Wifi Inspector is a simple tool to see all the devices connected to our network (both wired and wifi, whether consoles, TVs, pcs, tablets, phones etc ...), giving relevant data such as IP address, manufacturer, device name and MacAddress.
Wifi Inspector also allows to save a list of known devices with custom name and find intruders in less than 30 seconds. This makes it easier for us and you will not need to go checking the data whenever we make a scan.
All this in a clear and simple design that allows us to see that our personal data are safe in a few seconds.
No doubt, Wifi Inspector ALWAYS find ALL connected devices!! More than 210,000 active installations demonstrate their reliability!!
We continue working to improve Wifi Inspector and we greatly appreciate that you share your opinions whether positive or negative. We have almost no reports of problems in the poor ratings (only one star with no comment) This makes difficult that we can improve the application. Please if you have any problems / suggestions do not hesitate to send it to us, in your comment or with email, and we will try to fix it.
For a better experience we recommend Android 4.0 or more
Fast and accurate, Fing is a professional App for network analysis. A simple and intuitive interface helps you evaluate security levels, detect intruders and resolve network issues.
+ Discovers all devices connected to a Wi-Fi network. Unlimited devices and unlimited networks, for free!
+ Displays MAC Address and device manufacturer.
+ Enter your own names, icons, notes and location
+ Full search by IP, MAC, Name, Vendor and Notes
+ History of all discovered networks.
+ Share via Twitter, Facebook, Message and E-mail
+ Service Scan: Find hundreds of open ports in a few seconds.
+ Wake On LAN: Switch on your devices from your mobile or tablet!
+ Ping and traceroute: Understand your network performances.
+ Automatic DNS lookup and reverse lookup
+ Checks the availability of Internet connection
+ Works also with hosts outside your local network
+ Tracks when a device has gone online or offline
+ Launch Apps for specific ports, such as Browser, SSH, FTP
+ Displays NetBIOS names and properties
+ Displays Bonjour info and properties
+ Supports identification by IP address for bridged networks
+ Sort by IP, MAC, Name, Vendor, State, Last Change.
+ Free of charge, no banner Ads
+ Available for iPhone, iPad and iPod Touch with retina and standard displays.
+ Integrates with Fingbox to sync and backup your customizations, merge networks with multiple access points, monitor remote networks via Fingbox Sentinels, get notifications of changes, and much more.
+ Fing is available on several other platforms, including Windows, OS X and Linux. Check them out!
If you turn on your WiFi radio, this app will turn it off before you have a chance to connect to a potentially malicous network.
Going to DefCon? Install this app and avoid being phwned!
*Works in Android >1.5
Get "Wireless Killer" to kill Bluetooth (for Android >2.1)
keywords: disable wifi, prevent wireless
If you turn on your WiFi and/or Bluetooth radio, this app will turn it off before you have a chance to connect to a potentially malicous network.
(Originally created for use at DefCon)
*Requires Android > 2
Get WiFi Killer for Android >1.5
keywords: disable wifi, kill wireless, prevent bluetooth activation, cancel bt
What you can do with arcai.com's Android Netcut?
1. You can quickly detect all network user in WIFI, even when your phone has no valid IP address or not been granted use wifi internet. as long as you connected to any WIFI, arcai.com's netcut can work.
2. Set on/off line to any network users, including phone/xbox,softphone, PS3, PS4 etc.
3, You can cut off network between two network users within LAN , by set one of the user as "gateways" , then cut off the other users, then those two users won't beable to talk to each other, eg: apple TV, Google TV, xiaomi box , cut off the phone connection to those box, will disable screen cast like feature.
4. Netcut Defender built in. (turn on and off in one click)
5. Scan network when you feel there are users still on network and you can't see it.
6. Check phone type, netcut will be able list type of phones.
7. Give user easy to remember name. Long press any network user, a pop up window will allow you input name for the user.
8, Detect attacker, if any one try to play arp spoof to you, you will be able to see it from netcut directly.
Retailers, crooks, the government, and others shady individuals are tracking your movements. Even when your Wi-Fi is turned off, your phone may be broadcasting information to whomever is in range which can be used both to track repeated visits to as well as your exact movements in an area under surveillance.
It's not a big step to couple this to personal information - a retailer for example, could track your trip to the register and correlate with your payment information. Now the tracking hardware and software vendors, the store (or chain) owner, their business partners, they can now all track where you are every time you come into range of one of their systems, and fully profile who you are, what you do, your financials, and your daily patterns!
That is just one example, but there are many uses for tracking you. Make no mistake, this is happening in the real world today.
One solution is shutting off Wi-Fi completely (including the background network scanning, a setting most people don't know about), but you would lose benefits like automatically connecting to known Wi-Fi networks and improved location awareness for your apps. It also does nothing to help the situation for others.
Pry-Fi will prevent your device from announcing all the networks it knows to the outside world, but it will still allow background scanning and automatically connecting to Wi-Fi networks. While you are not connected to a Wi-Fi network, the MAC address will constantly be pseudo-randomized, following a pattern that still makes the trackers think you are a real person, but they will not encounter your MAC address again. This will slowly poison their tracking database with useless information.
When you do connect to a Wi-Fi network, unless you specify otherwise, your MAC address will also be randomized - the same MAC address will not be used the next time you connect to this or any other network.
Though of course the companies involved with these trackers claim they wouldn't use the data maliciously, the possibility is there, and we all know that if something can be abused, ultimately it will be. There do not appear to be any laws against these practices yet, nor is it likely Wi-Fi will be redesigned any time soon to get rid of the information leaks.
But we can make an effort to reduce the usefulness of the tracking data for the exploiters. Pry-Fi comes with a War mode, which when enabled tries to make your Android device appear like dozens of people. Just wandering around an area under Wi-Fi location surveillance for a few minutes can ruin the tracking data for the period of your stay.
Proof of Concept
This is proof-of-concept code, and how for it will go in the future depends on interest and how well it works. It has been tested on several devices and seems to work, but it is very young still. The magic the app does to achieve its purpose is ever subject to changing Android security policies and OEM customizations, so even though it works now, there really is no saying if it will still be possible in future firmwares.
Of course you should also keep in mind that tracking can be done in many ways, and these W-Fi signals are far from the only method in use.
Further details, device compatibility information, FAQ, discussion, etc is all available on XDA-Developers.com here:
For now, if you want to report bugs or suggest features, send your comments to: firstname.lastname@example.org
Includes home screen widgets: one displays detailed connection info, another lets you switch among your favorite networks with a single tap, and yet another toggles WiFi Access Point.
Can scan for and switch to the best network out of several configured.
New and improved:
• "Material design" widgets (version 3.5).
• A UI redesign (version 3.0): modern looking icons, swiping between list and radar views.
• Assign your own descriptions and icons to individual WiFi networks - never forget what that "XYZ1234" network is;
• Switch among your favorite networks with a single tap by using the WiFi Network Switcher widget. It will even enable WiFi if needed.
• "Best network" to switch between different networks you may have around the house or office (off by default, enable in app settings);
• Automatic switching between fixed and dynamic (DHCP) IP addresses (Android Settings in 2.* can't do this);
Some features require that you purchase the $1.75 premium package, available right in the application through Google Checkout (safe, secure).
These features are: advanced per-network options (description, icon, IP address), the one-tap network widget, and two widget themes inspired by Android 5.* (Material Design, since version 3.5).
All the other - essential - features are free: the widget with detailed connection info (four sizes, two free themes), scanning and connecting to networks, the network list view, the network signal radar.
Orders are processed and saved by Google and can be reactivated after a phone reset / flash, or on a new phone.
About requested permissions:
"Change system settings" is needed to switch between fixed and dynamic IP addresses, if configured so.
"Prevent phone from sleeping" is needed so you can enable automatic scanning and discover open networks around you.
"Read USB storage" for notifications about open networks, when enabled, and the sound file is picked from the memory card.
"Market billing service" is needed to make purchases.
Since version 2.5, supports per-network IP address and proxy server settings on Android 3.* / 4.*, included in the free version.
If you have an issue or a question, please contact me at email@example.com (email is also shown in the about box and below).
Also - a visually matching Bluetooth toggle widget. Find it below under "Related" and "Developer Info".
Ever wanted to sniff out and plot those elusive open WiFi access points?
This wi-fi scanner uses your GPS and WiFi in combination to scan for Wi-Fi hotspots, then saves their location to a file which you can then export a KML file to Google Earth , export to Kismet, or use realtime web uploads to scan and upload in realtime!
Excellent for wardriving in your car, to scan lots of hotspots - it can handle logging the position of thousands of accesspoints without crashing and without posting duplicates.
Quite useful for site surveys (scanning for unsecured Wi Fi access points), or surveying large areas as part of a larger security audit. Has slow down options for scanning whilst walking as well, so you can go for a stroll or a run around a site and the scanner will still work without consuming lots of battery power
It can also be used if you just have a passing interest in seeing what is out there - for example you could take a drive around your city centre and see the state of access points (open, secured, insecure, etc).
The CSV export lets you export the data for manipulation in your favourite spreadsheet editor (Excel, OpenOffice / LibreOffice), or visualise access points using the KML export.
WiFi Tracker also knows about who made the accesspoint that it has found so can detect most accesspoints made by netgear, d-link, 3com, apple, linksys, and so on
If the Torque app is also running on the device, and you have a high-resolution (QStarz 818XT) GPS device connected to that app, then WiFi Tracker will augment it's GPS data automatically with the higher resolution data from Torque
If you have any suggestions, drop me an email using the 'contact developer' link and I'll see what I can do!
It will automatically activate when you turn off your WiFi and prompt you to set a time to turn it on. Don't ever forget to turn on your WiFi again.
Inspired and based off the source code of the original Shush! app by Jesse Wilson https://play.google.com/store/apps/details?id=com.publicobject.shush
Open Sourced at https://github.com/f2prateek/shush-wifi
Icons by http://www.androidicons.com/
Promo Graphic from http://www.flaticon.com/free-icon/wifi-signal_807
As a uniform management app, Huawei HiLink works with many Huawei products, such as Huawei Mobile WiFi (E5 series), Huawei routers, Honor Cube, and Huawei home gateways. It can be used to search for and manage all Huawei HiLink terminal devices.
Huawei HiLink is an app that lets you manage your HiLink devices from your phone or tablet.
•View network status, including your carrier name, roaming status, and signal strength.
•Manage connected devices, disconnect any device at the touch of a button, and set Internet access priorities.
•Remind you when you have low battery, steep data usage, and new messages.
•Save and back up the files in your phone or tablet to the microSD card in your HiLink device.
•Share photos, songs, and installation files without generating mobile data traffic.
•Diagnose and optimize your HiLink device to its optimum state.
•Toggle between sleep and standard modes.
•Enable parental control and set limits on the duration of Internet usage for children.
•Set up a guest Wi-Fi network to improve the security of your home network.
•Provide diverse functionality, including the Internet connection wizard, SSID and password modification, APN modification, carrier selection, and device shutdown or restart.
The functions that Huawei HiLink provides vary with the actual Huawei terminal device used.
Huawei HiLink APP can be used on the following devices:
Mobile WiFi (E5 series):
E5331, E5332, E5372, E5375, E5756
E5151, E5220, E5221, E5251, E589
E5730, E5776, E5377, E5786
E8231, E8278, EC315, E355
In just one click, kill all your applications which run in background !
Kill will also show you the location of your APK's Application.
THE NEXT VERSION WILL INCLUDE A WIDGET
Key words : Task Killer, task manager, gestionnaire de tâches
Stop plug-in your phone to test your apps!
Connect your device via WiFi, code like it's linked via USB!!
All you need is to have your device and pc connected at the same local network, then start ADB Connect and write in terminal "adb connect ", like wrote in my app notification bar.
When activated, ADB Connect will persist until a WiFi disconnection, not like other apps, that disconnect between minutes of inactivity!!
To deactivate this connection, all you've to do is tap again on app icon, done!
This app allow debug mode, LogCat and DebugTool functions. For your pc it's like to be connected via USB!! No drivers needed, only ADB installed (but you must have it already, you're a developer! ;) )!
Don't worry, this app don't persist in background. When started it will edit same configs and kill itself immediately!
- Create your own cool Vibrator beats with a nice step-sequencer
- Upload your creations to the online sequence database, so others can play them, rate them and comment on them
- Play, rate and comment on other people's Vibrator sequences
- Customize your incoming call/SMS vibrations on a per contact basis (It was a paid module before - Now it's FREE!)
Free Call&SMS functionality:
Now the Call&SMS vibration functionality is completely free, you don't even have to promote VibraSeq on Facebook as before.
#1: This is not a porn / sex partner / nudity app.
#2: As the developers of ChompSMS, Handcent SMS, etc... did not answer to my emails about supporting VibraSeq patterns in their apps, I removed the export function and did the call/SMS job myself.
This version is mainly based on the C64 variant of the game.
It is not a finished product. Please note that it is in an alpha state currently and treat it as an early preview.
I made this game out of pure enthusiasm. I'm not sure if it'll ever get finalized, so I decided to put the alpha on Google Play.
Powered by AndEngine.
Let's make a massive Level Set database together!
+ Level Set Editor
+ Online Level Set Database
+ Upload your Level Set, so others can Play / Comment / Rate it
+ Rate, Play, Comment on other's levels
+ Make progress on multiple Level Sets simultaneously: The game remembers your progress on each Level Set, so you can switch Level Sets any time.
+ Continue Game Button: Continue to play on the last played Level Set any time with a single click of a button.
As a start, play the official (difficult!) level set, then create and upload your own.
Hint for the Level Set Editor: Place only one ball object on a level. That will be the starting point and starting color of the ball on that particular level.
It is a free game, there is no paid version.
Works from Android 1.6 to 3.0.x (also tested on Motorola Xoom Android 3.0 Honeycomb tablet)
Original concept by: Oliver Kirwa, Crillion: C64, 1988