The Widget understands Imperial and Metric. You can change this at any time.
Shows an estimate of how much a board might grow and shrink under different conditions, based on verified information for over 270 distinct species. You can enter measured or humidity-based water content, board width, and how the board was cut from the tree (anywhere from flat to quartersawn). The amount of change is shown as you edit.
Easily enter the 3 dimensions required for calculating board volume and get an immediate amount. You can also enter a price and quantity of boards for a total price. The local currency is automatically used when entering prices.
A species comparison tool that lets you walk through information on up to 288 species of wood, comparing hardness, density and movement. It even shows you which species is "better."
Decimal to Fraction
Enter fractions and see the decimal results, or enter decimal values and see fractions calculated, all in one place. Remainders and reduced fractions are automatically shown.
A species data viewer which also includes "other names" for up to 288 species.
Mix or dilute shellac in any amounts. Enter a "pound cut" and the measurements are balanced for you. Mix as much or as little as you need, using not only gallons and pounds, but also cups and ounces or liters and milliliters. Dilute from any pound cut that you have on hand to any other concentration, instantly!
Test your framing squares, combination squares, carcasses or anything else that needs a perfect right angle for accuracy by measuring lengths. The Widget will show you how far from "right" the angle is.
If you have any problems, please email: email@example.com.
Offer to your attention a simple system status widget. It's implemented in the form of switch unit data representation. Such representation is dictated by the objective to make the widget intuitive and user friendly providing maximum of informativeness.
The widget is designed to display the current system status: CPU load; battery charge; used RAM; volume of the extended memory occupied; brightness set value; remaining operating time.
The left side of the dial is graduated from 0 to 100%. Central large arrow on it displays the CPU load. Triangular-shaped pointer displays the remaining battery power.
Right scale of the dial is designed to display the values of memory occupied. The central long arrow indicates the number of RAM occupied. Triangular-shaped pointer displays the volume of the extended memory occupied.
At the top center of the dial displays the numerical value of the remaining free RAM.
Center of widget divided into 4 sectors. In the lower right part appears numerical values of RAM occupied (megabytes). At the top right appears numerical value of volume of the extended memory occupied (gigabytes).
At the top left shows the percentage of the current CPU usage. In the bottom left shows the percentage of remaining battery power.
At the top of the widget displays the current brightness value (in percentage) and also its relative value as conditional graphical notation on a linear scale.
At the bottom of the widget displays the predicted remaining time of continuous operation which is limited by remaining battery charge and the current power consumption.
In the settings you can set the refresh time readings. It is not recommended to set the refresh period is less than 10 seconds because of higher energy consumption. The widget is fairly economical If you do not abuse the refresh time.
Also in the settings you can set the background transparency to adapt it to your desktop picture.
We hope, the widget will be useful and convenient for you and will help you quickly assess the current status of the device resources with just a glance at the data on the scale.
- Several button styles to select for the widget.
- Very fast connection and disconnection of 2G 3G Internet mobile data manually.
- A great design simple and very intuitive, very fast to handle.
- To save RAM and battery, if you turn on the WiFi, the app ignores the change without updating the widget icon, but will use the WiFi connection.
1. Users must add the widget, as explained in this guide: http://google.about.com/od/socialtoolsfromgoogle/ss/how-to-add-android-widgets.htm?rd=1
2. Installed widgets in the external memory (SD card) may not work properly.
If you find it useful, give us your opinion, it will be welcomed.
If you have questions or suggestions do not hesitate to contact the developer mailing.
BY DOWNLOADING AND INSTALLING THIS SOFTWARE YOU ACCEPT THE TERMS AND CONDITIONS BELOW:
1. YOU EXPRESSLY UNDERSTAND AND AGREE THAT YOUR USE OF THE APPLICATION IS AT YOUR SOLE DISCRETION AND RISK AND THAT THE APPLICATION IS PROVIDED AS IS AND AS AVAILABLE WITHOUT WARRANTY OF ANY KIND.
2. YOU ARE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR MOBILE DEVICE, OR OTHER DEVICE, OR LOSS OF DATA THAT RESULTS FROM SUCH USE.
3. THE APPLICATION IS NOT INTENDED FOR USE IN THE OPERATION OF NUCLEAR FACILITIES, LIFE SUPPORT SYSTEMS, EMERGENCY COMMUNICATIONS, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL SYSTEMS, OR ANY OTHER ACTIVITIES IN WHICH THE FAILURE OF THE APPLICATION COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE.
Keywords: 2g 3g gprs edge umts hsdpa hsupa data
Widget sizes - 4x1, 2x1, 1x1.
More features available in PRO version:
- Network type notification;
- Signal strength notification;
- Text customization;
- Color customization;
- Using custom tags for display additional values, such as LTE signal strength.
Tags for text customization:
$$NWOPN$ Network operator name
$$NWOP$ Network operator MCC+MNC
$$LAC$ Location Area Code
$$CID$ Cell ID
$$PHTP$ Phone Type
$$SSDBM$ Signal Strength (dBm)
$$CDMASID$ CDMA System ID of the current cell site
$$CDMANID$ CDMA Network ID of the current cell site
$$CDMABID$ CDMA Base Station ID of the current cell site
$$ESS:N$ Extra values.
$$MEMF$ Memory Free
$$STOT$ Storage Total
$$STOF$ Storage Free
$$SDCT$ SD Card Total
$$SDCF$ SD Card Free
$$BATP$ Battery Percentage
$$BATV$ Battery Voltage
$$TEMPC$ Temperature (Celsius)
$$TEMPF$ Temperature (Fahrenheit)
$$CDMADBM$ CDMA RSSI value in dBm
$$CDMAEI$ CDMA Ec/Io value in dB*10
$$EVDODBM$ EVDO RSSI value in dBm
$$EVDOEI$ EVDO Ec/Io value in dB*10
$$EVDOSNR$ EVDO signal to noise ratio.
$$GSMER$ GSM error rate (0-7)
For more info see online help and widget config.
Note: Some Samsung Galaxy S2, Galaxy Tab, Galaxy Note have screwed API and returns unknown signal strength. http://code.google.com/p/android/issues/detail?id=18336
If you have no working well signal diagram, you don't need to upgrade application to pro version.
** Supported network types: GPRS, EDGE, UMTS, CDMA, EVDO 0, EVDO A, 1xRTT , HSDPA, HSUPA, HSPA, IDEN, EVDO B, EHRPD, HSPA+
Including: Bubble Cloud Launcher for Android Wear → http://goo.gl/vkMvNK + video from 3:33
NEW: Bubble Cloud Watch Face Launcher read: http://goo.gl/eP3KD1
Instructional video demos it all
Problems? Questions? http://goo.gl/mjDFb6
Nothing shows? http://goo.gl/QLtTzo
WARNING: non-PlayStore (pirated) copies of my app have been found to be altered and repackaged, and thus may contain virus.
►Over 25,000 downloads
►Phone Arena http://phonearena.com/news/The-best-Android-Wear-apps_id66915
►Android Police http://goo.gl/5vDVXJ
►Strap Blog http://goo.gl/OJZgxk
►AVR Magazine (Italiano) http://goo.gl/LLCnzK
►Enjoyphoneblog (Italiano) http://goo.gl/gQKaK2
►Blick.ch (Deutsch) http://goo.gl/byGYoG [incl video]
►Octoba (日本語で) http://goo.gl/ARxZ4a
►English http://youtu.be/vu8wNx8nvko?t=139s ►http://youtu.be/A3NKSASsafs
►Español http://youtu.be/YTDRW34RSSg ►http://youtu.be/HW3_c8JOauI ►http://youtu.be/1HELhejwVWc ►http://youtu.be/TLhhGltSv08 ►http://youtu.be/GmOEFEdt0Lw
With one app get Bubble Clouds both
►on your phone+tablet's home screens as widgets
►on the screen of your Android Wear smartwatch
Use it on either, or on both!
Bubble Clouds are amorphous groups of colorful circles. They give you access to your
Trick: Bubbles grow with use. More frequently used bubbles stand out from the crowd
BUBBLE CLOUD LAUNCHER FOR ANDROID WEAR
►see in comprehensive video: http://youtu.be/Daa2hsanBhY?t=213s
►access Bubble Cloud App Drawer Launcher from any screen by double tapping or swiping in from the edge
►or set BubbleCloud WatchFace Launcher - the most functional watch face ever!
►extreme care for battery efficiency
►live info bubbles: clock, battery, etc
►contact bubbles: call, text, email contacts from the watch
►First ever launcher with Sticky Open mode: double tap to open AND keep app on screen (it reopens when screen un-dims) → see video http://youtu.be/Daa2hsanBhY?t=9m3s
HOME SCREEN WIDGETS
►App Bubble Clouds: add apps by Play Store categories, newly installed apps are populated automatically
►Bookmark Bubble Cloud: add links using "Share link" from any browser
►Contact Bubble Clouds: add people by contact groups or call log. Auto-population
►Mixed content clouds
►You get to support an independent app developer who is devoted to creating apps which put YOU in control
►No upgrade reminders (watch/phone)
►Auto-populated clouds: bubbles added automatically
►Unlimited number of App Bubble widgets [free=1]
One time in-app purchase: buy once, use it on all your current and future devices!
WE NEED YOUR HELP
If you like this app please leave a 5-star review. We are getting 1-stars, all without any comments or reasons. You know I heed criticism, and do my best to fix anything not up to the demands, but low ratings without explanation...:-( Even a 4-star lowers the overall grade, but in this system five ★★★★★ ratings balance out a single ★ down-rate!
Thank you all who help!
PHONE,CONTACTS,READLOG: Contact bubbles
VIBRATE,SYSTEMALERT,BOOT: Wear mini launcher
SMS,ACCOUNTS,CREDENTIALS: text+gmail from watch
►Moto 360, LG G Watch, LG G Watch R, Gear Live, ZenWatch, Sony SW3
►Out of the box: Apex, GEL, Touchwiz, Nova + many more