- show wear's battery level (0%-100%)
- show phone's battery level (0%-100%)
- show weather
- show temperature
- show sunrise/sunset(daytime) time in the 24H gauge
It will be installed on your watch automatically from your phone paired with your watch after a short time and please wait.
After installation,you can choose the watch face from the setting menu.
Or just long tap on the current watch face screen,so watch face selector screen will open.
Option to set your location
- Automatically set your location by using location provider.(Low battery consumption)
- You can set your location manually.(No battery consumption)
Keep your phone's connection to wear to display weather.
It needs following permissions.
- INTERNET (Download weather information)
- FINE_LOCATION (Specify your location automatically)
* V04 WATCHFACE MAKES NO GUARANTEE OF VALIDITY OF WEATHER.
* Please note that technical specifications are subject to change without notice.
More watch faces
- Visit our exclusive watchface collection for Android Wear on the Play Store
- °F (Fahrenheit)
- °C (Celsius)
- 12H (2ways)
Settings:Normal Mode Brightness
You can change watchface brightness on Non-Ambient mode
Settings:Ambient Mode Brightness
You can change watchface brightness on Ambient mode
* Tap the watchface icon on your PHONE to setup.
- If you don't like this model please cancel your order in 15 minutes. And try another watch face.
This watchface is designed for Round-faced Android Wear Watch.
It is an unofficial watchface for LG G Watch R. LG G Watch R ownership reserved by LG.
Tested with LG G Watch R
*Smartphone and Android Wear must be paired before you use it.
If you have a question,plsease contact our email address in English.
Be aware of gravity. For every action there is equal opposite reaction.
Start measuring the G-Force with your G-Meter application.
With this application you are able to measure the G-Force acceleration.
You are also able to see your speed, rpm, breaking activation, pedal pressure and current gear in real time.
*Day & Night mode*
The application switches to night mode automatically. Enjoy the drive with your application in every condition.
For your security, watch the current traffic situation and do not operate the device while driving.
NOTICE: This application requires to be connected to the SmartGate. To connect, access to the settings of your smartphone and select the Wi-Fi network named DIRECT-SmartGate-XXXXXX.
A password is required, please refer to your SmartGate manual for more information.
If you want to switch units from metric to imperial: Go to Menu of the application > Settings > Change the unit settings
*To learn more about SmartGate technology visit: www.skoda-auto.com
o Use this app to quickly measure you car's engine and braking performance.
o Its easy to use - just place your Android device in your car, wait a few seconds for the self-calibration to complete, press Reset and you are now ready to measure "G" force.
o Simply drive around as you would normally and the app will show your current acceleration and records the maximum forces on the vehicle in the forward/back and side to side directions.
o The vertical axis shows acceleration and deceleration along the vehicle's direction of travel; The horizontal axis shows
lateral acceleration during cornering.
o A pointer shows the instantaneous magnitude and direction of acceleration.
o The instantaneous acceleration/deceleration value is shown (upper circle) as well as the absolute maximum recorded acceleration/deceleration experienced (lower circle).
o Maximum acceleration and deceleration values in each axis are shown on "tags". These can be cleared using the Reset button and saved using the Save button. Saved values are shown by orange "tickers".
o Toggling the Run button allows the current display to be frozen to retain current values.
o The range of measurement can be set to 1g, 2g or 4g. Use 1g for normal town driving, 2g for fast road and 4g for track.
The app can be used with the device flat on its back or in an upright position. When flat, vehicle acceleration/deceleration is measured along the device's Y axis. When upright, acceleration/deceleration is measured along the Z axis. In either case, the device should be securely positioned and orientated "square" to the vehicle axis. i.e. The Y (used flat) or Z (used upright) axis should be aligned to the vehicle's direction of travel.
Lateral acceleration is always measured along the X axis.
The orientation is set when the user presses the Reset button. The axis in use is identified in a message below the Run key.
The app is self-calibrating - there is a low pass filter that eliminates the contribution of gravity to the acceleration measurement. This takes effect once the device is settled in position in the vehicle. Once the acceleration pointer comes to rest, the user should press the Reset button to set the primary axis and clear the max values.
Due to the effect of gravity, rapid changes in orientation will result in acceleration readings. Therefore, once the calibration process is complete the device orientation should not be changed while the app is in use.
Note: This app is not suitable for tablets. It is designed to work in portrait mode only on handheld devices with screen resolution of at least 160 dpi. It works well with screen size of 320x480, 480x800 or 480x854.
Use this FREE version to practice for future versions that will have more complicated missions...
A note on controls: pushing the stick on real helicopters will cause the aircraft to accelerate in that direction, just like this HeliPilot app. Hovering a helicopter is very similar to trying to use the tilt of a board to keep a marble inside a circle painted on the board. As you can imagine, this is challenging; you have to slow the aircraft down before reaching the helipad to be able to hover over it.