CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced.
CPU Booster successfully controls the supply voltage according to its temperature and :
1. Increases the CPU’s productivity!
2. Extends the CPU’s life!
This app will not damage your phone’s, tablet or any other Android device’s hardware!
- This application only works on devices which have Gear Fit Manager.
How to use:
- Install Gear Fit Manager and connect with your Gear Fit device.
- Download and install this Gear Fit Navigation app.
- In the app, tap settings to set screen orientation.
- Start the app from app connect menu on your smartwatch and choose ringer volume.
- Exit the app with the Gear Fit Home/Power button.
Features( Totally Free and No Ads ):
✓Real-time temperature monitoring
Monitors and logs phone temperature in real time, and displays temperature change curves.
✓Dynamic overheating app detection
Analyzes CPU usage dynamically, and detects apps that are overusing CPU to determine the cause for phone overheating.
✓One tap to cool down
Allow you to close overheating apps with one simple tap to reduce CPU usage and cool down your phone.
Closes apps that are likely to cause overheating, and prevents the phone temperature from rising.
★Why does my phone overheat?
Constantly high CPU usage is mostly the reason why your phone overheats. Some apps tend to use the CPU for a very long time in the background, which causes your phone , especially android phones to produce excessive heat.
★How dose Cooler Master work?
Cooler Master is designed to monitor the CPU usage of your phone, and detect apps with high CPU usage so you can close them
★Why does my phone get so hot?
It’s normal for your phone to get hot when you are using complicated apps, watching video clips, or while you recharge it. In such cases, just put your phone somewhere cool and ventilated, and the temperature should drop soon.
English, Simplified Chinese, Traditional Chinese, Spanish,Portuguese Brazil.
The features listed above are available for free. There are no in-app ads.
Please contact us at firstname.lastname@example.org if you have any questions or suggestions.
This app requires ROOT permissions.
If you don't know what root permissions are, you probably don't need this app.
No-frills CPU Control is a tool you can use on your rooted  device to quickly set the CPU frequencies and governor to use.
It allows you to use the highest frequency your phone supports and gain some precious FPS in your preferred game, or go down to the lowest frequency and gain some more juice when your phone is sitting idle.
All of this without any memory footprint or services running in the background!
It has been reported working on a large number of rooted  devices from HTC, Samsung, Motorola, LG, Huawei, ZTE, Oppo and so on! Even Kindle and Nook Color!
Unfortunately, it does NOT work on Flytouch tablets, Zenithink zt180, HaiPad M7/Tabtech M7 or fake HTC/Samsung clones. Sorry about that, but you knew what you were buying when you did... didn't you?
Is your device supported? You need ROOT permissions and you'll probably need to be running a CUSTOM ROM (an example is the famous CyanogenMod) with kernel frequency scaling enabled. If you are unsure... just install the app and see for yourself!
If you need a custom ROM for your phone, the best places to find one are XDA [http://forum.xda-developers.com], MoDaCo [http://android.modaco.com/] or similar forums.
Be wary of the frequencies you select! Your phone may lock or become unresponsive if it doesn't like extreme values, but -hey- better safe than sorry: even though No-frills CPU Control allows you to choose if you want to apply the settings on boot, it comes with an extra "safety valve" too! If the device doesn't shut down (or reboot) in a clean way, it will not apply the settings, avoiding those nasty boot-loops you may have had with other overclocking apps. Please keep in mind that apps like QuickBoot are as quick as they are unsafe…
- Easy GUI to set frequencies, governor and i/o scheduler
- "safety valve" to avoid boot-loops in case of unsafe settings (more info in the homepage)
- Stats screen to see the effective usage of frequencies
No-frills CPU Control is open source under Apache 2.0 license. You can find the source code, more informations and you can ask for questions on its project post directly on XDA: http://forum.xda-developers.com/showthread.php?t=911917
SUPPORT: If you have any problems, before you write a negative comment, write an email or go to the homepage to get answers.
If I don't reply you or solve your problem, then go ahead and post a negative comment.
HINT: If you can't find the email of the developer, use the "Send CPU data" feature from the main screen, instead, and add your questions.
This app is FREE and will always be FREE.
Translations are ALWAYS welcome and are now as easy as getting a (free) account to http://www.getlocalization.com/noFrillsCPU/ and correcting what's wrong or filling what's missing. A HUGE "THANK YOU!" to all the people who helped translating this app! (jdb78, kallt_kaffe, David Kejzlar, Ryunosuke Tanaka, Charlie Cheung, dxdiag32, Corentin Garcia, Carlos Camacho, dancer_69, TorbenKB, Chris, FollowWings, Spaar, prescott66, Marco Bizarro, Cristian Silaghi, Cenk H. Uzunboy)
Starting with version 1.21 the app has a new look & feel matching the new Android 4.0 Ice Cream Sandwich and has dropped support for older Android releases (1.6 and 2.0). Don't worry! There's a new app, No-frills CPU Control CLASSIC which will always have the same features as the classic app with the old look & feel!
: if you don't know what a ROOTED device is, you can find a pretty good explanation here: [http://www.androidauthority.com/rooting-for-dummies-a-beginners-guide-to-root-your-android-phone-or-tablet-10915/]
Its prime purpose is to be a battery saver and to save as much battery as possible, but it can be used to overclock at the same time (if the kernel of your device supports it).
Depending on triggers (based on the battery) different profiles are loaded. Each trigger has different profiles depending of the the state of your phone (if it is locked, on battery, on power or a phone call is being done).
A profile can modify the following:
* The CPU governor, its thresholds and min/max frequencies off your CPU (i.e. setCPU speed).
* The state of services like:
- mobiledata connection
- 3G/2G switch
- background sync
- airplane mode
Configurations (i.e. a set of trigger and profiles) can be loaded based on the time of the day and the day of the week. This allows you to set a different behaviour during the night or the weekend.
In praise of CyanogenMod... ;)
If you use and like this app please subscribe to the mailing list email@example.com and participate in the forums on https://sourceforge.net/projects/cputuner/ (Project webpage).
You can follow CPU tuner on: https://plus.google.com/109797451979104819882
If you want to help translating please join in at http://www.getlocalization.com/cputuner/.
Please report errors in a mail to the address listed below not in a market comment.
You best generate a capabilities report first, by going to settings then to backend and choose capabilities report, when it is done hit send (and save the mail as draft). Then describe your issue (and if possible attach a logcat output along with the zip file from the report).
A note on permissions: Yes there are a lot and potentially dangerous permissions needed, but cpu tuner does not request the network communication permission which means that cpu tuner cannot send any information back. Further more cpu tuner is opensource so you can browse the code and check....
AnTuTu CPU Master is a tool for changing the CPU/GPU speed on a rooted Android Mobile Phone/Pad.
CPU Master Automatic detection CPU's available frequencys, don't need to manually choose.
CPU Master's OverclockWidget show the CPU and battery stats, and change the CPU speed faster and simple.
CPU Master feature:
+ Speed up your processor
+ Powersave battery (speed down)
- SoC (System On Chip) name, architecture, clock speed for each core ;
- System information : device brand & model, screen resolution, RAM, storage.;
- Battery information : level, status, temperature, capacity ;
- Android 2.2 and above (version 1.03 and +)
- INTERNET permission is required for the online validation (see notes below for more détails about the validation process)
Online Validation (version 1.04 and +)
The validation allows to store the hardware specification of your Android device in a database. After the validation, the program opens your validation URL into your current internet browser. If you enter your e-mail address (optional), an e-mail with your validation link will be sent to you as a reminder.
Settings screen and debug (version 1.03 and +)
If CPU-Z closes abnormally (in case of bug), the settings screen will appear at the next run. You can use that screen to remove the main detection features of the application, and make it run.
In case of bug, please open the application menu and choose "Send Debug Infos" to send a report by email
FAQ and troubleshooting
You can visit the FAQ at that address : http://www.cpuid.com/softwares/cpu-z-android.html#faq
DEVELOPEMENT STOPPED on 02-2014 for health issues :(
APP SOURCES ON SALE! --- APP SOURCES ON SALE!
APP ACQUIRED BY ASSEMBLER-COMPUTER GROUP ITALY
This app can detect hardware of 2010-early2014 devices, it's a nice tool to identify a clone.
1、increased cpu temp overlay
2、add start overlay on boot
3、update the user interface
4、use the new icon
5、strengthen the sharing function
Cpu Temp v1.0
1、This app can get the cpu temperature(not the battery temperature)
2、This app can get the cpu usage.
3、It can get cpu frequency
4、It can get the battery info
5、It can monitor the cpu temperature,usage and frequency change
6、It can get cpu info
7、cpu temperature pressure test
*Getting the exact cpu temperature depends on the linux kernal,otherwise it will show you the temperature by algorithm
3C CPU Manager requires a rooted device to offer a simple yet powerful interface to control your CPU and GPU configurations.
You can remove ads and unlock all features using in-app purchase inside 3C CPU Manager.
Control single, dual, quad, hexa and octa-core CPU settings.
- Set frequencies, governor and voltages *
- Configure thermal and mp-decision deamons
- Set SD read cache size to boost read performance
- Set IO scheduler to optimize multi-task
- Set fsync to improve write performance*
- View frequency usage table
- Control cores separately*
Set screen on or off configurations of all above settings.
Control GPU configuration *
- Set max frequency, governor and votlages *
- View frequency usage table
* Support depends on kernel
Find out what is slowing down your Android device!
Unlike other tools, CPU Monitor Advanced Lite is an expert technical app which records historical information about processes running on your device. You can configure the length of the information capture. You can store and review up to 100 captures.
CPU Monitor Advanced Lite will even automatically begin recording information when an application exceed the set thresholds for CPU over a specified time interval.
You can use the information stored over time to identify trends in application behavior and to identify processes that utilize too many resources over a period of time.
CPU Monitor Advanced Edition is capable of manual and automatic captures or snapshots. The app can automatically start a snapshot capture of what processes are running and what amount of resources they are consuming.
The app also allows you to graph each process captured in the snapshot and you can graph the CPU, the memory and the battery drain.
The app also allows you to kill the process as well as O/S processes if your phone is rooted, otherwise it will kill only user processes.
The app only uses about 4% of the phone's CPU to run in background monitoring mode and about 8% when capturing data.
CPU Monitor Advanced Lite will help you identify processes which slow down your phone over time.
There are many apps that save battery or increase performance, however Root Booster uses the most proven settings to achive the best results. You can easily apply these settings with preset modes which ensure speed boost, battery boost or stability boost. These modes are achieved by applying appropriate settings to the main phone components. Here are some explanations for what particullary Root Booster does to your CPU, RAM and Android OS system.
Hibernation (Android OS optimizer)
Each Android application can have one or multiple services. They run in the background and usually perform some kind of task. Many people think that when they kill an application, it completely stops draining your battery and computing power, but that's not true. Application still have servicies that are running after killing and still drains battery and comuting power. On the other hand, if you hibernate an application it stop it\'s servicies and application does not drain battery and CPU computing power anymore. Hibernation is gently and efficient way to save your battery and increase performance.
Root Booster will find battery draining and performance demanding applications and auto hibernates them.
CPU (processor governor control)
A governor is a driver for the regulation of CPU frequency. Governor decides how fast and when will be achieved maximal or minimal CPU frequency. Setting apropriate governor makes your device more battery saving, fast or even more stable. However, deciding which governor is suitable is a little bit tricky.
Root Booster can decide which governor you should use and automatically applies the most suitable governor for the selected mode.
RAM (memory manager)
Each application uses VM heap for it 's data and work. The main reason to change the VM heap size is stability improvement. Many big applications need a big amount of memory (VM heap) for their work. If the VM heap size is smaller than the requested memory, it causes an application crash (Out of memory error). Setting heap size is hard task and there is no manual to set up for better performance. Better performance can be only achieved by testing.
Root boster will test your RAM and sets up your VM heap size for better stability and performance.
Note: Root Booster is designed to work only with rooted devices
- ANSWER incoming call (which Gear Fit doesn't support by default. Note : Please open Gear Fit Manager, navigate to Notifications then uncheck Incoming call.)
- Turn on / off speaker while calling
- View the call logs
- Browse favorite contacts
- Browse contacts (Contact name only supports for latin characters)
- Make phone call from call logs, favorites & contact.
It's useful when you are using wire or wireless headphone and you don't want to pull the mobile phone out of pocket to make phone call.
▶ How to use
- Install Gear Fit Manager and connect with your Gear Fit device.
- Download and install the Gear Fit Phone application.
- You can find the Phone app on App Connect of your Gear Fit.
- Tap Phone to launch.
▶ How to use
** Make sure Gear Fit Manager is installed and Gear Fit is connected.
- Download and install the Gear Fit Calculator application.
- You can find the Calculator app on App Connect of your Gear Fit.
- Tap Calculator to launch.
- Toggle Wi-Fi, Sound mode, Mobile Data, Sync, Wi-Fi Hotspot
- Toggle Flashlight (maybe this function doesn't work on some devices)
- Display PHONE battery level
▶ How to use
- Install Gear Fit Manager and connect with your Gear Fit device.
- Download and install the Gear Fit Quick Settings application.
- Navigate to App Connect on your Gear Fit, tap Quick Settings to launch.
- Touch icon to toggle each setting mode.
For Android versions since Lollipop it only works if the device is rooted.
This app is usable for free, but if is the case, it includes a 5 seconds delay before process the requests.
Also, it Includes settings to automatically disconnect mobile data when screen becomes off and to reenable when the screen is turned on, and also a convenient shortcut in the statusbar.
* Hidden numbers
* Phone numbers (match start of the number, end of the number or complete number)
* All numbers from a contact
You can enter the blocked numbers manually, from the contacts list or from the calls log.
The app support several working modes:
* Accept all incoming calls
* Reject all incoming calls
* Block the numbers/contacts that are added to the list (blacklist)
* Accept only incoming calls from the numbers/contacts that are added to the list (whitelist)
Note that the app is started when the call is received. Due to that, is possible that the system starts the incoming call ringtone before the app ends it. If that occurs, please, create a ringtone with 1-2 seconds of silence and use it.
Also, the app can show the list of rejected calls and much more...
Consider buy PRO version (provided via a InApp buy), that unlocks the ability to add more than 3 numbers/contacts to the list and removes Ads.
Help with translations: https://www.getlocalization.com/CallsBlocker/
For example, you can configure it to not synchronize your work account when you are in your house (a simple rule based on a cell phone anthenna or wifi network name) or, to only synchronize one of two devices if two devices are close (a rule based on the bluetooth), they share, thus avoiding the double notifications.
The application allows you to define rules based on the proximity of a bluetooth device, a wireless network, a cell phone anthenna or the level of battery charge.
It also allows to define multiple profiles and rules (based on conditions).
If you purchase the paid version (from within the application), you can remove the advertising and backing up their profiles, rules and conditions that may then restore on other devices.
Please, if the application does not work properly, email me. So help me improve the application.
Add-On to disable notifications per apps in profile
In order to disable notifications for apps in profiles you need Android 4.1.x (or higher) and a custom ROM based in AOSP and to install a add-on available in XDA thread (you need to install this add-on in system partition in order to use it).
Explanation of permissions used by the application:
Access accounts: For information on the accounts configured on the device.
Read / write configuration and read / write synchronization status: To change the sync preferences (objective of this application).
Bluetooth: Get status of Bluetooth devices nearby.
Wifi: Get status of wifi and nearby devices.
Access To network positioning: To get the ID of the cell phone that is connected to the device.
Billing: To allow in-app billing
Internet: To show ads, that helps fo pay my time (sorry!)
In App billing allows users to:
With the ADB WiFi tool by XDA Recognized Developer bartito, you can put the cables to rest. ADB WiFi is an application that allows your device to be connected to your computer through your home WiFI connection. It works with every operating system that can be configured with ADB, as long as you own a rooted Android device. It’s especially useful on Lollipop ROMs that often lack the built-in WiFi ADB functionality often found on various Jelly Bean and KitKat custom ROMs. The application was released way back in 2012, but it was recently given a complete rewrite to provide the Material Design experience.
Rid yourself of unnecessary cables and make your desk free from clutter.
Instructions (I assume you have ADB installed in the PC):
- Execute this application in your android device
- Click the bug image until it becomes green (you provably need to provide superuser permissions)
- Open a terminal or command session in your PC
- execute "adb connect XX.XX.XX.XX" in the PC (the connect address is provided by my application
- execute "adb shell" in the PC (or any ADB command)
** Remember to activate USB debugging in device settings **
** THIS APP REQUIRES SUPERUSER PERMISSIONS **
If your device is rooted the scripts can be executed using superuser permissions, but normal users can do also.
Note that some actions (like update the cpu max/min speed and others) requires root permissions. Don't blame to me if you execute in a not rooted device at don't works!
Pro version removes Ads.
For each app, you can configure the ringtone, vibration, led color, number of repeats and interval of each notification.
Notifications are automatically cancelled if the monitored app removes the notification.
Also, for each monitorized app you can configure if you like to be notified when a ongoing or clearable notification was created or if the created notification contains a specific text (Jelly Bean or greater).
This app requires a special permission that needs to be activated after the install (go app settings in order to activate it).
This app is compatibile with Pebble Watch.
Please, contact if you have troubles or questions.
In App Billins allows users to
Allows to monitorize more than one app
About english translation: English translation has been created using Google Translate. Don't blame for the translation errors, only for the app errors!
REMEMBER TO REBOOT THE PHONE AFTER APPLY PHOTOS
USING ROOT MODE
This was normal in the firsts Android versions.
The new phones includes a large amount of memory and a large screens, and also, the new Android version (Ice Cream Sandwitch) predisposes to a better user experience.
But, by default, the contact photos stored in Android 4.0 uses the older resolution (96x96px), and the photo contacts appears pixelated.
With this app you can make a bulk update of your contact photos to a increased resolution (256x256px) that's shows much better in your new devices.
Also, in older devices, that aren't running ICS, the app allows to make a bulk photo contacts update and increase the resolution to the device max supported size.
Finally, if you have rooted your device, you can increase the size of the contact photos to 400x400px (or more). That sounds good in devices with a large screen, like Galaxy Note.
1) Place the desired contact photos (in PNG or JPG format) in a folder of your sdcard. I recommend to use square photos.
2) Open the app
3) Click settings and configure the sources folder to the stored photos folder
4) Go main window in the app
5) Select the photos that you want to update
6) Click the update photos button (the photos was automatically resized to the max resolution supported by the device).
* If you want to use photos greater than the maximum supported device size, you need to be rooted. If you're rooted, go
settings, check the "Use HD photos" checkbox then apply the desired photos.
Please, if you have troubles or issues, contact with the developers via email or at the XDA thread.
Or are you boring when the apps store starts to download all the apps after a wipe?
With this application, that needs root privileges, you can automate backing up your applications code (which will be updated whenever they are installed or updated) or data.
For this you must just specify the directory in which to store the backup application and allow root privileges when they are required.
Furthermore, the application will store a history with the changes which have taken application.
Please note that the application needs root permissions.
In App billing allow users
Use the app after trial period expiration (trial period is set to 7 days)
This app attempts to minimize the battery consumption, and does so in a very simple way: turning off the wifi, which translates into a real battery saver.
So, when it detects that the device has been disconnected from a wireless network, and after waiting a reasonable time (configurable), the hardware wifi going to off.
In order to set wifi state the app monitorizes the cell tower in which your device is connected and classifies it statistically the possibility of establishing a wifi connection, enabling or disabling the wifi attending to this possibility.
The application also allows you to add notifications in the status bar, view the history of connections (PRO version), auto disable while airplane mode active, etc.
In the real life if you are not near to the phone when a reminder becomes active, you will forgot it and their consequences can be unpredictable.
This app provides recurring reminders for the calendar events and fully solves the issue.
HOW IT WORKS
When a calendar reminder is triggered by the system a message is sent. This app captures the message and starts their work...
With this app you can configure the sound, vibration type and their pattern, led color, repeat interval and much more for the alerts in your Google calendars.
Also you can configure how a reminder stops: when manually stops, when the event starts or when the event ends.
Regular users can configure global settings, that are active for all the calendars, but PRO users can configure these options locally for each calendar.
PRO users can access to future exclusive functions and has prioriatry technical support. Also PRO users can't view Ads.
You will need to set the sounds for each calendar, or a single overall sound for all calendars. You also need to disable notifications in your calendar application.
The PRO version allows many extra features such as the ability to configure each calendar separately, the ability to define don't disturb periods (during which not notified) [eg to don't receive events from your work calendar during the weekends], can set up to 4 shortcuts to easily delay alarms and locks the Ads.
Don't forget to contact if you have issues!
Help with the translation to your language: https://www.getlocalization.com/CalendarNotifier
This application is compatible with Gmail for Android (versions for Ice Cream Sandwitch and higher).
APP IS WORKING FINE, YOU ONLY NEED TO CONFIGURE IT AND SWYPE THE TOP-RIGHT SWITCH TO "ON" MANUALLY IN ORDER TO ENABLE THE APP
I will implements recurrent notifications for unread messages (in inbox or prioritary inbox) in all your accounts separatelly (only one account in the free version).
Due the limitations of the Gmail API, that exports the total unread messages count, nor the messages, the notifier can't detect new messages in certain scenarios (by example if one new message is received but already a unread message is in the conversation).
This app is compatible with Pebble watch (go settings to configure it)
Comments are welcome!
For use it, you need to disable ringtone notifications (setting notification sound to silent) in Gmail (prioritary or normal inbox depending of your choice), but not notifications (i like Gmail notifications and I don't have included in my app), the go this app and configure repeats, sound and vibration and then enable the service in the top-right of the screen.
In App billing allows users to
Allows to monitorize more than one account
With a design based in Material and inspired in the contact app included in Lollipop, this app allows you to make backups (manual or automatically) from the calls log and from the database of messages (sms).
You can then delete the calls and messages, reloaded into the system log, etc.
As for calls and received messages, if you activate the option, the backup will be performed as soon as the corresponding event occurs.
In contrast, due to the limitations of Android, the backup of outgoing messages is held every few hours, in a background process.
Furthermore, the application will show the call log or messages with a comfortable and intuitive interface and can answer calls or messages received from the application itself.
Of course, you can delete entries or log messages.
For the missed calls (if you enable the automatic backup of calls) the app informs of the ringing time!
The paid version removes the Ads and allows you to create a backup in the sdcard of the app data.
Please, don't forget to contact if you have issues...
Note that Android versions since KitKat (4.4) defines a messenger manager that is the only that can write the messages database system. We implement it only to have the ability to write this database. This means that the app appears in the list of applications that can be selected as default messaging application. Please do not select our app to that effect, as not incorporate management for incoming messages and stop receiving SMS, MMS and any other message that depend on this service.
Help with translation: https://www.getlocalization.com/TelephonyDataBackup
and I do not like to leave it charging overnight.
So I finally decided to develop a small utility that notifies every X minutes when the battery is charged, in order to remove the charger.
Also, I added a feature to notify when the battery charge is low.
You can set the notification ringtone, interval between notifications, number of notifications, charger type...
I hope you find it useful.
Please, post errors and get additional information at the official XDA thread: http://forum.xda-developers.com/showthread.php?p=20375918 or via email
Note that the Interstitial Ads that are shown when you leave the app are shown only the first 6 times that you exec the app. After that, no more Interstitial Ads.
PRO features: Remove Ads
Simply select the app that you like to share and click the menu button to see the options.
You can configure to display system and user apps or only user apps, and also includes a useful search tool.
*** This app requires root permissions ***
When you select a app (or a group of apps) we will list all apps that can be used to share them. You only need to select one (note that some apps limits the size of the shared items, like the email app from G, that can limits the individual attachments size to 20Mb)
With this application you can create your own maps and markers, which can be grouped into categories and even share with others.
Create and share your own maps, categories and markers.
You can also use the search engine to move the map quickly to a specific location or click in a marker to see the marker options...
HOW ADD A MARKER
Make a long press on the map to create a new marker
HOW VIEW MARKER DATA OR NAVIGATE TO A MARKER
Click on marker to see the associated information and to receive instructions to how reach to it.
HOW TO VIEW ALL MARKERS IN A CATEGORY
To manage categories, and also to list all markers in a category, open right drawer then click in the category dropdown.
HOW SHARE A MAP
To share a map, and also to view the markers in a map, open left drawer then click in the map dropdown.
Can't be more easy!
Access location: Needed to perform the main task of the app, that's the geolocalization
Internet: To display maps (and Ads in the free version)
Billing and get-accounts: To manage Premium InApp
Write external storage: To perform backups
Help translating to your language at: https://www.getlocalization.com/MyMarkers/
The amazing of this application is that you can configure the sound, repeat interval, repeats count, vibration and led color.
Also, you can set the instant of the remind ends (via a max number of repeats or when no more missed calls or unread messages).