This is not a widget, and thus can be used from inside Google's Car Home.
To add to Car Home, click on an empty button in Car Home, select "Other application", and than select the Bluetooth Toggle app from the list.
Please make sure that you are using the latest version of Google's "Car Home".
The widget will show the name of your WiFi router (SSID) including the connection status of your WiFi and the link speed.
When the bottom edge colour of the widget shows:
RED - It means that your WiFi is switched OFF (WiFi mode disabled on your phone)
BLUE - It means that it's switched ON (this state could either mean "ON and connected" to a hotspot OR "ON and waiting" for a connection).
WHAT YOU NEED TO DO AFTER YOU'VE INSTALLED IT:
Please note that this is a widget and NOT an application, so you will not see it listed on your application list (app drawer).
After you have installed this widget from the Google Play store, you will need to navigate to your widget list in order to place it on your home screen.
HOW TO USE THE WIDGET:
To turn the WiFi on/off - Press on the circular section of the widget (on the LEFT half , where the signal strength graphic is shown)
To quickly navigate to the phone's WiFi menu (to see a list of WiFi hotspots) - Press anywhere on the text located on the RIGHT half.
As you can expect, we cannot test this widget on every available Android phone out in the market, so we can guarantee normal functionality only on the devices listed below mostly running on Gingerbread and JellyBean versions. Please do feel free to try this on other devices and give us your feedback if you have any issue so it will help us improve this further and support more devices.
Google Galaxy Nexus
Google Nexus 10
Google Nexus 4
Google Nexus 7
Google Nexus One
Google Nexus S
HTC Desire S
Huawei MediaPad 10FHD
Samsung Galaxy Note 10.1
Samsung Galaxy S2
Samsung Galaxy S3
Samsung Galaxy S4
Samsung Galaxy Tab
Sharp AQUOS SH80F
Sharp AQUOS Zeta
Sony Xperia Z
If you experience problems with this widget on devices not listed above, then please give us a chance to fix the issue first by emailing us, instead of giving us a bad review.
Show device name, mac address, power signal dBm.
Includes simple widget for home screen. Add it by long press on the desktop screen.
-tap on bottom - turning on / turning off
-tap on top - opens scanner.
Start App, turn on GPS, check accuracy open maps over the shortcut button.
- Data for GPS:
- GPS Accuracy
- GPS height (not above sea level)
- top speed
- Number of satellites when available
- displays satellite locations
- Data for wireless networks (cellular networks and WLAN)
The app is funded by advertising.
A version without advertisement is available in the market.
Tags: GPS Widgets GPS Widget gps Accuracy GPS satellites
Provides set of switchers:
- Ringer mode
- BlueTooth (2.0+)
- Airplane mode
and shortcuts to system settings menu:
- Wireless Settings
- GPS Settings
* Automatically turn on Bluetooth when on a call.
* Automatically turn on Bluetooth when the phone is charging.
Keywords: bluetooth bt mobile data 2g 3g 4g lte cdma
This app is licensed under the MIT license.
Copyright (C) 2012 Futon Redemption
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
States of the app:
Icon with tamed WiFi on (WiFi is turning on)
Icon with bright WiFi on (WiFi is on)
Icon with tamed WiFi off (WiFi is turning off)
Icon with bright WiFi off (WiFi is off)
How to add widget "WiFi OnOff Toggle Widget" onto your phone's screen:
1. Go to your Home Screen.
2. Long click on empty space on Home Screen.
3. Select "Widgets" from the list.
4. Find widget "WiFi OnOff Toggle Widget".
You have an idea on how to improve "WiFi OnOff Toggle Widget", add a comment below.
• option turn off the Bluetooth adapter when device is reboot;
• option switch types: one button or three (with buttons settings);
• ability to change the border color of the widget (for Android 2.2 and above);
• start scan for Bluetooth devices;
• ability to change the horizontal size (for Android 3.1 and above).
With the widget you can assign one or more screens on your home launcher to be dedicated for usage inside the car.
Unlike Car Home applications, you still will have access to all other screens of your home launcher.
To access widget settings use application shortcut.
HOW TO USE
On any home screen press "menu", then "add", select "widgets" and choose "Car Widget" from the list of available widgets.
You might need to restart the device in order to widget to appear in the list.
* 4x4 widget
* 4,6 or 8 big shortcuts per widget
* 5 Skins
* Customization options: background color, opacity, font size and color, icons tint
* Replacement for "Car Dock" / "Car Home" applications.
* Custom icons and titles for shortcuts
* Icon pack support
Available shortcuts (can be expanded by installed applications):
* Direct dial/ message
* Directions & Navigation (Using Google Maps)
* Gmail label
* Music playlist
* Built-In Shortcuts - (InCar switch, Play/Pause, Next, Previous - Experimental)
Free version includes Trial of the features available in the Car Widget Pro.
Car Widget Pro features:
Automation for your car. Detects when you inside the car and adjusts settings of your phone.
Trigger (possible to combine all of the options):
* Power cable connected
* Headphones connected
* Bluetooth device connected
* Activity recognition
* Turn on Bluetooth
* Disable screen timeout
* Adjust screen brightness
* Adjust volume level of media
* Switch off Wi-Fi
* Route call to speaker
* Auto answer (Experimental)
* Autorun App
* Shortcuts in notification bar (Android 4.0)
- It's not possible to unlock the screen from widget
- It's not possible to switch to the specific screen from widget
- Not possible to switch GPS
CALL_PHONE (Directly call phone numbers)- used for direct call shortcut
WAKE_LOCK (Prevent phone from sleeping) - used to disable screen timeout
WRITE_SETTINGS (Modify system settings)- used to adjust brightness settings
ACCESS_WIFI_STATE and CHANGE_WIFI_STATE - connect and disconnect from Wi-Fi
BLUETOOTH and BLUETOOTH_ADMIN - required in order to switch Bluetooth state
(Modify or delete the contents of your USB storage) - Backup/Restore functionality
* On some devices you have option "Stay awake" (Under Settings -> Applications -> Development), you can enable it if your want to prevent phone from sleeping.
* Landscape mode: Not all launchers allow to use phone in landscape mode, just replace yours with alternative one that supports it (like LauncherPro or ADW).
You can find Car Widget Pro also in androidpit.com market.
(This marketplace has an option for PayPal)
Please exercise caution when using this application and do not manipulate your device while driving. Always pay attention to the road.
From OFF to ON. When Bluetooth is OFF.
From ON to OFF. When Bluetooth is ON.
This application is very effective when used with "iKey"(360智键,米键)
"ON/OFF Switcher" is about...
・This app is very simple and easy.
・Not have operation screen and setting.
・This app icon is very simple.
・This app isn't widget, but work like widget.
・Because it isn't widget, doesn't always reside.
・Can be changed to your favorite icon.(Use the icon change app.)
・APK size is very small !
Copyright(C) 2013 takash1 t0m0be All rights reserved
If you have a tablet in your car using the power cable and use it as a GPS or listen to music, well …then you have a problem! You must each time manually switch off-on your android.
Autosleeper does that for you now! Each time you switch off your cars’ engine your android goes automatically to sleep within seconds.
When you turn the car’s engine on again & and power supply starts, your android wakes up on its own and continues exactly where you left it.
Isn't that what you were looking for, to turn your tablet into an advanced navigator system?
Now you have it!
It’s FREE, designed by the Supercoders.org, the global community of developers who make our lives easier.
AUTO POWER ON OFF FOR YOUR TABLET AND YOUR SMARTPHONE!
Autosleeper is a new, FREE Auto- Power freeware that transforms your cars’ tablet into a car navigator.
Get ready to forget about the Power Button only with Autosleeper, the amazing FREE auto- power APP!
What it is: this FREE & useful Android tool makes your car’s tablet go to Stand By Mode automatically when you turn off the car engine and On again when you are back! No looking for the Power Button, whatsoever, any more!
Off Mode or Stand By? You decide the Mode! By setting another Option you can tell your device to go to Off Mode instead of Standby mode after the characteristic countdown. Then, in order to activate your device again, you just turn it on manually. Note: this feature is available only on rooted devices!
Why you will love it: if you use a GPS on your tablet with this Free App your tablet turns into a Car Navigator. How? Because your tablet turns off when you leave the car and your GPS is automatically On when you turn on your car engine again!!
Autosleeper is also perfect if you are listening to your favorite music on your tablet! Without pressing the Power button the song you are listening to Pauses when you turn the car engine off. And again: The instant you turn the engine on the song continues right where you had left it!
Autosleeper is an absolutely useful freeware that makes life easier and adds great value to your Tablet!
- Your Tablet goes automatically to Stand By mode when you turn off the car engine
- If you want to you set the Option to make your device go to Off Mode instead (rooted mode needed!)
- The Song you were listening to Pauses
- When you turn on the engine the Tablet goes On again without pressing the Power Button:
- Your GPS is on again
- Your music continues exactly where you had left it
- If you have told your device to go to Off mode, you just turn it on manually.
- You decide within how many seconds after you turn off your engine you want your Tablet to deactivate.
- Autosleeper is designed for Tablets and Smartphones
DOWNLOAD THE APP NOW FOR FREE!
It’s absolutely the best App for Auto tablets: Free, useful and cool.
Autosleeper is FREE, designed by the Supercoders.org, the global community of developers who make our lives easier.
This is a simply tool that allows the user to save battery enabling the mobile connection only when it's needed!
When the user unlocks the phone, data will be enabled.
When user locks the phone, data will be disabled.
To run this application, simply open it and enable the service, after which the system will operate silently without any user interaction.
This app does not modify the apn name, so allows you to really save a lot of battery.
3g battery saver auto automatic enable or disable unlock & lock phone with delay time and data mobile switch on off light and night mode
✔ Lock screen by one click in short cut(Floating button or app widget)
✔ Change Lock Screen icon floating button with more option for you.
✔ Support app widget to Lock Screen
✔ Provider floating button lock screen and you can move it anywhere on screen
✔ Support double tap or long press to hide floating button Lock screen
✔ Support auto enable floating button lock icon when reboot phone
✔ Setting Enable/Disable notification when turn on, turn off floating button icon Lock Screen
✔ Support lock screen from navigation bar when use gesture home/search button
✔ Support lock screen by the way double tap on the status bar to screen off
Guide user: To use lock screen you have to Activate administrator policy first.
Note! Uninstall: You have to go to "Settings—>Security—>Device administrators" to unchecked Lock Screen administrator policy and after uninstall Lock Screen app same as normal way .
Lock Screen is application free. Setup and enjoy!.
If you like Lock Screen app don't forget rate 5 star ★★★★★ or review. They are appreciate for me. Thank you so much
For use with the Daisy Bluetooth board, this application allows controlling up to six devices from your phone.
This app will control any Roving Networks Bluetooth RN-41 or RN-42 device. You can buy them from DaisyWorks, Inc., Sparkfun, and other electronics suppliers.