The program connects to Leica DISTO devices with Bluetooth interface (current models are Leica DISTO D3aBT, Leica DISTO D330i and Leica DISTO D8). From your Android device you can remotely trigger measurements and /or you can transfer the measurement data from the Leica DISTO into the Clipboardof your Android device to be inserted into any application.
Following Leica DISTO devices are supported:
Leica DISTO plus
Leica DISTO A6
Leica DISTO D8
Leica DISTO D3aBT
Leica DISTO D330i
Please note that this program only runs properly on Android devices with Bluetooth Serial Port Profile (SPP). The following Android devices are working with DISTO transfer:
Archos Internet Tablet
DISTO Transfer is NOT working on the following Android devices because their SPP is incomplete or deactivated by the carriers. Even though they may say their device is supporting SPP, they may not be fully functional and can not make the connection:
Sony Ericsson X10
Samsung Galaxy S
You need a special hardware to get this app connected to the total station.
See HARDWARE REQUIREMENTS below.
The program connects with several Leica total station models, see compatibility list below.
For more information, see the program documentation (www.tachyusb.de).
Your measure data can be viewed or exported via our WEB front end.
Connection to the total station only via an AOA RS232 adapter, e.g. Digitus DA-70160 (DO NOT CONFUSE with usual RS232-USB adapters!). The AOA adapter needs an extra USB power supply (e.g. battery pack).
If you need assistance purchasing the hardware, please contact us: firstname.lastname@example.org.
COMPATIBILITY (this version):
TC302/ 303/ 305/ 307,
TCR302/ 303/ 305/ 307,
TC403/ 405/ 407/ 410,
TCR403/ 405/ 407/ 410,
TCR403/ 405/ 407 power,
TC702/ 703/ 705,
TCR702/ 703/ 705,
TC(R)702/ 703/ 705 auto
Tachy (= tachymeter), USB, AOA
June 2014, Thoralf Baum, Leif Steguweit
If your mobile phone doesn't support unclassified Bluetooth device discovery, then this software is for you. With BluePair SPP software installed, your phone shall be enabled to pair with these devices. eg.Disto D8 laser distance meter Software usage: App. will scan for BT device. Alternatively, MAC address can be entered in the Edit Box. MAC address is labelled on the device usually under the batteries.
To transfer data between your mobile phone and Disto D8 use Leica Disto Transfer app or DimBT app from Libella Drafting. It's free (with limited features)