Find SoundCheckPro if you would like to change the volume of your Android device from your connected SmartWatch accessory.
LiveWare™ extension for SmartWatch
Thank you everyone for making this the top spectrum analyser application on the market. I am dedicated to making this app work well for you! Risk-free purchase; I will refund your money (even beyond Google's 15 min window) if the app does not work for you.
* Both Logarithmic & Linear frequency axis
* Smooth, joyful pinch-to-zoom! Pinch to zoom in on ANY signal section... and zoom... and zoom...
* Pan (vertical and horizontal) by simply dragging the screen
* Dynamically adjusting FFT size, up to 16384 bins (for 2-3 Hz accuracy!), based on the optimal size for your screen.
* Exponential averaging (adjustable)
* Peak hold overlay
* Share screen snapshots easily
* Range set - full audio range from 20Hz, up to 22kHz!
* Peak & valley measurements with crossbar tools
* Adjustable dB levels for ceiling / floor
* And many more!
Designed & tested to work on Honeycomb, Gingerbread, and Froyo.
If you have ANY problems with this release, or requests - email email@example.com. I *will* respond, and work towards fixing your issue. And if I can't fix it, I will give you a full refund.
The screenshots show some of the dynamic zooming capabilities, and the linear vs logarithmic modes. The first screenshot shows the analyser in linear mode, while the next shows logarithmic. The screenshots show the mic on the OG Droid phone capturing a test tone at 21kHz, in addition to other frequencies. Nice real-time analyzer!
The last two screenshots show a zoomed in signal at the lower frequency range - same signal sample (paused again), with two different windows applied.
I am honoured and humbled by each and every purchase made; thank you!
Email for contact is firstname.lastname@example.org
Thank you everyone for purchasing - the response has been great! I appreciate all the encouraging emails.
Purchases are risk free - I offer refunds past the 15-minute window if it does not work on your hardware for some reason.
H/W Updates across all versions:
All reported hardware issues have been resolved - these are listed below for documentation:
Fix for Toshiba Thrive, and Dell Streak mic input issue.
Fix for Samsung Captivate (Galaxy S SGH)! Thanks for the report Red Baron - if this update fixes your problem, I would appreciate an update to your review.
Contains workaround for the Atrix phone hardware microphone issue. UPDATE: Fix confirmed! Thank you Motorola engineering for the workaround.
My goal is to make a useful spectrum / spectral analyser tool for audio professionals, engineers, installers, etc. Signal processing is useful in many fields, from microphone analysis to RTA, to engineering / technical fields. Let me know how you use it! I find it fascinating the different uses.
Here are the permissions the app requests, and why:
To capture audio from the Microphone to display
Save the graph to an image, and send it via email.
Please feel free to email me with any questions, concerns, requests, etc. I love feedback: email@example.com
Recommended by "Sound and Vision" magazine.
Features 1/1, 1/3 & 1/6 octave RTA modes, Leq (wideband, Octave, variable duration), RT60 (wideband, Octave), Spectrogram, Peak frequency, Fast, Medium & Slow filters, Flat & A/C Weighting and film industry X Curve, Averaging, SPL Chart Recorder, Noise Criteria, White/Pink Noise, Sine, Square, Triangle, Sweep, Ramp and Impulse signals & loudspeaker polarity checker, L/R select. RTA Store & Load, Hann windows, "Keep Screen On", pinch to zoom, scroll to center.
Exclusive ISO 1/3 Octave Calibration - correct for your phone's microphone response. Octave calibration discs are moved up or down to obtain a flat response, and match the overall SPL to that of an external meter. Save/Restore of Cal files (Dayton Audio iMM-6 also supported).
Use: home theater, audio engineer, car audio, etc
AudioTool FFTs sets of samples recorded at the microphone. Aliasing reduced by Hann windowing. SPL calculated in realtime. Spectra may be saved as files on the SD card, then loaded and displayed with the live spectrum. The "Store" button stores the current live spectrum - "Load" shows a list of stored spectra to select.
To hide the buttons, tap the screen. To restore them, tap again. To zoom the scale, pinch the screen. To move the scale, drag it up or down (left or right).
The deciBel meter uses IIR filters and exponential averaging to calculate Flat, A and C weighted response at speeds of Fast, Medium and Slow speeds.
A pair of cursors can be shown on the RTA and Chart Recorder displays: each can be moved to any position, and will display the SPL & time/frequency values there. Initially, both cursors are positioned mid-screen - simply drag them to a new position with the fingertip. The cursors can be turned on and off in the Menu.
The loudspeaker polarity checker can be used to check whether a loudspeaker is wired in phase: connect the AudioTool output to the speaker under test, select "Polarity" from the signal generator screen, then return to the RTA screen. If the speaker is out of phase (polarity reversed) AudioTool will show "Pol ---", otherwise "Pol +++" if the speaker is in phase.
The Noise Criteria (available from the Menu) function shows a set of NC contours overlaid on the 1/1 Octave RTA display and the calculated real time current NC value is also shown.
The Chart Recorder shows a moving trace of the SPL measurements over the last few minutes.
RT60 measurements can be made by starting the RT60 component using the "RT60" button, and then using a loud clap (or similar) to trigger the measurement. RT60 can also be used with Pink Noise from the AudioTool generator. RT60 times measure how much reverberation or echo there is in a room or auditorium.
The Signal Generator generates White and Pink Noise, Sine, Square, Triangle and Ramp waves, Sine Wave Sweeps and Impulses. The generator uses multiple cycled buffers, refreshed randomly so ensuring truly random White/Pink noise. Pink Noise algorithm uses Kemmet's method to adjust White into Pink.
The frequency accuracy of the generated periodic signals is typically around 1%. Sine wave fidelity is good throughout most of the audio range. Other signals' leading and trailing edges show ringing and decreasing frequency response artifacts in the upper ranges, depending on the Android used.
Please consult the online manual for complete descriptions of the AudioTool features:
Please join the friendly AudioTool Discussion Group to request features, find Calibration files, or report problems. Feedback is always welcome:
Disclaimer: AudioTool's performance depends on your Android hardware, and is not guaranteed to meet any audio measurement or safety standards.