MavLinkHUB delivers two core functionalities.
As a proxy server - connects your drone (supported interfaces: USB (OTG) or Bluetooth) to the remote Ground Control Station using TCP/IP/UDP protocol stack (possible server modes: TCP point-to-point or UDP broadcast). This way you may transfer MavLink telemetry stream using widely available networks (like WiFi or 3G mobile).
As a protocol analyzer - delivers detailed informations on the MavLink messages passing the core of the application.
Tested for compatibility with:
GCS: Droidplanner, MissionPlanner, QGroundControl
Firmwares: ArduPilot (ArduCopter), MegaPirates.
MavLink low level protocol library based on DroidPlanner project (www.droidplanner.org).
An Android based ground control station for SteadiDrone systems and ArduCopter Flight controllers. SteadiDrone AGC enables you to wireless control your drone and take advantage of some great features, from full autonomous mission planning to changing settings, GPS guided mode, aerial mapping tools and much more!
The app is based on the open source project DroidPlanner, with the consent of the author.
Our Photo Coverage Calculator is one of those "must-have" utilities that was designed for UAV (or R/C) based aerial photographers who need know the altitude they will be flying at long before the job begins, especially if they're required to file operational information with the local aviation authorities before work can commence.
This utility gives you the information you need, when you need it. Having this information at your fingertips while you're in negotiations will impress your clients. You'll be able to answer their 'what if' questions on the spot.
Based on the camera's AoV (Angle of View) information and area to be photographed, UAV-CC will calculate the altitude required to complete the task.
Ground based photographers can use UAV-CC as well. Let's say you're setting up a shoot to photograph a sporting event and you need to know how far away you have to be in order to capture an image that fills the frame. It's a similar process, as long as you know the AoV of your lens and the height of the subject, then UAV-CC can calculate the distance for you.
Audio and vibrate alerts you at various times, these can be toggled in options. Vibrate is useful if you're wearing a headset (like fat sharks) or the Android device is in your pocket; the vibrate will shake the same amount of times as the current minute remaning, from the 5 minute mark (5 minutes = 5 shakes, 2 minutes = 2 shakes etc). This feature allows you to know how many minutes remain without being able to see the screen or hear the voice.
Different batteries may require different times. Different payloads (gimbals, landing gear etc) will also affect flight times as will the weather so please be aware of this. A dose of common sense should be applied and your fair weather time adjusted to suit. Three save slots have been included for three batteries, or use them for one battery but different conditions or configurations.
Quick Start Guide:
Set the timer up by flying in normal conditions and timing with a stopwatch to see how long each battery lasts. Now slide the bar to that time and press 'Battery 1 - Save' to store your first battery. In future you will need to start UAS Timer and load the saved battery. Repeat for another two batteries or configurations if required.
The UAV Battery Flight Timer will alert you at half time (if flying out for distance you now know when to turn back), 15mins, 10mins, 5mins, 4mins, 3mins, 2mins, 1min and 30 seconds. It will then sound an alarm on completion.
Ideal for the DJI Phantom quadcopter owners out there where you have limited ways of monitoring battery levels, yet might be flying FPV with an expensive GoPro and gimbal.
Great for all UAVs, including:
Parrot AR Drone
Also great for:
This app is for entertainment only, please do not rely on it exclusively as it has not been tested on every android device and we cannot be held responsible for any damage to your own equipment or that of others from the use of this app. By downloading/using UAS Timer you are agreeing to these terms.
This app uses Wifi to communicate with your PC and Bluetooth to control the robot. No program is required to be running on the NXT.
- Stream high quality video to your PC/Laptop
- Control NXT using keyboard, joystick or Gamepad.
- Detect distance with ultrasonic range sensor.
- Control phone's camera flash/torch.
- Launch Programs and Sounds on the NXT.
- Send Text-To-Speech commands to your phone.
- More cool functionality coming soon!
Note: You must install the free PC software found at www.SmartphoneRemote.com to use this app.
NEWS: NXT-G mailboxes and Sparkfun IOIO support in beta,
Check out the NxtCamera forum on google groups for more info:- http://bit.ly/Qd2Dvu
Tip: If you want to go driving far from your router then you can use free software called "Connectify" and set your laptop up as wifi hot spot. Just don't blame us if you loose your NXT down a rabbit hole!
Please rate this app if you like it!
*** 24 hour 'peace of mind' refund available. Just email us with your order number within 24 hours of purchase for a full refund ***
Please send suggestions/problems/comments to SmartphoneRemote@gmail.com
- PFD ( only Artificial Horizon at the moment)
- Map ( center on UAS-Pos )
- View channel
- Voice output ( TTS )
- curve editing
- output test
Keywords: OpenPilot CopterControl UAS UAV GCS MultiKopter QuadroKopter HexaKopter OktoKopter DodekaKopter Y6 X8 Aerial Pictures DIY OpenSource
If yes, then this app will help you to automatically change the phone mode based on configurations. With this app, you can set the time, day and mode(silent/vibrate/normal). Then 'Profiler' will automatically change the phone mode.
- Very simple to use and configure
- No special permissions required to use
- It's Free
For comments/suggestions, contact "firstname.lastname@example.org"
Tags: auto profile changer, automatically change mode, phone scheduler, profile scheduler, profile manager, phone manager, audio manager, Auto Profile Scheduler, Sound Profile, profile management, profile manager, Ring manager, ring scheduler, Sound Profile, Smart Profiles, Profile Manager, Power scheduler, Silence Scheduler, Profile, Ring Scheduler, Droid Scheduler, Profile Switcher, Smart profile, profile schedule
- Maximum Phone talk time
- Maximum Internet browse time
- Maximum Video / audio playback
- Maximum GPS use time
- Maximum 2D/3D game play time
- Maximum Camera shooting time
This Battery Maximum Power Booster app benefits you to maximize your battery life, minimize quick battery drain, and can use your phone for an extended time. Battery Power Booster boosts battery life cycle and increase battery usage on your phone for ultimate performance.
SensoDuino also saves the captured sensor data to a comma-delimited text file for graphing and analysis. You can control the frequency of sensor data acquisition, transmission, and logging (subject to the specifications of the sensor vendor.)
For more info: http://www.techbitar.com/sensoduino.html
PLEASE RATE: This is a free app and only through your ratings I can determine if it's worth supporting or discontinuing.
SensoDuino recognizes the following Android sensors IF THEY EXIST ON YOUR ANDROID DEVICE: Gyroscope, Accelerometer, Magnetometer/Compass, GPS, Light Level, Audio Level , Proximity, Pressure/Barometer, Temperature, Relative Humidity, Orientation, Gravity, Linear Accelerometer, Rotation Vector, Date, and Time.
Some software (virtual) sensors relay on the presence of hardware sensors to function. For example, the gravity sensor, linear acceleration sensor, and rotation vector sensor all of these software sensors relay on the presence of hardware gyro sensor on your Android device to function.
SensoDuino also features an Android sensor scanner that will list hardware and software sensors supported by your Android device as well as key sensor specifications such as max power consumption, resolution, vendor, etc.
- Read Android sensors.
- Save android sensor data to comma-delimited text file.
- Transmit android sensor data in ASCII comma-delimited format via Bluetooth.
- List available Android device sensors both hardware and virtual (software).
- Configure speed of sensor data capture, logging, and transmission.
- Log accuracy of most sensor data.
- Keep device awake to prevent loss of sensor data logging.
- Support Android devices from version 2.33
- Import geo-tagged sensor log into Google Map or GPSvisualizer.com for location analysis.
- Stream sensor data to a PC in real-time via Bluetooth for analysis and charting.
ELECTROMECHANICS & ROBOTICS EXAMPLE
- Use SensoDuino as a UAV & IMU controller for RC airplanes, quadcopters, etc.
- Use Audio, Light , Accelerometer (motion) sensors to trigger alarms, turn things on/off.
- Design game and robot controllers.
- Much more.
SensoDuino needs your permission to perform the following tasks: log sensor data to your device SD, read GPS data, transmit sensor data via Bluetooth, read audio sensor (microphone), send application crash reports and user feedback via the internet, and network state for Google Analytics.
SENSODUINO USER GUIDE
With new features added to SensoDuino, the captured screens may look slightly different from the production screens for a while until updated screenshots are uploaded.
You need to copy to your device the collection (.gcs) with associated pictures. You can also compress everything in a zipped file that should end with .gcz.
More information on:
More from developer
This is just a stub for donations, goto https://play.google.com/store/apps/details?id=com.droidplanner for the real and free App. But consider buying this stub to support the development.