This app requires that you already have root, or a custom recovery image to work.
Note: App and binary will have different versions. The app is updated more often than the binary is.
This app cannot be uninstalled if it was installed with your ROM or root. If there is no uninstall option, it's because you placed it in /system/app, not me. It is impossible for an app to be installed in /system/app by the Play store. In fact, the entire /system partition is read only at runtime. The only way for an app to be placed in /system/app is via a rooting process (which usually installs Superuser), or by remounting the system partition as read/write and manually putting it there.
Permissions requested are for:
Internet - updating the binary
External storage - backup/restore for elite users
NFC - creating an allow tag for elite users
Boot completed - fix database on boot
Support request emails that simply say "Doesn't work" or something to that effect are automatically deleted by our stupidity filter and will not be answered.
!!! SuperSU requires a rooted device !!!
SuperSU allows for advanced management of Superuser access rights for all the apps on your device that need root. SuperSU has been built from the ground up to counter a number of problems with other Superuser access management tools.
- Superuser access prompt
- Superuser access logging
- Superuser access notifications
- Per-app notification configuration
- Temporary unroot
- Deep process detection (no more unknowns)
- Works in recovery (no more segfaulting)
- Works when Android isn't properly booted
- Works with non-standard shell locations
- Always runs in ghost mode
- Wake on prompt
- Convert to /system app
- Complete unroot
- Backup script to survive CyanogenMod nightlies
- Icon selectable from 5 options + invisible
- Theme selectable from 4 options
- Launch from dialer: *#*#1234#*#* or *#*#7873778#*#* (*#*#SUPERSU#*#*)
NOTE: Not all phones take both codes. On some phones you need to use single *# instead of double *#*#
The Pro version additionally offers:
- OTA survival mode (no guarantees)
- Full color-coded command content logging (input/output/error)
- Per-app logging configuration
- Per-app user override
- Grant/deny root to an app for a set amount of time
- PIN protection
- Per-app PIN protection
- Adjust auto-deny countdown
The discussion and support thread can be found on XDA-Developers here:
This is meant to replace Superuser (if installed), you use either one or the other. You cannot combine them. Statements that this breaks Superuser are therefore completely nonsensical.
NOTICE: A SPECIAL PROCEDURE IS NEEDED FOR UNINSTALLATION. IF YOU DO NOT LIKE THE APP, DO *NOT* JUST UNINSTALL IT, YOU *WILL* LOSE ROOT.
Superuser access management runs through a so called "su binary". There can be only one of these at a time. So if you install SuperSU, your previous superuser access management solution will no longer operate. So if you want to switch back: (1) Open that application, and search for an option for it to install/update/replace the "su binary". (2) Confirm root-using apps are using the superuser solution you want. (3) Uninstall SuperSU.
Want to help translate SuperSU ? See http://www.getlocalization.com/supersu/ !
These are completely optional and more like donations. They do not unlock any functionality.
This app is designed to fix update problems that come from mismatched signatures between Superuser.apk on your phone, and Superuser.apk on the Market. If successful, this app will let you update from the market even if you've had trouble before.
Special thanks to Joël Bourquard for technical help writing this, and @fitsnugly on twitter for the icon.
Note: This app requires busybox. A static build of busybox is included in the app, but is only used if you do not have busybox already installed. The included version should work on most phones. If it does not work for you, please email me at the link below so we can get it working.
Support request emails that simply say "Doesn't work" or something to that effect are automatically deleted by our stupidity filter and will not be answered.
Issues installing or upgrading from another Superuser or SuperSU? Try the recovery zip installation linked below.
Apps being denied? Disable the "Declared Permission" setting, and delete the "Deny" policies.
This app requires that you already have root, or a custom recovery image to work.
Apps not being remembered? Start the superuser app to make sure the su binary is up to date.
* Multiuser support
* OPEN SOURCE (https://github.com/koush/Superuser)
* Pin protection
* Manifest permission support
* Per app configuration
* Request timeout
* Proper Tablet UX
Why another Superuser?
* Superuser should be open source. It's the gateway to root on your device. It must be open for independent security analysis. Obscurity (closed source) is not security.
* Superuser should be NDK buildable. No internal Android references.
* Superuser should also be AOSP buildable for those that want to embed it in their ROM.
* Superuser should also be AOSP embeddable, meaning a ROM can easily embed it into their Settings app.
* Maintenance and updates on both the market and source repositories should be timely.
* If something goes wrong, I can fix it.
* Handle multiuser (4.2+) properly
* Handle concurrent su requests properly
Manual installation with the recovery zip:
Recommended if you are having installation issues or are not rooted
This application, Root Checker (Basic), will allow the user to confirm they have proper root (superuser) access configured and operational.
*Feel free to email me with any questions. I always reply!*
This application provides even the newest Android user with a simple method to check their device for root (administrator or superuser) access. The application provides a very simple user interface that easily notifies the user whether or not they have properly setup root access.
This application will test the device for root access using a very simple, quick, and reliable method. The su binary is the most common binary used on Android devices to grant and manage root access. Root Checker will check and verify that the su binary is located in a standard location on the device. In addition, Root Checker will verify that the su binary is properly functioning in granting root access.
Many times users experience issues along the path of installing, configuring, and gaining root access. For some users the process can seem complex while for others the process can seem simple. Regardless of the user's technical skill set, Root Checker, will quickly and correctly verify whether or not root access is 100% functioning. The process of confirming root access is sometimes known by other terms such as, gaining superuser access or gaining administrator access. Root Checker covers all these terms as they relate to one core function, being able to execute commands through the su binary with root access.
If the Superuser management applications (SuperSU, etc.) are installed and working properly, these applications will prompt the user to accept or deny the root access request from Root Checker. Accepting the request will allow Root Checker to check for root access. Denying the request will result in Root Checker reporting no root access.
Please don't leave negative feedback about a concern, bug or issue! Instead, please email me, tweet me, contact me on my web site - https://joeykrim.com/contact, IRC, or on the forums (XDA, RootzWiki, SDX, etc.) with your feedback, suggestions and comments!
I do my best to assist as many people as possible and appreciate all the support that has made this application successful! Thank you!
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Ever wanted to unlock your linux based phones full potential?
Of course you do. Take a look below at the full list of feature that Root Toolbox can offer you!
And now for a limited time only Root Toolbox Pro is half price!
- Enable battery percentage (4.4+)
- Fix market links
- Fix permissions
- Install app from sdcard
- Hotboot/Reboot/Reboot recovery/Reboot bootloader/Reboot download mode/Poweroff
- Wipe rubbish data
- Wipe battery stats
- Wipe internet cache
- Wipe cache partition/Delvik cache
- Wipe download history
- Smart remount menu
- Daul mount external SDcard
- Rescan storage for new file
- Change sim settings and unlock the market
- Recovery & Boot image option(Flash, backup, restore, erase)
- Clockwork mod MD5 sum fixer
- Password protect from childern
I wrote this little root utility for myself to help consolidate and automate some root functions that are available in various other apps, but nowhere all together.
Note: this utility does NOT root your Android™ device--it assumes that your device is already rooted.
If you have problems or issues with the app, please contact me via firstname.lastname@example.org with as much detail as you can provide.
* display current root and device state/status
* reboot options (normal, recovery, bootloader)
* power off device
* remount rootfs (/) and/or /system in read-write or read-only mode; note: remount behavior changed in Android™ 4.2 and higher that causes remount effect to not be usable by apps other than the one that initiated the remount
* save (protect) / restore root function; for 4.2 and earlier devices with ext2/3/4 /system partitons; for 4.3 devices, I've implemented Pau Oliva's 4.3+ keeproot.sh functionality; saving root for 5.0+ has not yet been
* freeze (disable) or thaw (enable) an application (use caution when freezing a system app!); see Settings menu to enable display of system apps
* display system (getprop) property values
* calculate an MD5 or SHA1 checksum on any file (navigate to selected file, long-press filename, select desired action)
* options for selected Nexus devices:
-- flash a stock recovery
-- flash various custom recoveries
-- make recovery "stick" (keep stock recovery from overwriting your custom recovery)
-- identify currently installed recovery
* bootloader lock, unlock, status (select Nexus devices: Galaxy Nexus, Nexus 4, Nexus 5, Nexus 7 (2nd gen 2013), Nexus 10)
* small (<25mb) partion backup function now supported in v3.9; note: this is NOT meant as a Nandroid backup replacement, but for use in backing-up small, critical partitions that to assist with device recovery; also note that a restore function is NOT included since the target partition is likely to still be open/mounted; useful for backing-up special partitions like EFS.
Warning / disclaimer: the author of this app is not responsible for any loss or damage caused by or related to its use.
If you are not comfortable with or knowledgeable about the proper use and functionality of this app, please discontinue its use and uninstall.
If you have any questions or issues, please contact me at email@example.com.
INTERNET - for downloading recoveries from the internet
WRITE_EXTERNAL_STORAGE - this is for the downloaded recoveries and work files used to identify which recovery is currently installed
ACCESS_SUPERUSER permission to support interaction with SuperSU (this permission is now deprecated)
Android™ is a trademark of Google, Inc.
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
"If you’ve ever attempted to root a device prone to difficulties or requiring a trial-and-error type exploit (the Motorola Droid X or T-Mobile MyTouch 3G Slide, for example) then you know how easily it can go wrong. Sometimes the operation fails and you end up with the superuser app installed but without actual root file system access. A quick search for ”lost root” on our forums yields an astonishing 274,000 results. Almost all the visible results link to posts where forum members believe they have lost root access, usually due to updating a ROM or accepting an over-the-air update.
XDA Member android_owl has created an app to help out in these all-too-common situations. SU Checker searches for and identifies Superuser binaries on your device in a flash. It can help check for root if you suspect you may have lost permissions. This great little diagnostic tool and time saver can be found in the release thread or on the Android Market here. Give it a try the next time and let the developer know what you think!
" - xda-developers.com 13/02/2012
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
ROOT IS REQUIRED
Root Cleaner is simple and effective application which a lot increases your peformance by cleaning your system. You can choose between quick cleaning and full cleaning. Quick cleaning cleans your memory, file cache, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Application also contains feature for uninstalling, clearing data and freezing or unfreezing your system and non-system applications.
-Restart system UI
-Clean drop caches
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clean dalvik cache
-Clean init.d folder
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clear app data
-Quick cleaning interval
-Exception list for files and folders
-English, Czech, Slovak, Russian, Italian
IF YOU FIND A BUG OR IF YOU HAVE SOME PROBLEM, CONTACT ME BY EMAIL PLEASE
• Voted #1 TOP ROOT APP on Twitter.
• New DEMO VIDEO: http://youtube.com/watch?v=YU33zabluSY&hd=1
• No icon! Requires the Titanium Backup (free) app (see "More" section below). This key will turn it into PRO.
• The same key can be used on several devices!
• For download issues & support: read below.
PRO Features Added:
[✔] Multiple backups per app
[✔] 0-click batch restore
[✔] Backup/restore SMS,MMS,calls,bookmarks,Wi-Fi AP as XML
[✔] Multi-user support for some apps! (eg: games)
[✔] Batch verification
[✔] Backup apps without closing them!
[✔] Create your own update.zip containing apps+data!
[✔] Restore individual apps+data from non-root ADB backups!
[✔] Restore individual apps+data from CWM backups!
[✔] Restore individual apps+data from TWRP backups!
[✔] Hypershell speed
[✔] Migrate system data across different ROMs
[✔] Market Doctor (relink apps to Market)
[✔] "Destroy all Market links" feature
[✔] Apps freezer (incl. batch support)
[✔] Market "auto updating" manager
[✔] Convert user apps <=> system apps
[✔] Unlimited schedules
[✔] Sync to/from Dropbox (manual/scheduled)
[✔] Sync to/from Box (manual/scheduled)
[✔] Sync to/from Google Drive (manual/scheduled)
[✔] TB Web Server: download/upload your backups as a single ZIP on your computer
[✔] Load/Save a Filter and use it in Widgets/Schedules
[✔] Change the device's Android ID, restore it from a backup or after a factory reset
[✔] Protect backup against deletion
[✔] Send backup (to e-mail/cloud) and import it in 1 click
[✔] Backup→Verify→Un-install an app in one shot
[✔] Freeze/defrost/launch apps in a single click
[✔] CSV export any app DB (e-mail or Google Docs)
[✔] Brand the app with your name
[✔] Bloatware Melter (experimental)
[✔] Convert app data to/from faster WAL DB format
[✔] And more!
[✔] Dalvik cache cleaner
[✔] Integrate system app updates into ROM
[✔] Move apps into ROM
[✔] Integrate Dalvik cache system elements into ROM
What the Press says:
"The Most Essential App For Android" - Tech'n'Life
"NONE can compare with this one" - Android Market Review
"The Best Backup App for Android" - Lifehacker
"The hands down best Backup on the market" - Absolutely Android
"It is a must-have backup app" - Droid Ninja
Support & Upgrades:
• All upgrades are FREE.
• If Market won't download your PRO key: although credit card authorization *usually* occurs instantly, in rare cases it may need up to a few hours to complete. Try the Web version of Play Store. If problem persists, login at checkout.google.com to cancel your order & try again.
• If your PRO key doesn't work (eg: installed before the purchase completed) please un-install it and then reinstall it from the Web version of Play Store.
• We aren't responsible for any currency conversion fees charged by credit card issuers.
• For support please see the Knowledge Base at http://titaniumtrack.com/kb and then e-mail us at the address below.
Here's the older TB Pro demo video:
Thank you for supporting our work!
This application comes without warranty, only use it if you are 100% sure what you are doing!
Improper use can make the system unstable, so please inform yourself if you are unsure about a certain feature!
This app is open source
Device Control is an app to control several features of your device as well as some nice extra features like a Tasker, App Manager, Editors, Entropy Generator, Wireless Filemanager and more.
With Device Control you can tweak and edit:
[+] Device specific features like Knock-On, vibration strength, screen color temperature, LCD power reduce, ...
[+] CPU frequencies, governors, i/o schedulers, ...
[+] GPU frequencies, governors, ...
[+] Kernel specific extras like intelli-plug and intelli-thermal by faux, msm dcvs toggle, mpdecision toggle, power scheduling, power efficient workqueues ...
[+] Voltage Control, Fast Charge and more
Note: Features need to be supported by your device. Unsupported features are getting automatically hidden!
It also can monitor:
[+] Your cpu and battery temperature
[+] Time in state of your cpu
[+] Maximum, minimum and current frequency as well as the governor of your cpu (fully multicore aware and toggle able auto refreshing intervals)
Extra tools like:
[+] Tasker (automatic fstrimming, screen off and on actions ...)
[*] Example: You can configure it to automatically toggle your cpu's frequency to a very low value once your screen turns off, to save battery, and restore the value when you are using your phone again.
[+] Editors (vm, sysctl, build.prop, ...)
[+] Quick tweaks (vm, build.prop, ...)
[+] Wireless Filemanager, allows you to access your device's sdcard / internal storage via any webbrowser
[+] App Manager to view information about the app, kill it, view them on Google Play Store, disable / reenable your apps to prevent them from running and hiding them from launcher
Device Control can automatically restore your settings on boot (sections to restore need to be checked in preferences)
Device Control is 100% ad free and will always be.
No need to spend money, you get every feature without paying or donating.
Device Control is in active development, if you like to contribute to the development or just buy me a beer, you can donate via in app purchases!
Donations are not required but highly appreciated!
Explanation of permissions:
ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: To read your ip address to display it at the Wireless Filemanager
ACCESS_SUPERUSER: Device Control requires root to function properly.
BILLING: For the optional in app donations.
INTERNET: Required for our built-in error reporting service to submit bug reports.
READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE: Needed for the Wireless Filemanager
READ_PHONE_STATE: For better detection of your device.
RECEIVE_BOOT_COMPLETED: To restore your tweaks on boot up of the device.
VIBRATE: To test the vibration strength.
GET_PACKAGE_SIZE: To display size statistics at the app manager
GET_TASKS: To allow to detect running apps and kill them via the app manager
REBOOT, DEVICE_POWER: Used by the flasher to reboot the device without super user permissions on NamelessRom
This app is for rooted devices only! If you don't know what root is then please do not download this app.
This app is also available in ROM Toolbox Pro along with many more features.
If you have any problems and/or questions feel free to email us at firstname.lastname@example.org. We will provide fast and friendly support.
Changing fonts modifies your system files. You should always have a current backup in recovery and know how to restore your device back to stock.
My fonts won't change.
Font Installer overwrites the font files in the /system/fonts directory. To install a font you must have root access and S-OFF (for HTC devices). Some apps use their own font and cannot be overwritten by Font Installer.
Before attempting to install any fonts please make sure you backup your fonts. You should also have a current nandroid backup.
Font Installer needs to overwrite the correct system files. Please make sure you have the correct fonts selected to be overwritten.
If you’re running Android 4.0 ICS or newer, make sure Roboto-Regular.ttf is selected.
If you’re running Android 3.X or earlier, make sure DroidSans.ttf is selected.
If you’re running MIUI, make sure Arial.ttf is selected.
To change which fonts get overwritten open Font Installer and click Menu >> Preferences >> Select Fonts.
How do I restore the original font?
To restore your font to the default system font press the menu button while inside Font Installer, click “Backup and Restore”, and restore the original fonts you had (assuming you made a font backup before changing fonts).
Alternatively, you can choose the accurate font for your Android OS version according to the list below:
If you’re running Android 4.0 ICS or 4.1 JellyBean, install the “Roboto” font.
If you’re running Android 3.X or earlier, install the “DroidSans” font.
If you’re running MIUI, install the “Arial” font.
If all else fails, a last resort would involve re-flashing your ROM or restoring a nandroid backup of the /system partition (a factory reset would not touch the system partition where fonts are stored).
Special characters aren't supported. What's the deal?
Unfortunately we cannot fix this issue. You can install a custom typeface that supports your language or other special characters. First, find the desired font and download it to your SD card. Then, using Font Installer, navigate to the “Local” tab to select the font file and install.
*Optimus safely and effectively improves system performance and battery life by adjusting Android's internal memory settings.
*Optimus has three different settings: Moderate, Balanced and Extreme. It works passively in the background and is truly a "set it and forget it" type app.
-LISTEN TO WHAT OUR FANS SAY...
"Everything you need. This optimizer puts task managers to shame when it comes to accessibility and delivering true performance gains. Not only does it replace the task organizers that are $5 a piece, but it also SEEDS efficiently, which will cost you another few $. To have both in one app is awesome and I'm glad I paid for this."
-IS OPTIMUS SAFE TO USE?
As opposed to other "task killer" apps which can actually cause damage to the Android operating system by force-closing running processes, Optimus uses a safe method of freeing up system memory.
-HOW DOES IT WORK?
Android automatically kills background processes when system memory falls below a certain threshold. Optimus changes Android's internal memory settings, causing the operating system to free up memory more aggressively, thereby increasing system performance and battery life.
Optimus can now start a background service that seeds Android's entropy pool, significantly reducing lag. When Android's entropy pool becomes depleted, lag is experienced. This service keeps the entropy pool full, therefore reducing lag.
Keywords: optimus memory optimize optimizer root rooted speed fast autokiller task manager optimus memory optimize optimizer root rooted speed fast autokiller task manager optimus memory optimize optimizer root rooted speed fast autokiller task manager soapbox entropy pool lag seed seeder rngd entropy pool lag seed seeder rngd entropy pool lag seed seeder rngd
EveryBIOS is now free! Download it and you get full version!!
Do you need some BIOS for development? Or for emulators? You don't know where or how to download them?
Well this APP is for you!! It have zipped and unzipped files!!!
This app include BIOS for:
Nes to Snes adapter
And more!!!! Just with one click you will be downloading the BIOS!
Its the perfect app for those who like Ubuntu and/or like to try new and unique apps.
It include features like:
All notifications can be shown, just enable the Accessibility Service and set it up.
Password security (More unique security types to come)
Easy to use music buttons
14 different languages.
Well this app is for you.
This app shows G-Force peaks for + and - in all directions, Z axis, X axis, Y axis and all together. It have options to:
-Calibrate your device 0 point (you can have your device everywhere you want!)
-Real time graphs
-Flash screen when given G-Force
-Save text file with G-Force numbers
-Graph file saved
-Scope graph (Currently beta)
You can use it in every direction just calibrate your device and it will start calculating. Easy to use!!
****How to use****
Just open the app, put your device in a steady place, click on calibrate and now start driving!
With this File Manager you can do everything you want to your folders. It includes:
Multiple file manipulator
Create new file/folder
and much more!
You can select from 2 themes (free users) and 6 themes (pro users)!!! With just a click of a button!
Also it includes a new and unique feature called Manipulator (pro users). This feature let you modify multiple file names (2+). With every name you want! Also it include a preview button, so you can see how it will look before messing everything up!
Add files and folder widget to your home screen. Pro users can change widget icon.
App information available.
2 Screens available. Each one have a separate file path so you can copy/past things easly. Just move your screen to one of the sides starting from where the favorits ends or click the buttons at the top part of your screen.
Encrypt and decrypt your text files (Pro)
Future updates will include:
Zip file viewer
You need the client windows software in order to use this app, IT IS ONLY COMPATIBLE WITH WINDOWS. Download Windows program here: http://www.mediafire.com/folder/bq621k1bkzekb/Windows
Have you ever wanted to know how hot your CPU and/or GPU run while gaming? What about HDD and/or SSD temperature? Clocks? Load?
Then this app is for you!
This app will let you see in real time your computer sensors information. It will give you information like:
It also includes an option to data log your sensors data. This option will create a .xls file in the root of your sdcard with all the data your computer sends to your Android device!
Find and replace
Get file names
Merge text line by line
Add prefix and/or suffix
Random number generator
Remove empty lines
Is as easy as just select what action you want to perform, add the text you want to modify, add what to modify and press the go button. Within a few seconds you will get your new modified text!!
Well this is the app you need!!
What it does?
When you answer a call, or make a call, a semi transparent screen will appear preventing you from doing things that you didn't want to, but if the person who you are talking with ends the call the screen will disappear. You can close the screen if you want.
If you get a error while applying the theme, apply system theme, reboot, apply my theme, reboot and enjoy!!!
Dark Cyan Blue (DCB) theme is under development, this means that it will receive a lot of updates when I themed more apps.
Google Play (Full)
Paranoid Settings (Full)
Play Music (Full)
Questions? Requests? Want to know more about the theme? Visit: