It also allows you to set repeating sounds on vibration patterns for you notifications. You can also set a "sleep" mode or "on charge" where the lights and/or sounds and vibrations will not be heard or seen. If you've come from a Blackberry device and miss the features of BeBuzz / BerryBuzz then give LightFlow a try!
This program will allow you to control the notification color for the over 600 applications and system events such as:
* Missed calls
* Voice mail
* Calendar reminders
* SMS messages
* MMS messages
* Low battery
* No signal
* Google talk
...and many many more
See our website for a full list of applications supported:
It allows the colors to flash in succession, so if you have a new SMS and a missed call it can alternate between the two colors. You can also set which notification type has the highest priority and let it flash in just that one color.
It'll even push notifications out to your pebble smart watch, Sony smart Watch and the DashClock lock screen extension.
For a full changelog see here: For a full changelog see here:
For a full list of permissions required and why see here:
Samsung phones when accessibility is enabled may cause the phone to start talking, warnings about air view and a few other issues. These are confirmed samsung bugs (see here: http://developer.samsung.com/forum/board/thread/view.do?boardName=GeneralB&messageId=204387) but the app can be run without the accessibility service and still work (but with a reduced notification list)
Not all phones support all colors.
For example: Most HTC phones only support 3 colors and require "Rooting" and running the app in "direct mode"
Some phones can only light up the notification while the screen is off.
Some phones cannot have their notification light always on
Some phones cannot have their notification blink and it will always be on
Note that it will take over control of your notifications and you will therefore only get notifications for categories that the app allows.
★ We recommend you try the "lite" version first before purchasing to avoid any disappointment if it doesn't work for you. Some phones require root privileges to access the LEDs. ★
★ For the differences between this version and the lite version see here: http://www.folioflow.com/ff/page/website/lightflow/pageId/1687 ★
★ If after updating you have problems we recommend you reboot your phone ★
** Most HTC phones require "direct mode" setting. Most gingerbread builds for HTC phones require root access due to HTC changing the permissions on the LED control files. **
** If upgrading from the "lite" version, please uninstall the lite version first but you can backup and restore settings between versions **
Smart Connect extension for SmartWatch 2
LiveWare™ extension for SmartWatch
- color screen
- Morse code
- police siren (light + sound)
- SOS (rescue signal)
- warning lights
With this application you can learn Morse code or just have a fun.
Keywords: light, flashlight, torch, lamp, pocket, Lampe, Beleuchtung, Fackel, latarka, światło, torcia, lanterna, фонарик, фенерче, TaschenLampe, 플래시라이트, flashlight android, 手电筒
LED Torch Light uses your phones LED camera flash light as a torch. All you have to do is press the picture of the torch to turn the flash light on or off.
- What if your phone doesn't have an LED flash light?
Don't worry, instead of trying to turn on the LED flash light your screen will brighten up and will turn white thus giving you a torch light!
- Strobe light.
You to can have your very own strobe light! All you need to do is enable the strobe light feature, from the settings screen, to turn your torch light in to a strobe light! Your phone doesn't even need to have an LED flash light either because it can work using the screen light.
There are two settings in the settings screen:
*The "Flash Frequency" is the amount of time between each flash of the light, number of beats per minute.
*The "Flash On Time" is the amount of time the flash light is on for, in milliseconds.
- Traffic light.
What the traffic light go through it's sequence red, amber and green. Simply press the menu button and select Traffic Light. Touch the screen to start the sequence. Touch the screen again to stop the sequence.
*TAKE PICTURES AND VIDEOS*
This permission is needed because on some phones you need to access the camera in order to access the flash light on your phone. This permission is not used for anything else. The flash light is there, after all, for the camera!
This permission is needed to access the flash light on your phone, it is needed along with the above permission to access the camera.
*FULL NETWORK ACCESS*
This permission is needed to show the adverts in the app. The adverts are there in order to bring this app to you free of charge that's all!
*VIEW NETWORK CONNECTIONS*
This permission is needed to show the adverts in the app. As per the above permission.
*PREVENT TABLET FROM SLEEPING PREVENT PHONE FROM SLEEPING*
This permission keeps the screen on while the app is open so that the flash light stays on! If the screen was to turn off your flash light would also turn off!
Like me this LED torch light might have a bug or two! If you do find a bug or have an error please let me know (hit the report button if it errors). I have limited phones to test on so I can only apologise if this does not work on your phone. But please do let me know and I will try to get it to work!
Please let me know if you have any comments/ideas etc. they are always welcome! :o)
Swipe your finger around the screen to get the color of your choice.
Tap the middle of the screen to reset to white light.
You can use the menu to switch between bright colors and pastel colors.
No permissions required!
When running, the app sets the brightness of your display to maximum. Light emitted depends on the maximum brightness of your screen.
You can adjust the screen brightness and a brighter/darker image.
- Swipe left <-> right to switch seamless between a darker and a brighter image.
- Swipe up<->down to adjust the screen brightness.
- Switch digital clock on/off
- Turn LED flashlight on/off
- Turn screen flashlight mode on/off
- Sleep timer (Turns off screen and closes application)
Click the sleep timer button repeatedly to change the timer value.
* No unnecessary permissions
I might release a version with settings that might cost money, but for now this application is completely free.
You can select whether you want the screen in full black or full white with maximum brightness just by tapping the screen or shaking the phone a little bit, this shaking feature is really handy if you are sleepy and you can't find your phone in the middle of the night.
Additionally, tap and hold to progressively move from full dark screen to full brightness. and vice versa.
It is very important to keep your phone plugged to the power adapter while the app runs, the phone is always responsive and the screen and processor are ready for your input so if you don't plug your phone you would run out of battery in the middle of the night.
It is a free download which I hope you like it being such a simple app, and you find it useful. It is just launched so please rate it in the market and leave me your (hopefully constructive) comments and ideas for it.
Professional light intensity (lux) meter for your device.
It measures illumination levels in lux.
■ direct reading in lux
■ 0 to 1000lux in 2 ranges
■ automatic range change
■ support for neutral filters
■ more range by using filters
■ more range by using dividers
■ 5% max error (device dependent)
■ predefined and custom calibration
■ sensor linearity correction value
■ alternative display in fc (foot-candles)
■ realistic vintage analog look
■ 18 case skins
This app requires devices with a light sensor. It uses native light sensor data acquisition that gives accurate and instant light intensity reading. This type of native data acquisition is available only for:
■ HTC (Hero, Magic, MyTouch, Legend, Desire, Wildfire etc.)
■ Samsung (SGS, SGS2, SGS3, SGS4, Vibrant, Epic, Captivate, Fascinate, SGTab, Note, Note2 etc.)
■ Sony Ericsson (SE X8i, X10, XT etc.)
■ Asus (EeePad, Transformer etc.)
Other devices are also supported by the built-in compatibility mode but the accuracy and the speed of light intensity reading may be limited and custom calibration is required for correct reading under compatibility mode.
Also, on some devices the light sensor may not be linear, not continuous and measuring errors will occur or the maximum measuring range may be limited. This is not app's fault.
Make your device become a feasible flash light.
Turn on or off your Flashlight just by one click.
This application is very useful when you walk in the dark. You will be more safe with the light of your phone.
- Brightest flashlight
- Fast boot up
- Elegant design
- Small apk size
Device tested: Samsung Galaxy S, Samsung Galaxy S2, Galaxy S3, Google Nexus S, Nexus One, Galaxy Nexus, LG Optimus 2x, LG Optimus One, LG Optimus LTE, HTC Desire, HTC ONE X, Motorola Atrix, Motorola RAZR, Nexus 4,Nexus 5 ....