You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
MONEY BACK GUARANTEE!
ROOT IS REQUIRED!!!
UNIQUE APP WHICH KEEPS YOUR DEVICE CLEAN AND ALSO GREAT FOR USING WITH RAM MANAGER!
IF YOU FIND A BUG OR IF YOU HAVE SOME PROBLEM, CONTACT ME BEFORE YOU GIVE LOW RATING, PLEASE.
Simple and effective application which a lot increases your peformance by cleaning your system. You can choose between quick cleaning and full cleaning. Quick cleaning clears your memory, file cache, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Application is also great application manager, you can uninstall, clear data and freeze or unfreeze your system and non-system applications.
-Restart system UI
-Clean drop caches
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clean dalvik cache
-Clean init.d folder
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clear app data
-Quick cleaning interval
-Exception list for files and folders
Root, Busybox and S-off are require to use most features in this app.
-Wipe Battery Stats
-Launch Hidden Menu
-Fix Market Links
-Themes chooser option
-Dual Mount Sdcard
-Enable/Disable Boot Animation
-Change boot animation
-Display Device Information
-Download Update.zip To Change Sdcard Read Speed
-Wipe All Webview Cache
-Install app from sdcard (to data and system)
-Restart Status Bar
-System App Remover/Backup/Restore
-MD5 Sum Fixer
-Install Cyanogenmod's DSP Manager
-Install Jellybean(4.2) Camera
-Install Jellybean(4.2) Keyboard
All suggestions on features I can add or change to improve this app are always welcome. Please fill free to E-mail me and ill get back to you as soon as possable.
To Help Support The Development Of This App Go To http://lukemovement.wordpress.com
DISCLAIMER: This app is made available for use at your own risk with no warranty of any kind.
This app require root! Make sure you device is rooted first! Some devices require busybox also.
Special thanks to drifty for the nifty logo!
All original credit for discovering the importance of efs and backups goes to autoprime!
Optimus G Pro and LG G2 support is due to drjbliss and loki
Freegee is all new and rewritten from scratch. Everything is done on device now so there is no more white listing every variant, only just enabling models.
If you run into an error please report it, send me a logcat. I can be reached via email or on xda/irc.
Dropbox support is under menu -> settings.
This is the donation version. It is exactly the same as the free version.
This is the next step in Project FreeGee. Have an LG Optimus G, LG Optimus G Pro or LG G2? If so this app will allow you to unlock (Optimus G only) or bypass your bootloader, remove LG Security and install cwm or twrp recovery. With removed lg security you can now uninstall any preloaded applications you want.
Please contact Shelnutt2 on freenode irc #lg-optimus-g with any problem.
The old 1.2.4 version, which is now depreciated can be downloaded here:
The source is available here:
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
*** Important note for ICS users: Honeybar is unsupported on ICS and will not hide the UI bar. I have examined the source for ActivityManagerService and it currently appears impossible to stop com.android.systemui
Introductory pricing for a limited time only $0.99! Get it while it lasts.
With experimental TouchWiz support (enable button offset)
Google's not addressing this bug, http://code.google.com/p/android/issues/detail?id=15408, so I am! Tap to show and hide the status bar that doesn't ever go away!
HoneyBar is an application that requires root access to toggle visibility of the Honeycomb status bar on the bottom of the screen. Root access is required to allow the hiding to occur.
On initial use, HoneyBar will enter an introductory mode. During this mode, a white rectangle approximately 100x54 pixels in size will appear in the middle of the bottom of the screen. Tapping this box will toggle visibility of the status bar. When the status bar is present, the rectangle will appear in the status bar; when it is not present, it will appear at the bottom of the screen.
After successfully toggling visibility of the status bar 10 times, the white box will no longer appear. Even though the box is no longer there, you can continue to tap that same location to toggle the appearance of the status bar. If you want to revert to the introductory mode again, you can 'Enable intro mode' again.
Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.
!! For Froyo and Gingerbread ONLY. NOT COMPATIBLE with Honeycomb/Ice Cream Sandwich/Jelly Bean !!
!! Chainfire3D is for 1ghz+ devices only !!
!! ROOT is required for this program, as well as a writable /system partition. S-OFF is also required on HTC devices !!
Features include reducing texture size and quality to reduce memory use and potentially increase game performance, as well as increasing memory use potentially increase performance.
If you also install the (experimental) EGL driver, AND your GPU supports it, AND you have the Pro version, you can enable 4xMSAA or 16xMSAA on a per-app bases. This can drastically improve image quality!
Be sure to check the thread on XDA for available plugins !
( http://forum.xda-developers.com/showthread.php?t=1087427 )
Chainfire3D has been tested on:
- HTC HD2
- Samsung Galaxy S
- Samsung Galaxy Tab 7"
- Samsung Galaxy S II
- Samsung Galaxy Note
- Samsung Epic 4G
- Motorola Atrix 4G
- Motorola Droid 2
- LG Optimus 2X
- Google Nexus S
Many users are running Chainfire3D on devices not listed here - it's likely to work on all modern devices. So far nobody has reported a failed install, so that's good. Doesn't mean problems can't happen.
!! There is some risk involved installing the driver. Your device may not boot. If you have CWM, it would be prudent to create a backup before installing !!
WiFinspect is a multi-tool intended for Computer Security professionals and other advanced users that wish to monitor the networks they own or have permission, i.e. the app is a security audit tool and not a hacking tool. The functions include:
* Network Information
* UPnP Device Scanner
* Host Discovery
* Network Sniffer
* Pcap Analyzer (three options)
* PCI DSS Menu
- Access Point Default Password Test (requirement 2.1.1.c)
- Access Point Security Test (requirement 4.1.1)
- Access Point Scanner (requirement 11.1)
- Internal Network Vulnerability Scanner (requirement 11.2.1)
- External Network Vulnerability Scanner (preparation for requirement 11.2.2)
* Host Information
* Port Scan
* Host Vulnerability Scan
This app is a student dissertation by Andreas Hadjittofis as part of his MSc in Computer Security at the University of Birmingham. The project is supervised by Dr Tom Chothia. The developers of this app cannot be held responsible for how this app is being used. The app comes with no guarantees.
* Based on your reports, Nmap WILL NOT WORK on devices running Android 2.1 and 2.2. You will get the "Some binaries could not be installed" error message and will be presented with the non-root mode. If you are using a newer Android version, please email me.
* Network Information (ROOT): Information about the connected network like MAC and IP addresses, gateway etc
* UPnP Device Scanner: Lists all UPnP devices on the network that are within the view of your device
* Host discovery (ROOT): Uses nmap to discover all devices on the network that are within the view of your device
* Network Sniffer (ROOT): Uses tcpdump to sniff on all packets that are within the view of your device. The resulting pcap files can be analyzed with Wireshark or the built-in Pcap Analyzer
* Pcap Analyzer: Uses jNetPcap to parse a pcap file. Three options: Packet Distribution, Bandwidth Distribution or Communicating Hosts analysis
* Access Point Default Password Test: Checks a pre-set list of default router passwords against your router’s control panel and notifies you if your router is using a default password
* Access Point Security Test: Displays the access points that are within the view of your device with a note whether they are secure (WPA/WPA2) or not (WEP or unlocked)
* Access Point Scanner: Displays the access points that are within the view of your device
* Internal Vulnerability Scanner (ROOT): Uses nmap to find all devices on the network that are within the view of your device. A note is given whether exploits exists for a given device based on its operating system and open ports
* External Vulnerability Scanner (ROOT): Runs Host Information, Port Scan, Host Vulnerability Scan, Traceroute, Ping or Sniffer functions on a given IP address or hostname
* Host Information (ROOT): Uses nmap to retrieve the device’s hostname, MAC address, vendor, operating system, device name and workgroup
* Port Scan (ROOT): Uses nmap to retrieve the device’s open ports. Click on a port to view the Metasploit results for the device's operating system and port
* Host Vulnerability Scanner (ROOT): Uses nmap to retrieve information about the host along with a note stating whether exploits exists for the device based on its operating system and open ports
* Traceroute (ROOT): Uses nmap to traceroute to a host
* Ping (ROOT): Uses nping to ping a host
* ACCESS_WIFI_STATE, CHANGE_WIFI_STATE, ACCESS_NETWORK_STATE: Used to determine if the device is connected to a Wi-Fi network and to retrieve the data displayed in Network Information function
* CHANGE_WIFI_MULTICAST_STATE: Used by the UPnP Device Scanner function
* INTERNET: Used to retrieve the device’s external IP address in Network Information function, for Metasploit search, and for the optional error reporting.
* WRITE_EXTERNAL_STORAGE: Used to store the nmap and pcap files
Application officially supports only HTC EVO 3D GSM/CDMA, however it might also work on other devices
If you install this application on unsupported device and something isn't working don't give bad mark. Send me mail and i will see what i can do
Submit issues here:
Info for HTC One XL, HTC One S, HTC Evo 4G LTE
There is a problem on some devices that is causing CPU1 settings not to stick. This is a Kernel/ROM issue, not the app
Kernel Tuner is tool for root users to completely customize their device behavior. This is the only application that offers full multi-core control over their devices. It allows users to control each core of their devices independently.
Custom kernel is required. Most of the features will only work on custom kernels. Check with your kernel developer to see if feature is supported
List of Features:
*Multi-Core CPU Handling – Control each CPU Core of your device independently
*GPU Overclocking – Only Qualcomm Snapdragon S3 and S4 devices with appropriate kernel are supported
*Voltage controll for the CPU
*View Times CPU was in
*Plugin for Tasker/Llama/Locale for changing profile
*Changing Capacitive Buttons Backlight
*Notification LED Timeout
[*]Storage(modify/delete SD card content) - used for writing application logs to SD card
[*]Your personal information(read sensitive log data) - read system logs for debugging purposes
[*]Network communications(full internet access, view network state) - Used for ads
[*]System tools(automatically start at boot) - Used to restore application configuration and settings after reboot
[*][*]System tools(install shortcuts) - Used for installing Home Screen shortcuts
If you have any problem or suggestion feel free to contact me, or write on official thread on XDA Developers
Google Plus: https://plus.google.com/u/0/b/115273553144904124119/
There is no need to give bad marks and report FCs in review. I am aware of every crash that happens and im doing my best to fix it as soon as i can. Thanks
This app is exclusively made for those who like to do high multitasking or those who love to play HD games on their device.
This app runs on any rooted device running on Android 2.3+
Basically its is a kinda of task manager and minfree changer, but actually it does more than a these.
Here are some features of free version of XBooster:
* DRC (Dynamic RAM calculation) check algorithm to boost device performance to the best possible.
* Unlike ordinary task managers that always run in background, XBooster does not leave any running activity of its own, so saves more free RAM.
* Intelligently changes minfree values according to device's hardware.
* Homescreen widget to kill useless background apps at anytime.
* Option to kill system apps to make more free RAM.
* Option for video/gaming graphics enhancement.
Upgrade to pro version to get all the features.
For any request,bug or suggestion, feel free to write me here: http://forum.xda-developers.com/showthread.php?t=2180150
Or you can also email me bugs and suggestions.
To get latest news and updates of my apps, join my official Facebook group here: https://www.facebook.com/groups/646454415368000/
PS: Before giving this app a lower rating or posting any negative comment, just share your logcat file with me on the above link.
Xperia™ is a trademark or registered trademark of Sony Mobile Communications AB
keywords: booster, ram booster, memory booster, game booster, high booster, memory optimizer, best ram manager
* Support 30+ languages
* Pin protection
* Manifest permission support
* Per app configuration
* Request timeout
* Proper Tablet UX
Permissions requested are for:
External storage - backup/restore for elite users
NFC - creating an allow tag for elite users
Boot completed - fix database on boot
Internet - updating the binary , free version ads
Support request emails : email@example.com
# super user , SuperSU , Super SU , rooter , root manager , superuser ,
click and type on phone,
control one phone from another,
get, save screenshots,
download, upload files,
get GPS location,
read and write SMS,
export contacts, messages, call list,
notify SMS, calls,
SSL support for direct connections - this product includes cryptographic software written by Eric Young (firstname.lastname@example.org),
3G support though androidwebkey.com.
Please write us an email if any of these functions doesn't work.
!!! REQUIRES ROOT !!!
Various Nexus and "stock Android" devices do not automatically "mount" mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.
StickMount is known to work on many devices, but is built *only* with *Nexus* devices in mind.
Once StickMount is installed and you connect a USB stick with a "USB host / OTG cable", the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.
If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.
Mass storage devices are mounted to "/sdcard/usbStorage/xxxx/".
----- (Pro) Kill apps preventing unmount -----
Sometimes an app has a file in use located on the USB device, and won't let go of it. This can prevent StickMount from unmounting the USB device. It will seem like the device stays connected (this is harmless). StickMount Pro provides an option that attempts to kill (terminate) all the apps that are preventing the unmount from succeeding.
----- (Pro) Media scan -----
StickMount Pro supports triggering the media scanner on each (un)mount action. This will automatically make the files on your USB device available in apps like Gallery and Music. Please note that the media scanner is not a visible process on all Android devices - it might actually work silently in the background without any visual cues. It may take a minute for your files to show up, so don't panic if they don't show immediately.
Even if you have this option enabled, you can prevent folders from being scanned by placing an empty file called ".nomedia" in that folder. If you put it in the root of the USB device, the entire device will not be scanned.
----- Filesystem support -----
The filesystems supported depends on your device firmware. On most devices, at least vfat/fat/fat32 and ext2/3/4 are supported. On the latest Android versions, ntfs is also supported in read-only mode. Some devices also support exfat out the box, but most do not.
StickMount can utilize the "ntfs-3g" and "mount.exfat-fuse" binaries to add support for ntfs (untested) and exfat, but these are not included. If you place the "ntfs-3g" or "mount.exfat-fuse" files in the root of your internal storage ( /sdcard ), StickMount will automatically use them.
You can find the needed files here:
----- Troubleshooting -----
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 out of 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
SD card unmounting: If your SD card unmounts when unmounting a USB device, you have a bug in your kernel. This is *not* a bug in StickMount !
I wrote this little root utility for myself to help consolidate and automate some root functions that are available in various other apps, but nowhere all together.
Note: this utility does not root your Android device--it assumes that your device is already rooted.
If you have problems or issues with the app, please contact me via email@example.com with as much detail as you can provide.
* display current root, /system and root (/) mount status, and root save status; will also display bootloader lock status for the Samsung Galaxy Nexus
* reboot options (normal, recovery, bootloader)
* power off device
* remount rootfs (/) and/or /system in read-write or read-only mode; note: remount behavior changed in Android 4.2 and higher that causes remount effect to not
be usable by apps other than the one that initiated the remount
* save (protect) / restore root function; for 4.2 devices with ext2/3/4 /system partitons, a copy of su binary can be saved and later restored; for 4.3
devices, I've implemented Pau Oliva's 4.3+ "OTA rootkeeper" functionality (i.e., via keeproot.sh)
* freeze (disable) or thaw (enable) an application (use caution when freezing a system app!); you can select showing user and/or system apps in the Freeze/Thaw Display Options in the Preferences/Settings menu
* display system (getprop) property values
* Samsung Galaxy Nexus, LG Nexus 5, and Nexus 7 (1st gen) only options:
-- flash a stock recovery
-- flash various custom recoveries
-- make recovery "stick" (keep stock recovery from overwriting your custom recovery)
-- identify currently installed recovery
-- bootloader lock, unlock, status (Galaxy Nexus only)
* option to turn confirmation mode on / off (defaults to on)
* option to turn "safe mode" on for the app to prevent any su or flashing operation from occurring
Warning / disclaimer: the author of this app is not responsible for any loss or damage caused by or related to its use.
If you are not comfortable with or knowledgeable about the proper use and functionality of this app, please discontinue its use and uninstall.
INTERNET - for downloading recoveries from the internet
WRITE_EXTERNAL_STORAGE - this is for the downloaded recoveries and work files used to identify which recovery is currently installed
ACCESS_SUPERUSER permission to support interaction with SuperSU
Keywords: root status, root checker, mount status, flash stock recovery, flash custom recovery, reboot recovery, reboot bootloader, power off device, remount
system, make recovery stick, identify recovery, save root, restore root, freeze app, disable app, thaw app, enable app, bootloader lock, bootloader unlock, bootloader
status, getprop, system properties
Android is a trademark of Google, Inc.
Be safe and backup everything either to local storage or cloud storage with automatic syncing!
If you don't know where to get your recovery files, just download directly from this app!
1 - Flash boot and recovery images without even needing to go to recovery.
2 - Flash zip files. Option to wipe cache, dalvik and data when using TWRP recovery.
3 - Download CWM and TWRP, Gapps, Franco Kernel.
4 - Automatic Loki Patch when needed.
5 - Full nandroid backups/restores when using TWRP recovery.
6 - Backup/Restore kernel and recovery using Sdcard or cloud (Dropbox, Box or Google Drive).
7 - Automatic cloud synchronization of backups between devices and desktops.
8 - Keep track of recently flashed items.
9 - Flash multiple files and build your flash queue.
11 - Flash from anywhere! Do you want to flash from your favorite File Explorer or Email app? No biggie, that also works together with Flashify.
This app is free but has a limit of 3 flashes per day. You can unlock the limit with a quick in-app payment.
Additionally I added some init.d scripts, it's advised only to install these if you know what you're doing!
Root is required!
WARNING TO ALL NOOBS:
Stop flashing apns-conf.xml if you don't know what It is... If your data connection works why would you flash it?
It's only for phones that have no APN configuration so far.
To restore just download a custom rom from XDA-Developers and pick the /system/etc/apns-conf.xml file from there..
More from developer
** Android 4.3 and higher currently is not supported. Program will do nothing **
** HTC Users, due to system file protection, S-OFF is required **
TimeZone Fixer is a small program which updates Android timezone files to the latest version (2013i now). It is useful if the time zone changed in your area, or Daylight Saving Time has been abandoned or adopted.
Widget should work at any Android 2.2 and higher mobile-device, but skin is highly customized for MotoBlur phones (it looks like identically to other Blur widgets like GPS/WiFi/Bluetooth Toggle).
***** READ CAREFULLY *****
Program consists in three parts: main widget, system module for data management and it installer. Run MTW installer, press install and reboot your phone, before using (widget can be found with long tap at main screen). Uninstall system module before removing program (or widget will remain at phone)!