IPSet AKCP

AKCP

About this app

AKCP IPSet is a commissioning tool for AKCP network sensor gateways and monitoring hardware. It replaces the Windows IPSet utility for technicians who install and service AKCP equipment on site.

When you press the reset button on an AKCP device, the device opens a short setup window and announces itself on the local network. AKCP IPSet listens for those announcements, lists every device it hears, and lets you review or change the device's IPv4 network settings without a laptop.

WHAT YOU CAN DO

- Discover AKCP devices announcing themselves on your Wi-Fi network
- See each device's IP address, MAC address, DHCP or static mode, netmask, gateway, primary DNS, model, firmware version and hardware ID
- Assign a static IP address, netmask, gateway and primary DNS
- Switch a device to DHCP
- Open the selected device's built-in web interface in your browser
- Follow every step in a status console that mirrors the Windows IPSet output
- Copy device details or the full console log to the clipboard

HOW IT WORKS

1. Connect your phone to the same Wi-Fi network as the AKCP device.
2. Press the reset button on the device once to open its IPSet window.
3. Open AKCP IPSet. Listening starts automatically.
4. Select the device from the list.
5. Edit its network settings and tap Apply Config, or open its web interface.

REQUIREMENTS

- Your phone must be connected to Wi-Fi. Mobile data alone will not work.
- The phone and the AKCP device must be on the same local network segment, because discovery uses local network broadcast.
- Changing network settings requires device firmware that reports IPSet configuration support (STMProbe_refactored version 50 / 1.0.50 or later). Older firmware can still be discovered and its web interface opened, but its network settings cannot be changed from this app.

PRIVACY

AKCP IPSet does not collect, store or transmit any personal data. All communication stays on your local network between the phone and AKCP hardware. The app requires no runtime permissions.

This app is intended for AKCP customers and installers. It has no function without AKCP hardware on the same network.

What’s new

Initial release. Discover AKCP network sensor gateways on your local Wi-Fi and configure their IP address, netmask, gateway, DNS, and DHCP/static mode.