- Gyroscope Sensor
Gyroscope sensor can measure six directions at a time. You will be able to see the effects immediately by rotating your phone slightly. Now Gyroscope sensor is mostly used in 3D game development, and possibly indoor navigation in future.
- Light Sensor
Light sensor is applied to detect the light intensity of the environment, and then adjusts screen brightness and determines whether to turn off the keyboard light. Test the effect by putting your phone in dark place and retrieving it.
- Orientation Sensor
Orientation sensor is applied to detect direction status of the device, i.e. auto rotate screen when device is rotated horizontally. It can also be used as measure equipment like Spirit Level.
- Proximity Sensor
Proximity sensor measures the distance between two objects, usually the device screen and our hands/face etc. Test the effect by moving your hand forward and backward in front of the device in Sensor Box for Android.
- Temperature Sensor
Temperature sensor provides information about your device temperature, thus you can take action when the temp is too low or high.
- Accelerometer Sensor
Accelerometer sensor is applied to detect device directions, i.e. auto rotate screen when the device is rotated vertically. It is also widely used in game development.
Sound detects the sound intensity around you and provides you detailed information about the intensity changes.
- Magnetic Field
Magnetic Field is used in many areas like metal detection and compass, which bring us lot convenience in our life.
Pressure is used to detect environmental pressure, thus to forecast weather and temperature.
Sensor Box for Android only detects changes. It may not show the correct temperature, proximity, light and pressure values if no changes occur.
For better performances, sensors are usually used together. Check out the live demonstration inside the application! Any feedback the email address below is the best way to get in touch with us.
You'll be able to test the following:
Accelerometer, gyroscope, compass, proximity sensor, pressure sensor... You'll be able to check which sensors are supported by your phone and all the information and values provided for each sensor.
You'll be able to check your LAN status: internal & external IP, gateway, DHCP server...
Signal, network type, external IP, SIM data...
You'll see the real data provided by the GPS: satellites, latitude, longitude, altitude, speed...
Level of charge, time on, temperature, health...
How many points of contact does your device recognize?
Information about hardware and software like CPU, RAM, kernel version, screen...
This app is similar to EVEREST or AIDA64, but apart from showing the components and system information, it also shows sensors readings.
The Pro version of Phone Tester displays more information (CPU speed, phone memory, sd card memory) and removes the ads.
no ads or in-app purchases
simple, clean and colourful user interface
- get extra information such as range and resolution
- record sensor values to monitor changes over time
SENSORS (availability depends on device):
- Geomagnetic Field
- Linear Accelerometer
- Rotation Vector
SPECIAL THANKS TO:
- http://icons8.com/ for the launcher icon
If you do have a gyroscope, be aware that the quality of the drift compensations on the gyroscope sensor vary considerably among devices. In the case that your device has a gyroscope that doesn't work well, there is the option to fuse the gyroscope with the acceleration and magnetic sensors. This option, which uses a fusion of the acceleration, magnetic and gyroscope sensors via complementary filter to determine the rotation of the device, is far more reliable that the gyroscope sensor alone.
Gyroscopes measure the rotation of a device with a pair of vibrating arms that take advantage of what is known as the Coriolis effect, which is caused by the Earth's rotation. By measuring changes in the direction of the vibrating arms caused by a rotation and the Coriolis effect, an estimation of the rotation can be produced. The gyroscope is one of three sensors that are always hardware based (the other two are the magnetic and the acceleration sensors) on Android devices. In conjunction with the acceleration sensor, the gyroscope can be used to create other sensors like gravity, linear acceleration or rotation sensors.
If your device is equipped with Android 4.4 or higher, you *might* have the uncalibrated version of the gyroscope so you can see how drift affects the gyroscope sensor relative to the calibrated gyroscope.
Proximity Sensor Finder tells you a few things about your device:
1. Does the device have a proximity sensor?
2. Is an object in close proximity detected?
3. Does this device support actual proximity distances or just "covered" and "uncovered" sensor states?
4. For supported devices, exactly how far away is the object?
5. How long has the sensor been covered?
6. How much power is the proximity sensor consuming?
We developed Proximity Sensor Finder as an internal testing tool but it soon became apparent that there was a need in the market for just such an app, so we decided to ship it and make it free!
Internet and location permissions requested are just for ads, no other data is transmitted or received.
Make sure your touchscreen is clean before starting.
Touch your screen to turn the dark squares to white.
You can test by tapping or swiping your screen.
The app only tests down to a certain level of accuracy, i.e. the size of each square. This varies depending on the pixel density of your screen though it should be accurate enough for most phones.
Keep in mind that sometimes a single app might not always work on your specific device so it is best to test using multiple apps and comparing the results before sending your device off to repair!
** if a sensor is set as "NOT PRESENT" is because your phone doesn't have it **
- Ambient temperature in degrees celsius
- Percentage of moisture in the air
- Light intensity
- Air pressure
- Height above sea level
- widget with ambient temperature! more coming soon
** The data is read directly from the sensors could then have an error of up to 5-10% (in the worst case) that does not depend on me, but by the sensors, unfortunately I can not do anything about it, to try to reduce the errors Please keep the device on a flat surface for a few seconds, so that the values are optimized **
If you want to report the full compatibility of your device with the application please leave feedback or send me an email, so it will be added to the list, any feedback and comments are very much appreciated, the application aims to be simple and instant, to have at hand all the data from the main sensors of the phone, if there are suggestions, recommendations and requests for additions will be happy to provide (where possible)
1.1 added Google Analytics
1.2 added translation in:
1.2.1 fixed an orientation bug
1.3 added icons
1.3.1 bug fix
1.3.2 finally aviable first widget
1.3.3 added share functionality, fixed a bug with translation
1.3.4 fixed russian, widget 2x1
1.3.5 added imperial system ON/OFF menu option
1.3.6 fixed some translation, added version number, added option to change font
1.3.7 added inHg to imperial system
1.4 fixed widget, added notification, new accuracy (0s: Low -15s: Medium -45s: High)
1.4.1 fixed layout
1.4.2 fixed layout for medium font size
1.4.3 fixed a problem with font switch
1.4.4 battery usage should be 1/4 now
1.4.5 added greek and hungarian
1.4.6 added dutch
1.4.7 added settings menu, added notification kind
1.4.8 added fist start notification
1.4.9 divided option to have imperial system for temp/altitude/pressure
1.5 fixed translations, now you can select background color, now you can set text dimension and report translation error via mail from inside the app =)
1.5.1 some fixes, added material ActionBar/theme
1.5.2 fixed translations in ru/de, added text color option
1.5.3 added option to set pressure at nearest sea level, various fixes
1.5.4 bug fixes
1.5.5 bug fixes
Including accelerometer, magnetic field, orientation, temperature, light...
Version 3.5 added support for battery status (temperature, voltage and percentage), sound level and signal strength!
Perfect for showcasing capabilities of your new phone, as well as hardware diagnostics after you have gone through a system update or repair. And it's a must have development tool when you develop applications that uses these sensors.
The most popular screen on/off app. Reviewed by LifeHacker, MakeUseOf, TheNextWeb and many others ...
• Pocket Sensor: Turns the screen off if your phone is in your pocket.
• Table Sensor: Detects your phone is lying on a table and turn it off if not in use.
• Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by moving it.
• Keep Screen On by Motion: It keeps the screen on while you are watching the screen. It relies on the small movements of your hand while holding the device.
• Smart Lock support: It's a workaround to make the Smart lock feature work fine on devices with Lollipop.
• Locale plug-in for: Tasker, Llama and others
IN-APP PURCHASE FEATURES
• Wider range in Table Sensor
• Turn Screen On by Motion Timeout can be set above 15 minutes
• Exclude Apps option (except Lollipop): Gravity screen is paused while selected app is running
• Widgets, PowerToggles plug-in
VERSIONS: FREE vs. PRO vs. UNLOCKED by IN-APP PURCHASE (recommended)
In the Pro version:
• there is no 15 minutes limit for turning the screen on by motion.
• Table sensor can be set more precisely.
Unlocked version has everything what Pro has, plus it has:
• Exclude App list (except Lollipop)
• more advanced Delayed lock option
It should be not significant. I experienced about 6 per cent extra consumption on the test device. However it can be much higher by often using the Turn Screen On by Motion feature. Thus, keep your phone face down if you want to save energy.
Where is the Pro version? I cannot find it on Play Store
The Pro version is discontinued unfortunately, due to security reasons.
To change to the Unlocked version, please, do the followings:
- unlock the Free version by In-app Purchase
- send me the two purchase numbers or the two receipts you got from Google Play (Pro and Unlocked)
- and I'll refund the purchase of the Pro version
Sorry for the inconveniences.
- Automatic range re-adjustment.
- Show maximal and minimal values.
- "No sensor" message for devices without accelerometer.
- Display Z-axis acceleration.
- Low-pass filter to eliminate the force of gravity.
Screebl, the battery saver keep your screen on wunderkind, works based on a simple observation: we generally hold our phones or tablets in roughly the same positions when we're using them. Screebl uses the sensors in your mobile device to detect how you're holding it, and when your device is within a configurable range, the screen is kept on. Move out of that range, and Screebl releases the lock and the screen is allowed to go off. Using gravity, screen orientation, and other cues, your screen is kept on when it should be, and turned off when you don't need it. It's simple, but it works amazingly well!
How is Screebl a battery saver? Well, it's simple. On most phones, the screen is the single largest consumer of battery power. With Screebl running you can reduce the average amount of time that your screen is on by only keeping it on when you're ACTUALLY using your phone. The amount of savings can vary significantly by device and usage patterns, but it is not uncommon for users to see savings of 20% or more. See our web site for more details.
★ "Screebl is ingenious..." -- KnowYourMobile.com
★ "Screebl also helps you extend your battery life..." -- AndroidAuthority.com
★ "Screebl is a far more effective way to utilize our screen timeouts..." -- Android Spin.com
★ "Works out of the box..." -- AndroidTap.com
★ "Screebl offers an intelligent solution to the problem of screen control..." -- AndroidGuys.com
★ "Excellent customization..." -- Phandroid.com
✓ PocketLock locks your phone when you put it into your pocket, unlocks when you take it out
✓ AppExceptions let you turn Screebl off when selected apps are running in the foreground
✓ Locale Plug-ins and Tasker integration provide automated control and customization of Screebl
✓ Look-and-feel customization lets you make Screebl look the way YOU want
✓ Better detection algorithms
✓ Screen timeout set from Screebl
RECEIVE_BOOT_COMPLETED - Needed to a start Screebl when phone starts up.
INTERNET - Needed to check for new instructional videos and submit debugging information.
WAKE_LOCK - Needed to keep the screen on.
WRITE_SETTINGS - Needed to update system settings related to screen timeouts.
GET_TASKS - Needed to disable Screebl when selected apps are running (AppExclusions).
BILLING - Needed to allow in-app upgrade of Screebl Lite to Pro.
READ_PHONE_STATE - Needed to check phone state (e.g., in-call, speakerphone on, etc.) to provide in-call behavior (e.g., disable Screebl or lock screen on)
✓ Some phones do NOT deliver sensor events when the screen is off. Examples include some HTC phones, some Sony Xperia phones, and quite a few Motorola phones. PocketLock may not work properly on these phones. See this link for more info: http://www.saltwebsites.com/2012/android-accelerometers-screen-off
✓ PocketLock sometimes causes battery drain on some devices. The effect of the PocketLock feature varies widely from one device to another. The longer that you have PocketLock monitor for removal from your pocket, the more power used. Most devices see a minor increase in power consumption when using PocketLock (4-8%).
✓ Stillness detection doesn't detect small movements on some devices. A few devices have coarse-grained sensors, and movement is not detected well, causing unwanted stillness timeouts. I am working on a fix for this that will be in an upcoming release. Most phones are fine.
✓ Screebl doesn't start when the phone is powered-on. On some HTC phones the "fastboot" capability can cause problems with Screebl starting at power-on. I've done my best to fix this, but it still is a problem on some HTC devices. Screebl must NOT be moved to SD storage.
Graphical view of G-Force, orientation and inclination for a quick reading HUD style.
Sensors e Functions
* Ambient Temperature °C / ° F
* Relative Humidity
* Atmosferic Pressure
* Altimeter Mt / ft barometric / GPS
* Dew Point
* Magnetic Field
* Luminance lx / cd-ft
* G Force acceleration
* Flash torch
* Decibel Spl
Does your phone look too bright or too dull ?
Seeing non-uniform pixel distributions on the screen ?
Then Display Calibration is the app for you.
Display calibration analyzes your device's display , and calibrates the blacks(shades) and whites(tints) to give you a cleaner and smoother display.
-> Easy to use. You are just one click way from calibrating your display.
-> Step-wise , transparent calibration. You know exactly what is being done at each stage.
-> Optimized for faster calibration. Guaranteed to finish within 13 s.
• New interaction feature added (Read more about how to interact with graphics by clicking interact button)
• Large graphic view
• Speed in all direction(x,y,z) km,mph
• Total g-force
• Direction compass in degrees (n,w,s,e)
• Magnetic field x z y
• Total magnetic field
• Pitch and roll angles
• (speed sensitivity will depend on magnetic field around you, on the move accuracy)
• Control graphic speed rate
Have you ever wondered if your Android smartphone or tablet has a gyroscope sensor? Are you curious to know how fast your phone's accelerometer is or if your new phone has a barometer? What about the other sensors? This is the app for you.
Sensor Kinetics Pro is an advanced viewer, recorder and monitor for all of the standard sensors available in your Android device. Written by one of the pioneers in the use of accelerometers and gyroscopes within the modern smartphone, the app provides a comprehensive view of the total dynamics of the combined operations of all the sensors.
A sophisticated Chart Viewer for each sensor allows you to record the sensor's data in great detail. The Multi-Sensor Recorder records multiple sensors simultaneously at a controlled data rate. You can save and share the chart files and apply advanced filters and settings to test your sensors to the limit.
The app demonstrates the use of the accelerometer, gyroscope and the rotation sensor to control a tilt based view navigation like the RotoView technology by INNOVENTIONS. It also demonstrates the operation of the magnetic sensor, the linear acceleration sensor and the gravity sensor within special graphical displays.
Who Should Use Sensor Kinetics Pro?
Developers, students, hobbyists... anyone who's curious about what lies "under the hood" of their mobile device!
Test your Android phone or tablet: Sensor Kinetics Pro allows you to test all of the sensors on your device. Chart viewers allow you to measure any sensor over time and gauge their accuracy and behavior. You can change various settings to work your device to its limit.
Educational: The app demonstrates the physics of gravity, acceleration, rotation, magnetism and other forces as measured by your phone. It includes self contained and comprehensive help files with easy to understand information, plus experiments that you can perform with the sensors. Get hands-on knowledge of how these sensors interact with smartphones!
App Developers: Use Sensor Kinetics Pro to closely watch the behavior of the sensors used for an app, then save this data and share it with any PC via e-mail (.csv format). The data file can be opened in any popular spreadsheet program.
Research: Many researchers around the world use this app as part of their innovative work. Our users reported numerous applications in physics, engineering, behavioural sciences, medicine and more.
You can compare the performance of advanced sensors like the gyroscope, linear acceleration sensor and the rotation sensor. Gain a better understanding of the behavior of these sensors while you change the delay setting or activate/deactivate specific sensors, and apply advanced filtering.
Sensor Kinetics Pro relates to gyroscope, accelerometer, Android sensor, phone sensor, tablet sensor, tilt measure, pressure sensor, barometer, relative humidity sensor, light sensor, linear acceleration, temperature sensor, magnetometer, proximity sensor, gravity sensor, MEMS, kinetics.
No more slow, annoying fingertip scrolling. No more dirt smeared on your screen. Scrolling the old way using the touch screen takes many drag motions with your fingers to pan across an enlarged photo. RotoView image viewer ergonomically scrolls your large images much faster, using just one hand. Once you've tried it, "tilt-to-scroll" will become second nature.
RotoView Photo Viewer is simple to use! Just select any picture from your photo albums, double tap or pinch to magnify, and activate RotoView Smart Scroll with a gentle up-down shake. You can also start it with a long press anywhere on the screen, or with a tap on the area assigned to the unique scroll controller. Slightly rotate your phone and watch how smoothly and quickly you can view different areas of the magnified photo. Stop RotoView by a tap anywhere on the screen or by a gentle up-down shake.
The RotoView picture viewer uses the unique Throw and Glide rotation gestures to scroll your photos. The Throw gesture rapidly scrolls enlarged photos in response to the small rotations (tilting) of your phone. The Glide gesture follows the Throw gesture automatically with slower, more precise scrolling.
RotoView Photo Viewer works with all Android smartphones and tablets that have a gyroscope sensor or an accelerometer (G-Sensor).
• Simple, fast, and intuitive viewer with single hand scrolling
• Allows you to combine rotation and touch screen gestures
• The unique Scroll Controller guides you while viewing the magnified photo
• Works with all of your albums and photos
• Seamless integration with all other photo editors on your device
The app uses some of the same permissions of the stock Android "Gallery" app on which it is based. This is necessary in order to show your photo locations and access all the albums on your device. The RotoView section of the app makes no use of these permissions, and the app does not collect any personal data.
RotoView Photo Viewer is created by the company that invented and pioneered the tilt-to-scroll concept. Our developers are waiting for your comments. If you encounter a bug, please notify our tech support department at email@example.com. We look forward to improving our user interface with your suggestions.
RotoView Photo Viewer relates to picture, image and photo viewing, photo magnifier, photo magnifying, photo sharing and photo editing. This app uses the built in gyroscope and accelerometer sensors for ergonomic tilt-based scrolling.