off your CPU (i.e. setCPU speed).
* The state of services like:
- mobiledata connection
- 3G/2G switch
- background sync
- airplane mode
Configurations (i.e. a set of trigger and profiles) can be loaded based on the time of the day and the day of the week. This allows you to set a different behaviour during the night or the weekend.
In praise of CyanogenMod... ;)
If you use and like this app please subscribe to the mailing list email@example.com and participate in the forums on https://sourceforge.net/projects/cputuner/ (Project webpage).
You can follow CPU tuner on: https://plus.google.com/109797451979104819882
If you want to help translating please join in at http://www.getlocalization.com/cputuner/.
Please report errors in a mail to the address listed below not in a market comment.
You best generate a capabilities report first, by going to settings then to backend and choose capabilities report, when it is done hit send (and save the mail as draft). Then describe your issue (and if possible attach a logcat output along with the zip file from the report).
A note on permissions: Yes there are a lot and potentially dangerous permissions needed, but cpu tuner does not request the network communication permission which means that cpu tuner cannot send any information back. Further more cpu tuner is opensource so you can browse the code and check....
- SoC (System On Chip) name, architecture, clock speed for each core ;
- System information : device brand & model, screen resolution, RAM, storage.;
- Battery information : level, status, temperature, capacity ;
- Android 2.2 and above (version 1.03 and +)
- INTERNET permission is required for the online validation (see notes below for more détails about the validation process)
Online Validation (version 1.04 and +)
The validation allows to store the hardware specification of your Android device in a database. After the validation, the program opens your validation URL into your current internet browser. If you enter your e-mail address (optional), an e-mail with your validation link will be sent to you as a reminder.
Settings screen and debug (version 1.03 and +)
If CPU-Z closes abnormally (in case of bug), the settings screen will appear at the next run. You can use that screen to remove the main detection features of the application, and make it run.
In case of bug, please open the application menu and choose "Send Debug Infos" to send a report by email
FAQ and troubleshooting
You can visit the FAQ at that address : http://www.cpuid.com/softwares/cpu-z-android.html#faq
Kernel Tuner offers complete customization of your device. Root is required
Custom kernel is required. Most of the features will only work on custom kernels. Check with your kernel developer to see if feature is supported
List of Features:
Full CPU control
GPU Control (changing freq and governor)
Changing buttons backlight
Quickly toggle individual cores online/offline
Restoring settings on boot
SD read ahead cache size
Full quad core support
CPU Times in State*
Full MP-Decision control*
Full thermald control*
Enable OTG with standard USB cable*
ADB over WiFi
Analise SD Card and display Biggest files
Swap - deprecated, will no longer improve this functionality*
Detailed System Info(CPU, Sensors, Memory, Battery...)
If you have any problem or suggestion feel free to contact me, or write on official thread on XDA Developers
Google Plus: https://plus.google.com/u/0/b/115273553144904124119/
Android Overclock makes your device blazing fast and can save your battery life! It also allows you to set custom profiles so you have full control over your devices performance. Control cpu with profiles for charging, time, temperature, battery, screen on/off and more! What sets Android Overclock apart from other similar apps is that it has all the functionality of these apps plus more features. It also looks extremely sexy!
This app requires root permission. For fast and friendly support please email us at JRummy16@gmail.com. We will be glad to help answer your questions and troubleshoot with you.
☆ Change cpu scaling settings (i.e. setcpu)
☆ Set cpu profiles with Screen off, battery percentage, temperature, screen on, charging usb, charging ac, changing/full.
☆ Gorgeous widgets with battery temp & cpu info
☆ increase speeds (overclock) or save battery life (underclock)
☆ Select scaling frequencies on the fly for supported phones
☆ Full overclock customization (set freq. and @ boot)
☆ Sexy and customizable UI
☆ Temperature notification options
☆ Voltage calculator
☆ Advanced settings (sysctl config, sampling rate, up threshold, other kernel tweaks)
** Extras for all devices: **
☆ Froyo apps2sd
☆ Ad blocker
☆ Free memory
☆ Build Property edits
☆ clear cache
☆ reboot, hot reboot, recovery, power-down
☆ lcd density, wifi scan interval, other build.props
and more +++
Devices listed below can use an overclocking module to overclock from within the app. Other devices can flash custom kernels to overclock. ( Droid X, Droid 2, Original Droid, Milestone, Milestone2, Flipout, Galaxy Beam, Galaxy A, Archos A70 Tablet, Archos A101 Tablet).
Note: Original Droid users must have the stock 4 slot kernel for the module to work. Support for more kernels may come later.
Developed by: JRummy Apps Inc.
* FAQ at http://timos.me/tm/faq
* Set on boot, settings lost, frequencies don't stick, MIUI ROM problem,... read FAQ above
* We do not reply to Play Store rating as it only allow rather short message and no record for conversation, please email us for support
* Help us translate the app: http://timos.me/tm/translate
This app requires:
- ROOT and working busybox installation
These devices are officially supported
- GALAXY NEXUS (toro, maguro, toroplus)
- Nexus 7 (grouper) and Nexus 7 3G (tipalia)
- Nexus 7 2013 (flo)
- Nexus 4 (mako)
- Nexus 5 (hammerhead, preliminary support)
- Sony Xperia Z (yuga) and ZL (odin)
- LG Optimus G
- Galaxy SIII with Exynos SOC
- HTC Incredible S (vivo: preliminary support)
- Nexus 10 (preliminary support)
- HTC One X International (endeavoru; preliminary support)
- HTC One M7U and M7UL
- Galaxy SIII with Qualcomm SOC (preliminary support)
Coming to more devices in the future.
Trickster MOD app is a tweaking tool to change various settings included in your kernel and other mods to your phone.
* Trickster MOD has abilities to do the following *
- ADB over WLAN
- Set I/O scheduler, read ahead buffer, CPU scaling governor, min and max CPU speed
- CPU Statistics
- Set Device hostname
- Apply Grace Period (was Bootloop Preventer)
- Frequency Lock
* Donate key will get you following features *
- I/O scheduler advanced control
- Color profile for device with color settings
- CPU Frequency profile
- Voltage profile for some settings
- Sound control for faux's patches
- Advanced gamma control for N4 with faux's patch
- Touch Filter Control for N4 with supported kernels
- Bootloader lock/unlock without fastboot and data wipe for some devices
- Kernel backup/restore on some supported devices
- Launcher shortcuts to some app operations
* Following features depend on kernel support *
- Color for Galaxy Nexus and Nexus 4, contrast and gamma tweaks for Galaxy Nexus
- Generic hotplug
- CPU Temp limit
- Minimal SmartReflex voltage of Core, IVA, and MPU domains
- Nominal SmartReflex voltage for Core, IVA, and MPU domains
- Regulator voltages
- GLaDOS live OC of Core, GPU and MPU
- WIFI mode for screen off (power saving or full speed)
- Vibrator strength
- Headset volume boost
- High performance sound
- Force fast charge
- Battery live extender
- Touch wake and touch wake duration
- fsync control
- Sweep 2 wake
- And more...
This is provided with NO GUARANTY whatsoever. Use your common sense.
This free app is AD FREE.
Three modes: Screen On/Screen Off/Charge Mode
Support both phone and tablet, dual core devices support.
AWARE: NEED A ROOTED PHONE OR PAD! Support up to Honeycomb!
AWARE: Sorry, most current MTK base devices were not supported!
This app requires ROOT permissions.
If you don't know what root permissions are, you probably don't need this app.
No-frills CPU Control CLASSIC is a trimmed down version of the popular No-frills CPU Control. It is meant for older devices running Android 1.6 "Donut" or Android 2.0 "Eclair" or for people who want an app as small as possible: just around 400KB!
All the features of the standard No-frills CPU Control are available in the CLASSIC version. The only difference is in the user interface ("the looks").
For further information, check the standard app.
Now requests write external storage permission becuase of updated ad sdk. It is needed by the ad sdk to play video ads which I DO NOT use but it had to be added so I could update my ad provider. I made the banner ads smaller for higher resolution devices in this update to try to make them less intrusive for the user.
If it doesn't hold the speeds you set it at double check to make sure you have installed an overclockable kernel.
MAY NOT BE COMPATIBLE WITH ALL DEVICES YET.
CPU Boost Lite is a cpu settings app. You can set cpu speeds and governor. There are different profiles to use and also a widget that displays the current overclock settings.
*Nitrous button widget(I don't always run my phone at the max speed that it can handle but occasionally I need that extra speed burst for an intensive app. The nitrous button widget allows you to set that higher max speed and then just one push of the nitrous button widget from your home screen gives you that extra speed when you need it. Push the button again to go back to your regular max speed. All without needing to open the app.)
*Battery Temp Profile
*Battery Level Profile
*Screen on/off Profile
*Set at boot option(Please test speed settings before setting at boot or phone may not reboot)
**Thanks to all who have reported back and done testing on multiple devices**
*If you have time to report what devices and roms you have tried with success or failure please send me an email. Thanks*
*Questions and suggestions always welcome*
tags: cpu overclock setcpu underclock root init2winit
StabilityTest is a CPU, GPU, RAM/memory stress-testing tool for your device, whether stock and unrooted (limited functionality) or rooted and overclocked with SetCPU, SetVsel or similar tools.
It also comes with per core or combined native linpackc MFLOPS calculation to measure your raw cpu performance.
The cpu worker performs mathematical calculations ("prime crunching") in native code and verifies the results, while the ram worker does heavy c memcpy operations in native code in a different thread.
- Classic StabilityTest for unrooted devices (sufficient to check your device's stability)
- Scaling StabilityTest for rooted devices (useful to test undervolting, overclocking and underclocking settings)
- CPU + GPU StabilityTest for unrooted devices (test both the stability & accuracy of your SoC's CPU and GPU)
- Native MFLOPS estimation (linpack / linpackc) either per core or combined
- Background Mode (StabilityTest can now run in background and with the screen turned off, except for the CPU/GPU mode)
- Dual & Quadcore support
Note that the CPU + GPU test tends to be less accurate for CPU related instabilities because part of the cpu power is eaten by opengl and thus cannot be verified.
Immediately reports errors and saves a log if the device crashes.
If you want to overclock your device test your settings with this tool!
If you want a rough estimation of your raw, native CPU power, try the built-in MFLOPS benchmark (either per core or combined).
Overclock can be harm to your hardware.
Use at your own risk.
Please read this description before installing.
This is a very sensitive program in regard to hardware and kernel. Not a common android app! So you have to check WHAT DEVICES are available.
Fully customed roms are suited own dev's taste.
It breaks the stock hardware driver rules, so this won't work on CM, MIUI, AOxP if they don't use the stock kernel.
Please try to understand what overclocking is before blaming me around here.... PLEASE!!!!
DO RESPECT EACH OTHER PLEASE.
Google app devs can't contact you via Play Store comments. If you have somthing to tell me or ask me, Please send me an email.
Galaxy S III, Galaxy Note II and Galaxy Note 10.1 with JellyBean are available now!
Check available models and use free version first before you buy.
What is this?
This is for family of Galaxy Note II(Exynos4412), Galaxy Note 10.1(Exynos4412), Galaxy S III(Exynos4412), Galaxy Note(Exynos4210), Galaxy Note LTE(MSM8660), Galaxy S II(Exynos4210), Galaxy S II LTE(MSM8660), Galaxy S(Hummingbird), Galaxy Player(Hummingbird), Galaxy Tab(7.0)(Hummingbird), Galaxy Tab 7.0+(Exynos4210) and Galaxy Tab 7.7(Exynos4210) devices.
You can set maximum CPU frequency of your device on available models EASILY.
This works with STOCK kernel, STOCK rom, many custom kernels and roms. (Not available on CM, MIUI and AOxP) You just need to do rooting.
Galaxy S III(Exynos4412) - Android 2.3/4.0/4.1
Galaxy S II(Exynos4210) - Android 2.3 / 4.0
Galaxy S II LTE(MSM8660) - Android 2.3 / 4.0
Galaxy Note(Exynos4210) - Android 2.3 / 4.0
Galaxy Note LTE(MSM8660) - Android 2.3 / 4.0
Galaxy Note II(Exynos4412) - Android 4.1
Galaxy Note 10.1(Exynos4412) - Android 4.1
Galaxy S(Hummingbird) - Android 2.2 / 2.3
Galaxy Player(Hummingbird) - Android 2.2 / 2.3
Galaxy Tab(7.0)(Hummingbird) - Android 2.3
Galaxy Tab 7.0+(Exynos4210) - Android 3.2
Galaxy Tab 7.7(Exynos4210) - Android 3.2
See details about available models at here.
Features on Ultimate
- profiles are stored in /sdcard/tegrak/overclock/*.oc
*Lock GPU clock to 267MHz (Galaxy S II/Galaxy Note/Galaxy Tab 7.0+)
*Set customized GPU clock. (Galaxy S II/Galaxy Note/Galaxy Tab 7.0+)
*Set customized GPU voltage. (Galaxy S II/Galaxy Note/Galaxy Tab 7.0+)
*Set scaling governor and min/max frequency.
*2x1 and 3x1 home screen widgets
*Set customized frequency (1.0 ~ 2.0 GHz)
*Set customized voltage (750 ~ 1400 mV, OV or UV available)
*Available set last settings on boot automatically.
- Stability checking background service is turned on about 5 minutes every time when you change settings.
- If your device freeze or shutdown while it is running, app will show you popup to apply the last setting on boot.
*Show ARM core voltage at max frequency.
*Show your device information
*Free from Advertisement
*Tweaks (Io Scheduler)
Features on Free
*Lock GPU clock to 267MHz (Galaxy S II/Galaxy Note)
*Set scaling governor and min/max frequency.
*Set cpu max frequency
- Galaxy S: 1.0 ~ 1.3GHz
- Galaxy S II: 1.2 ~ 1.452GHz
- Galaxy Note: 1.4 ~ 1.6GHz
- Galaxy Tab 7.0+: 1.4 ~ 1.6GHz
*Show ARM core voltage at max frequency.
*Show your device information
*Tweaks (Io Scheduler)
About voltage control
Galaxy S II/Galaxy Note Gingerbread: +-25 step
Galaxy S Froyo: +-25 step
Galaxy S Gingerbread: +-1 step
How to use?
First, click "Load overclock module.
Second, click "CPU max frequency" and choose one frequency from preset options.
You can control more detailed option in "Optimization" menu.
More features will be added :)
See details about available models at here.
If you are using Galaxy S or Galaxy Tab and your device is not in available models
please let me know your device's model number
Please set this option in your kernel config.
- Overclock 150%.
- More safe and more cheap than another app
- Need more time operation
- Effect of each device depending on the chip
Warning： Do not force close or delete app between install and 30 minutes ,It is writing into system .
We have appoozle support
Related words: CPU, battery , power , system ，GPU ，control , overclock
Client review (After translation) :
Compare the 30 kinds of the best accelerator, five stars. My quad-core 1.2Ghz phone after this software installed faster than 1.4Ghz fast, cheap and bowl, there is no risk of Brush Root
XT good use. Xperia TX new machines do not feel anything, but the more programs installed faster and slower to attend a lecture, then start overclocking feeling to come, very smooth.
for this is *** ROOT *** required !!
### if something doesnt work Please use the "SendDump" function of SystemCleanup and write me a short description ###
*best system / cache cleaner in market ;o) hold your system clean and free of bloatware. disable autostart / autorun of apps and services and ...
-Freeze/Remove Bloatware (it include a short description of common Apks)
-Move Userapps to /System/App to save Space
-Completely Odexfile aware (it shows the odex/dalvik file in detailview)
-Odex Apps directly On Phone to save Space on /data
-you'll get a notification if such an app is updated via Market
-cleanup App cache
-cleanup *dead* "/data/data//*.*" folder if apk is removed
-cleanup empty or duplicated Playlists
-cleanup dalvik-cache remove unused classes.dex files
-**automaticly checks for updated systemfiles wenn a package is updated (i.e. market) and shows a notify if a package exists in /system AND /data. (systemcleanup doesnt need to run in background! it register itself for 'package_replaced' intent ;o) **
-shows memoryusage of running apps
-search for unknown packagenanme with Google on a Single Click
-you can send me an updated/missing description for a System.apk per eMail ;o)
-in settings you can set the default installation location for packagemanager (auto,internal,sdcard)
-enable disable Activities and Services (i.E. disable the "Latitude" component of Maps if you dont need it)
-enable disable Autoruns
-Freeze items by PackageManager "disable component" or simply by rename with undescore
-added /system/vendor/app as systempath
-added /vendor/overlay/framework to cleanup paths
-backup/restore function for apk+data
-show apps installed on sdcard to manage autoruns
-added "Move app to Sdcard"
-restore only the apk or only the app data now
-negate the search with an "!" as first char
-send your backups to you google drive, dropbox, bluetooth, wifi direct or just via email.
-restore your backups i.e. directly from your google drive ;)
-added the MEDIA_BUTTON to autostarts menu (to prevent the wrong (media)app to start on headsetbutton)
-added App Descriptions for Samsung Galaxy S3
-added support for Alcatel Phones
update version 3.35:
update version 3.37:
-added support for android 4.2 "/data/app-lib"
update version 3.42:
-added "translate description" function
update version 3.44:
-added option to disable zipalign (do not enable this on lowend phones!)
update version 3.57:
-systemcleanup can now do automaticly/planned autocleanups. it listen for a
(this can be used i.e. in my tool smartQRTags)
update version 4.00:
-complete refactoring of internal root access lib (big speed improvment)
update version 4.10:
-it now fully support symlinks now
-you can move files directly from vendor to system without moving them to data first
-added /preload partintion
update version 4.12:
-haptic feedback on contextmenu only if enabled in systemsettings
update version 4.18:
-added "reinstall apk" to reinstall app if i.e. not working in /system/app
-added memory detailinfo on click memorybar
update version 4.24:
-added /flex/app as vendor location
update version 4.54:
-autostart of systemcleanup only if really needed
update version 4.71:
-support for 4.3/4.3
-you can search now for i.e. all system apps without libs "system -libs"
-it shows symlinks in the list with i.e. ">system"
-made the contextmenu less transparent
-added the option to explorer the selected Item with i.e SolidExplorer
Need ***ROOT*** AND maybe ***Custom Kernel***
newest Version switches reliable in the A2DP profile when music is played via Bluetooth. to prevent drop outs and stutter in the music playback!
set voltages on
1. Create one or more Profiles
2. Select one of these Profiles as Powersaving profile, witch is automaticly set if battery drops below the selected limit.
3. Pull down the notification bar click the SetXperia Icon and select a Profile ON-THE-FLY i.e. powersaving while browsing or Overclocking while gaming i.e. FPSE ;)
Overclocking Undervolting Tool for Sony Ericsson Neo.
Save Akku Power and set CPU Scaling to minimum while Screen is Off.
Set Profile on Low Battery
Set Profile on Screen Off
With setvsel you can set Vsel OnDemand or Performance
it include a stability test to ensure you settings are stable
Includes System Tweaks like:
-Set sdCard readahead KB ("/sys/devices/virtual/bdi/179:0/read_ahead_kb")
-Set VM Min Free Memory ("vm.min_free_kbytes")
-Remount Storage with NoAtime on Boot
-Systeminfo like cpuspy
-profiles like setCpu, NoFrills CPU Control
-voltages like IncrediControl
updated version 1.02:
-implemented "remount with noatime"
updated version 1.03:
-added systeminfo into menue
update version 1.08:
-option to save & restore settings to sdCard
update version 1.10:
-now shows all governors and all schedulers
-notification on "values not save" condition (when setxperia applies values at boot, it marks this vales "save" after 30sec. to prevent boot loops)
update version 1.18:
-new tool "moduleloader" can load kernelmodules like cifs.ko or usb-storage.ko on startup ;o)
update version 1.22:
-new Magnetic Field CarDock activator (use standart CarMode)
update version 1.23:
-added a Volumecontrol to longpress Searchbutton (i changed my keylayout to get a free hardwarebutton for FPSE ;o) )
update version 1.24:
-still shows batt% info (the notify is only updated on batt change)
-new design of CPU Icon (white bars on transparent background)
-profileeditor has now a rangebar for min/max cpu (this prevent from setting low max as min)
-a few perfomance tweaks and fixes
update version 1.26:
-this version remounts sdcard with 'noatime' (if selected in settings) when phone is disconnected from PC
update version 1.32:
-bugfix for phones with OMAP3 processors like Motorola Milestone, Milestone 2, Droid, Droid 2 Global, Droid X, A853/A854, XT701/XT702, XT711, XT720, XT800/XT800W, Defy, Flipout, Samsung Galaxy Beam, Galaxy A, Archos Tablet A70 A101
update version 1.36:
-added a "load current" button in voltage editor
-added hires icon for ICS
-put volumecontrol into a scrollview for small displays
update version 1.40:
-added the option to create swapfile (/sdcard or /cache) @ boot
update version 1.48:
-added the option to set swappiness for swapfile
update version 1.50:
-execute /sdcard/userinit.sh at boot
update version 1.52:
-added option to edit /sdcard/userinit.sh on board.
-added zram support
-added support for
for tegra voltage control
update version 1.57:
-you can use now zRam and Swap the same time (if your kernel support this) zRam get the higher priority!
update version 1.58:
the new version supports the following actions:
profilename is in -> intent.getStringExtra("profile");
this is to switch OC profiles from SmartQRTags but should also work from other apps i.e. Tasker
update version 1.61:
-added chargecontrol if "/sys/kernel/fast_charge" exist
update version 2.00:
-in the car on the dashboard to start cardock mode
-in the bedroom on the bedside table to activate the flight mode
-at home at the entrance door to activate wireless
-scan the barcode of a CD Cover and associate it to the belonging playlist
>>>> Switch on Display - Shake your phone - Scan QR Code - Done <<<<
its like SmartTags on Xperia2012 series ;o)
it includes settings to configure shake sensitivity and now you can use every QR Code you find !!! just cut one out of your newsletter if you need a TAG (just like nfc tags)
folloing action are possible:
-Enable/Disable Wifi Hotspot
-Enable/Disable Mobile Data
-Open Network Settings to change 2G/3G
-Open Gps/Location Settings
-Mute/UnMute the Phone
-Set Alarmvolume to MAX
-Enable/Disable Cardock mode
-Play Title or Playlist
-Start selected Application
-Send a Textmessage
-set Phone Volumes
-set Bass Boost
-reworked shake detection
-added a few actions more
-added a second icon to directly scan and apply a Profile
-switched storing from shardpreferences to sqlite database for better performance
-send sms works now
-start app works now
-few ui changes
-fixed the bug where scanner not opened while screen is locked
-action "data" now opens the mobiledata settings page (user have to check/uncheck the checkbox)
-added action "gps"
-option to disable the use of acceleration sensor
-fixed action "data" now works without user interaction
-added "send log dump" function
-added "play music/playlist"
-fixed the bug where you cant dismiss barcodescanner insallation
-fixed (hopefully) the bug where the phone stays unlocked
-if you have a modded phone.apk you can limit to 2G without user interaction.
-added a full mixercontrol to set volumes and bassboost
-a few bugfixes
-fixed playlist select/playback
-added googlemusic playlists
-added apply profiles by time
-added create shortcuts to desktop
-fixed ForceClose on start
-fixed timed profiles are not applied when device is in deepsleep
-added a notify when profiles are applied
-fixed create desktopshortcuts when icon are to big
-added the option to use Magneticfield as Trigger (usefull if dardock has magnet buildin)
-if you have my SetXperia (at least version 1.58) on your Phone. you can now switch OC profiles with smartQRTags ;o)
-if you have Systemcleanup (at least version 3.57) on your Phone, you can now trigger autocleanups with smartQRTags ;o)
-made the profiles screen scrollable (for small screens)