-- Battery Test: Let the phone run for several hours, through the consumption of battery power to calculate your score.
Note: The battery test takes a long time, you may need to wait 5 hours to complete the test
-- Multi Touch Test: Shows your touch points and keeps the maximum count on screen.
-- System information: Including info for CPU, GPU, Memory, SD Card, Screen, WiFi, GPS.
-- LCD Test: Dead Pixel Test
You can use the application to:
-To complement the manufacturer's technical information.
-To compare the technical differences between more than 600 models of devices on the market.
-Test the proper functioning of all your sensors.
-Measure the accuracy of each sensor.
-To get the most out of your Smartphone.
-To check the GPS signal, camera, compass, accelerometer, microphone, speakers, WiFi signals, Bluetooth, GSM / UMTS, FM Radio, Display, Battery, CPU, Memory, Vibration, USB, Audio / Video , operating system, light sensor, proximity sensor, temperature sensor, flash sensor, NFC near field comunication, Barometer, the detection of Navstar satellites in the constellation jointly and individually, .. etc..
Please do not hesitate to send your comments to:
New infrared sensor added.
New virtual sensor step detector added.
New virtual sensor step counter added.
Camera detection bugs (force close) solved.
Log report bug corrected.
Updated camera api to level 15 (Android ICS 4.0.4).
Several bugs corrected.
Hygrometer sensor added (relative humidity.
4 new "Virtual" sensors added:
-Gravity (Gravity acceleration measure)
-Gyroscope (device angular speed measure)
-Angular Acceleration (Device Orientation relative to a tangent to earth plane coordinate system)
-Lineal acceleration (3 axis acceleration measure without gravity effect).
Added a 2D graphic representation of several sensors.
3D graphis added to several sensors.
Numerical calc. for highest sensors rate.
Several bugs corrected.
- Added support for NFC.
- Added support for Ant+ devices.
-Added in a test GPS accuracy to meet itself.
The block-GPS can check what Navstar satellite constellation are giving you coverage at all times and know the detailed specifications of each.
Corrected minor bugs.
- Added test pressure sensor of the touch screen.
- Detection of multimedia chip.
- Detection of version ALSA (Advanced Linux Sound Architecture).
- Detection of process model.
- Detection of the number of processors.
- Detection of the processor frequency.
- Added OpenGL version detection.
- Added detection of OpenGL graphics chip.
- The flash works on some models.
Phone Specs is the free application that reports about your device. Phone Specs can also report about your device's camera information.
Model, Manufacture, Resolution, Android version, etc.
Clock speed, cores, etc.
Total RAM, RAM Usage, Internal Storage, External Storage, etc.
Total number of cameras, back camera specs, front camera specs, etc.
Health, level, temperature, etc.
Network Mobile network type, Max speed, Download speed, upload speed, etc.
"MultiTouch Tester" shows your touch points with a nice UI and keep the maximum count on screen.
Some devices may have problems with multi-touch. (Touch points closing to each other or crossing the same axes will get reverse action, etc.)
Any problems or suggestions?
Please feel free to contact us.
-= Free features =-
◆ Dead pixel test: detect "dead pixels" by displaying a series of solid background color pages
◆ Color tests: contrast, gradient (banding) and saturation tests
◆ Gamma calibration tests (grey/red/green/blue)
◆ Viewing angle tests (This is useless for OLED displays)
◆ Multi-touch test
◆ Display performance tests
◆ Repair burn in - scrolling black & white bars
◆ Display measures info: screen size, GPU type, dpi, density-independent pixel size, OpenGL 1.x info, pixel format
◆ Real world pictures for reference and comparison
◆ 4-color gradient test with orientation change correction (Android 2.2 and higher)
-= Pro features =-
◆ No splash screen
◆ Full Google Cast support
◆ Repair burn in - noise (white, b&w, red, green, blue) => Only Android 2.2 and higher!
◆ Pixel format & dithering tests
◆ Built-in font styles test
◆ Manually DPI measurement
◆ Color charts
◆ Touch screen dead spot tester
◆ System Fonts tester
◆ DIP / PX calculator
-= Soft key hiding in ICS/Honeycomb/JellyBean =-
Use the preferences menu option for this or simply long touch the display during a test is running.
-= Gestures =-
◆ Slide left-right: change test image
◆ Slide up-down: change brightness
◆ Long touch: switch between full screen and normal screen (Android 3.0 and higher)
◆ Double tap: hide or show the test specific settings dialogue (if available)
When the soft keys are hidden it is not easy to advance to the next screen: First tap to make the buttons appear, then a quick swipe for the next screen before the buttons are hidden again.
Please consider purchasing the Pro version to support further development.
If you are having a problem or you have a suggestion about a missing feature, the ONLY way it will get done is if you email me! :)
You no longer need to buy expensive testing box devices that only work for specific models.
With various configuration settings, you'll be able to conduct an LCD screen test with SPEED, ACCURACY and SAFETY of your logic board and LCD screen.
**Version 1.0 Features**
* Various testing modes including Automatic, Swipe, Touch and Shake.
* Tired of seeing Miss High Resolution Chinese woman image on start of test?
- Change by selecting an alternate image file on your device.
* Power-Off LCD screen after individual LCD test to prevent electrical damage to logic board and LCD screen.
* Bulk testing mode for high volume testing needs.
* Configurable testing speeds.
* Pause test and resume with touch and volume buttons (in case LCD touch is broken)
* Full Screen Pixel Range Test
* Default Brightness, Screen Positioning and Sound on App load.
* Sensitivity settings for Swipe and Shake.
* Color choice selection
* Audible sound tones for testing complete and screen power on/off.
- Application does not store or require access to any "personal" information and is currently free of ads and free to download.
** Best used with Flex Extender to prolong the life of your logic board connectors.
This is my first application. I appreciate any bugs or feature request you might have to be posted through a positive review rating and comment. In doing so, I promise to ensure this application will be updated to fit your needs and remain free of cost and any ads.
Main test items:
※ CPU and ROM tests
※ 2D graphics test
※ 3D graphics test
※ Database IO test
※ SD card IO test
After testing the app will show you the detailed performance scores including: RAM, CPU integer, CPU float-point and etc.
(5000 points and above) good
(3000-5000 points) normal
(3000 points or less) poor
Never need to worry about your phone! "System Test" will be your phone performance assistant!
• Brand name,Industrial design name,Product name,Your phone number,Your voice mail number,Device id,Network country,Sim serial number,Software version,Dns and Ip number,Cpu,memory,process info
• You can email all information with email option
• Pro version available
For the first time an application that test and check your device.
This testing application lets you test all phone components.
This testing application test:
* WiFi communication components, cellular and bluetooth.
* GPS ,Accelerometer, Gyroscope sensors
* Main Camera and front camera.
Sensor tester is a free, light and easy-to-use app that provides information about your device, and let you detect, monitor and log your sensors output. At the beginning, it performs a test, in order to verify which ones of the
common sensors are available on your device. After the test a simple interface allows you to log, monitor, and get information about every single sensor.
Multiple sensors can be selected at once and logged in a .csv file that will be stored in your phone memory or in your SD card. The logging frequency can be specified.
Additional info about the sensor manufacturer, version, maximum range, power consumption and resolution are given.
It will give you access to:
- Proximity sensor
- Light sensor
- Magnetic field sensor
- Orientation sensor
- Pressure sensor
- Temperature sensor
- Battery level indicator
- Sensor detection
- Multiple sensors logging
- Logging frequency selection
- Maximum range identification
- Resolution identification
- Power consumption monitoring
- Manufacturer identification
- Sensor version identification
- CSV format for log files
Its prime purpose is to be a battery saver and to save as much battery as possible, but it can be used to overclock at the same time (if the kernel of your device supports it).
Depending on triggers (based on the battery) different profiles are loaded. Each trigger has different profiles depending of the the state of your phone (if it is locked, on battery, on power or a phone call is being done).
A profile can modify the following:
* The CPU governor, its thresholds and min/max frequencies off your CPU (i.e. setCPU speed).
* The state of services like:
- mobiledata connection
- 3G/2G switch
- background sync
- airplane mode
Configurations (i.e. a set of trigger and profiles) can be loaded based on the time of the day and the day of the week. This allows you to set a different behaviour during the night or the weekend.
In praise of CyanogenMod... ;)
If you use and like this app please subscribe to the mailing list firstname.lastname@example.org and participate in the forums on https://sourceforge.net/projects/cputuner/ (Project webpage).
You can follow CPU tuner on: https://plus.google.com/109797451979104819882
If you want to help translating please join in at http://www.getlocalization.com/cputuner/.
Please report errors in a mail to the address listed below not in a market comment.
You best generate a capabilities report first, by going to settings then to backend and choose capabilities report, when it is done hit send (and save the mail as draft). Then describe your issue (and if possible attach a logcat output along with the zip file from the report).
A note on permissions: Yes there are a lot and potentially dangerous permissions needed, but cpu tuner does not request the network communication permission which means that cpu tuner cannot send any information back. Further more cpu tuner is opensource so you can browse the code and check....
The implemented functionality is to connect automatically to your IOIO board and show you all informationen about its hardware and software IDs. With the toggle button, the yellow onboard led can be swichted on and off.
When you are succesfully connected to IOIO we would be happy if you clicked on the feedback button to send us automatically all the information which are displayed on the screen. With the feedback we try to update these two pages:
Do you need to check your phones LCD screen for dead and stuck pixels. Usefull especially when buying used phones. Install this very small and simple app. This application will cycle colors that will be able to display non-working pixels.
Tap the screen to view next color or to stop color-cycling when it is running.
Stuck pixels are often incorrectly referred to as "dead pixels", which have a similar appearance. In a dead pixel, all three sub-pixels are permanently off, producing a pixel which is permanently white for TN panels and black for other types of panels. - Wikipedia
Disclaimer: This application will not fix dead pixels. Due to different LCD manufacturing techniques and technologies, this application does not guarantee to fix all found LCD problems. The fast color transition effects may potentially trigger seizures to people with photosensitive epilepsy. Viewer discretion is advised.
Better know your phone by -
1. check the phone's detail hardware information;
2. run performance test and compare with other phones in the world.
This is a tool for Samsung Galaxy S3/4/5 & Note 2/3/4 users to check if their phone isn't a cheap fake clone. It highlights device information that does not match Samsung Galaxy S3/S4/S5/Note 2/Note 3/Note 4 and helps users to tell if their phone is genuine.
Example of FAKE GALAXY S4 -
cpuName: ARMv7 Processor rev 2 (v7l)
screenResolution: 1280 * 720
Support list of Galaxy S4 variants:
GT-I9500， GT-I9502, GT-I9505, GT-I9506, GT-I9508, SCH-I959, SGH-I337, SPH-L720, SHV-E300S,
SGH-M919, SHV-E300L/S/K, SCH-I545, SGH-M919, SCH-R970, SC-04E, SGH-I537, GT-SC04E,
Galaxy S4 Mini, Galaxy S4 Active
Support list of Galaxy S3 variants:
GT-I9300, GT-I9300T, SCH-I939, SGH-I748, SHV-E200K, SHV-E200S,
SHW-M440S, SHV-E210K, SHV-E210L, SHV-E210S, GT-I9303T, SC-06D, SCH-I535, SCH-R530,
SGH-I747, SGH-I747M, SGH-T999, SGH-T999V, SPH-L710, SCH-I747, GT-I9308
Support list of Galaxy Note 2 variants:
GT-N7100, GT-N7102, GT-N7105, GT-N7108, SCH-I605, SCH-R950, SGH-I317,
SGH-I317M, SGH-T889, SGH-T889V, SPH-L900, SCH-N719, SGH-N025, SC-02E, SHV-E250K, SHV-E250L, SHV-E250S
Offical website of this app: http://xihuanat.com/galaxy
You'll be able to test the following:
Accelerometer, gyroscope, compass, proximity sensor, pressure sensor... You'll be able to check which sensors are supported by your phone and all the information and values provided for each sensor.
You'll be able to check your LAN status: internal & external IP, gateway, DHCP server...
Signal, network type, external IP, SIM data...
You'll see the real data provided by the GPS: satellites, latitude, longitude, altitude, speed...
Level of charge, time on, temperature, health...
How many points of contact does your device recognize?
Information about hardware and software like CPU, RAM, kernel version, screen...
This app is similar to EVEREST or AIDA64, but apart from showing the components and system information, it also shows sensors readings.
The Pro version of Phone Tester displays more information (CPU speed, phone memory, sd card memory) and removes the ads.
Using the GPS, you will be able to do the next tests:
-Time elapsed in accelerate from 0 to 30, 45, 60 and 75 mph (or to 50, 75, 100 and 125 km/h).
-Meters covered in 10, 20 and 30 seconds.
-Time elapsed in cover 500 and 1000 meters.
-Time elapsed in brake from the actual speed to 0.
•Lap time: you will be asked to set the start/finish point, and every time this position is detected, a new lap will start. At the end, you'll have some statics:
-Best lap time.
-Number of laps.
Once you finish a test, you'll see your results with some statics and a map with your route. You could save all the results to check your own records whenever you want.