This app requires ROOT permissions.
If you don't know what root permissions are, you probably don't need this app.
No-frills CPU Control is a tool you can use on your rooted  device to quickly set the CPU frequencies and governor to use.
It allows you to use the highest frequency your phone supports and gain some precious FPS in your preferred game, or go down to the lowest frequency and gain some more juice when your phone is sitting idle.
All of this without any memory footprint or services running in the background!
It has been reported working on a large number of rooted  devices from HTC, Samsung, Motorola, LG, Huawei, ZTE, Oppo and so on! Even Kindle and Nook Color!
Unfortunately, it does NOT work on Flytouch tablets, Zenithink zt180, HaiPad M7/Tabtech M7 or fake HTC/Samsung clones. Sorry about that, but you knew what you were buying when you did... didn't you?
Is your device supported? You need ROOT permissions and you'll probably need to be running a CUSTOM ROM (an example is the famous CyanogenMod) with kernel frequency scaling enabled. If you are unsure... just install the app and see for yourself!
If you need a custom ROM for your phone, the best places to find one are XDA [http://forum.xda-developers.com], MoDaCo [http://android.modaco.com/] or similar forums.
Be wary of the frequencies you select! Your phone may lock or become unresponsive if it doesn't like extreme values, but -hey- better safe than sorry: even though No-frills CPU Control allows you to choose if you want to apply the settings on boot, it comes with an extra "safety valve" too! If the device doesn't shut down (or reboot) in a clean way, it will not apply the settings, avoiding those nasty boot-loops you may have had with other overclocking apps. Please keep in mind that apps like QuickBoot are as quick as they are unsafe…
- Easy GUI to set frequencies, governor and i/o scheduler
- "safety valve" to avoid boot-loops in case of unsafe settings (more info in the homepage)
- Stats screen to see the effective usage of frequencies
No-frills CPU Control is open source under Apache 2.0 license. You can find the source code, more informations and you can ask for questions on its project post directly on XDA: http://forum.xda-developers.com/showthread.php?t=911917
SUPPORT: If you have any problems, before you write a negative comment, write an email or go to the homepage to get answers.
If I don't reply you or solve your problem, then go ahead and post a negative comment.
HINT: If you can't find the email of the developer, use the "Send CPU data" feature from the main screen, instead, and add your questions.
This app is FREE and will always be FREE.
Translations are ALWAYS welcome and are now as easy as getting a (free) account to http://www.getlocalization.com/noFrillsCPU/ and correcting what's wrong or filling what's missing. A HUGE "THANK YOU!" to all the people who helped translating this app! (jdb78, kallt_kaffe, David Kejzlar, Ryunosuke Tanaka, Charlie Cheung, dxdiag32, Corentin Garcia, Carlos Camacho, dancer_69, TorbenKB, Chris, FollowWings, Spaar, prescott66, Marco Bizarro, Cristian Silaghi, Cenk H. Uzunboy)
Starting with version 1.21 the app has a new look & feel matching the new Android 4.0 Ice Cream Sandwich and has dropped support for older Android releases (1.6 and 2.0). Don't worry! There's a new app, No-frills CPU Control CLASSIC which will always have the same features as the classic app with the old look & feel!
: if you don't know what a ROOTED device is, you can find a pretty good explanation here: [http://www.androidauthority.com/rooting-for-dummies-a-beginners-guide-to-root-your-android-phone-or-tablet-10915/]
Its prime purpose is to be a battery saver and to save as much battery as possible, but it can be used to overclock at the same time (if the kernel of your device supports it).
Depending on triggers (based on the battery) different profiles are loaded. Each trigger has different profiles depending of the the state of your phone (if it is locked, on battery, on power or a phone call is being done).
A profile can modify the following:
* The CPU governor, its thresholds and min/max frequencies off your CPU (i.e. setCPU speed).
* The state of services like:
- mobiledata connection
- 3G/2G switch
- background sync
- airplane mode
Configurations (i.e. a set of trigger and profiles) can be loaded based on the time of the day and the day of the week. This allows you to set a different behaviour during the night or the weekend.
In praise of CyanogenMod... ;)
If you use and like this app please subscribe to the mailing list email@example.com and participate in the forums on https://sourceforge.net/projects/cputuner/ (Project webpage).
You can follow CPU tuner on: https://plus.google.com/109797451979104819882
If you want to help translating please join in at http://www.getlocalization.com/cputuner/.
Please report errors in a mail to the address listed below not in a market comment.
You best generate a capabilities report first, by going to settings then to backend and choose capabilities report, when it is done hit send (and save the mail as draft). Then describe your issue (and if possible attach a logcat output along with the zip file from the report).
A note on permissions: Yes there are a lot and potentially dangerous permissions needed, but cpu tuner does not request the network communication permission which means that cpu tuner cannot send any information back. Further more cpu tuner is opensource so you can browse the code and check....
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
• Voted #1 TOP ROOT APP on Twitter.
• New DEMO VIDEO: http://youtube.com/watch?v=YU33zabluSY&hd=1
• No icon! Requires the Titanium Backup (free) app (see "More" section below). This key will turn it into PRO.
• The same key can be used on several devices!
• For download issues & support: read below.
PRO Features Added:
[✔] Multiple backups per app
[✔] 0-click batch restore
[✔] Backup/restore SMS,MMS,calls,bookmarks,Wi-Fi AP as XML
[✔] Multi-user support for some apps! (eg: games)
[✔] Batch verification
[✔] Backup apps without closing them!
[✔] Create your own update.zip containing apps+data!
[✔] Restore individual apps+data from non-root ADB backups!
[✔] Restore individual apps+data from CWM backups!
[✔] Restore individual apps+data from TWRP backups!
[✔] Hypershell speed
[✔] Migrate system data across different ROMs
[✔] Market Doctor (relink apps to Market)
[✔] "Destroy all Market links" feature
[✔] Apps freezer (incl. batch support)
[✔] Market "auto updating" manager
[✔] Convert user apps <=> system apps
[✔] Unlimited schedules
[✔] Sync to/from Dropbox (manual/scheduled)
[✔] Sync to/from Box (manual/scheduled)
[✔] Sync to/from Google Drive (manual/scheduled)
[✔] TB Web Server: download/upload your backups as a single ZIP on your computer
[✔] Load/Save a Filter and use it in Widgets/Schedules
[✔] Change the device's Android ID, restore it from a backup or after a factory reset
[✔] Protect backup against deletion
[✔] Send backup (to e-mail/cloud) and import it in 1 click
[✔] Backup→Verify→Un-install an app in one shot
[✔] Freeze/defrost/launch apps in a single click
[✔] CSV export any app DB (e-mail or Google Docs)
[✔] Brand the app with your name
[✔] Bloatware Melter (experimental)
[✔] Convert app data to/from faster WAL DB format
[✔] And more!
[✔] Dalvik cache cleaner
[✔] Integrate system app updates into ROM
[✔] Move apps into ROM
[✔] Integrate Dalvik cache system elements into ROM
What the Press says:
"The Most Essential App For Android" - Tech'n'Life
"NONE can compare with this one" - Android Market Review
"The Best Backup App for Android" - Lifehacker
"The hands down best Backup on the market" - Absolutely Android
"It is a must-have backup app" - Droid Ninja
Support & Upgrades:
• All upgrades are FREE.
• If Market won't download your PRO key: although credit card authorization *usually* occurs instantly, in rare cases it may need up to a few hours to complete. Try the Web version of Play Store. If problem persists, login at checkout.google.com to cancel your order & try again.
• If your PRO key doesn't work (eg: installed before the purchase completed) please un-install it and then reinstall it from the Web version of Play Store.
• We aren't responsible for any currency conversion fees charged by credit card issuers.
• For support please see the Knowledge Base at http://titaniumtrack.com/kb and then e-mail us at the address below.
Here's the older TB Pro demo video:
Thank you for supporting our work!
AnTuTu CPU Master is a tool for changing the CPU/GPU speed on a rooted Android Mobile Phone/Pad.
CPU Master Automatic detection CPU's available frequencys, don't need to manually choose.
CPU Master's OverclockWidget show the CPU and battery stats, and change the CPU speed faster and simple.
CPU Master feature:
+ Speed up your processor
+ Powersave battery (speed down)
There are many apps that save battery or increase performance, however Root Booster uses the most proven settings to achive the best results. You can easily apply these settings with preset modes which ensure speed boost, battery boost or stability boost. These modes are achieved by applying appropriate settings to the main phone components. Here are some explanations for what particullary Root Booster does to your CPU, RAM and Android OS system.
Hibernation (Android OS optimizer)
Each Android application can have one or multiple services. They run in the background and usually perform some kind of task. Many people think that when they kill an application, it completely stops draining your battery and computing power, but that's not true. Application still have servicies that are running after killing and still drains battery and comuting power. On the other hand, if you hibernate an application it stop it\'s servicies and application does not drain battery and CPU computing power anymore. Hibernation is gently and efficient way to save your battery and increase performance.
Root Booster will find battery draining and performance demanding applications and auto hibernates them.
CPU (processor governor control)
A governor is a driver for the regulation of CPU frequency. Governor decides how fast and when will be achieved maximal or minimal CPU frequency. Setting apropriate governor makes your device more battery saving, fast or even more stable. However, deciding which governor is suitable is a little bit tricky.
Root Booster can decide which governor you should use and automatically applies the most suitable governor for the selected mode.
RAM (memory manager)
Each application uses VM heap for it 's data and work. The main reason to change the VM heap size is stability improvement. Many big applications need a big amount of memory (VM heap) for their work. If the VM heap size is smaller than the requested memory, it causes an application crash (Out of memory error). Setting heap size is hard task and there is no manual to set up for better performance. Better performance can be only achieved by testing.
Root boster will test your RAM and sets up your VM heap size for better stability and performance.
Note: Root Booster is designed to work only with rooted devices
- SoC (System On Chip) name, architecture, clock speed for each core ;
- System information : device brand & model, screen resolution, RAM, storage.;
- Battery information : level, status, temperature, capacity ;
- Android 2.2 and above (version 1.03 and +)
- INTERNET permission is required for the online validation (see notes below for more détails about the validation process)
Online Validation (version 1.04 and +)
The validation allows to store the hardware specification of your Android device in a database. After the validation, the program opens your validation URL into your current internet browser. If you enter your e-mail address (optional), an e-mail with your validation link will be sent to you as a reminder.
Settings screen and debug (version 1.03 and +)
If CPU-Z closes abnormally (in case of bug), the settings screen will appear at the next run. You can use that screen to remove the main detection features of the application, and make it run.
In case of bug, please open the application menu and choose "Send Debug Infos" to send a report by email
FAQ and troubleshooting
You can visit the FAQ at that address : http://www.cpuid.com/softwares/cpu-z-android.html#faq
This app require root! Make sure you device is rooted first! Some devices require busybox also.
Special thanks to drifty for the nifty logo!
All original credit for discovering the importance of efs and backups goes to autoprime!
Optimus G Pro and LG G2 support is due to drjbliss and loki
Freegee is all new and rewritten from scratch. Everything is done on device now so there is no more white listing every variant, only just enabling models.
If you run into an error please report it, send me a logcat. I can be reached via email or on xda/irc.
Dropbox support is under menu -> settings.
This is the donation version. It is exactly the same as the free version.
This is the next step in Project FreeGee. Have an LG Optimus G, LG Optimus G Pro or LG G2? If so this app will allow you to unlock (Optimus G only) or bypass your bootloader, remove LG Security and install cwm or twrp recovery. With removed lg security you can now uninstall any preloaded applications you want.
Please contact Shelnutt2 on freenode irc #lg-optimus-g with any problem.
The old 1.2.4 version, which is now depreciated can be downloaded here:
The source is available here:
No Root Screenshot It is an application that lets you take screenshots of your phone. This application works on ALL phones. Root is NOT required.
Take screenshots of any screen on your phone!
This application is for those users who need to take screenshots, but don't have root access to their phones.
PLEASE READ CAREFULLY BEFORE INSTALLING:
This application will instruct you to download and install a free desktop application on your Windows or Mac. Once installed, you must run the desktop application with your phone attached to your computer. This will enable screenshots on your phone.
Once you've done this, you can disconnect your phone and take screenshots whenever you want. However, every time you restart your phone, you'll have to connect it to your computer and run the desktop application again. If you restart your phone frequently, this app may not be for you, as it may prove to be too inconvenient.
Your phone will NOT be rooted or temp-rooted in any way. No system files on your phone will be altered.
If your phone is already rooted, please download the normal "Screenshot It" application from the Android market.
- Take a screenshot of your phone's screen
- Save as a jpg or png file and share anywhere
- Crop screenshots
- Annotate and draw on screenshots
- Screen shot status bar button
- Screenshot widget button
- Shake to screen shot
- Delayed screenshot timer
- "Share" menu integration
- Custom save directory
- Overlay phone information on screenshots
- Works on ALL devices
Please exclude this app from any task killer or anti-virus software on your phone. If you don't, you'll have to run the enabler more often.
Tags: Screenshot, screen shot, screen capture, no root
Check out ROM Toolbox which has included this app and added many more features.
For fast and friendly support please email us at firstname.lastname@example.org. We will be glad to help answer your questions and troubleshoot with you.
☆Two file manager panels
☆ Batch copy/paste, zip, tar, delete, move any file or folder
☆ Explore apk, rar, zip & jar files
☆ Change file permissions and ownership
☆ View and edit any file
☆ sqlite explorer
☆ Move, copy, rename, and delete files.
☆ Create and delete directories (folders).
☆ Send files by email.
☆ Add new files & folders in any directory
☆ Install zips using clockwork recovery
☆ Execute script files
☆ Show list of files with thumbnails for images.
☆ Bookmark any folder
☆ Open files and folders with other apps
☆ Change the theme (double tap home button)
☆ Sort by name, size & date
☆ Extract single files from zip/apks/jars
☆ Search for files or folders
ROOT IS REQUIRED
Root Cleaner is simple and effective application which a lot increases your peformance by cleaning your root system. You can choose between quick cleaning and full cleaning. Quick cleaning cleans your memory, file cache, drop caches, leftovers, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your whole root system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Root Cleaner also contains feature for uninstalling, clearing data and freezing or unfreezing your system and non-system applications. Root Cleaner makes your device as fast as possible just by clicking one button. If you are not satisfied with Root Cleaner you have full money back guarantee.
->Restart system UI
->Clean drop caches
->Clean empty folders
->Clean dormant folders
->Clean useless folders
->Clean useless files
->Clean dalvik cache
->Clean init.d folder
->Clean empty folders
->Clean dormant folders
->Clean useless folders
->Clean useless files
->Clear app data
★Quick cleaning interval
★Exception list for files and folders
-English, Czech, Slovak, Russian, Italian, Arabic, Portuguese
IF YOU HAVE SOME PROBLEM WITH THIS APP, CONTACT ME BY EMAIL PLEASE
This free app is AD FREE.
Three modes: Screen On/Screen Off/Charge Mode
Support both phone and tablet, dual core devices support.
AWARE: NEED A ROOTED PHONE OR PAD! Support up to Honeycomb!
AWARE: Sorry, most current MTK base devices were not supported!
Android 5.0 (Lollipop) support added in version 8.0.0
"For those who tend to get tired of Android's status bar, or just want more intuitive gesture-based controls on their tablet, this app is definitely worth a shot." - Android Police
★ Try Lite version before you buy
★ Requires root access
★ Multitask - start any application, shortcut or custom action without leaving current application
★ Custom actions - LaunchPad, Start application, Previous Application, Next application, Home, Kill current application, Back, Forward, Recent application list, Recent application dialog, Menu, Notification Panel, Hide/Show status bar, Start launcher shortcut(bookmark, contacts, settings, etc), Start Tasker task, Pause gestures, Exit, Screen Off (lock), Alt+Tab, Music Play/Next/Previous, Volume, Search, Voice Search, Select Input Method.
★ Swipe 4 fingers right - open previous application
★ Swipe 4 fingers left - open next application
★ Expand 4 fingers - LaunchPad (dialog with your applications, shortcuts and custom actions)
★ Pinch 4 fingers - Home gesture
★ Swipe 3 fingers down - Back gesture
★ Swipe 3 fingers up - Bottom recent applications bar
★ Swipe 4 fingers up - Hide/Show status bar (experimental)
★ Custom gestures - create your own gestures to start any application, shortcut or custom action
THERE IS NO WAY TO ANSWER MARKET COMMENTS OR CONTACT COMMENTATOR - EMAIL ME IF YOU WANT ANSWER.
Please don't post your problems in market, email me or go post to XDA, thanks:
If your device is listed as unsupported, please read FAQ in Help tab. If it still do not work, contact me by email: goodMoodDroid@gmail.com
Description: This application allows you to control tablet with gestures.
Swipe 4 fingers up to hide status bar. Do same gesture again to restore bar.
Swipe 4 fingers right to open previous application.
Swipe 4 fingers left to open next application.
Pinch with 4 fingers anywhere on screen to return to home screen from any application.
Swipe 3 fingers down to execute back action in any application.
Swipe 3 fingers up to show custom bottom bar with recent applications.
Expand 4 fingers anywhere on screen to open LaunchPad dialog. It allows you start your most often used applications, shortcuts or custom actions anywhere anytime with simple gesture.
Works in all applications, games and browsers.
Application will use freed space when you hide status bar. Some games even work better with status bar hidden.
There is an option to switch to single touch gestures if its more convenient. You can even create your own gestures for any action.
Full version adds following features: option to hide notification icon, custom gestures and special actions, any number of actions in LaunchPad.
Device Control does NOT root your device! It requires a rooted device.
To root your device, do a google search.
This application comes without warranty, only use it if you are 100% sure what you are doing!
I am NOT responsible for any damage to your device that may occur.
Improper use can make the system unstable, so please inform yourself if you are unsure about a certain feature!
This app is open source
Device Control is an app to control several features of your device as well as some nice extra features like a Tasker, App Manager, Editors, Entropy Generator, Wireless Filemanager and more.
With Device Control you can tweak and edit:
[+] Device specific features like Knock-On, vibration strength, screen color temperature, LCD power reduce, ...
[+] CPU frequencies, governors, i/o schedulers, ...
[+] GPU frequencies, governors, ...
[+] Kernel specific extras like intelli-plug and intelli-thermal by faux, msm dcvs toggle, mpdecision toggle, power scheduling, power efficient workqueues ...
[+] Voltage Control, Fast Charge and more
Note: Features need to be supported by your device. Unsupported features are getting automatically hidden!
It also can monitor:
[+] Your cpu and battery temperature
[+] Time in state of your cpu
[+] Maximum, minimum and current frequency as well as the governor of your cpu (fully multicore aware and toggle able auto refreshing intervals)
Extra tools like:
[+] Tasker (automatic fstrimming, screen off and on actions ...)
[*] Example: You can configure it to automatically toggle your cpu's frequency to a very low value once your screen turns off, to save battery, and restore the value when you are using your phone again.
[+] Editors (vm, sysctl, build.prop, ...)
[+] Quick tweaks (vm, build.prop, ...)
[+] Wireless Filemanager, allows you to access your device's sdcard / internal storage via any webbrowser
[+] App Manager to view information about the app, kill it, view them on Google Play Store, disable / reenable your apps to prevent them from running and hiding them from launcher
Device Control can automatically restore your settings on boot (sections to restore need to be checked in preferences)
Device Control is 100% ad free and will always be.
No need to spend money, you get every feature without paying or donating.
Device Control is in active development, if you like to contribute to the development or just buy me a beer, you can donate via in app purchases!
Donations are not required but highly appreciated!
Explanation of permissions:
ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: To read your ip address to display it at the Wireless Filemanager
ACCESS_SUPERUSER: Device Control requires root to function properly.
BILLING: For the optional in app donations.
INTERNET: Required for our built-in error reporting service to submit bug reports.
READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE: Needed for the Wireless Filemanager
READ_PHONE_STATE: For better detection of your device.
RECEIVE_BOOT_COMPLETED: To restore your tweaks on boot up of the device.
VIBRATE: To test the vibration strength.
CLEAR_APP_CACHE: To clear the app cache via the app manager
GET_PACKAGE_SIZE: To display size statistics at the app manager
GET_TASKS: To allow to detect running apps and kill them via the app manager
READ_PHONE_STATE: To get device informations
DELETE_CACHE_FILES, DELETE_PACKAGES, REBOOT, DEVICE_POWER: Used by NamelessRom to execute some actions without using superuser / root rights. These permissions are not granted on other roms as the app signature does not match.
We are looking for translators and would really appreciate if you could help us out!
(choose your language and go to "packages/apps/DeviceControl")
Application officially supports only HTC EVO 3D GSM/CDMA, however it might also work on other devices
If you install this application on unsupported device and something isn't working don't give bad mark. Send me mail and i will see what i can do
Submit issues here:
Info for HTC One XL, HTC One S, HTC Evo 4G LTE
There is a problem on some devices that is causing CPU1 settings not to stick. This is a Kernel/ROM issue, not the app
Kernel Tuner is tool for root users to completely customize their device behavior. This is the only application that offers full multi-core control over their devices. It allows users to control each core of their devices independently.
Custom kernel is required. Most of the features will only work on custom kernels. Check with your kernel developer to see if feature is supported
List of Features:
*Multi-Core CPU Handling – Control each CPU Core of your device independently
*GPU Overclocking – Only Qualcomm Snapdragon S3 and S4 devices with appropriate kernel are supported
*Voltage controll for the CPU
*View Times CPU was in
*Plugin for Tasker/Llama/Locale for changing profile
*Changing Capacitive Buttons Backlight
*Notification LED Timeout
[*]Storage(modify/delete SD card content) - used for writing application logs to SD card
[*]Your personal information(read sensitive log data) - read system logs for debugging purposes
[*]Network communications(full internet access, view network state) - Used for ads
[*]System tools(automatically start at boot) - Used to restore application configuration and settings after reboot
[*][*]System tools(install shortcuts) - Used for installing Home Screen shortcuts
If you have any problem or suggestion feel free to contact me, or write on official thread on XDA Developers
Google Plus: https://plus.google.com/u/0/b/115273553144904124119/
There is no need to give bad marks and report FCs in review. I am aware of every crash that happens and im doing my best to fix it as soon as i can. Thanks