Allows you to use the menu key to unlock the phone from the lockscreen
Run the app, enable it, and then press menu to unlock the phone when you're on the lockscreen.
Tested on the Nexus One, the Droid, G1, MyTouch, Droid 2, and Dell Streak.
2.1 and 2.2 (froyo)
AOSP ROMS ONLY!
*** NEXUS S 4G (SPRINT) ONLY ***
Utilizing this widget you are able to toggle WiMax / 4G of with a single click. No more traversing the setting screens to turn the service on and off.
* Graphics complement stock Android / Gingerbread
* Widget can be resized and maintain a consistent look and feel
* Save time by not traversing setting screens
*** NEXUS S 4G (SPRINT) ONLY ***
SEO: android, aosp, 4g, wimax, nexus s 4g, herring, crespo, crespo4g, ns4g, widget, switch, toggle, cyanogenmod, cm, cm7, gingerbread, froyo, ice cream sandwich, ics, robert burns, burnsra
Smart IR Remote works with any Samsung and HTC devices with an IR Blaster, and any other brand phone/tablet with an IR Blaster that runs Android 4.4 or above provided originally by the manufacturer. Even better, Smart IR Remote also works on most custom ROMs like CyanogenMod, Paranoid Android, basic AOSP, AOKP, etc.
Smart IR Remote is an universal remote control app that can command almost anything that receives InfraRed commands, like a TV, Set Top Box (cable and sattelite box), DVD, BluRay player, VCR, Amplifier, Air Conditioner, AV Receiver, DSLR camera, etc. Better yet, you can combine your remotes into smart remotes (activities) so that on your custom remote you'll have the volume buttons to your surround system, the channel buttons to control your set top box and the display buttons to control your TV. It's the only Android universal tv remote that can do that, while controlling any other device too!
Do you want to help translate our app? Visit https://crowdin.net/project/smart-ir-remote
If Smart IR Remote doesn't work on your ROM or if your remote is missing, feel free to email us and we'll do our best to help!
On top of all that, since you're holding a phone, why not use some of it's unique features?
AIR GESTURES - exclusive to Android 4.1-4.4 Galaxy S4
Simply wave your hand above your phone to change channels, volume, or whatever your heart pleases - it's all configurable!
MUTE/PAUSE ON PHONE CALL
Smart IR Remote can now mute your TV, pause your media player, or even switch them off if you wish, all of that when your phone rings.
Group commands in batches, sort them and add delays, and then execute the series of commands one after the other. Imagine being able to turn your TV, Xbox and surround system on, switch TV to HDMI 1 all with a single tap!
Automatically execute commands or macros, when certain conditions occur: your phone rings, at a time chosen by you, when you use your phone's Volume Buttons. Are you a Tasker fan? We have a Tasker plugin that integrates well and lets you to send commands
With both lockscreen and homescreen widgets, you'll have your favorite just a tap away when you grab your phone. Need something even better? read on
FLOATING REMOTE (CHATHEAD)
The floating remote is a remote that stays above other apps which can be shown with just a single tap and lets you send commands even while you're playing a game on your phone
BACKUP / RESTORE
If you switch ROMs often or need the remotes you put hard work on to be available on all your devices, you can simply make a backup once and then restore on all your other devices
RECORD REMOTES - exclusive to the HTC One due to hardware limitations in other devices
Couldn't find your remote in our list? Simply record each button to have it just the way you want it. Are you in a good mood? Opt in to share your remote with us so that other customers can make use of your work too!
Almost all brands in the world are supported, including Samsung, Sony, Toshiba, Panasonic, Yamaha, DirecTV (Direct TV), etc.
- Network communication - for downloading remotes from our servers
- Phone calls (read phone status and identity) - for ID your phone for backups + task execution when your phone rings
- Draw over other apps - floating remote (chathead)
- List Accounts - login with Google for backups
- Prevent phone from sleeping - for keeping phone on while using the app
- Wifi (multicast) State - finding devices in your network
For the function of this app is [ROOT] permissions requiered.
Nexus that have installed Chrome are officially supported devices.
Of course you can test it with all Android devices you want, but it is not recommended.
You can find the source code on GitHub: https://github.com/ashotmkrtchyan1995/AOSPBrowserInstaller
**** ROM IS FOR THE NEXUS S 4G ONLY ****
Get notification updates, change logs, and links to support links for AOSP's oICS NS4G ROM Application.
**** When you first open the App hit Menu -> Refresh to ensure the latest content! ****
Get notifications when the latest version of oICS is released!
To Enable/Disable Notifications Use the Menu!
I am NOT the Developer of the ROM, I simply developed this Application. AOSP is the Dev for the oICS ROM.
***Note, the Android Notification Push APK uses Location/GPS Permissions, but I have disabled all the Location calls in the Application I found. I am not "tracking" you and this is not TechJeeperIQ. I am working on getting rid of the Location permissions but it might take some time.***
This Chinese Pinyin IME Plus is based "open source Google pinyin IME"
and modified by FREE WING .
Chinese Pinyin IME is an input method optimized for Chinese character input.
The IME offers a variety of methods for fast and easy input of Chinese characters,
- Latin keyboard
And Plus version Add
- Cursor key
- Key text and shadow color
- Keyboard Skin File select function
- Keyboard height setting
- More convenient
Support Simplified Chinese characters and Traditional Chinese Characters(FanTiZi)
Long press '中文'
(tell me Strange transform. Use machine convert Simplified to Traditional)
Unlike many OpenWnn modifications this does NOT require permission for internet access.
Note: To be used on your Android device,
the IME must be enabled in "Settings" → "Language & keyboard settings".
中文拼音输入法 based 谷歌拼音输入法 (The Android Open Source Project version)
Support Android OS 1.5-4.2
Support ARM/ MIPS/Intel x86 CPU (Full support !)
純正の Google PinYin IMEが重いと感じる場合、
Chinese Pinyin IME Plus for Android
Copyright (c)2013 Y.Sakamoto, FREE WING
This is a modification to Android Open Source Project's Google pinyin IME (谷歌拼音输入法 AOSP) software,
the source code of which is available in the official Android repository.
谷歌拼音输入法 Copyright (C) 2009 The Android Open Source Project
open source Google pinyin IME for Android Version 1.0.0
THIS APPLICATION REQUIRES NO UNSAFE PERMISSIONS TO RUN.
Support these Android OS version
* Android 1.5 Cupcake
* Android 1.6 Donut
* Android 2.0/2.1 Eclair
* Android 2.2.x Froyo
* Android 2.3.x Gingerbread GB
* Android 3.x Honeycomb HC
* Android 4.0.x Ice Cream Sandwich ICS
* Android 4.1.x/4.2.x Jelly Bean JB
Chinese China 中国語 ピンイン ピン音 拼音字母
中文 漢語輸入法 中國 汉语输入法 简体字 繁体字 正体字 簡體字 繁體字
Chinese Dictionary 中国語辞書
Battery Percent is Android 4.4 KitKat hidden feature.
You can't see the battery percent, if the battery more than ~75%. Because white text color.
How to use
1. Open this app.
2. Touch on toggle button for set "Enable" or Disable"
3. Reboot system to take effect.
+ Widget to turn on/off your flashlight
+ Flashlight does not turn off when the screen is off
+ Use your screen light as a flashlight
+ Use notification to instantly turn off the flashlight
+ Led Brightness setting for most HTC devices
+ Widget styles include the look and feel of AOSP Jellybean and Gingerbread widgets
Flashlight mode uses your devices flash/led as a light source. With one button press your device becomes a flashlight. With this app you will always have a flashlight with you.
Screenlight mode uses your device screen as a flashlight. This mode sets the brightness of the devices screen to highest setting and draws white background. Screenlight is useful if your device does not have camera led/flash.
Widget gives you control to instantly turn on/off the flashlight from your home screen.
App was tested on these devices:
Samsung Galaxy S2(international)
Samsung Galaxy S3
Samsung Galaxy S4
Htc Wildfire S
Htc Evo 3D
We are working on updates to support more devices.
Please send us your feature requests and device requests to our support email.
So I made this IME for those Google TV and AOSP products especially with H/W keyboard.
This IME supports software keyboard also so can be used on phone or tablet, but it supports just simple functions only and I never plan to update or upgrade it unless it has any fatal error.
I made this IME based on "SoftKeyboard" sample in Android SDK, and shared my source here.
the Korean/English toggle key on H/W keyboard is "SHIFT+SPACE".
If you are using any Korean layout keyboard, the "Korean/English" key on the keyboard should work also.
Just like other input methods, you should enable it after install and set it as default input method to use in Settings.
Tested on NSZ-GS7 (Sony Google TV Settop), SGH-I317 (Galaxy Note 2), SGH-i717 (Galaxy Note)
Thanks to Wonseok Lee for testing.
** Xposed framework is required http://forum.xda-developers.com/showthread.php?t=1574401 **
** Nexus 4/5 are only devices supported as of now **
Intelli3G will intelligently manage your 3G connection and prevent your phone from losing battery when you are not using it. Intelli3G will put your phone on 2G network when it is your pocket. It will not disable your data like most other apps. You will still get all your notifications with minimal battery drain.
- Manual 2G/3G toggle.
- Option to use GSM Auto mode for 3G which is more battery friendly than the default WCDMA preferred mode.
- 3G only mode, for those times when you need bandwidth immediately.
- A lightweight service to disable switch to 2G when you are not using your device.
- Delay switch to 2G if a download is active.
- Option to disable service on call or WiFi tethering or when the device is charging.
- Switch to 3G on screen unlock.
- Switch to 2G when you are connected to a WiFi network.
I observed the below facts about the Nexus 4:
- On 3G idle, you lose around 3-4% battery per hour depending on your 3G network strength.
- On 2G idle, you will lose less than 1% per hour.
I realized that I was constantly disabling 3G to get through the day. Then, I wrote this app to replace all the manual toggling to conserve battery.
If you have had the following problems on your Nexus 4, do try this app
- You lose a significant amount of battery charge overnight.
- You see msm_hsic_host wakelock (related to 3G radio) eating away most of your battery.
- You get less than 3 hours screen on time on a full charge.
Intelli3G is still in development, your suggestions are welcome. Send out a mail to firstname.lastname@example.org
- If you are rooted, install Xposed framework from here http://dl.xposed.info/latest.apk and reboot your device.
- After installing the app, enable the Intelli3G Xposed module and reboot
- If in case the app stops working, after an update, stop the service in app UI, clear app settings, and reboot.
XDA support thread:
and activate this hidden functionality.
WARNING: Often these menus are hidden for a reason - they MIGHT damage your phone so be warned.
GRAVITY BOX Needs AOSP or Stock Factory Image Nexus Android 4.4.X KitKat Roms (Nexus4/5 etc..)
GRAVITY BOX Needs '' Rooted Device '' and '' Xposed Framework --> http://dl.xposed.info/latest.apk ''
Developer: C3C076 @XDA
GravityBox - A complex Xposed module targeted for devices running Android 4.4.X, which turns vanilla ROM into
feature-packed "non-flashing" custom ROM.
Originally, this module was designed for MTK6589 devices which lack custom ROMs built from source due to MediaTek closed-source policy.
Later on, it was adjusted to support other (non-MTK) devices running vanilla or close-to-vanilla AOSP ROMs.
The app utilizes amazing Xposed framework coded by recognized
developer rovo89 which, briefly, provides interface for injecting code into any app, including system services allowing modifications of applications and system services at run-time. One of the biggest advantages of GravityBox is that it is not bound to any specific device. Actually, it should run on any device having vanilla Android 4.4.X (ROM close enough to AOSP).
This project wouldn't be possible without rovo's Xposed framework, so huge kudos to him.
--- CyanogenMod Pie controls
--- Expanded Desktop
--- Statusbar QuickSettings tile management with tile reordering
--- Lockscreen targets
--- Statusbar icon coloring
--- Statusbar Brightness Control
--- Additional QuickSettings tiles:
------- Sync on/off, WiFi AP on/off, GravityBox shortcut, Torch, Network mode (2G/3G/2G+3G switch), Sleep, QuickRecord,
QuickApp, GPS on/off, Ringer mode, Volume tile, Camera tile, ...
--- Quick pulldown - switches to QuickSettings when status bar is pulled down near edges
--- Auto-switch to QuickSettings when there are no notifications
--- Center clock in statusbar
--- Battery indicator style
--- Navigation bar tweaks including cursor control keys
--- Navigation bar ring targets
--- Low battery warning policy
--- Disable LED flashing when battery low
--- Disable LED while charging
--- Advanced power-off menu (reboot, recovery)
--- Volume key cursor control
--- Skip tracks by volume key long-press while screen off (thanks to rovo89)
--- More volume levels for music stream
--- Option to control safe headset media volume
--- Button for clearing all recent tasks at once
--- CRT screen off animation
--- Minimal brightness setting
--- Autobrihtness levels adjustment
--- Lockscreen tweaks - show widgets maximized, lockscreen background style (color fill, custom image)
--- Lockscreen rotation
--- Hardware key actions - menu long-press/double-tap, back long-press, home long-press
--- Dithered Holo background
--- Option to use solid black Holo background
--- Expandable volume panel
--- Option to unlink ringtone and notifications volumes
--- Notification drawer style (background color, image for portait/landscape, transparency)
--- Button backlight modes (default, disabled, always on while screen is on)
--- Dialer (Phone) tweaks
--- Launcher tweaks
--- Screen recording
--- GravityBox Actions - interface for 3rd party apps
... more to come
1) Backup your current ROM in custom recovery. I am serious. Don't skip this step.
2) Get the Xposed installer from Download section from Xposed official thread (the latest version is typically available at this link: http://dl.xposed.info/latest.apk)
3) Install and run Xposed installer and follow the instructions to activate Xposed framework
4) Reboot. If device doesn't boot that means that the Xposed framework is not compatible with ROM you are currently
running. You don't need to continue with the next steps. You will have to restore your ROM from backup.
7) Run Xposed installer, go to Modules menu and activate GravityBox by checking the checkbox
9) Launch GravityBox from app drawer or from Xposed installer and set options as desired
** PLEASE EMAIL TO YOU IF YOU HAVE ANY QUESTIONS, OTHERWISE, I CAN'T ANSWER FROM PLAYSTORE **
** I am busy to debug the AOSP version which have English/Symbols/Cangjie together. Please stay tune. **
If you wants the English Keyboard, you can go to get the beta version.
1. You can configure the Android 4.2 English keyboard and it will show a "Earth" icon to change input method:
"Language & Input" -> "Android keyboard Settings" -> "Advanced settings" -> "Switch to other input methods"
2. Key Vibration and Key Sound is turned off by default. Please go to Settings to turn it on.
This project source code has been hosted at Github and it is very first alpha project. You can get the code from the following links:
If you find anythings problem on using latest version, you can download the previous version of apk from https://github.com/hilarycheng/another_android_cangjie/tree/master/release
****People interested in translating the application please email me****
If you don't like the TouchWiz launcher, but don't want to change to another launcher like Nova because you lose the S Pen/Headset detection and QuickBar feature that Samsung provides, then this application will help by filling that gap.
-Can be used by Tasker to detect the S Pen detachment/insertion.
-Launches the Application/Shortcut chosen by you when the S Pen is detached/Headset is plugged in. (can be disabled)
-Launches the Application/Shortcut chosen by you when the S Pen is attached/Headset is removed. (can be disabled)
-Shows a Notification with custom text when the S Pen is detached/Headset is plugged in. (can be disabled)
-During a call the auto launch for the S Pen is disabled so that it does not conflict with S-Memo auto-launch. (can be disabled)
-Quick Bar of up to 3 Applications or Shortcuts in the Notification Bar.
-Can select custom insert/detach sounds for the S Pen.
-Up to 3 applications in the Application Shade
-Auto-Launch blacklist of up to 1 application
-Automatically lock phone when S Pen is inserted. Smart mode is also available in which phone is locked only if it was locked when S Pen was detached.
-Notification icon's can be made transparent to make it look better on Note devices where the default notification cannot be disabled.
-Application selected for auto-launch will close when S Pen is inserted/Headset is removed
-Application Shade will be dismissed when S Pen is inserted/Headset is removed
-Application Shades can be nested
-Capacity of QuickBar will increase to 6
-Application limits from the Application Shade and Blacklist will be lifted
-Volume of the S Pen insert/detach sounds can be adjusted
-Smart Launch mode will be available which allows you to select a seperate Application/Shortcut/Action to launch if the phone is locked
-Ability to select an Icon Pack to be applied to all the icons of the Application Shade/Quick Bar
Tags: spen helper, spen, galaxy note 2, spen attach, spen detach, spen application, spen tool,note 10.1,tasker plugin,quickbar,s pen,s-pen, note buddy
Call Vibrator is a tool for alerting you when phone call is answered, disconnected.
* Vibrate when outgoing call is answered.
* Vibrate when incoming call is connected.
* Vibrate when phone call is disconnected.
* Vibrate when phone call elapsed certain time.
* PROCESS_OUTGOING_CALLS: To detect outgoing call is initiated.
* READ_PHONE_STATE: To detected phone state (idle, ringing, offhook).
* READ_LOGS: To analysis when outgoing call is answered.
* VIBRATE: Use vibrator to alert user.
* WRITE_EXTERNAL_STORAGE: Write logs to sdcard.
* WAKE_LOCK: Keep device awake during phone call.
* ACCESS_SUPERUSER: For devices running Jelly Bean or above, **ROOT** is require to grant READ_LOGS permission to application.
* INTERNET: For Admob SDK.
* ACCESS_NETWORK_STATE: For Admob SDK.
* **ROOT** is required for devices running Jelly Bean or above.
* **IMPORTANT** For outgoing call vibration required radio log is not closed and conform to AOSP source code, there's no guarantee that it works on all devices. If this feature is not work on your devices, please report to email@example.com
* **NOTICE** PLS DO NOT REPORT BUG AS REVIEW, since I could not contact you for further details. Please report to firstname.lastname@example.org, thanks!
If you like my work, please consider purchasing the donate version! http://goo.gl/XOdmW2
No advertising!!! No permission!!!
All languages as in AOSP source code.
Languages: AF, AM, AR, BE, BG, CA, CS, DA, DE, EL, EN-rGB, ES, ES-rUS, ET, FA, FI, FR, HI, HR, HU, IN, IT, IW, JA, KO, LT, LV, MS, NB, NL, PL, PT, PT-rPT, RM, RO, RU, SK, SL, SR, SV, SW, TH, TL, TR, UK, VI, ZH-rCN, ZH-rTW, ZU
The app can not add new camera feature. Because this only uses the already existing functionality of the camera Gallery App.
Tags: camera, launcher, nexus, nexus7, tegra3, gallery
More from developer
Feel free to leave comments. NOTE: Since this is a work in progress, your input is the key to make this project great!