There are several things you need to know and get ready before using this application:
1. Your device had root
2. Your need turn on your device's WiFi and connect to your wireless AP
PPPoE for Android let you establish a PPPoE connection directly from your phone in a very simple way. It's useful for those people who haven't got a router and who need to login to connect to Internet.
HOW TO USE IT:
Connect to your wireless network, then just go to preferences, insert your username and password and then tap "connect". You'll be online in a few seconds.
Please contact me via e-mail if this app doesn't work for you!
NOTE for Galaxy S3 users: this app needs an additional driver to work on Galaxy S3, go to http://deserteagle-blog.blogspot.it/ for the how-to!
This app uses rp-pppoe 3.10 (source from here:http://www.roaringpenguin.com/products/pppoe ) and pppd 2.4.5 (http://ppp.samba.org )
Never lose your wifi password again
this app only works for default password in some modems.
this is not for hacking wifi free networks, neither for free wifi, its for recovery purposes.
support next networks
WLAN_XXXX, JAZZTEL_XXXX, WLAN_6X, YaCom_6X,Megared-XXXX, AXTEL-XXXX,, InterCable6X, InterCableXXXX, INFINITUM6X, INFINITUMXXXX, MAXCOMXXXX, mega cable
do not use in wrong way, the app can change your wifi settings.
This app can turn on your wifi
this app its like wifi hacker prank, or wifi hack joke, but functional.
you can configure, and of course connect your PLANEX wireless from your Android devices with using this app!
this app will do the confusing part.
all you need to do is to follow the instruction in the screen.
This app supports the following models of PLANEX.
Enjoy your WiFi!
-- touch 2 go --
1. Signal strengh
2. Channel number
3. Security type
4. Link speed
5. Hardware vendor
6. IP number, and etc.
You can see which one is good and bad intuitively, and it is very easy to use.
Also, this application provides "Query nearby network devices" feature.
It scans all connected devices to your AP.
WiFi Picker also supports notification feature with various network information.
(Link speed, IP etc)
Wifi Inspector is a simple tool to see all the devices connected to our network (both wired and wifi, whether consoles, TVs, pcs, tablets, phones etc ...), giving relevant data such as IP address, manufacturer, device name and MacAddress.
Wifi Inspector also allows to save a list of known devices with custom name and find intruders in less than 30 seconds. This makes it easier for us and you will not need to go checking the data whenever we make a scan.
All this in a clear and simple design that allows us to see that our personal data are safe in a few seconds.
No doubt, Wifi Inspector ALWAYS find ALL connected devices!! More than 230,000 active installations demonstrate their reliability!!
We continue working to improve Wifi Inspector and we greatly appreciate that you share your opinions whether positive or negative. We have almost no reports of problems in the poor ratings (only one star with no comment) This makes difficult that we can improve the application. Please if you have any problems / suggestions do not hesitate to send it to us, in your comment or with email, and we will try to fix it.
For a better experience we recommend Android 4.0 or more
Ensure SD card installed. The application need SD card to install a 66Mb Dictionary, which is smaller and more efficient than anything else available on the market. This file should be downloaded by default to your SD card, though you can select the folder where the file is on the preferences menu. Alternatively we can use your Internet connection instead of the dictionary. This option can be activated in the settings menu. It also can calculate natively the key although it will take about 2 minutes in less powerfully phones and about 10 seconds on a Samsung Galaxy S. This tool also detects the new 2010 Thomson routers for which keys cannot yet be generated.
1. Thomson based routers (Include Thomson, Speed Touch, Orange, Infinitum, BBox, DMax, BigPond, O2Wireless, Otenet, Cyta , TN_private, Blink )
2. DLink ( Only some models )
3. Pirelli Discus
5. Verizon FiOS ( Only some routers supported)
6. Alice AGPF
7. FASTWEB Pirelli and Telsey
8. Huawei (Some Infinitum XXXX)
9. Wlan_XXXX or Jazztel_XXXX
10. Wlan_XX ( Only some are supported)
11. Ono ( P1XXXXXX0000X )
12. WlanXXXXXX, YacomXXXXXX and WifiXXXXXX
13. Sky V1 routers
14. Clubinternet.box v1 and v2 ( TECOM-AH4XXXX )
18. EasyBox, Arcor and Vodafone
19. PBS (Austria)
23. Axtel, Axtel-xtremo
26. Cabovisao Sagem
27. Alice in Germany (new)
28. Speedport (new)
Help us with the translation project on http://crowdin.net/project/wifi-connection-manager
NOTE: According to the change of Google Play Mobile Ads policy, devices before Android 2.3 are no longer be supported.
Legacy devices can download the app from: http://www.roamingsoft.com/android/WifiManagerLegacy.apk
1. Support AP (Access Points) SSID with special characters, such as Chinese, Japanese, Korean, Greeks, Russian, Arabic, Portuguese, UNICODE and so on.
2. Display saved network password. (require device to be rooted)
3. Fix device Wi-Fi problems.
4. Instant connect. Once searched, once start connecting. Way faster than the system build-in Wi-Fi scanner.
5. Static IP settings support. Auto switch between different AP.
6. Switch between available networks, solving the network conflict problem.
7. Add/Connect to certain hidden SSID network (depends on device and network conditions).
8. Manual add network, with special support for EAP/LEAP encrypted network.
9. Pause scan, convenient to browse many results.
10. More detail network information, network bandwidth, channel and network type.
11. Auto detect Web Authentication.
12. Backup/Restore saved networks.
13. Add/Share Wi-Fi network with QR code.
14. Arrange network connecting priority.
15. WPS (Wi-Fi Protected Setup) support for Android 4.0 or above devices.
16. Automatical switch between saved networks when signal is not ideal.
17. Wi-Fi tether (Wi-Fi Hotspot) support.
About the required permissions:
Camera is for adding Wi-Fi network via QR code.
Phone and Internet is for the AdMob plug-in made by Google.
Storage is for backup and restore saved network.
WiFi Overview 360 is not only a WLAN Scanner, which shows all WLANs in range, the app is much more.
This app is a "Swiss Army Knife" for WLAN.
With this tool you can manage and optimize your used wireless network and and with one look you'll get detailed information of the WLANs (WLAN name (SSID), signal strength, channelnumber, encryptionin - open or not) in your environment.
The tab "Ch check" (channel checker) and "Ch. radar" (channel radar) are powerful tool to optimize your own wlan network. For best performance your network must use a channel or frequency range where are no other wireless networks or little as possible. WiFi Overview 360 gives you the best choice for the channel.
Main features are:
- wlan scanner
- detailed wlan information
- add WLANs manually
- endless list of known WLANs (previously limited to 16)
- graphical representation of all wireless networks in the operating range
- channel checker for the best channel choice
- included 2x1 widget
- Android 4.x support
- Tablet support
- WLAN Internet connection check
- and much more ...
The "Pro" version contains no ad, have more widgets, have a powerful "WiFi Detector", can set "Quick connect shortcuts", can set WLAN priority and is a little recognition for my work.
Networks are sorted alphabetically and you can easily copy the password to your phone's clipboard.
This application will only work on ROOTED phones.
For a full explanation of why SkipLock was created, see this blog post: http://benhirashima.com/posts/the-rebirth-of-unlock-with-wifi/
This app is NOT the unlock key for SkipLock. Do not buy this app if you want to use SkipLock.
Tired of entering your password every time you turn on your phone? Unlock With WiFi™ unlocks your phone when you're connected to your home WiFi network. When you're at home, or work, you don't need to worry about losing your phone, so why should you have to enter your password?
Unlock With WiFi is the leading password convenience app on the market. It's focus is on reliability, quality, and a great user experience. The setup wizard makes it easy to setup, and helpful dialogs are displayed if something isn't quite right.
How it works:
When you get home and connect to your WiFi network, your device will unlock. Then when you leave, and the WiFi disconnects, the device will lock again. You have to enter your password the first time after you connect to your WiFi network. This is so that if someone steals or finds your phone, they can't just bring it to your house to unlock it. After you enter your password once while connected to your WiFi network, you won't have to enter it again until you leave/disconnect. This is great for SMS texting!
You can also set a lock delay, for when you're not at home. The default delay is set to 5 seconds (you can adjust it), so when you turn the screen off, the device won't lock until 5 seconds have passed. That way, if you remember something you forgot to do, you can turn it back on without entering your password. This feature is considered experimental at this time. It works on most devices, but isn't guaranteed to work on all devices.
There are also battery saving options to:
Turn off WiFi when you leave home
Turn on Bluetooth when you leave home
Turn off Bluetooth when you get home
Turn off Auto Sync when you leave home
Turn on Auto Sync when you get home
If you have trouble with this app, please email me. Send an email with Unlock With WiFi in the subject to email@example.com. If it doesn't have Unlock With WiFi in the subject, it will be filtered as spam.
IMPORTANT: To uninstall this app, you must select Uninstall from the menu inside the app. The normal way won't work if device admin mode is enabled.
WARNING: This app doesn't work on some phones. Please read this description carefully, and the FAQ. http://benhirashima.com/unlockwithwifi/faq
Does not work on Android 5+. However, Android 5.0 has much of SkipLock's functionality built in now.
The app is not compatible with Motorola Skip or Dots.
Do not install this app on the SD card. It will not be secure if you do.
It won't work on phones that have full device encryption enabled.
It won't work if your employer enforces a password policy on your phone. Some corporate Exchange email users have this.
Only PINs and passwords can be used in Android 4.0 and above. Patterns and face unlock are not supported.
Unlock With WiFi is incompatible with some antivirus and battery saver apps. See the FAQ for details.
Make sure to exclude Unlock With WiFi from your task killer apps, or it won't work properly.
See the FAQ for more details http://benhirashima.com/unlockwithwifi/faq
Tech support is only available in English.
By downloading this software, you are agreeing to the End User License Agreement, which can be read here: http://benhirashima.com/unlockwithwifi/eula.
If you are not located inside Greece you can still try your luck with this app but don't be mad if it doesn't work at all in your territory. In case you manage to connect to a network othen than yours you have to inform the owner so that he/she change password.
~ I DO NOT OWN ANY RESPONSIBILITY OF HOW THIS APP MAY BE USED ~
~ THIS IS AN AD SUPPORTED APPLICATION ~
Based on your location, Wifi free offers you nearby wifi hotspot password within 5 kilometers.
-Easy to find
You can take the initiative to find the wifi hotspot you are interested in area such as cafe, hotel, city, country.
All wifi passwords are shared by users, and the availability will be automatically detected by WiFi Free.
-Around the world
Now available wifi password over ten million, all over the world, including the USA, Canada, Mexico, Brazil, America, Europe, Asia, Russian and all former USSR Countries, Middle East, Oceania and other countries and regions.
Using the reminder function for a wifi hotspot, WiFi Free will remind you, when the wifi hotspot is available.
WiFi Free will never initiatively record any wifi hotspot information on your phone unless you initiatively share a wifi hotspot.
* Upload or download multiple files at once.
* Delete, rename, copy, zip or unzip files using the Windows File Explorer.
* Runs as a background service.
Only simple steps:
* Ensure your phone and computer connect in the same WiFi network;
* Start WiFi File Transfer by turn on the button;
* Copy and paste the URL noticed into your FTP Client or Windows file explorer, then you scan and manager files in your Phone on your computer.
Tags: file explorer, ftp server
With this app you'll can connect to WiFi networks which have WPS protocol enabled. This feature was only available in version 4.1.2 of Android.
App developed with educational purposes. I am not responsible for any misuse.
WPS Connect is focused on verifying if your router is vulnerable to a default PIN. Many routers that companies install own vulnerabilities in this aspect. With this application you can check if your router is vulnerable or not and act accordingly.
Includes default PINs, as well as algorithms such Zhao Chesung (ComputePIN) or Stefan Viehböck (easyboxPIN).
- LG G2
- Nexus 5
- Samsung Galaxy S3
Prior to an assessment, understand that it serves the application.
Literally any OS is supported: Windows, Mac and Linux.
Scanned barcodes will be sent to your computer using the common VNC protocol.
Download and install any VNC server on your computer. For example: UltraVNC, RealVNC or TightVNC.
You just need to install the server part (silent server) and register as a system service.
Set your VNC Password.
If you are running VNC only to serve WiFi Barcode Scanner you might want to disable "Remove Aero (Vista)", "Remove Wallpapers for Windows" and enable "Capture Alpha-Blending" to prevent blinking of screen when connecting to the server.
Open a terminal and enter the following command: gsettings set org.gnome.Vino require-encryption false
For other Linux:
Install and configure your prefered VNC server like x11vnc or tightvncserver.
For Mac OS X:
Open a terminal and enter the following command before enabling screen sharing: sudo defaults write /Library/Preferences/com.apple.RemoteManagement VNCAlwaysStartOnConsole -bool true
Open "System preferences" - "Sharing".
Check pane "Screen sharing".
Click "Computer Settings..." and set your password.
On your phone:
Set your vnc server host and port using settings menu.
If you choose to automatically connect just press "Start scanning" button. Otherwise first press "Connect" button to connect to your vnc server.
Every scanned barcode will be sent to your vnc server immediately.
- Make sure VNC is installed correctly and no firewall is blocking connection requests on port 5900. If you used the installer there should be already a Windows firewall rule.
- Check if VNC can be reached by your phone. PC and phone must be on the same network. Otherwise you have to add port forwarding rules to your router.
- Make sure you did not enable "Disable Viewers inputs" in your VNC servcer configuration.
- If you still have any problems do not hesitate to contact us at firstname.lastname@example.org
How to check ip addresses:
- PC: hover the mouse over VNC tray icon and your PC ip address will be shown in a tooltip.
- Phone: Settings -> Wireless & networks -> Wi-Fi Settings -> your connection will be listed under Wi-Fi networks
You can enable offline mode to scan barcodes to a database and send them later.
Just don't connect to the vnc server and start scanning.
Later you can send the scanned barcodes using the History menu option.
Using special keys for prepend/append string:
You can use a html-like encoding to send special keys. Use 'ꯍ' where abcd is a hex string representing a special key. For all available keys please see X11/keysymdef.h or contact email@example.com
To add a profile from QR-Code scan "wifibarcodescanner://PASSWORD@HOST:PORT/PROFILENAME". Every part except host can be ommited (eg. wifibarcodescanner://192.168.0.10).
You can add widgets to your home screen to load profiles. If "Automatic Connect" is enabled scanning will start automatically when the widget is selected.
For scanning barcodes the free ZXing Barcode Scanner App is needed. If not already installed you will be redirected to download on first usage.
v1.0.1: Minor UI changes.
v1.0.2: Minor bug fix.
v1.0.3: Preferences: Send Newline or Tabulator after barcode.
v1.0.4: Internal refactorings.
v1.0.5: Delayed sending of newline or tabulator.
v1.0.6: Warning for ZXing Barcode Scanner 3.7.
v1.0.7: Better integration of ZXing Barcode Scanner.
v1.0.8: Prepend/append characters to barcode.
v1.0.9: Sending of special keys from prepend/append string.
v1.0.10: Special keys for key down/up.
v1.0.11: Scan single barcode. Display last scanned barcode.
v1.0.12: Problem with scan single barcode and send after barcode fixed.
v1.1.1: Handling of wifibarcodescanner:// improved.
v1.1.2: Widget to load profile.
v1.2.1: Offline mode.
v1.2.2: Remove leading and trailing characters.