This is the companion (and installer) app for Dashboard for the Pebble smartwatch.

All toggles can now be re-ordered using the Android app, and will update on the watch in realtime.

You can also schedule a toggle to occur at regular intervals using the Pebble Wakeup API by holding Select.

Note: Due to the absence of a an API, I am unable to incorporate the following into the app as a toggle. If you know of an API, please let me know!
- GPS
- Flight Mode

Using it you can control:
- Wi-Fi
- 3G/4G Data
- Bluetooth
- Ringer mode
- AutoSync
- Wi-Fi Access Point (Tethering) mode
- 'Find phone' sound
- Lock Screen (after granting Device Admin status)
- Auto brightness

You can also view:
- Network name
- Phone battery level

Pebble Rocker is an ever-growing collection of Pebble Watch apps that work in conjunction with your Android device to enhance your Pebble smart watch.

Included Watch Apps
- Android Settings: View & change Android settings from your watch.
  - Battery Level: view Android battery level and receive low battery notification (optional).
  - Ringtone: view/change state (silent/vibrate/normal) and volume.
  - Media Volume: view/change media volume.
  - Wifi: enable/disable wifi.
  - Bluetooth: enable/disable bluetooth.
- Chopper (Game): See how long you can navigate the Chopper through the perilous caverns.
- Camera Control: Use your Pebble watch to take photos with your phone.
  - Use your Pebble watch to take photos with your phone.
  - Take an instant photo or use a timer from 5-30 seconds.
  - Turn flash on/off/auto from your Pebble.
  - Switch between rear/front camera from your Pebble.
  - Turn camera sounds on/off from your Pebble.
  - Automatically preview taken photo on your watch.
- Facebook: browse your Facebook feed on your Pebble watch.
  - View feed entry picture (the picture associated with a status update / wall post).
  - View feed entry comments.
- Foursquare: find nearby venues and check in from your Pebble watch.
  - Check in directly from your watch.
  - Check in options: private, public, Facebook, & Twitter.
- Twitter: browse your home timeline on your pebble watch.
- Events: find activities in your area such as music, community events, conferences and more.
- Photos: browse your Android photo gallery on your Pebble watch.
  - Configure how your photos are converted for viewing using five adjustable filters.
  - Configure which folders are searched for photos.
- Tip Calculator: quickly calculate 10, 15 and 20% tips (including totals) when dining out.
- Phone Pager: use your Pebble watch to find your misplaced Android device (or use your phone to find you watch).
  - Ringtone: selectable ringtone and adjustable volume.
  - Vibrate: vibrate the phone when being paged.
  - Strobe Light: strobes the camera flash when being paged (may not work on older devices).
  - Page your Pebble watch from you phone (vibration / backlight).
- App Bundles: multiple options for Utilities and Social bundles to save app slots.

Permission Breakdown
- Read / Write External Storage: used to install apps to Pebble watch and log Pebble Rocker errors.
- Camera / Flashlight: used by Phone Pager to create strobe light and Camera Control to take pictures.
- Record Video / Audio: used by Camera Control to record video (with sound).
- Disable Keyguard: used by Phone Pager and Camera Control to turn on screen (for legacy devices).
- Vibrate: used by Phone Pager to vibrate phone when being paged.
- Network Communication: used by Facebook, Foursquare, Twitter & Events apps. Also used for Analytics (can be disabled).
- Location: used by Foursquare & Events to find nearby venues.
- Access Wifi State / Change Wifi State: used by Android Settings to manage wifi state.
- Bluetooth / Bluetooth Admin: used by Android Settings to manage wifi state.

As of version 0.3, it features 5 applets :

- Weather : 7-day weather forecast
* OpenWeatherMaps
* Yahoo! Weather
- SMS :
* Full access to your SMS Inbox
* Answer with canned messages
- Agenda : Upcoming Agenda events (Android 4.0+ only)
- Utils applet :
* Phone battery and network info
* Find my phone
* Remote camera shutter
* Request weather data refresh
- Any.DO : Browse your tasks from your Pebble

This application will let you browse your content quickly and smoothly with a list based UI and complete detail screens.
Unlike most other watchapps, content is not limited to a few recent items, but is streamed to your watch on the fly.

The application is translated in english and partially in french.

The application is built in a very extensible way and more applets will be added based on your feedback, so feel free to tell me which content you would like to see on your Pebble !

If you encounter any issue, write at alexd6631@gmail.com for support.

Official forum : http://forums.getpebble.com/discussion/7551/android-pebbleapps-7-day-weather-full-sms-inbox-agenda

This is an application that lets you send all notifications to your Pebble smartwatch. You can exclude certain applications or exclude all save a few.
For basic troubleshooting steps (like if you can't get notifications to send), please visit: https://github.com/dattas/pebble-notifier/wiki/Troubleshooting

This is also bridge between the Pebble application and Tasker. It will let you send notifications of your making to your Pebble. Simply fill out the title and body of the message you want sent to your Pebble and off you go!

Get the source code and contribute at: https://github.com/dattas/pebble-notifier

Please note I am not affiliated with Pebble or Tasker, but am a huge fan of both products!

This application adds an entry to Android's share menu, this allows you to easily send text to the Pebble.
Why is this useful? That depends on your usage, it might not be useful at all! With this, you can pin text to the Pebble without an app on the Pebble that would take a watchapp slot.

How does this work?
The text is sent as a notification to the Pebble, so it uses the internal notifications app. Clicking any button on the Pebble will naturally dismiss the text.

You'll need to Allow notifications while screen is on in the Pebble app.

Users running older versions of Android (2.2 or 2.3) will also be able to use httpebble enabled apps with Pebble Connect.

The source code can be found on GitHub at https://github.com/lkorth/httpebble-android

Choose three tasks to activate anytime without taking your phone out of your pocket. Have these tasks change based on Tasker profiles. Want to access navigation tasks while driving, but also have home automation tasks while at home? Need more than three tasks? Chain tasks together or take advantage of the 20-task secondary menu (by holding the middle button). Program PebbleTasker to open up or close based on Tasker events, so that your three tasks are ready to be used as soon as you get in your car or get home.

REQUIRES TASKER BY CRAFTY APPS. Make sure you have Tasker installed before installing PebbleTasker.
Also requires latest Pebble firmware. Check the firmware inside the Pebble app if you have any issues.

Link to Tasker: https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm

INSTRUCTIONS: Inside Tasker, go to the Preferences menu, and under the Misc tab, make sure "Allow External Access" is enabled.

Tasker must already be installed before installing this app. If PebbleTasker still doesn't work, please uninstall and reinstall the app.

If you're getting a "Loading..." screen that won't go away, you need to update your Pebble's firmware to the latest version. Check inside the Pebble app under the 3-dot menu for the "Check for FW Update" option. If you're running the latest version, restart the watch by pressing the middle button for more than 10 seconds, and toggle the Bluetooth on your phone. That should fix it.

PLEASE CONTACT ME BEFORE LEAVING A REVIEW IF YOU'RE NOT COMPLETELY HAPPY! I will do my best to try to solve whatever issues you are having so that you can enjoy the app to its full potential!

-----------------------------
Changes in 1.4:

New Tasker plugin:
- Now custom tasks are separate from the default ones, allowing one to restore to a default menu with much ease through Tasker.
- You can now open AND close the watch app through Tasker.
- The plugin now shows a more useful description for the specific action.

- New tasks menu! Supports up to 20 tasks. This will be improved as the Pebble API gets more mature. Loading a short menu can be quick, but loading a full 20-task menu may take up to 10 seconds. Press and hold the middle button to activate.
- Tasks can now be renamed for the Pebble's screen.
- Press-and-hold actions for the top and down buttons can now be assigned to separate tasks.
- You can now choose to close the watch app after executing a certain task.
- Ability to close the watch app if it hasn't been used for a while (3 minutes of no data communication).
- Enabled support for populating the Glance Tasker menu with the main three tasks from PebbleTasker. This is useful if you use Glance, but don't want to set up intents through Tasker. This feature is beta!

PBW developed with cloudpebble.net

Tested on Android 4.1. Should work with Android 2.3 and above.

Source on github.com/ruqqq

Wear Phone is the missing piece in handling phone calls on your Android Wear smart watch. Without this application, you could only answer or ignore incoming calls (as well as reply with canned replies). With this application, you get the following features:

* End ongoing calls.
* Enable/disable speakerphone.
* Enable/disable microphone.
* Start outgoing calls from your recents, favourites, your full contact list, or a keypad!

We believe that input on a smart watch needs to be different when it's not by voice, so the keypad is a new experiment we hope you enjoy.

This has only been tested on a Moto 360, please report any issues you find with square faces or the different DPI of the G Watch R before leaving a negative review.

If the app does not work properly on square watches or the G Watch R, please contact the developer for support. If the issue is not fixed, we will happily refund your purchase.

Features:
-> Single Tap - See Username, User profile picture and No of Likes of Current Post.
-> Long Press - To Like Current Post.
-> Double Tap - Zoom Photo (Pinch Zoom also Support).
-> Swipe Left - See comments of Current Post.
-> Swipe Down - See Next Post.

Notes:
-> Make Sure Internet is on and watch is connected with Mobile.
-> Open Mobile Application and once log in First with Instagram Username and password.
-> Now Open Wear For Instagram Application on your watch.

If Application is not in application list than open Android wear application on mobile click on setting icon and click Resync apps.
Wait and check.

If you find any bugs or you have any suggestions, please email me at jigneshdkheni@gmail.com in order to correct or implement it before rating.

The Wear App Launcher lets you browse and launch your Android Wear apps by simply swiping the left edge of your screen to bring up the launcher, showing you all the applications currently installed on your Android Wear device.

----------------------------------------------------------------------------------------
To start using it on your watch the very first time, open "Wear App Launcher" manually from your regular application list on your watch, this opens up the launcher and also registers the left side swipe-area for future launches.
----------------------------------------------------------------------------------------

- Optimized for round displays
- Optimized for square/rectangular displays
- Choose how your applications are presented (2 or 3 columns)
- Change the order of your apps
- Open the Wear App Launcher by simply swiping from the left edge of your screen*
- Low memory/battery usage, the Wear App Launcher is only started when you swipe to activate it.
- Customize the swipe-area size
- Switch between multiple running apps

After installing the Wear App Launcher, please run it on your phone for a quick introduction to getting the most out of your new Android Wear application launcher.

On your watch, you only have to start "Wear App Launcher" manually the very first time after installing or upgrading it, after running it the first time, the left side swipe-area will always remain active, even when you restart your watch (about 30 sec. after boot).

Enjoy your new Android Wear Launcher.

WAM was the first app manager for Wear and is still the best! But don't just take our word for it:

"Some of the apps on your phone have Wear modules, but which ones? And what the heck do they do? Wear App Manager lists them all in one handy place." - Android Police

"Wear App Manager takes the guesswork out of the equation" - re/code

"It’s boring having to scroll through hundred of other apps from the settings menu. Enter Wear App Manager, a slick and easy way to see what’s taking up what on your wearable" - Android Headlines

"It’s a potentially useful tool and even more so if you’re a new Android Wear owner." - Android Authority

In addition to bringing all your Wear apps together in one place, this version includes the following:
▶ Notifications (on your watch, handheld, or both) when Wear apps are installed, updated, or uninstalled
▶ Permissions each app is actually using on your wearable
▶ Storage space available on-device, and how much each app is using - in more detail than that shown by the Android Wear app.
▶ Direct links to uninstall the app, or open its listing on Google Play
▶ Uninstall multiple apps at once
▶ Share app details or lists with friends
▶ Launch apps (on watch or handheld) easily
▶ Shows apps installed only on watch (in development, or sideloaded), and those whose watch components are missing
▶ Sort app list by name or size
▶ Lots of geeky internal details about each app, like version codes and install dates

Please note: This is still an early release of WAM, and gets your foot in the door of managing your Wear apps. Many more features are coming soon!

Android Wear Watch will buzzing to stop you from going out from your phone.

Can find your phone? Just tap on notification or start Find My Phone app on your watch and tap on the button to launch alarm and visual signals on your phone (even if it’s in silent mode).

The alarm can be setting up for your needs. You can:
- Set alarm volume
- Turn on gradual volume increasing
- Turn on vibration
- Select ringtone
- Set screen brightness
- Turn on Flashlight

The main functionality available for free, but some alarm customization features available only in PRO version, that can be purchased in app (price is $1,99).

WARNING: Behavior not tested on encrypted or rooted devices. Use at your own risk.

**
While the app let's you install this on Android 5.0+ (Lollipop) devices, it is recommended that you use the built-in "Trusted Device" feature of Lollipop instead of Wear Unlock.
**

Once you have paired your Android Wear device to this app, it will lock your device with a specified password when your Android Wear device has been disconnected - and unlock your device whenever your Android Wear device is connected.

- Only PIN and password lock modes are supported at this time.
- The developer takes no responsibility for the security of your device while Wear Unlock is installed.

Remote control for your phone from your Pebble!

This is a simple program, it will broadcast an intent when a button on the Pebble Remote app is pressed. The following intents will be broadcast:
app.mathieson.ButtonTextWithoutSpaces
app.mathieson.ButtonTextWithoutSpacesLONG (3 button screen only)
app.mathieson.TAP
app.mathieson.APPCLOSED

Also you can detect the intent this way:
app.mathieson.PebbleRemote
And this intent will carry with it two extras:
"button" - a string extra with the button name
"long" - a boolean, true if the button press was a long button press (always false in menu mode)

You can listen for these using Tasker, Automagic, etc. to create your own profiles and conditions on the phone. You can also set the names of the buttons on the app as well.

If you have any ideas on how to improve either the watch app or the android app please let me know! Also if you want this translated to your language then by all means just send me the strings and I will add the translation.

The app can be controlled using the following intents:
app.mathieson.STARTAPP
app.mathieson.CLOSEAPP
app.mathieson.VIBRATE
app.mathieson.SETNAMES
app.mathieson.GOTOWATCHAPP (any app)

Please see the Advanced Help to know more on how to use the app.
The advanced help can be found here:
http://199.195.250.250/PebbleRemoteHelp.html

Thanks to Patrick Simonds for all the great ideas and bug reports!