Changeable components include:
Other engine simulators exist but none are specifically designed for the Type 1 engine. This is why Dub-Dyno is the best tool available when planning an engine.
Give Toopher a try with LastPass and Mailchimp, or visit http://toopher.com for a full list of supported sites. We also support "old school" two-step authentication on Facebook, Google, Outlook, Dropbox, Evernote, or anything marked "Software Implementation" at http://twofactorauth.org.
Please do contact me if bugs on the plugin is found.
Ever wanted to log using Torque Pro as if it was running on a dyno ?
Showing results such as peak horsepower and torque on the rpm it was achieved ?
Well look no further, this plugin does the following.
- [NEW] Dynographer by Gear
- Allows the user to find out at which specific rpm was the horsepower / torque produced.
- *Street friendly as it only takes the highest values of horsepower / torque from your runs.
- Allows minimum rpm trigger for plugin activation as such preventing low horsepower readings which are totally off the power band of your vehicle.
- Transmission loss factor can be also adjusted in the settings
- In addition to the transmission loss factor you may fine tune the plugin along with Torque Pro with BHP Correction Error Factor allowing two factor modifications for an accurate reading.
- Custom entry of speed time attacks, such as 0-X (X Being the custom value you have set defaulted to 100) kmph / mph. (It's separate for both types in a sense allowing 2 readings if converted in-between the values.)
- Time attack maximum activation speed, allows the user to select a maximum speed barrier when launching the vehicle instead of the usual 0 kmph start.
- Monitors the commonly available (in Torque) essential functions of the engine through Torque Pro such as Coolant Temp, Engine RPM , Intake Air Temp and Timing Advance.
*Assuming that your driving safely / doing it on a track.
For best accuracy use External GPS (high refresh rate).
-Measure car performance for flat road runs (based on accelerometer, GPS and other)
-Acceleration (none) to .. in km/h (kph) mph , user defined speed ranges
-Travel time for 60ft, 330ft, 1/8 mile 1/4 quarter mile (mobile dragstrip)
-Very accurate for accelerometer : ~1-2% off car speed sensor
-No need to press buttons - just drive , measure and review the results when you want to
-Dyno with dynamic power graph and torque graph over RPM
-Store best results and compare it with others
- Instant Login: Barcode Scan, Proximity (BLE) and On Device Login, Android Wear approval
- One-time Passwords
- Single Sign-on and Secure Sign-on (with two-factor authentication)
- Authenticator Two-Step Verification (TOTP)
- Unlock your MAC or PC computer securely with two-factor authentication
- Securely unlock your MACs with Proximity and two-factor authentication
- Locker - Secure your notes and passwords in an encrypted manner
- Instant Registration
To unlock SAASPASS you can use:
- Pattern (both visible and invisible)
- Scrambled Keypad
- 4 or 6 digits as your PIN length
SAASPASS uses Proximity to login users with Bluetooth Low Energy (BLE) capable devices.
BLE support is on Android 5.0 devices with firmware support like Nexus 6 (it doesn't work on Nexus 5 for example)
You don't have to type in the dynamically generated one-time password (passcode). You never need a key fob, dongle, token or a random number generator ever again!
You can clone your SAASPASS onto another device as well like a tablet and we will add wearables support shortly as well.
Companies can set up many business and productivity applications including email and collaboration suites. Out of the box support for cloud applications include, but are not limited to, the following services:
......... and much more
Custom apps can be integrated with RESTful APIs
On premise applications are also supported including Active Directory.
You can also add the Google Authenticator TOTP two-step verification format for personal services like:
Amazon Web Services
DNS Made Easy
Google Cloud Platform
Guild Wars 2
SAASPASS can be used for secure access and to prevent and mitigate against a number of hacking methods and attack vectors that include Phishing and Man-in-the-Middle attacks. SAASPASS multi-factor authentication is the easiest to use security product out there and removes all the hassle out of secure logging in and remembering usernames and passwords. In addition, it helps make static credentials obsolete.
Note: Bluetooth 4.0 connections and signal strength, like any wireless channel, can vary and be effected by environmental conditions and battery strength and a number of other variables.
The only Heroku app created out of passion for the platform, and the community surrounding it.
We are pleased to present the most elegant mobile app built for the Heroku platform, with every
feature you could want while on the go. Available for both phones and tablets-alike.
* Heroku status
* OAuth-based authorisation with 2FA support
* Multiple accounts
* Support for organisations
* A console with amazing performance
* Beautiful streaming logs with plenty of sorting & filtering options
* Restart one dyno, all of them, or scale
* Quickly check out, or set new config variables
* Take a look at releases, so you know what you broke
* Find your favourite add-on, and change its size
* Check the overall cost of your app
* Add new collaborators
* Put your app in maintenance
We're always available to help you, via several channels:
Email: email@example.com / firstname.lastname@example.org
Twitter: @lovelyheroku and @lovelyhq
We look forward to your feedback and all the nice things our app will help you do.
If you like LovelyHeroku, please rate it on Play Store and tweet about it. Thank you!
Disclaimer: Heroku is a registered trademark of Salesforce.com, Inc. LovelyHeroku is not affiliated or endorsed by Salesforce.com, Inc.
PagerDuty for Android allows you to:
✓ Receive unlimited push notification alerts
✓ Easily access and respond to open incidents (acknowledge, resolve or reassign)
✓ Quickly see if you're on-call
✓ Access a contact list of all users in your account (includes phone & SMS numbers and email addresses for each user)
A PagerDuty user account is required to use this application. Signup at http://www.pagerduty.com/
Manage your lists
Monitor the growth of your list, find subscribers near your current location, filter by group, find out who's most engaged, and more—all from MailChimp's mobile app.
Subscribers don't always request to be added to your list when they're sitting in front of their computers—sometimes they ask you in real life! Add those email addresses to a MailChimp list directly from your phone. You can also edit subscriber profiles and add notes on the spot.
View all your campaigns in one place, and schedule or send a campaign when it's ready. Start a campaign back at the office, and quickly send it from your phone when it's ready to go out. We'll show you the same checklist you see in the web app, so you can make sure your campaigns are perfect before sending.
You don't have to be at your desk to check in on your campaigns and see how they're performing. MailChimp Mobile gives you instant access to all your campaign stats, including revenue reports. Find out where in the world your emails are being opened, who's tweeting about your newsletter, and how much money your campaigns are generating.
Your whole team can use MailChimp for Android without getting any wires crossed. If you've set up multi-user accounts, you can add any account with any permission level to MailChimp's mobile app.
Snap a photo of something your customers will love.
You can also use a photo from your camera roll or grab one from your Instagram feed.
Tell them all about it.
Write a quick note to go along with the photo. Include a link to the product or to your
website, and pick an email template.
Send it to the right people.
Send to your whole MailChimp list, a segment of your list, or pick specific customers
who will be excited to hear from you.
MailChimp Snap requires a MailChimp account.
Collect Addresses Offline
- Even when you're not online, Chimpadeedoo collects email addresses and stores them locally on your Android device. Next time you connect, Chimpadeedoo automatically pushes the addresses to your MailChimp list.
Customize Your Form
- Choose from 10 different themes or use your own. Pick your font and button style, write your own copy, and connect the form to any MailChimp list.
Protect Your Data
- Chimpadeedoo's app settings are password protected.
* Important Notes *
- Chimpadeedoo requires a MailChimp account. Sign up for a free account at MailChimp.com
Use MailChimp's drag and drop and rich text editors to work on draft campaigns from wherever you are.
Easily add photos from your Android device or MailChimp gallery and edit them with Aviary. You can also create new HTML campaigns, right from the app.
Edit campaigns offline, and get real-time updates when someone is working on a campaign. Post feedback and review comments from inside the app.
If someone edits online while you're working offline, we'll show you any conflicts so you can easily resolve them.
Send from your Android device
Send your campaign when it's ready, even if you're on the move. Review your sending checklist and preview both desktop and mobile versions, just like you would from the web app.
Things happen fast at conferences and events. If you're a host, you might have important updates to get to your attendees and speakers, but no time to wait on a wifi connection or coffee break. Gather lets you text your guests as a group, and they can reply individually to you. Manage all your messages in one place so nothing gets lost. And as always, we'll keep your data safe. Phone numbers are removed from Gather when the event is over.
* Pick a Gather phone number, so you can keep your personal number private.
* Create a public form for your event. Then you can link it with a MailChimp list to invite your subscribers.
* Send guests a link to your Gather event form, where they can sign up to receive text alerts.
* Text the whole group at once. Guests can text you back, with no app or setup required.
* Features *
- View Stats by Day, Week, or Month
- Sending Stats
- Open and Click Stats
- Search/Browse Sent Messages
- Sort Activity by Status (Sent, Bounced, Rejected)
- Lock the App with a Passcode
* More About Mandrill *
Mandrill runs on the delivery infrastructure that powers MailChimp, the world’s best email service provider.
Every mailing list has some VIPs. Golden Monkeys helps you keep track of them on your smartphone.
* Real-time Alerts *
Don't bother with digging through your reports to find out if special people on your list have seen your email. Golden Monkeys sends you push notifications when they open and click.
* Activity Sharing *
If your special subscribers' activity is critical to your business, you can easily email it to co-workers.
* Subscriber Profiles *
See the activity and member ratings of your most important subscribers.
** Features **
- Receive push notifications about subscriber activity.
- See where your subscribers are located.
- Browse member ratings and recent activity.
- Email subscriber activity to your coworkers.
- Enable password protection in case your phone is lost or stolen.