Warning: check if you are on rom s with the service mode installed.
These are usually launched by entering some codes from the dialer.
But, some devices (eg. Galaxy S3 alpha - SC-03E, Galaxy Note 2 - SC-02E) can not launch ServiceMode App from the dialer.
This application makes it possible to launch ServiceMode App in such devices!
By using the ServiceMode App, On / Off switch CS / PS mode, LTE is possible, but there is a possibility that the device will not work if the wrong setting.
*warning* please use at your own risk.
* The contents of the screen and Testing ServiceMode, for me does not know how to set it.
- There is a possibility that can be used for any other screen Galaxy Testing, and may not be supported by all devices.
- There is a possibility that the device can not be used by the update.
- Please use at your own risk.
- Samsung Galaxy S3 SC-03E, SC-06D
- Samsung Galaxy S2 SC-03D, GT-I9100
- Samsung Galaxy S SC-02B
- Samsung Galaxy Note2 SC-02E
- Samsung Galaxy Note SC-05D, GT-N7000
- Samsung Galaxy Tab 7.7 Plus SC-01E
- Samsung Galaxy Tab SC-01C
Testing Screen only works ( ServiceMode not available )
- Samsung Galaxy Nexus (SC-04D)
- Sony Tablet S (SGPT112JP/S)
- ARROWS Tab (F-01D)
- AQUOS PHONE SH-12C
Dial pad does not accept the input of secret code. However, there may be some cases where the function corresponding to the secret code that are present.
In that case, Using ShowServiceMode, you can call the hidden screen. (It has been confirmed by many of Galaxy series)
----- COMPATIBLE MODELS LIST -----
Please check this page by all means, before you buy the app.
You can start in many models. However, depending on the model, you may not use some features.
----- NOTICE -----
May become unavailable to after the system update because it is beginning to be limited by Samsung. This limit can not be exceeded in the application of the general.
In addition, there is what need root privileges from the initial lot in recent models.
Root privileges will be required if your smartphone is limited by Samsung.
If you are getting root privileges, and will work in the next step. This blog post is going to be your reference.
Note) Cases such as the following are present. Factorymode=ON、keystr=OFF
After making this setting, please use the 500x or 501x of ShowServiceMode.
----- NOTES -----
AT YOUR OWN RISK!
To malfunction or trouble due to the change the setting, the developer does not take any responsibility. Please use this on your own risk. By the settings, all data disappear, or continue to occur is an error as the case may be. Actaully there may be a risk that would prevent the call. Additionally, the screen after the call is not a ShowServiceMode app.
Please use on the understanding, is that users should not change the settings easily. Sorry, support for foreign language is difficult. Developers can understand only Japanese.
In addition, other models and SC-05D SC-03D Please note, because the developer is unable to confirm the operation, because there is a delay in response.
----- To those who use the Ver3.2.2 and Ver3.2.3 -----
If you can not run with an error, please update to Latest version.
To all who happen to experience any problems, I apologize.
----- Understanding False detection security app -----
I have confirmed that in the application below, it is erroneously detected as malware.
The ShowServiceMode, have not been used also ad delivery service and you do not have Internet access privileges.
Since it does not contain any malicious code, please use it in peace.
----- Evaluation version -----
There is also a free version for an information provider, is in Japanese only.
This is provided, like an evaluation version, as free version for information providers. You will be asked to provide information such as Bug reports and behavior which you find out.
If you fall in love with ShowServiceMode, please consider purchasing!
----- Review comments -----
Although I check all review comments, I do not reply to it.
It is because there is it in order to evaluate an application.
However, I look forward to your future request and feedback, comments!
In fact, the Android system open engineering test mode most of the players in this mode can not really appreciate the full functionality of the engineering model, but some of the basic functionality or have, especially practical battery testing, network testing, etc. . Engineering mode, players can also SIM information accordingly, below we show you how to get into this mysterious project mode.
In fact, engineering test model of the Android operating system into the method is very simple, the vast majority of mobile phone simply call up the dialing keys, and then enter * # * # 4636 # * # * to. Enter the engineering mode menu with four options of mobile phone information, battery information, usage statistics, Wifi Information. Of course, the various versions of the ROM may be, there are some differences in the expression on.
1: In the phone message, players can view their own phone IMEI, network operators, whether roaming, signal strength, and whether roaming basic information. In addition, after pressing the option key, we can also use more features, players can customize the radio band, you can view the SIM contacts, fixed dialing, dial-up service, you can also obtain a the PDP list (a). You can lock in a useful function in the page 2G, lock 3G or set free to switch into 2,3 G, even special when you can adjust for non-flight mode signal state, such as CDMA handsets to choose GSM only option The phone becomes no signal, it is generally difficult to detect, and that phone bad birds.
2: We can also view the phone's battery information, click enter, you can see the current battery status, battery level, battery status, temperature, battery material, voltage, etc. all at a glance rendering The front of the player.
3: Players can also enter "usage statistics" menu to view the use of each program, Here you can search using time Sort option, so that players can clarity guidance on which program spend the most time.
4: the vast majority of mobile phones can view the wifi information can see a lot of what you normally do not see the wifi API, Config and Status parameter.
: Engineering mode more often is a view of information and testing platform phone functions. Players grasp the engineering mode, can you more of a love machine understanding.
The purpose of doing this software
1: to facilitate support * # * # 4636 # * # * cipher machine direct shortcut to enter the engineering mode;
2: does not support * # * # 4636 # * # * cipher machine can also enter engineering mode;
Warning!!! Root is required on most of the jellybean roms for Galaxy S2/S3, Note/Note2 and maybe more.
If you receive the message:PreconfigUI does not support SingleCSC - this means that your rom does not support CSC Changes.
I cant add CSC-s to your rom, so please dont ask.
FOR: Samsung Galaxy S GT-I9000 and Samsung Galaxy S 2 GT-I9100, and Galaxy S3 GT-I9300
It may work on Vibrant and Captivate but its not tested.
THIS TOOL WORKS ONLY ON STOCK SAMSUNG ROMS! NO CUSTOM ROM SUPPORT
WARNING: Changing CSC will wipe your phone. Please backup any information!
Please send your feedback in ENGLISH. Thank you! :)
This tool will help you change your CSC (Customer Sales Code) on your Samsung Galaxy S / S2.
This tool will not work on any other phone (Like older galaxy, HTC, Motorola, etc...)
This will only work if your current rom is MultiCSC
Disable Service helps you to disable services running in the background such as "push service" ,"upload service" or "pull ad service" and so on.
(Note that:on 2.3,you have to enable the usb debugging mode)
(Thanks for your donation:吴彬海,John Georgiou,杜亚辉,Khrushch Pavel,秦森,沈明德,苏勇,刘啸天)
Have you ever wanted to know the Country of Origin behind the label 'MADE BY SAMSUNG'? When the phone was manufactured? How frequently the phone was used? How many times it has been connected to the Charger? Do you want to know the Knox Warranty Void status without entering to the ODIN Download Mode?... Then this app is for you.
☆ Facebook: https://www.facebook.com/groups/phoneinfosamsung/
☆ XDA thread: http://forum.xda-developers.com/showthread.php?t=2609045
★ 'Secret Codes'
- List all of Samsung secret codes (HiddenMenu) on your device. Note: You may need ROOT to launch secret codes (use 'Launch 0' method).
★ 'Firmware Browser'
- Browse for the stock firmwares available online, for your phone and for any other Samsung model.
- View firmware's details, and redirect to the SamMobile.com website for the download link.
★ 'Other Tools'
- 'CSC Changer': Change the CSC. WARNING: Changing the CSC will Factory Reset your device (wipe all user data). This tool requires root + multi-CSC stock firmware.
- 'CSC Verifier': It is Samsung built-in tool. Requires root + stock firmware.
- 'ServiceMode MAIN MENU': It is Samsung built-in tool. Requires root + stock firmware.
- 'S/N Decoder': Obtain information about Country of Origin and Manufacturing Date from Samsung serial number. You can enter serial number from ANY Samsung phone (including OLD phone, FEATURE phone and NON-SMART phone).
- 'IMEI Analyzer': Check the IMEI for the validity by calculating the Check Digit (according to Luhn algorithm).
★ 'Refurbishment Check'
- Supports ALL Samsung models (formerly '[Note 3] Fake / Clone Detector').
- 'Device Usage Counter'
★ 'CSC Code Lookup' (CSC - Consumer Software Customization, aka Sales Code, or Region Code)
You can search for the CSC code (e.g. XME or BTU), or the country/network name (e.g. Malaysia or Vodafone...).
★ Main Features: Displays the following information about your phone.
▪ GENERAL INFO:
- Manufacturer / Brand
- Phone Model
- Device Type
- Product Name
- Country of Origin
- Manufacturing Date
- Knox Warranty Void
- Mobile Operator Name / Mobile Network Code
▪ CSC INFO:
- Original CSC Code
- Firmware's CSC Code
- Active CSC Code
- CSC Country
- CSC Country ISO
- CSC Product Code
▪ DEVICE ID:
- Samsung Serial Number
▪ FIRMWARE INFO:
- Bootloader Version
- Baseband Version
- PDA Version
- CSC Version
- Kernel Version
▪ OS INFO:
- Build Number
- Build Fingerprint
- Build Description
- Build Date
- Android Version
▪ HARDWARE INFO:
- Colour / Internal Storage
- Hardware / Board
- Platform / Chip
- Modem Board
- Hardware Revision
- Total RAM
- Screen (physical size in inches, resolution in pixels)
- Battery (technology, capacity in mAh, health)
▪ USAGE HISTORY:
- Headset Connect Counter
- Charger Connect Counter (root required)
- S Pen Detach Counter (root required)
Please be noted that S Pen Detach Counter is available for Galaxy Note series only.
NOTE: This app works properly with the Stock Firmware. On Custom ROM some info may not show correctly.
Now users can choose to use this ad-supported version or a donated (Plus) version.
For those who have donated to me, you can still update this app without ads.
But if you uninstall it and re-install again, you can not enter the donation key anymore.
In that case you can purchase the Plus version, then tell me your Order number so I can do the refund for you.
☆☆☆ Ability to Remove Ads and Export info to the SD Card (Plus version only) ☆☆☆
!! Application is only for devices running MTK (MediaTek). If you have a different platform, you will get a message that the device is not supported with the proposal to uninstall this applicaton.
!!! Attention. On some devices (basically, these are some models of Huawei) manufacturers denies access to the Engineering Menu, in connection with which these devices will be able to function the program only with the given Root access.
For those who would like to support the project, offer donate-version: Engineer Mode MTK donate
1 display device info
2 information of device and running status
3 easy open engineer mode and MTK engineer mode
4 backup IMEI for MTK mobile
5 recovery online update
6 easy update tool via sdcard
7 Enable USB Mass Storage Device,connect cable first
8 crack operator GPRS lock for MTK
9 free the network access limited via GPRS
10 power GPS search
11 Power the gps search satellite ability
12 enable AP
13 easy reboot to recovery
*** IMPORTANT! Some manufacturers not allow the use of these codes and they may not work on your device. By using secret codes you can change some of your device settings. Use at your own risk! ***
DISCLAIMER: This information is intended for experienced users. It is not intended for basic users, hackers, or mobile thieves. Please do not try any of following methods if you are not familiar with mobile phones. We'll not be responsible for the use or misuse of this information, including loss of data or hardware damage. So use it at your own risk.
Please share secret USSD codes you already know and I will update the application accordingly.
Enjoy and have a fun!
some secret code example:
This code can be used to get some interesting information about your phone and battery. It shows following 5 menus on screen:
1> Phone information
2> Battery information
3> Battery history
4> Usage statistics
5> Wifi information
This code can be used for a factory data reset. It'll remove following things:
1> Google account settings stored in your phone
2> System and application data and settings
3> Downloaded applications
It'll NOT remove:
1> Current system software and bundled applications
2> SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
This code is used to get information about phone camera. It shows following 4 menus:
1> Update camera firmware in image (Don't try this option)
2> Update camera firmware in SD card
3> Get camera firmware version
4> Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
■ Supported Smart Phone Models:
- GalaxyS, GalaxyS2, GalaxyS3, GalaxyS4, GalaxyS5, GalaxyS2(HD), Galaxy Note, Galaxy Note2, Galaxy Note3, Galaxy Note4
- Supported OS: Android 2.2+
■ Supported Washer Models:
- Check the Smart Control button and the Smart Care mark in the control panel and the information about them in the user manual.
- For below model, Please refer to the user manual's Mobile App part and LCD setting part. Download "Samsung Smart Home" app in case of trying to using the Smart Home..
- 2014 Supported model
K149HIB/HC, K149HWB/HC, WW10H9210EW, WW10H9400EW/ET, WW10H9410EX/FA, WW10H9410EX/GU, WW10H9410EX/NQ, WW10H9600EW/EG, WW10H9600EW/EO, WW10H9600EW/EU, WW10H9600EW/LP, WW10H9600EW/WS, WW10H9600EX/EU, WW10H9610EW/AH, WW10H9610EW/SC, WW10H9610EW/SP, WW10H9610EW/ST, WW10H9610EW/SV, WW90H9410EW/YL, WW90H9600EW/SA
- The "Smart Check" may be represented as "Smart Care" depending on the language.
■ Please check these items before using the Smart Washer App!
- Check whether your washer's Wi-Fi connection is normal before controlling your washer remotely.
- When the Wi-Fi signal is weak due to your washer's location, a problem may occur when controlling your washer remotely.
- External light may cause the camera recognition function to be incorrect. Adjust the focus and angle properly for the auto camera recognition to operate correctly.
- Check the supported washer and smart phone models.
(Other models are not guaranteed that they will operate normally.)
- Depending on the font you have set in your mobile phone, Application's screen may look different.
If you have a mobile device with a MT6577/MT6589(T)/MT6592 chipset, you probably noticed the GPS functionality is pretty bad. Most notably, it can be quite difficult to get a 'fix'. This can be resolved by saving recent EPO files, which are used for Assisted GPS. These EPO files can be downloaded manually (which takes some time), or you could just use MT GPS!
This application retrieves the latest EPO files and saves them to the right location. The files should be updated daily to make sure you can always get a GPS fix quickly. The usage is pretty straightforward, but here is a set of instructions:
- Make sure your phone is rooted
- Run MT GPS
- Download the EPO files
- Go to Location in Settings and enable everything
- Turn on your Wi-Fi
- Start the app requiring GPS!
This should be sufficient to get GPS working on most of the devices with a MT chipset. However, if it still is not working after following the steps above, try this:
- Update EPO files as stated above and make sure Wi-Fi is turned on
- Go to Location in Settings and enable everything
- Download MobileUncle from the store
- Run MobileUncle
- Choose 'Engineer Mode'
- Choose 'Engineer Mode (MTK)'
- Go to the tab 'Location', and choose 'YGPS'
- Go to the tab 'Information', and choose 'hot', then 'full', then 'AGPS RESTART'
- Start the app requiring GPS!
If it still is not working, chances are you have a mobile phone with a faulty GPS chip. Some phones have poor antennae, which means you can't fix the GPS issues with an application. This application has been tested on a variety of phones with various MT chipsets, but we can't test all the phones available on the market. Thank you for your understanding.
Normal results are: avg 58-60fps, a bell shaped histogram, and stdev under 10. Details are dumped to LogCat. See web site for Droid 2.1 update discussion.
3.1.0: Added stdev
!!! Application is only for devices running MTK (MediaTek). If you have a different platform, you will get a message that the device is not supported with the proposal to uninstall this applicaton.
This donate version, installing it you support the developer.
To install the free version, please go to: Engineer Mode MTK free
This app flashes and backups your device recovery and kernel without rebooting it very fast and easy without a PC or any outside influence.
This app have over 3500 build-in recovery collection of images (ClockworkMod/TWRP/PhilZ) also you are able to flash unlisted images from external or internal storage.
Rashr is able to flash over 90% of all Android devices!
This project is fully open-source and.
★Open-Source (on GitHub: https://github.com/dslnexus/Rashr)
★OpenRecovery Script manager to flash ZIPs
★Over 3500 Build-in Recoveries (ClockworkMod/Touch, Team Win Recovery Project and PhilZ-Touch)
★Flash Kernel and Recoveries without PC
★Flash already downloaded IMGs from internal and external storage
★Backup Kernel and Recovery IMGs without PC
★Full command logging for more control what this App is doing
★If you don't want to support my work you are able to disable the Ads
★Free full app without Ads and any restrictions
★Support my Work only if you want (with Ads or In-App donations)
----- App-Permission and why Rashr need it -----
-Read and write on external storage: save recoveries images or read already downloaded images
-Full network access: download recoveries, kernel and updates
-Google Play billing: donations over Google Play
-[Superuser-App]Full access to all functions of the device: Flashing recoveries and kernel
1. Select your script
2. Set root if needed