Light Ops requires a TCP product installation as well as the use of the TCP Lighting app to setup the smart scenes and rooms. You can connect locally via WIFI or to the cloud for remote access. For cloud access, you need to enable remote access in the TCP Lighting app and then use this username and password to connect with Light Ops.
This app can control your lights in a different way than the official app, providing a faster interface and the ability to write NFC tags to trigger light on/off actions or smart scene actions..
Tested with NFC tags from whiztags (NDEF minimum 137 byte tags)
Note: This app is not associated with Connected by TCP Gateway product. The purpose is to provide additional features, such as using NFC to control your lights.
To use, select the fixture from the drop down menu and input either the Trim Height and Floor Distance or the total Throw Distance. The calculator then determines the Beam and Field spreads and the estimated Footcandles at that distance for the fixture. As a bonus it will also tell you the color frame size for the unit.
In addition, if you need more information about the unit the app links to the manufacturer's data sheets.
This app will be fully supported so if you need additional units not on the list, feel free to use the provided method on the app to request new fixtures or features that are not on the initial release.
To our European users: Most measurements are based upon multipliers, so if you input meters instead of feet, the app will output meters. The only unit that will not be correct when you input meters is the footcandle measurement.
This app is free thanks to a sponsorship by Altman Rentals, a New York area rental company that provides lighting rentals in the greater New York area. Most of the fixtures provided in the app can be rented from Altman Rentals including the Source Fours and Altman Units.
Sphero Lights now works when the Sphero is Charging! You no longer has to worry about it running out of battery.
Added speed and intensity feature to color lights per suggestion.
Now works with Sphero 2! Thanks for waiting.
Added color to your night light! Also, when you choose any light options through the menu screen, it will reset the Sphero now so it doesn't interfere between different light options.
Fixed crash when no Spheros are faired.
Fixed layout issue on gingerbread and older devices.
Please don't feel hesitant to email firstname.lastname@example.org for questions and suggestions.
Just added a great new feature! Now turn on the new Disco Light feature and see your Sphero pulse colorful lights to the sound of your music!
If you have a Sphero, you know it's great running and bumping on the floor. But do you know Sphero can also act as a super cool decore? With Sphero Lights, your Sphero is now suddenly a Color Changing Light, a Night Light, a Strobe Light, and a Morse Code sending Light, and even a Disco ball Light. So try it and let us know what else you want your Sphero Lights to do.
-Morse Code Light
WARNING: Take a look to new sketches in order to use seek bars
Get code samples and post your inventions at https://www.facebook.com/ArduinoTotalControlApp
Get the manual: https://www.dropbox.com/s/99z35qvlfnbyfo0/Arduino%20Total%20Control%20Manual.pdf?dl=0
Build your layout, control up to 24 x 2 circuits + 8 dimmer bars on 7 different devices at the same time, program their functions, take pictures of what you want to control or choose a picture from your gallery (each picture box has three states that can be switched dynamically via app or Arduino) and have fun switching your circuits in latch (toggle button) or momentary (Touching Pictures) modes.
NEW: Get accelerometer data for your Arduino (when multiple devices connected, accelerometer data will be sent to all Bluetooth devices).
Connect via BLUETOOTH and/or WiFi.
Thanks to your feedback and support, Arduino Total Control now can be fully customized. You can manage the layout as you like the most! Just enable "Edit properties" form the menu to hide/show buttons, text or images, then, keep your finger (long click) on the picture in order to change the displayed image, and choose one from your gallery or take a shot.
Excellent for Advanced home automation, school projects and more.
Data sent by app are:
• '<' Indicates special command like accelerometer for example:
- 9.81 m/s^2 will be sent as integer "981"
- 56.24 m/s^2 will be sent as integer "5624"
• '[' Is sent every 2.5 secs in order to know we are still connected
• Or whatever you want! now you decide what the sending command is!
Objects displayed by app
• Images, Can be used as visual dynamic indicators and / or push buttons (with editable commands)
• Text Tags, Can be used as descriptors, as sensor sources, or to display data from Arduino
• Toggle Buttons, Can be used as Buttons :p (with editable commands)
Get feedback from your board!!!
Board -> android codes are strings that are displayed as feedback! NOTE that empty strings and "\r" will have no effect on the displayed text. End each string with "\n" (New line character) in order to let the app know when to display the incoming string.
You can easily assemble your own board using a Bluetooth – serial module (like JY-MCU...), and getting the previous codes from micro-controller's serial port (if you want to communicate via WiFi, use the Ethernet shield)
You can get the code from the app for free, just copy and paste into your Arduino sketch, then auto-format, and download the sketch!
Arduino Code provided!!!!!
Arduino connection schematics provided!!!!
Log Arduino Total Control V 7.3
*Connect up to 7 bluetooth devices
*Connection Manager menu added
*Only serial port profile devices displayed
*Manual orientation selection for each layout
*Reset layout properties button added
*New Beginner Codes
Log Arduino Total Control V 7.4
*Layout Sharing feature available
*New Arduino Advanced Sketch for Ethernet and Bluetooth
Log Arduino Total Control V 7.5
*8 scroll bars available
*New Arduino Beginner and Advanced Sketches for Ethernet and Bluetooth
*WARNING: Take a look to new sketches in order to use seek bars
Send me by email to email@example.com
Your comments can help me to develop and improve the application
Lighting Console allows you to send DMX over ARTNET.
2 Submaster with 512 dimmers
You can config :
Short name and long name
16 ports and 16 subnet
This version is limited to 64 dimmers and 1 effect and 1 submaster
A full version is available
Lighting Console doesn't work if an other software use the same protocole ARTNET.
ANDROID V2.3 minimum
Toggle Light integrates Tiny Flashlight with Power Toggles. Power Toggles is an advanced power control widget and now you can start the camera flash with a custom Toggle Light switch.
To create a new Toggle Light widget:
1. Find the Power Toggles widget and add it to the home screen
2. Tap on the "Add Toggle" button
3. Choose the "Custom" tab
4. Tap "Toggle Light" from the list
Users can connect mobile devices such as Galaxy Smartphones, Gears, and GearFits to smarthome devices, and remotely access smart home services including status check, device control, home view, and customer support.
Samsung smarthome app supports Android OS 4.0 and above, and optimized for Samsung Galaxy and Galaxy Note smartphones. Some features may not be supported in different smart devices.
Icons( http://android-ui-utils.googlecode.com/hg/asset-studio/dist/icons-launcher.html#foreground.type=clipart&foreground.space.trim=1&foreground.space.pad=0&foreground.clipart=res%2Fclipart%2Ficons%2Fdevice_access_flash_on.svg&foreColor=ffec00%2C0&crop=0&backgroundShape=none&backColor=ffffff%2C100 ) by Android Asset Studio ( http://android-ui-utils.googlecode.com/hg/asset-studio/dist/index.html ) / CC BY ( http://creativecommons.org/licenses/by/3.0/ )
Through your smartphone, the application connects with the smart RF box (http://www.elkoep.com/products/inels-rf-control-wireless-control/rf-control-units/smart-rf-box-elan-rf-003-8488/), which further communicates with elements of iNELS RF Control.
It transmits and receives commands of up to 40 elements, and processes set programs for automatic regulation. (You can gradually expand the installation from 1 element of iNELS RF Control on up)
Thanks to bi-directional communication, it visualizes the current status ON/OFF, temperature, brightness…
The application is the central control point of your home, and lets you regulate hot water or electrical heating with the option of setting a weekly program. The function "open window detection" ensures that the heating is switched off while windows are open to ventilate. Wireless sensors visualize the temperature on the balcony, garage, gazebo, etc. The application switches such appliances as fans, garage doors, blinds, sprinklers, sockets, etc., even with the option of time setting. Lights are dimmed to create atmospheres when reading, watching movies or when hosting a party with friends. You can dim all light sources, from classic light bulbs to LED light sources (LED RGB strips). You can add to the application the video cameras iNELS Cam or Axis, and then e.g. monitor what's going on in your home ONLINE from vacation or work. A vital part of the application is its light scene function, where you can make multiple commands with a single press. For example, the departure button - by one press, you will switch off all lights and sockets in the home. Thanks to automatically obtaining the IP address with the DHCP server, you do not need to set up any networks. (if you do not have a set fixed IP address).
A suitable start for your smart home is the set “HOME UNDER YOUR THUMB” (http://www.dumpodpalcem.cz/)
The application supports the following languages: English, German, Czech and Croatian
A detailed manual for iHC-MARF is available for download http://www.elkoep.com/downloads/iHC-MARF%20manual%20EN.pdf
TRY OUT THE PROMO APPLICATION HERE
FULL VERSION AVAILABLE FOR DOWNLOAD HERE:
For proper operation of the application you must have an updated eLAN firmware to version v2.3.187
Link to firmware: http://www.elkoep.com/downloads/ELAN_RF_003.bin
On Controls is designed by and for professional integrators. To learn more about On Controls or find a certified installer near you, visit the On Controls website at http://www.oncontrols.com
· Lernen Sie was Ihnen ein sonniger Tag noch bringt
· und erkennen Sie rechtzeitig, wenn mal etwas falsch läuft
Hinweis: \\\\diese App funktioniert NUR mit dem E.ON SolarManager System und aktivierten SolarManager Account\\\\\
Für E.ON Kunden die Ihr E.ON Kundenkonto über das mobile Serviceportal nutzen wollen, benötigen dafür die Mein-E.ON App
Monitor and control your home energy use from anywhere using E.ON’s innovative energy management solution for your smart phone or tablet computer.
Requires E.ON’s Smart Monitor and Control product installation, an activated account and a valid subscription.
If you are looking to manage your bill please search for our “E.ON Energy” iPhone application that is free to use.