- Gyroscope Sensor
Gyroscope sensor can measure six directions at a time. You will be able to see the effects immediately by rotating your phone slightly. Now Gyroscope sensor is mostly used in 3D game development, and possibly indoor navigation in future.
- Light Sensor
Light sensor is applied to detect the light intensity of the environment, and then adjusts screen brightness and determines whether to turn off the keyboard light. Test the effect by putting your phone in dark place and retrieving it.
- Orientation Sensor
Orientation sensor is applied to detect direction status of the device, i.e. auto rotate screen when device is rotated horizontally. It can also be used as measure equipment like Spirit Level.
- Proximity Sensor
Proximity sensor measures the distance between two objects, usually the device screen and our hands/face etc. Test the effect by moving your hand forward and backward in front of the device in Sensor Box for Android.
- Temperature Sensor
Temperature sensor provides information about your device temperature, thus you can take action when the temp is too low or high.
- Accelerometer Sensor
Accelerometer sensor is applied to detect device directions, i.e. auto rotate screen when the device is rotated vertically. It is also widely used in game development.
Sound detects the sound intensity around you and provides you detailed information about the intensity changes.
- Magnetic Field
Magnetic Field is used in many areas like metal detection and compass, which bring us lot convenience in our life.
Pressure is used to detect environmental pressure, thus to forecast weather and temperature.
Sensor Box for Android only detects changes. It may not show the correct temperature, proximity, light and pressure values if no changes occur.
For better performances, sensors are usually used together. Check out the live demonstration inside the application! Any feedback the email address below is the best way to get in touch with us.
You'll be able to test the following:
Accelerometer, gyroscope, compass, proximity sensor, pressure sensor... You'll be able to check which sensors are supported by your phone and all the information and values provided for each sensor.
You'll be able to check your LAN status: internal & external IP, gateway, DHCP server...
Signal, network type, external IP, SIM data...
You'll see the real data provided by the GPS: satellites, latitude, longitude, altitude, speed...
Level of charge, time on, temperature, health...
How many points of contact does your device recognize?
Information about hardware and software like CPU, RAM, kernel version, screen...
This app is similar to EVEREST or AIDA64, but apart from showing the components and system information, it also shows sensors readings.
The Pro version of Phone Tester displays more information (CPU speed, phone memory, sd card memory) and removes the ads.
Information about all sensors supported by your phone
Support for show information of WIFI networks and GPS
All data accompanied by graphics in real time
Collect on a single application: altimeter, metal detector, barometer, compass, thermometer ...
Sensors - Support for all Android sensors: gyroscope, compass, barometer, light sensor ...
Sensor Features - Features of each of the sensors on your smartphone.
Real Time - Real time information of the data obtained by Sensors.
WIFI - All data from the network which you are connected, intensity, and information about your Smartphone in the network.
GPS - You could see your geographical position, the altitude at which you are, and the status of the satellites.
Material Design - A clean and simple interface following the guidelines of Material Design.
Intuitive Graphs - Complete Graphs that let you view the data collected by the sensors.
- Automatic range re-adjustment.
- Show maximal and minimal values.
- "No sensor" message for devices without accelerometer.
- Display Z-axis acceleration.
- Low-pass filter to eliminate the force of gravity.
All sensors data are displayed:
· Health Conditions
· Altitude (using as altimeter the barometer sensor)
· Light Level
· Magnetic Field
· 6 different widgets that can display the time, date, temperature, and humidity
· Select the startup screen with the tab you prefer
· Lock the orientation of the app
· Set your preferred temperature unit (°C, °F, or K)
· Set your preferred altitude unit (meters or feet)
· Set your preferred pressure unit (mbar, mmHg, or inHg)
· Change the update rate of the widgets
· Read the info of each sensor (range, delay, power usage, and more)
Optimized battery consumption:
The sensors are used only while the application is running. Once you pause or exit the application all sensor listeners are removed. You can also customize the widget update rate to optimize consumption for your needs.
This application uses the ambient temperature and humidity sensors, which are currently included only in Samsung Galaxy S4 and Samsung Galaxy Note 3. The Galaxy S5 unfortunately does not have either a temperature or humidity sensor, however you can display the data of the rest of the sensors.
In case you need anything simply send us an email at email@example.com. Our friendly team is always here to assist you.
In addition, if you are not happy with the app or if the app doesn't work with your device just send us your order number and we will instantly refund you. We offer a lifetime return policy.
** models like Galaxy S3-S5 or Galaxy Note2-Note4 are missing temperature and humidity sensor, not my fault, sorry, the device manufacturer has decided to remove these sensors **
** if a sensor is set as "NOT PRESENT" is because your phone doesn't have it **
- Ambient temperature in degrees celsius
- Percentage of moisture in the air
- Light intensity
- Air pressure
- Height above sea level
- widget with ambient temperature! more coming soon
** The data is read directly from the sensors could then have an error of up to 5-10% (in the worst case) that does not depend on me, but by the sensors, unfortunately I can not do anything about it, to try to reduce the errors Please keep the device on a flat surface for a few seconds, so that the values are optimized, if your hands touch the device, the temperature will be too high of some degree **
If you want to report the full compatibility of your device with the application please leave feedback or send me an email, so it will be added to the list, any feedback and comments are very much appreciated, the application aims to be simple and instant, to have at hand all the data from the main sensors of the phone, if there are suggestions, recommendations and requests for additions will be happy to provide (where possible)
1.1 added Google Analytics
1.2 added translation in:
1.2.1 fixed an orientation bug
1.3 added icons
1.3.1 bug fix
1.3.2 finally aviable first widget
1.3.3 added share functionality, fixed a bug with translation
1.3.4 fixed russian, widget 2x1
1.3.5 added imperial system ON/OFF menu option
1.3.6 fixed some translation, added version number, added option to change font
1.3.7 added inHg to imperial system
1.4 fixed widget, added notification, new accuracy (0s: Low -15s: Medium -45s: High)
1.4.1 fixed layout
1.4.2 fixed layout for medium font size
1.4.3 fixed a problem with font switch
1.4.4 battery usage should be 1/4 now
1.4.5 added greek and hungarian
1.4.6 added dutch
1.4.7 added settings menu, added notification kind
1.4.8 added fist start notification
1.4.9 divided option to have imperial system for temp/altitude/pressure
1.5 fixed translations, now you can select background color, now you can set text dimension and report translation error via mail from inside the app =)
1.5.1 some fixes, added material ActionBar/theme
1.5.2 fixed translations in ru/de, added text color option
1.5.3 added option to set pressure at nearest sea level, various fixes
1.5.4 bug fixes
1.5.5 bug fixes
- Enhance your device by opening up the hood!
- Even the most basic devices have an accelerometer, magnetic field, orientation, and light sensors.
- Gain functionality and precisely measure the world around you.
accelerometer, magnetometer, gyroscope, orientation, light, pressure, thermometer, proximity, gravity, linear acceleration, rotation, relative humidity
no ads or in-app purchases
simple, clean and colourful user interface
- get extra information such as range and resolution
- record sensor values to monitor changes over time
SENSORS (availability depends on device):
- Geomagnetic Field
- Linear Accelerometer
- Rotation Vector
SPECIAL THANKS TO:
- http://icons8.com/ for the launcher icon
Most sensors also display a chart with the output of the sensor so you can monitor changes during the time.
You can even capture the values and export them to your computer with a csv file or view them directly in the app.
Sensor Sense give you access to:
• Environment sensors
- Relative humidity
• Motion sensors
- Linear acceleration
- Rotation vector
• Position sensor
- Magnetic field
- Longitude, latitude and altitude
- Speed and accuracy
- Level, voltage and temperature
- Status and health
Sensor Sense combines all these features with a beautiful Material Design with Cards.
Note: not all devices may contain all these sensors.
"Light Sensor" is a simple to use app to measure light illuminance in flux as well as foot-candela using ambient light sensor of your device.
★ Distinct features of this light sensor ★
* Light illuminance measurement in lux and foot-candela
* 5 sec timer to allow you to take light measurement
* No battery drainage whether app is running or minimized to background
* Calibration feature to make minor adjustments to measured value
* Fast response time
Accuracy of the light sensor may vary on different devices.
Make sure light sensor is facing the light source to get correct reading.
★ Coming soon ★
* Ability to save measurement(s) with notes
Keywords: Light Sensor, Light Meter, Lux, Candela
• New interaction feature added (Read more about how to interact with graphics by clicking interact button)
• Large graphic view
• Speed in all direction(x,y,z) km,mph
• Total g-force
• Direction compass in degrees (n,w,s,e)
• Magnetic field x z y
• Total magnetic field
• Pitch and roll angles
• (speed sensitivity will depend on magnetic field around you, on the move accuracy)
• Control graphic speed rate
Including accelerometer, magnetic field, orientation, temperature, light...
Version 3.5 added support for battery status (temperature, voltage and percentage), sound level and signal strength!
Perfect for showcasing capabilities of your new phone, as well as hardware diagnostics after you have gone through a system update or repair. And it's a must have development tool when you develop applications that uses these sensors.
Proximity Sensor Finder tells you a few things about your device:
1. Does the device have a proximity sensor?
2. Is an object in close proximity detected?
3. Does this device support actual proximity distances or just "covered" and "uncovered" sensor states?
4. For supported devices, exactly how far away is the object?
5. How long has the sensor been covered?
6. How much power is the proximity sensor consuming?
We developed Proximity Sensor Finder as an internal testing tool but it soon became apparent that there was a need in the market for just such an app, so we decided to ship it and make it free!
Internet and location permissions requested are just for ads, no other data is transmitted or received.
Check which sensors are available and what they meassure. Useful for all developers, but also for everyone who wants to test the device's sensors.
Sensors: Accelerometer, Magnetic Field, Gyroscope, Light, Pressure, Proximity, Gravity, Linear Acceleration, Rotation Vector, Orientation, Relative Humidity, Temperature and Ambient Temperature.
Additional you can also check some more interesting device information about your Display, Hardware, Software, Battery, Memory,...
In portrait and landscape mode.
Don't hesitate to give a feedback. Please write an email if you got any problems.
You can purchase the new and improved Sensor Insider Pro for only $2.49 for a limited time.
Sensor Insider Pro's main features
- Acquire data from multiple sources simultaneously.
- Display data in different ways (plots, map, numeric)
- Take screenshots of your plots
- Save acquisition info and data to file, which can be reopened for further analysis.
- Export data to file in Matlab, CSV (Excel-compatible), or KML (for Google Earth) format, for further analysis on a computer.
- All "standard" sensors (acceleration, magnetic field, light,...)
- GPS and network location
- Sound level
- Phone and WiFi signal (data availability varies by phone)
- System resources
Your ratings are very appreciated. If you are experiencing any issue, please contact us and give us a chance to solve them before rating.
Sensor Kinetics is an advanced viewer and monitor for all of the standard sensors available in your Android device. The new built-in Multi-Sensor Recorder allows you to record up to six kinetic sensors simultaneously.
Written by one of the pioneers of the use of accelerometers and gyroscopes within the modern smartphone, it provides a comprehensive look at the total dynamics of the combined operations of all the sensors.
The app demonstrates the use of the accelerometer, gyroscope and the rotation sensor to control a tilt based view navigation like the RotoView technology by INNOVENTIONS. It also demonstrates the operation of the magnetic sensor, the linear acceleration sensor and the gravity sensor within special graphical displays.
Use Sensor Kinetics to monitor and understand the behavior of the sensors while you change the delay setting or activate/deactivate specific sensors. Each sensor is attached to a sophisticated chart viewer. The Multi-Sensor Recorder records multiple sensors simultaneously at a controlled data rate. If you need to save or share sensor charts, please purchase the companion Sensor Kinetics Pro.
For educational users, the app includes comprehensive help files which provide physics students with hands-on knowledge of how these sensors interact with smartphones and suggest numerous experiments you can perform on your phone or tablet.
Who Should Use Sensor Kinetics?
Developers, students, hobbyists, technicians, engineers... anyone who's curious about what lies "under the hood" of their mobile device!
Test your Android phone or tablet: Sensor Kinetics allows you to test all of the sensors on your device. For example, you can quickly determine if your Android device has a gyroscope sensor and how fast it's operating. The numerous chart viewers allow you to measure any sensor over time and gauge their accuracy and behavior.
Educational: Sensor Kinetics demonstrates the physics of gravity, acceleration, rotation, magnetism and more as these forces are measured by your phone or tablet. The app includes comprehensive help files with easy to understand information and experiments you can perform with the sensors.
App Developers: View in detail the behavior of the sensors used in your apps. Compare the performance of advanced sensors like gyroscope, linear acceleration sensor and the rotation sensor.
This app relates to gyroscope and accelerometer data logging, magnetometer, smart scroll, science, physics, tilt measure, pressure sensor, relative humidity sensor, light sensor, linear acceleration, temperature sensor, proximity sensor, gravity sensor, MEMS, kinetics
No more slow, annoying fingertip scrolling. No more dirt smeared on your screen. Scrolling the old way using the touch screen takes many drag motions with your fingers to pan across an enlarged photo. RotoView image viewer ergonomically scrolls your large images much faster, using just one hand. Once you've tried it, "tilt-to-scroll" will become second nature.
RotoView Photo Viewer is simple to use! Just select any picture from your photo albums, double tap or pinch to magnify, and activate RotoView Smart Scroll with a gentle up-down shake. You can also start it with a long press anywhere on the screen, or with a tap on the area assigned to the unique scroll controller. Slightly rotate your phone and watch how smoothly and quickly you can view different areas of the magnified photo. Stop RotoView by a tap anywhere on the screen or by a gentle up-down shake.
The RotoView picture viewer uses the unique Throw and Glide rotation gestures to scroll your photos. The Throw gesture rapidly scrolls enlarged photos in response to the small rotations (tilting) of your phone. The Glide gesture follows the Throw gesture automatically with slower, more precise scrolling.
RotoView Photo Viewer works with all Android smartphones and tablets that have a gyroscope sensor or an accelerometer (G-Sensor).
• Simple, fast, and intuitive viewer with single hand scrolling
• Allows you to combine rotation and touch screen gestures
• The unique Scroll Controller guides you while viewing the magnified photo
• Works with all of your albums and photos
• Seamless integration with all other photo editors on your device
The app uses some of the same permissions of the stock Android "Gallery" app on which it is based. This is necessary in order to show your photo locations and access all the albums on your device. The RotoView section of the app makes no use of these permissions, and the app does not collect any personal data.
RotoView Photo Viewer is created by the company that invented and pioneered the tilt-to-scroll concept. Our developers are waiting for your comments. If you encounter a bug, please notify our tech support department at firstname.lastname@example.org. We look forward to improving our user interface with your suggestions.
RotoView Photo Viewer relates to picture, image and photo viewing, photo magnifier, photo magnifying, photo sharing and photo editing. This app uses the built in gyroscope and accelerometer sensors for ergonomic tilt-based scrolling.