Access all the parameters via bluetooth.
You can change them on the field! Saving your config in diferent files.
- PID and Radio settings read/write
- 4 Aux configuration
- RC channels realtime view
- Motors realtime view
- GPS data and googlemaps positionnig.
- Cli setup (Cli only works for naze32 and freeflight boards)
Please visit http://code.google.com/p/naze32configurator/ for more information.
It displays all available data from a flight controller in a convenient way.
It allows you to easily configure and tune your model from Android device, so you don't have to take your laptop to the flying field.
It supports direct USB connection (Android >3.1) as well as Bluetooth, WiFi and 3DR Radio.
- MultiWii 2.2 and later
More information can be found in the help file :
Or on the forum:
If you want to see your language in this app please go to
Join the G+ community and register as a tester to get latest alpha/beta versions:
This is just a stub for donations, goto https://play.google.com/store/apps/details?id=com.droidplanner for the real and free App. But consider buying this stub to support the development.
This is a tool to configure the settings of a Tricopter, Quadcopter, Hexacopter or Octocopter based on the MultiWii Project software.
To use this tool it is required to have a Bluetooth dongle to connect into the MultiWii board and of course the MultiWii software running.
You can get a BT dongle already configure from the URL bellow:
Currently working with MultiWii versions:
More details about the MultiWii board can be found here:
For more details about this application and help go here:
It's a fun way to show off your phone, especially if you're an aviation enthusiast, but it is not FAA rated nor meant to replace actual avionics. Phone sensors work on completely different principles!
FlightPanel is only as accurate as your phone's sensors. Many of the gauges in FlightPanel require a clear GPS signal to work properly. Slow or noisy GPS updates, magnetic compass calibration issues, etc. are problems or limitations with your PHONE'S HARDWARE, not the APP.
The app works on almost all devices, but there are MANY different hardware devices and some work better than others.
Please do not use comments / ratings to report bugs. We cannot contact or help you that way. Send us an email and we'll do our best to help you.
If you are unsatisfied, you can get an instant automatic refund from the Android Market within 15 minutes. Or you can send us an email telling us why and we'll give you a refund.
Easy technical support email built into the app... just select Menu->Help->Get Help by Email
The INOP tags are a new feature which shows gauges that are not (yet) functioning because there is missing or uncalibrated hardware (in the case of the magnetic compass or artificial horizon), or because the GPS is turned off, or has not sent any position data for an extended period of time.
The INOP tags should automatically disappear after calibration or once data arrives from the GPS and the gauges start updating real data. These INOP tags can be hidden via preferences.
- see all flights on a map
- check the Vatsim event calendar for the upcoming events
- check the ATC booking for today
- find out what's going on at your favorite airport.
Because of high requests now also available for other Android versions. This app has been tested only for Android version 2.3. For other versions, it can lead to errors and problems.
The system I created is focused on what I wanted it to do: show me legal restrictions, show me latest news, show me what equipment exists. All focused on quadcopters and multi-rotors in general.
It works by reading the weather data from OpenWeatherMap, map details from GoogleMaps and restrictions/equipment details from my website - JoelLipman.com.
My website is not a social network but follows more of a crowdsourcing principle where members with similar interests can contribute to and improve on the existing data.
It generate routes with SIDs, STARs and NATs and TACAN routes, using updated AIRAC databases. Also , you can set the enroute altitude.
To generate a route , you must write the departure and arrival ICAO airport code.
It works with any flight simulator software like FS2004 and FSX, X-Plane and more.
Made by Mihai Macarie.
Perfect for electricians and electrical professionals in the field or at a jobsite.
Summit Electric Supply’s NEMA Configuration Guide puts over 240 NEMA configurations at your fingertips. This app helps you quickly and easily identify your device so you can move on with your project. Search by NEMA configuration number or enter known information such as voltage, amperage or poles to filter for matches. Tap on an icon and view detailed specifications. Use the handy plug/receptacles cross reference option to quickly find matching configurations.
• Filter by specifications such as amperage, voltage rating, phase, wires, poles, grounding and more
• Compare configurations by image
• Quickly jump to the matching plug/receptacle
• Over 240 configuration illustrations
• Search by NEMA number
• View circuit wiring diagrams
we strongly recommend to refer to documentation before downloading this application.
and watch this video http://youtu.be/-g0Xed_25iY
using Andruav as APM 3G/4G telemetry: http://youtu.be/4yVnnKUJAYQ
using Andruav as Multiwii 3G/4G telemetry: http://youtu.be/rc14SMtm7Yw
setting up Andruav: http://youtu.be/-g0Xed_25iY
Andruav multiple drone tracking: http://youtu.be/bjiFXKu68e8
1- Uses Mobiles as GPS tracker and Camera.
2- Generate KML & KMZ files where images are market on flight path.
3- Uses GPRS connection to provide unlimited range for FPV & UAV control in mobile covered areas.
4- Support multiple tracking and control of different vehicle and via multiple GCS in the same time. An interesting case is letting a friend of yours share with you your flight experience online while he is in another city, country or even continent.
5- Sends online IMU data based on mobile internal sensors.
6- Send SMS messages of Vehicle location in case it is lose connection.
7- Has telemetry port to enable pilots to use it on top of Ardu & Multiwii while still can control these boards from Mission Planner and Multiwii GCS enjoying unlimited range.
More information can be found in the help file : http://www.andruav.com
Or on the forum: http://www.rcgroups.com/forums/showthread.php?t=2301482
ATTENTION: "Please review your country/region policies and regulations for FPV & UAV flying before putting this system on air."
FLY SAFELY: We DO NOT TAKE ANY RESPONSIBILITIES FOR ANY DAMAGE OR INJURY CAUSED DIRECTLY OR INDIRECTLY BY THIS APP.
MavLinkHUB delivers two core functionalities.
As a proxy server - connects your drone (supported interfaces: USB (OTG) or Bluetooth) to the remote Ground Control Station using TCP/IP/UDP protocol stack (possible server modes: TCP point-to-point or UDP broadcast). This way you may transfer MavLink telemetry stream using widely available networks (like WiFi or 3G mobile).
As a protocol analyzer - delivers detailed informations on the MavLink messages passing the core of the application.
Tested for compatibility with:
GCS: Droidplanner, MissionPlanner, QGroundControl
Firmwares: ArduPilot (ArduCopter), MegaPirates.
MavLink low level protocol library based on DroidPlanner project (www.droidplanner.org).
An alternative remote control application for MultiWii based multi-copters.
Requires a multicopter based on MultiWii with a Bluetooth module connected in the serial port.
You must activate the #BTSERIAL flag on MultiWii code.
PID LoopSim is an Android-based simulator for PID practice. It may be used to improve tuning skills by adjusting the PID terms in real time and seeing the reaction of the system. Enter your process characteristics and try out the tuning parameters before applying them in your plant. The simulator shows, in real time, how your process will respond to your tuning parameters based on set point changes.
This PID simulator responds in real-time speed in order to get plant-like experience. This means, the simulation responds at the same speed that the real plant would do in real life, so you can get a feel or tuning loops in the real plant.
For more information and instructions, please visit http://www.droidbus.com/PIDLoopSim/
-VOR and heading displays.
-Show / Hide radial lines
-Optionally, control the flight with the device's accelerometer.
-Test mode. Very similar to FAA VOR orientation questions. Shows you a number of airplanes around a VOR station. You have to choose the right one by adjusting the OBS and reading the instruments.
-Panel can be customize to be on either left or right side of the screen (left-handed people may find it more comfortable to choose the left panel in the settings).
Watch the video Trailer:
Is the following scenario familiar? You receive a holding clearance from ATC, and only have a couple of minutes, sometimes only a few seconds, to choose the correct entry. By the time you've figured out what's going on, you've already passed the holding fix and don't know what to do next.
If this sounds familiar, you're not alone. Confusion during holding entries happens to practically almost every new instrument student. Even instrument-rated pilots occasionally have the same problem — when they don't get enough practice.
Holding Trainer solves this problem and as a result, cuts the time you have to spend on expensive flight and ground lessons. With Holding Trainer, you can practice on your own time and convenience, so that choosing the best holding entry in the air becomes a breeze.
-Entry Trainer - Drills you on choosing the best holding entry. Practice until choosing holding entries becomes second nature and impress your flight instructor with your skills.
-Holding calculator. Solve and visualize any holding scenario by entering your current bearing to the fix and a outbound or inbound holding radial.
-Holding tutorial - learn how to choose the best holding entry quickly and easily.
Holding Trainer for iOS is a complete rewrite based on my popular Flash-based desktop Holding Trainer app available on pilotscafe.com.
***Don't get stuck next time you receive a holding pattern clearance!***
For only a fraction of the cost of one ground lesson with your flight instructor, you can practice this important instrument skill at your own pace and save hundreds of Dollars on figuring out holding entries in the air.
This is a great tool for anyone training towards their instrument checkride, CFII, proficiency check, or simply trying to improve their holding patterns.
★★★★★ Read about it here: http://www.aopa.org/flightplanning/articles/2013/130226app-review.html ★★★★★
IFR flight training is complex — We help make it easier!
A must have tool for CFIIs, student and instrument pilots!
Practice the use of aviation navigational equipment on your mobile device.
Simulates VOR, HSI, RMI, ADF, DME and ILS navigation.
The most popular radio navigation trainer for pilots on iOS, now available for Android!
-user reviews (all platforms)
"***** Before I used this app all this VOR orientation was so complicated, and now it's clear as ice!"
"***** I have been looking for an app such as this to teach my students"
"***** I teach instruments for the US Army at Ft Rucker, Al. This is a very good app to demonstrate the effects of wind on your course and how various MH effects the correcting for wind drift. It's also very useful in explaining, demonstrating and adaptive practice of track/course intercepts."
"***** Easy to use, perfectly designed and helping to understand basic navigation stuff. Highly recommended for student pilots, instrument applicant and CFI's."
Nav Trainer is a great tool for instrument, student pilots and flight instructors. Practice the use of aviation navigational equipment on your mobile device.
Includes VOR, HSI, RMI, ADF, DME and ILS simulation.
-Improve your situational awareness under IFR.
-Save time and money on your instrument and initial flight training.
-Prepare for your instrument rating or proficiency check.
-Test your progress with the test modes.
-Flight instructors: the perfect tool to help you easily explain and demonstrate complex radio navigation concepts to your students.
-VOR\NDB trainer screen: Simulates VOR and NDB navigation using VOR, HSI, fixed card ADF and RMI displays.
-ILS trainer with both VOR and HSI displays.
-DME visualization screen - demonstrates how DME slant range distance is affected by ground distance and altitude.
-Test mode - generates phantom aircraft around the navaids. Your goal is to find the correct aircraft position.
-Drag and drop the aircraft and nav fix around the screen.
-Fly! mode - Make the airplane fly around the screen. great for practicing intercepting and tracking courses.
-Wind direction & velocity control.
-Aircraft tracing (contrail mode).
-Accelerometer support for aircraft control.
Easy to control:
-Toggle VOR sectors visualization on/off.
-Auto tune OBS by pressing the OBS knob.
-Auto turn the aircraft towards the nav fix by tapping the aircraft symbol.
-Change aircraft headings by flicking your finger over the heading indicator.
-Tune the OBS by dragging your finger up/down over the HSI/VOR displays or over the OBS knob.
The developer is a Gold Seal CFI/CFII/MEI and part 121 airline First officer who thoroughly understands pilot's flight training struggles and needs.
For comments, feature requests or bug reports, if you have the app, please take the survey at http://bit.ly/hCAqgF