Wall angle: Use an angle finder on the wall to find out the exact angle required for the cut.
Spring angle: Spring angles ( tilt at which the crown sits on the wall ) is usually 38, 45, 52 degrees.
Translate the results to your miter saw.
Happy cutting and remember to cut safely!
Email me with any questions/ suggestions
For Do-It-Yourselfers and Professionals alike, this Crown Molding app calculates the miter and bevel angles to use with a miter saw when cutting crown molding for installation.
Crown Molding supports both horizontal corners (for typical flat ceilings and mantels, etc) and vertical corners as required for cathedral or vaulted ceilings.
Easy-to-understand illustrations are displayed to assist with placing the piece of crown molding on the saw for the perfect cut.
No more guessing or wasted material. Cut it right the first time!
Simple Crown Molding Angle Calculator
This is a very simple app to calculate the Miter and Bevel angle on your miter saw to perfectly cut crown molding.
Enter the wall angle and the crown molding angle (spring angle) and the app will give you the miter and bevel angle for your chop saw.
Result: a perfect cut every time.
角度 - 三角 - 三角関数sin、cosと日焼け - 反対側 - 隣接側 - 斜辺 - 正弦、余弦、正接関数 - 数学ヘルプ - ピタゴラスの定理
Ideal for Engineers, Designers, Excavators, Highway and Heavy Construction
• Work directly in and convert between all building dimensional formats: yards, feet-inch-fractions, inch fraction, decimal feet (10ths, 100ths), decimal inches and metric (m, cm, mm)
• Easily calculate areas, volumes and weight per volume, and truck loads in imperial/metric
• Quickly calculate square-ups, right angles
• Simplify and speed up grid-cell and cut/fill estimates
• Created by Calculated Industries, the originator of the award-winning Construction Master® calculators
• Built-in calculator help – just press and hold the desired key for full, clear definitions, explanations and examples of keystrokes
Dimensional Math and Conversions Including Metric
• Metric (m, cm, mm)
• Decimal Feet (10ths, 100ths), Decimal Inches
• D.M.S. to Decimal Degree Conversions.
Dedicated Functions and Keys Help You Calculate
• Instant Square-up and Drop
• Number of Loads: calculate Load volume, number of Loads, Load size
• Cut/Fill estimates – proposed and existing
• Shrink and Swell calculations using Compacted, Bank and Loose volumes
• Calculate Percent Grade and Slope
Built-in Area and Volume Solutions
• Length, Width, Height (Depth) keys
• Square and Cubic formats
• Instant Weight per Volume
• Pounds, Tons, Kilograms or Metric Tons
• Entry Editing Backspace Key – with a swipe of a finger
• Haptic Feedback (optional)
• Cost per Unit: Solve unit cost and pricing
• Paperless Tape
• 4 Memories
• User-Definable Preferences
For: Engineers, Designers, Excavators, Highway and Heavy Construction
But also recommended for mechanics, programmers, and especially for teaching mathematics.
With this application you use trigonometry to calculate all sizes of any right angle triangle, by simply entering two known values.
With only 3 clicks, you calculate all the required quantities! Saves a lot of time in the calculation!
NOW you can display the approach!!!!!!
right angle triangle calculator, pythagoras
Geoprops is a calculator of geometric properties for various section types. It mainly addresses Civil / Structural Engineers, but can be used by any Student who needs to calculate the area and the geometric center of a shape. It allows the user to calculate various geometric and mechanical properties like area, centroid, moment of inertia, and many others for an exhaustive library of predefined sections, as well as custom shapes defined through their nodes. Special features enable the user to change the origin and the orientation of the coordinate axis, making it easy to calculate the properties of the section relative to any reference system. The user can also set the number of decimals for the results, as well as the units to be used. Different units may be used for the inputs and for the results. The calculation summary can by sent by mail or Google Drive.
Keywords: Engineering, structural engineering, civil engineering, area, perimeter, centroid, moment of inertia, radius of gyration, section modulus, steel sections.
The following sections are currently available:
- custom (the user can enter a section through its nodes)
- triangle (full and hollow);
- circle (full and hollow);
- rectangle (full and hollow);
- trapeze (full and hollow);
- rounded rectangle (full and hollow);
- ellipse (full and hollow);
- regular polygon (full and hollow);
- star (full and hollow);
- circle sector;
- circle segment;
- L profile;
- C profile;
- Z profile;
- I profile;
- T profile;
Other sections may be added upon user request.
The following outputs are available:
A – area;
P – perimeter;
P0 – inner perimeter, for hollow sections;
xg, yg – coordinates of the centroid;
Ixx, Iyy – moments of inertia about X and respectively Y axis;
Izz – polar moment of inertia;
Ixy – product of inertia;
I1, I2 – principal moments of inertia about centroid;
theta – angle of the principal axis of inertia;
rx, ry – radius of gyration about X and respectively Y axis;
wx, wy – section modulus about X and respectively Y axis.
Visit http://www.facebook.com/geoprops to stay updated about future promotions.
Enter the known values of the triangle to be calculated. Angles are expected in degrees. The result is automatically calculated when enough parameters have been entered.
white : Correct input or valid solution
yellow : missing parameters
red : no solution possible
In the ambiguous case, both solutions are shown.
* In a review, it is ★4.5.
* A professional also uses at work.
・Simple measurement of an angle and a slope can be performed.
・An angle is spoken. It is helpful by adjustment work.
・If a calibration is carried out, accuracy will become good more.
・The digital display of an angle and a slope rotates so that it may be easy to be visible in accordance with inclination.
And the number of meter direction, pitch (the slope of the front and rear), roll (the slope of the left and right) are displayed in the camera's image synthesis.
Is useful because it can be measured while viewing the camera images, the subject.
When you use the measurement mode, you can measure the difference of B from A target subject.
With this feature, the angle of the object in the distance measurement is possible.
Useful when reading the numbers, has a pause function.
As it is, you can save as (JPEG) images from the camera photo.
To imprint information to a photo, you can select individual.
If there is a zoom function on the terminal, you can also zoom.
There is also a Piipass Plus (pay) can also record location information by GPS.
Support for more devices and additional sensor filters coming soon! Support the developer and buy Angle Finder Pro!
From the reviews and responses from users it looks like for the devices it works on, people love it! If AngleFinder doesn't work on your device, please contact me with your hardware information. I am working to add more devices as I get my hands on the hardware necessary to test on.
- Make your furniture without professional knowledge ?
- Quickly create cutting a piece of furniture ?
- Find out how much material you need , and to estimate the approximate cost ?
- Have all the necessary information at your fingertips on your phone or tablet ?
Then this app will help you.
Simple and easy application to create standard elements of furniture , such as kitchen on the individual sizes .
Now available :
- Frames cabinets coupe
- 4re type cabinets
- Pedestals with plinth
- Ordinary table
- Computer table
Suitable for beginners and home furniture masters craftsmen.
Choose the type of furniture , then enter the overall dimensions , detailing the program will calculate itself .
- Calculation of the amount of materials .
- Length of edge area chipboard, fiberboard .
- Ability to export to csv or mailing
More from developer
The app's main screen uses a left swipe motion to display all of the different calculators.
See my Roof Framing Geometry Blog for A Complete list of the 39+ calculators in Rafter Tools for Android.
Current version 2.62 functions supported:
Irregular Hip Rafter function With UnEqual Overhang
Irregular Hip Rafter function With Equal Overhang
Hexagon Rafter Angles & Lengths
Octagon Rafter Angles & Lengths
Dodecagon Rafter Angles & Lengths
Polygon Rafter Angles & Lengths
Octagon Roof Framing 4 Butt Hip Rafter Method
Octagon Roof Framing 4 Butt Hip Rafter Method with Purlin Structural Ring
Octagon Roof Framing With Hip Rafters Mitered
Octagon Roof Framing with Gazebo Cupola
Bay Window Roof Rafters
California Bay Window Hip Rafters
Frieze Block Miter Angles
Purlin Rafter Angles
Square Tail Fascia Angles
Timber Framing Angles
Standard Rake Walls
Hip Rake Walls Plan A Rotated into Roof Surface Plane
Hip Rake Walls Plan B Rotated into Roof Surface Plane
Hip Rake Walls Plan C Rotated into Roof Surface Plane
Carpentry Certification in roof framing Trigonometry and Geometry.
Tetrahedron Angles Calculator and Tetrahedron Framing Square Usage
French Compagnon Roof Framing Kernel Angles and Framing Square Usage to geometrically draw out a bastard hip using a framing square.
Dihedral Angle Calculator
Crown Molding Miter and Bevel Angles Calculator for Compound Miter Saw Settings and Rake Crown Molding Miter and Bevel Angles,Polygon Crown Molding Miter and Bevel Angles, Radius Bullnose Crown Molding Miter and Bevel Angles and width, Horizontal to Rake Crown Molding Miter and Bevel Angles .
Unequal Pitched Gable Rafters with Unequal Plate Heights
Jack Rafter Plumb Layout Marks on Hip Rafter
Alhambra Granada Ad Quadratum Ground Plan Roof Rafters
Hip/ Valley Rafter Roof Angles for equal and unequal roof pitches for any plan angle
Hip Rafter Backing Angles
Hip Rafter Plumb Backing Angle
Hip Rafter Side Cut Angles Peak of Hip Rafter
Hip Rafter Side Cut Angles Foot of Hip Rafter
Jack Rafter Side Cut Angles
Roof Sheathing Angles
Hip Rafter Purlin Housing Angles
Hip Rafter Diamond Post Miter & Saw Blade Bevel Angles
Plywood Roof Sheathing Offset Cut Line
Valley Sleeper Miter & Saw Blade Bevel Angles
Dormer Square Tail Miter & Saw Blade Bevel Angles
Purlin Layover cut perpendicular to roof surface plane
Lofting -- Plotting Ellipses for Arches or Groin Vaults
Groin Vault Plotting -- Lofting Equal Height Ordinates
Clipped Hip Rafter Octagon Roof Framing
Prow Rafter Roof Framing Angles
Law of Sines Formulas Reference Sheet
Pyramid Hip Roof Framing for Bastard Hip Roofs
CutIn Dormer Shed Roof Rafter Calculator
Pitch Break Shed Roof Rafter Calculator
Dormer Shed Roof Rafter Calculator
dévers de pas angles for WorldSkills Carpentry Competition
Spiral - Helical Stairs
Tangent Hand Railing
Gambrel Roof with Crow's Beak
Trapezoid With Unequal Overhang
Trapezoid With Equal Overhang
Barrel Roof Dormer
Eyebrow Roof Dormer
User input modes
Display output modes
Display and input modes can be completely different.
The app's main screen uses a left swipe motion to display all of the different calculators.
All bevel angles are referenced from the traditional layout methods used by the French and Germans carpenters. Use with the French Rabattement de Surface method (folding roof surface) or the German Flachenklappung method. Basiswissen Schiften or Charpente Les Traces. Use with Traité Théorique et Pratique de Charpente by Louis Mazerolle or Handbuch der Schiftungen by Manfred Euchner or Draw Down Technique --> Abklappung
Jack Rafter Plumb To Earth Perpendicular To Plate Line Bevel Angles, with claw angle.
Jack Rafter Plumb To Earth Offset/Skewed From Plate Line Bevel Angles.
Jack Rafter Plumb To Roof Surface Offset/Skewed From Plate Line Bevel Angles, with claw angle.
Rafter Plumb To Earth Offset/Skewed From Plate Line Bevel Angles.
Crossing Jack Rafters Plumb To Roof Surface Bevel Angles, with claw angle.
Saint Andre Cross Rafters Plumb To Roof Surface Bevel Angles, with claw angle.
Purlin Rafter Plumb To Roof Surface Bevel Angles, with claw angle.
Witches Cut on Hip Rafter with Square Tail Rafters
Hip Rafter Edge Bevel Angles, Backing Angles
Devers De Pas for Rafters Plumb To Roof Surface and Offset/Skewed From Plate Line
Traditional French and German Roof Framing Geometry Layout Books
Developing a construction plan in which each piece of wood can be found in its true shape for
Oblique rafters, Slanted Rafters, Skewed Rafters, Canted Rafters
Google Sketchup Model of Traditional Roof Framing Geometry Layout Techniques 1