Can be used for
• Picnic tables
• Drum Staves
• Banjo Rims
• Bird Houses
Of course its Ad Free.
Bend Types Supported:
-Offset (Far Bend Critical)
-Offset(Near Bend Critical)
-Rolling Offset (Far Bend Critical)
-Rolling Offset (Near Bend Critical)
-Three Bend Saddle
-Four Bend Saddle
-90° Stub-Up Bend
-Kicked 90° Bend
-Segmented 90° Bend
Preference settings allow all calculations to be performed using inches or centimeters. Deduct settings for 90° bends can be customized for ½” through 4” conduit (16-103mm).
If you are not 100% satisfied with this calculator please email us at email@example.com so we can make things right before posting negative reviews.
We strive to ensure compatibility with all new and existing Android devices. If you experience any problems with the layout/display of this app on your particular device please let us know so we can get it resolved. We are also open to any suggestions you may have for future enhancements to this calculator.
*Sliders for fast entry
*3 point saddles
*Calculate offsets at any angle
*Snaps to common bending angles
*Pure calculations (no tables used)
*Calculated @ 1/1000" then rounded to nearest 1/16"
If you have any comments, questions, or suggestions, please send them to: firstname.lastname@example.org.
Conduit, Electrician, Bending, Calculator, Bender, Bend, Electrical, Pipe
This App has 5 sections
Calculates the percentage fill for mixed THHN insulated copper conductors in various types of conduits.
Calculates the voltage drop for single & three phase systems with power factor (Unity & Lagging)
AC Motor full load current finder:
Helps you quickly find AC motor full load currents from NEC tables:430.248, 430.250
Cable support table
- Length and Height of the Arc;
- Length of Chord and Angle of the Arc;
- Length and Angle of the Arc.
This program is working with Metric data.
N.B. Always check your Setting-Out and Calculation with different methods and common sense ("sound and prudent judgment based on a simple perception of the situation or facts"). Developer and/or distributor of this program can NOT and will NOT be hold responsible for any mistakes which happened as a result of using or not using this program. By downloading and installing this program user agree to it and accept full responsibility.
Its very precise up to 40 digits, unlike a normal calculator that only provides 15 significant digits calculation.
Easy Calculator Pro supports date and time functions, may display result in various formats, can work with constants and mathematical functions.
Easy Calculator Pro allows you to keep all the history of your calculations, make notes, send by email or return values and expressions back to the calculator.
* Expression calculation.
* Calculation history.
* Advanced percent calculation (Discounts, Tax, Tips).
* Precision up to 40 significant decimal digits.
* Advanced result formatting. As: numbers, dates, percents, hex, oct, bin... representations.
* Can display result as fraction: 1.125 -> 9/8 or as 1+1/8
* Expression syntax highlight - easy reading.
* Exact error highlight - easy correction.
* Engineer and scientific functions.
* Date and time operations
* Radians and degrees with Degree-Minute-Second (DMS) feature
* Support angle measures in degree and decimal notation: d°m.m' and d°m'.m
* Saving state between sessions.
* Memory feature.
* Smart-button technology.
* Predefined constants.
* Vibration on touch.
* In-app purchase donate feature. If you like this program, you may help us to maintain and improve the EasyCalPro Free.
Percent feature allows you easy ways to calculate tips, tax or discounts:
7*2 + 1.5*4 + 10%
Using the constants you can easy find out the radius of the Earth:
date (12;05; 15) + 40*7 - get date offset (40 weeks)
40/tan(37°23') - easy way to find height of building with angle of elevation.
Or find out the poker probability of specific pocket pair:
C(4; 2)/C(50; 2)
KW: engineer scientific advanced calculator, EasyCalcPro, Tip Calculator, navigational calculations.
Well I work in Carpentry and is hard the pressure to calculate by hand the length of your Rafter or even show the hight of the roof without wasting material.
Is simple just enter the Length of the Gable Wall from the Outer side, enter the wall Thickness, Pitch and the thickness of the Ridge, and that's it, you got the length from the bottom part of the plum cut, to the Bottom of the rafter where the Inside of the Top plate touches.
Let me know any problem and I'm working in more options, just want to know how this goes, put some pictures for help.
Also I'm working in a better Graphic User Interface
Explain : This application use with IOIO or IOIO-Q board you can buy in www.inex.co.th
** Must be connected by USB for stable 7-segment's blink rate.Not recommended using a bluetooth **
Explain : This application use with IOIO board you can buy in www.sparkfun.com or www.inex.co.th
Circuit for this application
Connect IOIO board with 7-Segment by
Port 1 : A
Port 2 : B
Port 3 : C
Port 4 : D
Port 5 : E
Port 6 : F
Port 7 : G
Port 8 : DP
Port 12 : Digit 1
Port 13 : Digit 2
Port 14 : Digit 3
Port 15 : Digit 4
Download source code from
I tested it under different lighting conditions and devices. The code can be checked out from following link and you can find more details in the comments.
NOTE: before running my apk, please install “OpenCV Manager” first. It can be found in Google Play.
The OCR process has three main steps:
1) Use edge detection algorithm to get the contours in the image.
2) Locate the digitals using vertical projection information.
3) Recognize the digitals based on their structure characteristics through a traversal method.
2.1 Edge detection
I use Canny detection algorithm to get the contour information and the result looks very good.
2.2 Vertical projection
After getting the contours information, I scan vertically to get the vertical projection of the image in the “locating box”. The box is used to help locate digital area approximately (the user only need to put the digitals in the box when scanning). The projection value is actually the number of white points in vertical direction. Obviously, the projection value between two digitals is lower. Thus, based on the information, we can locate every digital.
2.3 Traversal method
After finding the positions of the digitals, we will traverse every digital from three different directions and then recognize them based the traversal results. See the example of digital “3” in the last figure. When we traverse the digital along line a, b and c, the number of passed segments should be 3, 1 and 1 respectively. Thus the recognition code of “3” is “311”. That is, for an unknown digital, if its code is “311”, it might be digital “3”.
Cut Guide is used as a prediction method for sawing object which is square shaped.
Currently, it provides functions for wooden object. Additional functions will be supported in the near future.
Just use it at once!
We will repay you for improving the application.
Any idea or feed back would be appreciated.
(Please contact us via email.)
D.I.Y, DIY, Cutting, Guide, Saw, Saw Guide, Wood Cutting, Wood,