Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
There are many apps that save battery or increase performance, however Root Booster uses the most proven settings to achive the best results. You can easily apply these settings with preset modes which ensure speed boost, battery boost or stability boost. These modes are achieved by applying appropriate settings to the main phone components. Here are some explanations for what particullary Root Booster does to your CPU, RAM and Android OS system.
Hibernation (Android OS optimizer)
Each Android application can have one or multiple services. They run in the background and usually perform some kind of task. Many people think that when they kill an application, it completely stops draining your battery and computing power, but that's not true. Application still have servicies that are running after killing and still drains battery and comuting power. On the other hand, if you hibernate an application it stop it\'s servicies and application does not drain battery and CPU computing power anymore. Hibernation is gently and efficient way to save your battery and increase performance.
Root Booster will find battery draining and performance demanding applications and auto hibernates them.
CPU (processor governor control)
A governor is a driver for the regulation of CPU frequency. Governor decides how fast and when will be achieved maximal or minimal CPU frequency. Setting apropriate governor makes your device more battery saving, fast or even more stable. However, deciding which governor is suitable is a little bit tricky.
Root Booster can decide which governor you should use and automatically applies the most suitable governor for the selected mode.
RAM (memory manager)
Each application uses VM heap for it 's data and work. The main reason to change the VM heap size is stability improvement. Many big applications need a big amount of memory (VM heap) for their work. If the VM heap size is smaller than the requested memory, it causes an application crash (Out of memory error). Setting heap size is hard task and there is no manual to set up for better performance. Better performance can be only achieved by testing.
Root boster will test your RAM and sets up your VM heap size for better stability and performance.
This application comes without warranty, only use it if you are 100% sure what you are doing!
Improper use can make the system unstable, so please inform yourself if you are unsure about a certain feature!
This app is open source
Device Control is an app to control several features of your device as well as some nice extra features like a Tasker, App Manager, Editors, Entropy Generator, Wireless Filemanager and more.
With Device Control you can tweak and edit:
[+] Device specific features like Knock-On, vibration strength, screen color temperature, LCD power reduce, ...
[+] CPU frequencies, governors, i/o schedulers, ...
[+] GPU frequencies, governors, ...
[+] Kernel specific extras like intelli-plug and intelli-thermal by faux, msm dcvs toggle, mpdecision toggle, power scheduling, power efficient workqueues ...
[+] Voltage Control, Fast Charge and more
Note: Features need to be supported by your device. Unsupported features are getting automatically hidden!
It also can monitor:
[+] Your cpu and battery temperature
[+] Time in state of your cpu
[+] Maximum, minimum and current frequency as well as the governor of your cpu (fully multicore aware and toggle able auto refreshing intervals)
Extra tools like:
[+] Tasker (automatic fstrimming, screen off and on actions ...)
[*] Example: You can configure it to automatically toggle your cpu's frequency to a very low value once your screen turns off, to save battery, and restore the value when you are using your phone again.
[+] Editors (vm, sysctl, build.prop, ...)
[+] Quick tweaks (vm, build.prop, ...)
[+] Wireless Filemanager, allows you to access your device's sdcard / internal storage via any webbrowser
[+] App Manager to view information about the app, kill it, view them on Google Play Store, disable / reenable your apps to prevent them from running and hiding them from launcher
Device Control can automatically restore your settings on boot (sections to restore need to be checked in preferences)
Device Control is 100% ad free and will always be.
No need to spend money, you get every feature without paying or donating.
Device Control is in active development, if you like to contribute to the development or just buy me a beer, you can donate via in app purchases!
Donations are not required but highly appreciated!
Explanation of permissions:
ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: To read your ip address to display it at the Wireless Filemanager
ACCESS_SUPERUSER: Device Control requires root to function properly.
BILLING: For the optional in app donations.
INTERNET: Required for our built-in error reporting service to submit bug reports.
READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE: Needed for the Wireless Filemanager
READ_PHONE_STATE: For better detection of your device.
RECEIVE_BOOT_COMPLETED: To restore your tweaks on boot up of the device.
VIBRATE: To test the vibration strength.
GET_PACKAGE_SIZE: To display size statistics at the app manager
GET_TASKS: To allow to detect running apps and kill them via the app manager
REBOOT, DEVICE_POWER: Used by the flasher to reboot the device without super user permissions on NamelessRom
** Xposed framework is required http://forum.xda-developers.com/showthread.php?t=1574401 **
Intelli3G will intelligently manage your 3G connection and prevent your phone from losing battery when you are not using it. Intelli3G will put your phone on 2G network when it is your pocket. It will not disable your data like most other apps. You will still get all your notifications with minimal battery drain.
- Manual 2G/3G toggle
- Switch to 2G on screen off without interrupting any downloads
- Switch to 2G when you are connected to a WiFi network.
- Switch to 2G when data is disabled
- Switch to 3G on screen unlock
- Switch to 3G when bandwidth intensive apps are launched
- Disable service on call/hotspot/charge
Intelli3G featured on XDA:
I observed the below facts about the Nexus 4:
- On 3G idle, you lose around 3-4% battery per hour depending on your 3G network strength.
- On 2G idle, you will lose less than 1% per hour.
I realized that I was constantly disabling 3G to get through the day. Then, I wrote this app to replace all the manual toggling to conserve battery.
If you have had the following problems on your Nexus 4, do try this app
- You lose a significant amount of battery charge overnight.
- You see msm_hsic_host wakelock (related to 3G radio) eating away most of your battery.
- You get less than 3 hours screen on time on a full charge.
- If you are rooted, install Xposed framework from here http://dl.xposed.info/latest.apk and reboot your device.
- After installing the app, enable the Intelli3G Xposed module and reboot
XDA support thread:
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
- Uses offline Google Maps: Once you have downloaded a region, you don't need internet connection.
- Ability to draw free lines (direct finger move) or straight lines.
- Ability to draw connected or separated segments.
- Can change map mode between Map/Satellite
- Have an UNDO and REDO functionalities.
- Can show the distance in international units (meters/Km), American units (feet/miles) or yards/miles.
- Can share or send the drawn route by mail in KML format.
- The application can be used in portrait/landscape mode.
- Shows your current location, allowing to know the distance between you and other places.
How to measure the distance/area?
1. Find the location on the map manually (by moving the map and zooming) or use the search option from the top menu. Search option allows you to just type the name of any city, street, landmark etc. in the world and it will be displayed in the center of the map.
2. Use the red marker form the top menu to add many markers on the map. They may represent your route in case of distance measurement or the boundary of your estate in case of area measurement.
3. The distance/area calculation result will be displayed in the left top corner of the screen.
1. If you press the Settings button you can customize the application behavior.
2. From the Settings menu you can change the type of measurement – area/distance.
3. You can change also the metric system: meters/miles.
4. You can change the map type: hybrid (satellite image with street names)/satellite/road.
5. Viewfinder can be turned on/off using the viewfinder button from the top menu.
6. You can move markers using your finger to adjust them to a specific position.
7. You can tap on each marker to see the details.
8. You can remove each marker in marker details window.
9. The last location search result will be displayed at the next application startup.
Moreover, it is in English, Spanish, French,... which will automatically be set in your smartphone.
- Searches places by keyboard and by voice.
- Allows to refine position by marker long press.
- Allows to show elevation profile.
- Loads and saves distances.
- Captures positions from other apps and calculates its distance.
- Shares distances with friends.
- Easy access to the dev team by email.
- Languages: English, Spanish, French, German, Italian, Portuguese and Catalonian.
(Google Play Services available needed)
Put as many markers on the map as you like. Choose between metric and imperial elevation units. Altitude is shown for every point. It is possible to save and load points. It is also possible to get your current location.
Internet connection is required.
Please report bugs if found. Improvement suggestions are welcomed.
Use this application only for informational purposes. Do not use it for making important decisions.
* 5km range
* ele. pts every 10m/100m horizontally
* directions rounded to 15° steps
* location updates every 1km/10min
* max. 500 elevation charts per day
Tap on-screen data to set direction manually.
Hold phone on flat surface and away from ferrous metal objects and electromagnetic fields.
Request new feature here:
Get huge games to external SD(micro SD) and work fine.
So you can easily move the game data files to external SD card and solve the problems that internal SD space is too small.It also applies to other games data to external SD, such as gun bros, Dungeon Defenders.
Users can customize the mounted folder in setting.Must wait for data loading is complete, and set the folder with the corresponding app.It can be used in exceptional folder or navigation, etc.
How to use and please Note:
Only root required.
1.For new user,using "move data" function move your game data to external SD.
(Android/data folder is moved to "external path/data" ,gameloft/games folder is moved to "external path/games",and Android/obb is moved to "external path/obb" folder in the SD card)
2.Run this program.It lists games and click 'open' to play.
3.For old version(v1.x.x). If you wanted see other games (not gameloft)
,press Menu->Click "Setting"->Check "/sdcard/Android"->back to list.
4.If you want to click the desktop icon to execute or update from PlayStore,You need to uncheck "unmount when leave" in app setting and click mount.
5.Press and hold can remove game item.
6.If you flashed new rom or updated and "GL to SD" didn't work,please clear the data of "GL to SD".
7.Note that this app is not compatible with other mount app or script, for this would interfere with each other and causing the unmount timeout.
Support Android 4.2 above from version 2
last old version
If you have any questions, email developer rather than to the star.
Problem about "mount /unmount timeout".
Just click twice.
If you use sony device,you need to flash remount-reboot fixer.
Feature for Pro users:
Add slots of "custom folder" to 100.
Mount at boot.
Check and delete duplicate files in internal memory.
Support for developer to modify and improve this app.
**Limited to the core of each phone set different, each phone have encountered can not guarantee normal operation.
If not executed, please return your phone's models and ROM versions, have the opportunity to add in the new version.
**When you want to connect to the computer as a USB hard drive, remember to unmount(or check auto unmount).
**If you are willing to translate into your native language, please send an email to the developer.
!!!! Only for Google Now Launcher and Trebuchet !!!!
I don't understand why Google wants me to have this omnipresent search bar on every home screen if there obviously is Google Now / Google Search embedded into the launcher if you go to the left page. So after some searching I found a way to hide it. But it will show again if you go to the left screen; no functionality is lost. Of course digging through the code I found some more things which are customizable :)
++ Features ++
- Google search bar / automatically show search bar on Google Now
- apps from the app drawer
- page indicator
- app dock / auto hide
- all apps button
- icon labels
Icon Pack Support [XGELS Premium*]
- supports any icon pack
- automatically applies new icon packs
- dynamic calendar icon (free: unthemed, paid*: themed by icon pack)
Notification Badges [XGELS Premium*]
- using MissedIt!
Gestures: [unlock all gestures with XGELS Premium*]
- swipe down left, middle, right
- swipe up left, middle, right
-> Gesture actions
- pull down notification bar
- pull down quicksettings panel
- open app drawer
- open last app from recents
- open android settings
- go to sleep
- toggle hide/show app dock
- launch an app
- app drawer
- app dock
- homescreen margins
- app drawer background
- folder colors (background, font, preview)
- text colors on homescreen and app drawer
- resize icons
- resize icon texts
- hide shadows
- hide clock on default homescreen
- open the app drawer when pressing the home button on default homescreen
- change the icon of the home button to an app drawer icon on default homescreen
- go to sleep when pressing back button on every screen or only on default homescreen
- change the icon of the back button to a power off button
- rotate launcher
- all widgets are fully resizeable
- set your own default homescreen
- lock desktop
- continuous scroll (experimental)
- overscroll left or right to open the app drawer
- overscroll in app drawer goes back to homescreen
- close app drawer after launching an app
- disable wallpaper scrolling
Backup/Restore: [requires XGELS Premium*]
- backup / restore homescreen layout (icon and folders)
* XGELS Premium can be purchased through an InApp-Purchase
**** DISCLAIMER: THIS APPLICATION WILL NOT ROOT THE DEVICE ****
*Feel free to email me with any questions. I always reply!*
The goal of this application is to provide even the newest Android user with a simple method to check their device for root (administrator/superuser) access.
This is a very simple application to notify the user whether or not they have properly setup root access.
This application will test the device for root access using a very simple, quick and reliable method. The su binary is the most common binary used on Android devices to grant and manage root access. Root Checker will check and verify that the su binary is located in a standard location on the device. Root Checker will also confirm the proper permissions and flags on the su binary in addition to testing that access is granted by the su binary.
Many times users experience issues along the path of installing, configuring and gaining root access. For some users the process can seem complex while for others the process can seem simple. Regardless of the user's technical skill set, Root Checker, will quickly and correctly verify whether or not root access is 100% functioning. The process of confirming root access is sometimes known by other terms such as, gaining superuser access or gaining administrator access. Root Checker covers all these terms as they relate to one core function, being able to execute commands with root access.
If the Superuser or SuperSU applications are installed and working properly, these applications will prompt the user to accept or deny the root access request from Root Checker. Accepting the request will allow Root Checker to check for root access. Denying the request will result in Root Checker reporting no root access.
Gaining root access varies based on manufacturer, model, and carrier. If you're searching for root access to your device, this application will not help you. If you're interested in rooting your device, please use http://www.google.com to find the appropriate rooting support areas for your specific device. Other popular web sites which provide rooting guides are http://forum.xda-developers.com and http://forum.sdx-developers.com.
Please don't leave negative feedback about a concern, bug or issue! Instead, please email me,with your feedback, suggestions and comments!
I do my best to assist as many people as possible and appreciate all the support that has made this application successful! Thank you!
- Detects if your phone has Root access
- Device and Android Version along with the API Level
- Displays SuperUser Version
- Displays BusyBox and Su Versions
- User and Group Id
- SuperUser Location
- Su and Sudo Location
- Environment Variables
- Displays Phone's Build Information
- Internet - Google Analytics/Send Feedback
- SuperUser - Check for Root access
Root Checker by Jared Burrows
Find me on Google+: https://plus.google.com/+JaredBurrows
Send all suggestions to firstname.lastname@example.org
Retailers, crooks, the government, and others shady individuals are tracking your movements. Even when your Wi-Fi is turned off, your phone may be broadcasting information to whomever is in range which can be used both to track repeated visits to as well as your exact movements in an area under surveillance.
It's not a big step to couple this to personal information - a retailer for example, could track your trip to the register and correlate with your payment information. Now the tracking hardware and software vendors, the store (or chain) owner, their business partners, they can now all track where you are every time you come into range of one of their systems, and fully profile who you are, what you do, your financials, and your daily patterns!
That is just one example, but there are many uses for tracking you. Make no mistake, this is happening in the real world today.
One solution is shutting off Wi-Fi completely (including the background network scanning, a setting most people don't know about), but you would lose benefits like automatically connecting to known Wi-Fi networks and improved location awareness for your apps. It also does nothing to help the situation for others.
Pry-Fi will prevent your device from announcing all the networks it knows to the outside world, but it will still allow background scanning and automatically connecting to Wi-Fi networks. While you are not connected to a Wi-Fi network, the MAC address will constantly be pseudo-randomized, following a pattern that still makes the trackers think you are a real person, but they will not encounter your MAC address again. This will slowly poison their tracking database with useless information.
When you do connect to a Wi-Fi network, unless you specify otherwise, your MAC address will also be randomized - the same MAC address will not be used the next time you connect to this or any other network.
Though of course the companies involved with these trackers claim they wouldn't use the data maliciously, the possibility is there, and we all know that if something can be abused, ultimately it will be. There do not appear to be any laws against these practices yet, nor is it likely Wi-Fi will be redesigned any time soon to get rid of the information leaks.
But we can make an effort to reduce the usefulness of the tracking data for the exploiters. Pry-Fi comes with a War mode, which when enabled tries to make your Android device appear like dozens of people. Just wandering around an area under Wi-Fi location surveillance for a few minutes can ruin the tracking data for the period of your stay.
Proof of Concept
This is proof-of-concept code, and how for it will go in the future depends on interest and how well it works. It has been tested on several devices and seems to work, but it is very young still. The magic the app does to achieve its purpose is ever subject to changing Android security policies and OEM customizations, so even though it works now, there really is no saying if it will still be possible in future firmwares.
Of course you should also keep in mind that tracking can be done in many ways, and these W-Fi signals are far from the only method in use.
Further details, device compatibility information, FAQ, discussion, etc is all available on XDA-Developers.com here:
You can also calculate distances of the routes through the marker.
Route can be selected on foot and by car.
Unit that can be displayed, meter, kilo meter, mile, yard, feet.
You can see the point of latitude, longitude, altitude and the address.
If the satellite map mode, it is also possible to measure distances on the golf course.
This needs network connections.
Create the path by tapping the map. Different modes of path creating are available: direct, driving, walking and bicycling. Direct mode draws straight lines between points. Driving, walking and bicycling modes are able to find and follow roads between points. Driving mode finds routes using the roads network. Walking mode uses pedestrian paths and sidewalks (where available). Bicycle mode uses bicycle tracks and preferred streets (this is currently available only in US). In pathfinder mode (driving, walking, bicycling) it is possible to add up to seven points. Every point shows altitude in preferred unit. Distance between first and last point is shown on the top of the screen.
Get the elevation profile chart of the path or the track by pressing the button 'Profile'.
It is possible to get your current location. It is also possible to save and load routes.
Ideal for hikers and bikers to assess the level of difficulty of the terrain before actually going out. Internet access is required. Choose between metric and imperial distance units.
For feedback and support send email to email@example.com
Please report bugs if found. Improvement suggestions are welcomed.
Use this application only for informational purposes. Do not use it for making important decisions.
Genius Alert reminds you to buy bread when you're close to the store or to do
best wishes to a friend when you meet him. And each alarm may also have more that
only one associated event. Using Genius Alert, you can create notifications in a very simple, and you will be notified only at the exact moment you need it.
Genius Alert allows you to easily manage your favorite events (dates, places and
people). For places for example you can capture the current position or search for an address on the map.
If it is not enough, with the Pro version, you can use the events for automatically activate and deactivate an alarm thus allowing the creation of unlimited combinations of notification.
No reminder app is so simple and complete, try Genius Alert!
If you like or you have some advice write on the forum: