Wear Phone is the missing piece in handling phone calls on your Android Wear smart watch. Without this application, you could only answer or ignore incoming calls (as well as reply with canned replies). With this application, you get the following features:
* End ongoing calls.
* Enable/disable speakerphone.
* Enable/disable microphone.
* Start outgoing calls from your recents, favourites, your full contact list, or a keypad!
We believe that input on a smart watch needs to be different when it's not by voice, so the keypad is a new experiment we hope you enjoy.
This has only been tested on a Moto 360, please report any issues you find with square faces or the different DPI of the G Watch R before leaving a negative review.
If the app does not work properly on square watches or the G Watch R, please contact the developer for support. If the issue is not fixed, we will happily refund your purchase.
The Wear App Launcher lets you browse and launch your Android Wear apps by simply swiping the left edge of your screen to bring up the launcher, showing you all the applications currently installed on your Android Wear device.
To start using it on your watch the very first time, open "Wear App Launcher" manually from your regular application list on your watch, this opens up the launcher and also registers the left side swipe-area for future launches.
- Optimized for round displays
- Optimized for square/rectangular displays
- Choose how your applications are presented (2 or 3 columns)
- Change the order of your apps
- Open the Wear App Launcher by simply swiping from the left edge of your screen*
- Low memory/battery usage, the Wear App Launcher is only started when you swipe to activate it.
- Customize the swipe-area size
- Switch between multiple running apps
After installing the Wear App Launcher, please run it on your phone for a quick introduction to getting the most out of your new Android Wear application launcher.
On your watch, you only have to start "Wear App Launcher" manually the very first time after installing or upgrading it, after running it the first time, the left side swipe-area will always remain active, even when you restart your watch (about 30 sec. after boot).
Enjoy your new Android Wear Launcher.
You'll be able to select from a list of all the apps that you have installed. Once you select an app, you'll be able to add a series of pauses and vibrations for that app.
NOTE: This app sends the vibration pattern AFTER the normal notification. If you only want the custom notification you can block notifications from that particular app in the Android Wear app, but then you'll only get the vibration pattern and not the actual notification on your wear device.
ATTENTION - Instructions:
-Make sure your mobile is compatible with Wear.
-Make sure to pair your phone with Wear with the Wearable App.
-Ones you install the App with a pair Wear the "Wear Calc" would automatically install in your watch.
-To open: Go to "Start..." and open the app "Wear Calc" (Voice Action to open may not work)
-You CANNOT OPEN the app in your mobile after install it, only on your Wear Device.
Compatible with all square wear devices.
Emails us to improve this app and/or to request new functions.
instantly without taking your phone out of pocket.....!!!
Leave your phone in your pocket or bag. View everything on your wrist.
-> Single Tap - See Username, User profile picture and No of Likes of Current Post.
-> Long Press - To Like Current Post.
-> Double Tap - Zoom Photo (Pinch Zoom also Support).
-> Swipe Left - See comments of Current Post.
-> Swipe Down - See Next Post.
-> Make Sure Internet is on and watch is connected with Mobile.
-> Open Mobile Application and once log in First with Instagram Username and password.
-> Now Open Wear For Instagram Application on your watch.
If Application is not in application list than open Android wear application on mobile click on setting icon and click Resync apps.
Wait and check.
If you find any bugs or you have any suggestions, please email me at firstname.lastname@example.org in order to correct or implement it before rating.
• Playback and volume controls
• Change track from queue
• Group/Un-group players.
• After installation, you must launch the application on your regular device at least once to ensure the connection between the wearable and the device is established.
• Requires your phone to be connect to the same WiFi as your Sonos system.
• Tested on Sony Smartwatch 3, LG G Watch R and the Moto 360.
Have a bug report or feature request? Just find the issue or file a new one here:
WARNING: Behavior not tested on encrypted or rooted devices. Use at your own risk.
Once you have paired your Android Wear device to this app, it will lock your device with a specified password when your Android Wear device has been disconnected - and unlock your device whenever your Android Wear device is connected.
- Only PIN and password lock modes are supported at this time.
- The developer takes no responsibility for the security of your device while Wear Unlock is installed.
Requires an Android Wear device and an internet connected phone.
Important: Your phone and wear device must be set to English since the app translates from English to other languages.
A voice to voice translator, this app can translate sentences from English to any of the following languages:
Please note that your phone's text to speech engine must also support the language you wish to translate to, open the companion app in your phone to see which languages your phone supports.
Note: The Google wear watches do not have speakers so the app uses your phone's.
Your phone's screen does NOT have to be on, and the app does NOT have to be opened in your phone, the app is also not running in the background so it won't consume your phone's battery.
How To Use:
- Watch the video for how to use.
- To add symbols, for example to add a question mark say "question mark" whenever/wherever you want the "?" to appear.
- If you wish to continue using the same language you do not have to say "to " at the end once you have said it.
- You may also start the translation service by clicking the "New Translation" button, at the "Speak Now" prompt say the words you want to translate followed by "to "
- If you can't hear anything check that your phone's Media volume, not just Ring volume, is up. (See last screenshot photo)
- A "Can't reach Google at the moment" message means that Google's servers are not working not that the app is not working, the app uses Google voice-to-text service. As a Wear user myself I find that these happens quite often and is disappointing but there is nothing I can do to fix it on my end so please do not leave a bad rating, thanks.
Updates: We will continue to issue updates as the user base grows, we have many features coming up this including voice pitch, text to speech engine selection, male and female voice,and support for many more languages both as input and output.
• Just after an intensive sport session, you might want to count your heartbeat.
• Can be used by musician and DJ to calculate the tempo (quadruple measure) of a song.
• You want to know if you are born with the rhythm.
Round and square screens are supported.
HOW TO USE IT
• Press anywhere repeatedly to measure the BPM
• Wait two seconds and Touch again to start a new measurement
• Long press to quit
Wait 10 to 20 seconds after install in order to be able to launch this application.
If it is still not available, "Resync apps" or uninstall and then re-install it again, and be sure to have enough free space.
All you have to do is launch the app on your wear and click on a single button. The app will then do the work within milliseconds !
The app supports both Squared and Round Android Wear Smartwatches (Moto 360, LG G Watch, Gear Live ... )
Note: This app is only for Android Wear Devices.
Reviews and feature requests are welcomed
In addition to bringing all your Wear apps together in one place, this version includes the following:
▶ See what permissions each app is actually using on your wearable
▶ See storage space available on-device, and how much each app is using - in more detail than that shown by the Android Wear app.
▶ Direct links to uninstall the app, or open its listing on Google Play
▶ Share app details with friends
▶ Launch apps (on watch or handheld) directly from WAM
▶ See apps installed only on watch (in development, or sideloaded), and those whose watch components are missing
▶ View apps sorted by name or size
Please note: This is still an early release of WAM, and gets your foot in the door of managing your Wear apps. Many more features are coming soon!
StayLit Wear lets you adjust the time until the display goes dark after the watch has been waked (i.e. the time the display stays on after you have tapped the screen, moved the watch, or pressed the button). Choose from a range of values of up to 60 seconds.
USAGE: After installing the app on your phone, please allow approx. 45 seconds for the app to be pushed to your watch. (Upon successful installation, the app will show up in your phone's Application Manager window - see below). In order to adjust the backlight timeout, open the StayLit Wear app on your watch (by tapping the watchface screen, scrolling down the list that appears until the end, and selecting the entry "Start...“.) This will bring up the Longer Backlight settings. Select a setting in the list by tapping on it. Deactivate StayLit by selecting "off“ in this list. (NOTE: Due to an issue with Wear 5.0, on some devices, it may be necessary to re-select the desired light timeout each time you change the watchface.)
INSTALLATION TROUBLESHOOTING: After having been installed on the phone, the app should show up in the phone's Application Manager (in Settings > Options). However, it does not show up in the phone's app drawer (since all settings are done on the watch). On the watch, the app should show up in the Start... menu. If you are having problems installing or running the app, please contact me - I will be happy to help!
NOTE: Setting a significantly longer backlight timeout will reduce battery life. We recommend switching the display’s "Always On" mode to "Off“ (available through long-pressing the watch's button) while using StayLit Wear with a longer backlight timeout. (However, a few seconds of backlight more do not affect battery life greatly, and will already make watchfaces more enjoyable - especially animated ones...)
OK Google... open net info.
Now you can check the network details of your handheld without taking your phone out of your pocket.
• wifi state: connected/not connected
• wifi name (SSID)
• wifi speed
• Mobile state: connected/not connected
• Mobile operator
• Mobile type connection
Please note: an Android Wear device is needed!
For all kinds of issue do not hesitate to contact me.
Amazing nixie tube imagery for Android Wear.
It has beautifully expressed the reflection of light on the floor.
You will be deprived eyes to the beauty of the Nixie clock in the dark.
You can customize 12H/24H from Handheld app.
Enjoy this timeless game with tons of free puzzle packs--food, instruments, geography, romance and more! From hipsters to history there is a game for everyone!
+ HD Graphics
+ Classic word search gameplay
+ Highlight words forward and backward
+ Unlimited random puzzles!
-Tap or drag cards
-Over 50 solitaire games
-Play in both portrait and landscape mode
-Crisp, clean graphics and easy to use controls
**Default Solitaire game is Klondike
Complete list of game types: Acme, Alhambra, Alternations, Auld Lang Sync, Aunt Mary, Baker’s Game, Batsford, Beleaguered Castle, Blind Alleys, Blockade, Brigade, Busy Aces, Canfield, Capricieuse, Carlton, Carpet, Castles in Spain, Congress, Corona, Courtyard, Diplomat, Double Klondike, Double Rail, East Haven, Eight Off, Fan, Flower Garden, Fortress, Fortunes Favor, Forty and Eight, Forty-Nine, Forty Thieves, Freecell, Gargantua, Giant, King Albert, Kingdom, Klondike, Klondike - by threes, Lady Palk, Legion, Limited, Lucas, Maria, Martha, Midshipman, Milligan Harp, Napoleon’s Exile, Number Ten, Octagon, Raglan, Red and Black, Royal Aids, Russian Solitaire, Scotch Patience, Single Rail, Somerset, Spider, Spider - One Suit, Spider - Two Suits, Squadron, Steps, Stonewall, Streets, Streets and Alleys, Tam O’Shanter, Thirty-Six, Tri-Peaks, Triple Line, Waning Moon, Westcliff, Whitehead, and Yukon
-Notes, undo, and redo functions
-3 difficulties- Easy, medium, and hard
-Game Services Leaderboard and Achievements
-Easy to use interface, with buttons that are easy to tap and read
-Game is automatically saved
Download now and see why sudoku is one of the most popular games in the world!
-Easy, medium, and hard difficulties
-Real sudoku puzzles with one unique solution
-Undo, redo, and hints
-Easy to use interface
-Saves your game automatically
-Leaderboards and Achievements so you can play against your friends
-Tap or drag cards
-Game Services Leaderboards and achievements
-Draw 1 or 3 cards
-Play in both portrait and landscape mode
-Crisp, clean graphics and easy to use controls
-Smooth animations (with fun win animation:)
Calculator for Free is the best free calculator app available. It includes all the functions you need, and none of the ones you never use. Add, subtract, multiply, and divide with ease! You can also work with negative numbers and use the percent function for all of your percentage needs. Easy to read, large font and oversized buttons make it easy to use, and the crisp graphics mean you will never get tired of looking at it! Both portrait and landscape orientation are supported for your convenience.
Your search stops here-- Download Calculator for Free now, and never use another calculator again!
Flashlight Buddy is a simple, powerful, no frills flashlight that will light your way when it's too dark to see.
-Simple, single button layout
-No confusing modes or unnecessary options
-Super bright illumination
-Loads fast and opens with light on for quick and easy use
Download Flashlight Buddy today and SEE the difference!
Key words: light, torch, lamp, bright, led, free, white, fast
No-frills, simple, fast, and bright light right on your wrist when you need it. No more digging in your pocket for your phone when it's too dark to see.
After installing on your mobile, launch from your Wear Device's "Start..." option, or with the voice command "Start Watch Light"