The application allows you to calculate the mass of products from metal knowing the length, or the length of knowing the mass.
This is a free version that contains advertising. To support the developer and get rid of banner ads, you can buy a version without ads.
ГОСТ 26020 - 83
СТО АСЧМ 20-93
IPN DIN 1025-1
IPE Euronorm 19-57
HEB Euronorm 53-62
HEA Euronorm 53-62
HEM Euronorm 53-62
UPN DIN 1026 -1
UPE EN 10279: 2000
IS 808: 1989
S beam - American standard sections
HP - American wide flange bearing piles
C - American standard channels
ГОСТ 21937-76 полособульб,
HD - Wide flange columns ASTM A 6/A 6M,
HL - European extra wide flange sections ASTM A 6/A 6M - 07,
U - European channels,
IFB - Assymetric Integrated floor beam,
SFB - Assymetric Slim floor beam
W sections - American wide flange steel ASTM A 6/A 6M
MC - American channels ASTM A 6/A 6M
UB - British universal sections BS 4-1
J - British joists with taper flanges BS 4-1
UC - British universal columns BS 4-1
UBP - British universal bearing piles with wide flanges BS 4-1
PFC - British parallel flange channels BS 4-1
CH - British channels with taper flanges BS 4-1
H - Japanese H sections JIS G 3192
You can specify the total fluid flow in GPM (or L/s) and one of either unit head loss (ft/100ft), pipe internal diameter (inches) or fluid velocity (ft/s) parameters. The results include both the exact and nominal pipe diameters and the calculated velocity and total head loss. If you are analyzing an existing pipe system, there is an option to input the existing pipe internal diameter and one of either unit head loss or fluid velocity parameters to derive the calculated fluid flow and other remaining properties.
You can specify additional parameters such as the type of liquid, various properties of the liquid, the pipe material type, the total length of pipe, quantities for up to 11 different types of pipe fittings, and much more. You can also choose to display values in either english or metric units.
This application includes built-in pipe fitting equivalent length and nominal pipe sizing tables for a wide variety of pipe material types and diameters.
This application uses slider controls that allow you to quickly increment or decrement the input values and immediately observe the calculated results. You can also manually input exact values.
Lastly, you can email inputs and results to any email address.
This application was designed by Carmel Software Corporation, a leader in HVAC design software since 1995. In fact, Autodesk (the makers of AutoCAD) acquired our load calculation software and incorporated it into their leading 3D modeling software called Revit.
✔ Access to all upcoming ASTM Meetings
✔ Full up-to-date schedule of events
✔ Floor plan for all meetings
✔ Venue contact info and directions
✔ Local places from Yelp
✔ ASTM Contact information
✔ ...much more, download and see
m = Pi * ro * S * (D - S) * L
Mass of rectangular and square pipes is calculated according to the interpolational formula. Node points are masses of pipes according to the State Standard 8645-68 /Steel rectangular pipes/ and State Standard 8639-82 /Steel square pipes/. Mass of pipes with standard proportions corresponds to State Standard. If the proportions of a pipe are not standard the following formula is used (according to the Rosov N. Reference-book. Massofonemetreofapipe. M. Metallurgy, 1966):
For PP-R pipes and fittings:
- Pressure losses
- Heat losses
- Service life of PP-R pipes
- Linear expansion
- Expansion Elbow
- Expansion Loop values instead of you.
For Spira PVC-U Pipes:
- Determination of diameter
- Compressive Hoop Streess
- Vertical Deflection
- External Buckling Capacity
Published by AMI Plastics, it covers the latest developments in materials and processing technology, as well as global business news and exclusive market analysis.
Pipe and Profile Extrusion is written for anyone involved in the supply chain for plastic pipes, tubes and profiles. This app provides access to past and current issues free-of-charge.
Like us on Facebook
"Available for the Android and Iphone"
Pocket Pipe Organizer will run all of your pipe apps from one interface. CLICK LINK to Download
- Input Values as Fractions
- Input Values as Metric
- Outputs values as fractions
- Outputs values as Decimal
- Choose to calculate 8, 16, 32, or 64 Ordinate lines for making templates
- Calculate Concentric and Eccentric fit up
- Values for Saddle In and Saddle on fit up
- Calculates up to 64 ordinate lines for large pipe
- Straight up awesome tool.
Message me using the Feedback screen inside the app if you have any questions on how to use the ordinate values generated. I will be more than happy to help.
Find Me on Facebook
Lateral Pipe Calculator
Socket Pipe Calculator
Pipe Support Calculator
Mitered Pipe Calculator
Pipe Fitter Calc (FREE)
Pocket Pipe Organizer (FREE)
Your feedback is always welcome on this app, as we are always improving its functionality. if for any reason your device has an issue on install or functionality please let us know. We will fix it. We want everyone to be able to utilize this tool at work to improve their productivity and value as a pipefitter/Fabricator.
Contact us either by:
(our webpage has a comment form. Enter your info and comments there as well as request to receive updates on existing and new products to improve your workflow)
We have unveiled out referral program. Click the link to read more about it.
Please note we make no claim or responsibility in the values generated and the user takes sole responsibility when using this application. Thank you.
Calculate pipe lengths more efficiently and reduce waste through incorrect calculations. Forget the 'fit by eye' and use this app to get a great fit between pipes.
Using the simple yet effective interface, you can carry out various calculations to determine the travel / set and run for pipes.
Using industry standard pipe angles such as 22.5 45 and 60 degrees, you can use any one of the 3 calculator functions to help with your pipe calculations.
Function 1 - Simple Offset Calculator
Enter the travel to calculate the run or enter the run to calculate the set all based on 3 industry standard angles.
Function 2 - Calculate the Set / Travel or Run
Use this function to calculate the travel , set or run between two pipe fittings. Using this feature allows you to position a pipe fitting precisely or measure a joining pipe precisely.
Function 3 - Rolling Offset.
Need to calculate the offset between two pipes that are on different horizontal and vertical positions? Don;t worry as you can use this feature to calculate the setback and diagonal required for the pipe. Enter the rise and offset and the calculator will determine the diagonal length of pipe required and the setback between the two pipe fittings. Choose from industry standard fitting angles to customise the calculations to your specific needs.
We are always happy to receive feedback to our support email which help to enhance and improve future free updates.
Please note that we try as much as possible to ensure the accuracy of any of the results however we cannot accept any liability of loss or damage from using the results generated in this application.
Please note this application requires Adobe Air and the layout has not been optimised for tablets yet.
While the developers of this application make every effort to deliver high quality products, we do not guarantee that our products are free from defects or errors. Our software is provided “as is," and you use the software at your own risk. We recommend that you seek the advice of a certified professional before drawing any conclusions from any calculations generated from the software.
We make no warranties as to performance, merchantability, fitness for a particular purpose, or any other warranties whether expressed or implied.
No oral or written communication from or information provided shall create a warranty.
Under no circumstances shall the developers of this application be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this software, even if we have been advised of the possibility of such damages.
The developers of the software cannot accept liability for any loss, damage or injury as a result of using the results generated from our software.
Die Suchergebnisse der App liefern zudem alle bibliographischen Grundinformationen sowie die kompletten Einführungsbeiträge aller DIN-Normen.
Zusätzliche Features der DIN Info sind aktuelle Neuigkeiten aus dem DIN Deutsches Institut für Normung e. V. und allgemeine, wichtige Informationen über das DIN und die DIN-Gruppe.
Regelsetzer: DIN, ISO, AFNOR (FR), ASME (US), ASTM (US), AWS (US), BSI (GB), DVS, IEEE (US), JIS (JP), OENORM (AT), SAE (US), SNV (CH), VDI
1) Air cooler (NOW FOR FREE!);
2) Control valve (liquids) (AVAILABLE ONLY IN FULL VERSION);
3) Flow through orifice (AVAILABLE ONLY IN FULL VERSION);
4) Flash steam (AVAILABLE ONLY IN FULL VERSION);
5) Gas compressor;
6) Gas Properties (AVAILABLE ONLY IN FULL VERSION);
7) Gas turbine (AVAILABLE ONLY IN FULL VERSION);
8) Heat exchanger simulator (AVAILABLE ONLY IN FULL VERSION);
9) Packed tower (AVAILABLE ONLY IN FULL VERSION);
10) Pressure drop (AVAILABLE ONLY IN FULL VERSION);
12) Simulators: selection of thermodynamic package (NOW FOR FREE!);
13) Steam ejector (AVAILABLE ONLY IN FULL VERSION);
14) Steam turbine (AVAILABLE ONLY IN FULL VERSION);
15) Unit converter
*** AIR COOLER ***
The short-cut design procedure adopted in this sheet, can be used for rough sizing and cost estimating purposes. The procedure yields estimates of plot area, fan power requirements, and finned surface area for a typical air-cooled exchanger.
*** CONTROL VALVES (for liquids) ***
This sheet allows you to calculate globe valve's opening for liquid flow.
It can help you to verify the pressure drop of a globe valve for certain flow condition or to calculate unknown mass flow knowing valve's opening.
*** COMPRESSOR ***
This sheet allows you to estimate the absorbed power of a multistage compressor.
***FLOW THROUGH ORIFICE ***
This sheet allows you to calculate mass flowrate through a orifice plate.
***FLASH STEAM ***
This sheet allows you to estimate the flash steam released from hot condensate when its pressure is reduced.
*** GAS PROPERTIES ***
This sheet allows you to calculate the following properties for a gas:
- Molecular weight;
- Critical temperature and pressure;
- Acentric factor;
- Heat capacity;
- Thermal conductivity;
- Compressibility factor;
- Vapor pressure.
*** GAS TURBINE ***
This sheet allows you to calculate the perfomance of a gas turbine (simple cycle).
Two calculation mode are implemented:
> Check mode.
> Simulation mode.
Calculations are made under the assumption of air standard Brayton cycle.
*** HEAT EXCHANGER SIMULATOR ***
This sheet allows you to calculate outlet temperatures from existing shell&tube exchanger, if you know only inlet conditions of the fluids.
*** PRESSURE DROP ***
This sheet allows you to calculate pressure drop for liquids and gases along circular pipe.
Pressure loss in piping without any size changes occurs due to friction beetween the fluid and the pipe walls.
*** SIMULATORS: SELECTION OF THERMODYNAMIC PACKAGE ***
This sheet helps you to select right property package while using process simulators.
*** PUMP ***
This sheet allows you to calculate the perfomance of a pump in terms of absorbed power and efficiency.
> Check mode - the app calculates: hydraulic head, absorbed power (knowing voltage and current) and pump efficiency.
> Simulation mode - assuming pump efficiency, the app calculates hydraulic head and absorbed power.
*** STEAM TURBINE ***
This sheet allows you to calculate: a)Produced power, b)Specific steam consumption, c)Outlet temperature d)Outlet vapor fraction e) Cooling water flowrate & Condenser duty (if a condenser is present).
Necessary input data are: a)Steam flowrate , b)Inlet steam conditions (P-T), c)Outlet pressure d)Turbine efficiency (due to the no-isentropic expansion of steam along turbine), e) Temperatures of cooling water (if a condenser is present).
*** STEAM EJECTOR ***
This sheet allows you to estimate motive steam consumption of a single stage ejector given the following input data: temperature, pressure, flow rate and gas composition of suction mixture.
*** PACKED TOWER ***
This sheet allows you to estimate %flooding and pressure drop for packed fractionators.
*** UNIT CONVERTER ***
A classic unit converter.
******** SOON MORE FREE UPDATES ********
Keywords: chemical engineering , process engineering , industry , tools
국제표준총랍앱은 국제표준서의 간략한 서지정보를 제공합니다. (표준번호, 표준명, 발간일, 개요, ICS Code, TC정보, 대응표준)
이 앱은 다음과 같은 기능을 제공합니다.
1. ISO 검색 : 표준명의 키워드/ 표준번호/ ICS코드/ TC코드/ 발간일을 선택하여 검색합니다.
2. IEC 검색 : 표준명의 키워드/ 표준번호/ ICS코드/ TC코드/ 발간일을 선택하여 검색합니다.
※ 추후 업데이트를 통해 더 많은 국제 표준 정보를 제공할 예정입니다.
3. 즐겨찾기기능 : 검색했던 총람을 즐겨찾기에 추가하여 좀 더 편리하게 이용합니다.
4. 이용안내기능 : 본 앱의 이용방법과 국제표준, 국제표준구매에 대한 안내를 합니다.
5. 국제표준 제안신청 : 국제표준화기관에 국제표준을 제안하는데 관련한 안내입니다.
기술표준원에서는 표준의 보급과 활용을 위하여 다음과 같은 앱 6종을 서비스합니다. 많은 관심과 이용 부탁드립니다.
1. KS 용어사전: KS와 관련한 12만여건의 용어를 제공합니다.
2. KS표준총람: 해당 KS표준의 서지정보를 제공합니다.
3. 국제표준총람: 해당 국제표준의 서지정보를 제공합니다.
4. 압연/강재 핸드북: 압연강재 관련 표준서의 주요 내용을 제공합니다.
5. 레디믹스트콘크리트 핸드북: 레미콘 관련 표준서의 주요 내용을 제공합니다.
6. KS인증가이드: KS인증을 위한 정보를 제공합니다.
In addition to becoming a daily reference for your jobsite needs, you will also find a complete listing of every event and tradeshow at which you can find Lubrizol CPVC’s staff and piping system specialists, and get contact information for all Lubrizol CPVC offices.
Don’t miss all of the product information and new product innovation and launch detail about each of our CPVC products – FlowGuard® Pipe and Fittings, Blazemaster® Fire Sprinkler Systems and Corzan® Industrial Products Systems – and find out how Lubrizol CPVC has a product for every piping system need across the globe.
Keywords: FlowGuard,BlazeMaster,Corzan,piping,chlorinated polyvinyl chloride resins,plumbing,fire sprinkler
As of now, DB Library services
• PIPE B36.10,
• FLANGE B16.5,
• VALVE B16.10,
• FITTING B16.9/B16.11,
• ORIFICE FLANGE B16.36
• COMPONENT(Fig.8 and Spacer for Ref.).
If you have installed free version before, remove it first and then install paid version.
Any bugs or improvements,that you reply to, would be reflected positively.
We're hopeful of your choice. Thanks in advance.!!!
- Bore size : NPS / DN
- Dim. size - Imperial Unit(inch) / Metric Unit(mm)
- Dim. values are rounded at three decimal places.(ex. 0.216 to 0.22)
- Most of data have been referenced by 1994 ANSI,ASME Catalog and some data by 2005 edition.
(piping, handbook, pipe, flange)
MSS SP-44 is designated as SERIES A on ASME B16.47, while API-605 as SERIES B.
DB Library services for sizes
- NPS 26 through 60 in MSS SP-44
- NPS 26 through 60 in API-605
- NPS 4 through 144 in AWWA C207
Any bugs or improvements,that you reply to, would be reflected positively.
We're hopeful of your choice. Thanks in advance.!!!
This App is MaxLarge Flanges HandBook 1.x version.
Android 4.4.2 Compatibility issues can not proceed with the update.
MaxLarge Flanges HandBook Pro 2 is on the bottom of it More from developer.