- Easy-to-use ON/OFF on-screen button for maximum ease of use
- Fun power up/power down sound effects (with mute button toggle)
- Auto-on light mode when LED flashlight app launched on your phone
- Fastest launch
- Clean and realistic high-tech design resembles your phone model
- Button outline color changes when light is on
- Straight forward LED flashlight/torch/light... no frills or unnecessary effects
- Use for the brightest, most reliable light to find your way
5 STAR: “Extra light Great for when I want to check on my sleeping son so I don't have to turn the ceiling light on” – K. Latourette
5 STAR: “Let There Be Light! Best flashlight app I've ever had.” – B. Keena
5 STAR: “Handy and awesome! Simple and do the job with no fuss. Great app.” – P. Delech
5 STAR: “Awesome App!! Works great!! Turns on and off so quick and easy just by pressing a big button in the middle.” – DJ Ludington
Although this LED flashlight was specifically created for the Samsung Galaxy S4, it has also been tested to work well on the following devices (so far):
- Samsung Galaxy S4 LED flashlight app, single color light
- Samsung Galaxy S4 Active LED flashlight app, single color light
- Samsung Galaxy S4 Mini LED flashlight app, single color light
- Samsung Galaxy S3/S III LED flashlight app, single color light
- Samsung Galaxy S3/S III Mini LED
- Samsung Galaxy Express LED
- Samsung Galaxy Grand LED
- Samsung Galaxy Mega LED
- Samsung Galaxy Nexus LED
- Samsung Galaxy Note LED
- Samsung Galaxy Note II LED
- LG Nexus 4 LED
- LG Optimus L9 LED
- HTC One LED
- HTC Evo 3D LED
- It might just work on yours too... give it a try!
- Camera / Flashlight: LED access - some phones require camera permission
- Internet / Access network state: Ads
app icon name: GS4Light
Better know your phone by -
1. check the phone's detail hardware information;
2. run performance test and compare with other phones in the world.
This is a tool for Samsung Galaxy S3/4/5 & Note 2/3/4 users to check if their phone isn't a cheap fake clone. It highlights device information that does not match Samsung Galaxy S3/S4/S5/Note 2/Note 3/Note 4 and helps users to tell if their phone is genuine.
Example of FAKE GALAXY S4 -
cpuName: ARMv7 Processor rev 2 (v7l)
screenResolution: 1280 * 720
Support list of Galaxy S4 variants:
GT-I9500， GT-I9502, GT-I9505, GT-I9506, GT-I9508, SCH-I959, SGH-I337, SPH-L720, SHV-E300S,
SGH-M919, SHV-E300L/S/K, SCH-I545, SGH-M919, SCH-R970, SC-04E, SGH-I537, GT-SC04E,
Galaxy S4 Mini, Galaxy S4 Active
Support list of Galaxy S3 variants:
GT-I9300, GT-I9300T, SCH-I939, SGH-I748, SHV-E200K, SHV-E200S,
SHW-M440S, SHV-E210K, SHV-E210L, SHV-E210S, GT-I9303T, SC-06D, SCH-I535, SCH-R530,
SGH-I747, SGH-I747M, SGH-T999, SGH-T999V, SPH-L710, SCH-I747, GT-I9308
Support list of Galaxy Note 2 variants:
GT-N7100, GT-N7102, GT-N7105, GT-N7108, SCH-I605, SCH-R950, SGH-I317,
SGH-I317M, SGH-T889, SGH-T889V, SPH-L900, SCH-N719, SGH-N025, SC-02E, SHV-E250K, SHV-E250L, SHV-E250S
Offical website of this app: http://xihuanat.com/galaxy
WARNING: For most recent phones/firmwares it REQUIRES ROOT.
Tested on S4 I9505 (Root mode) and it is working!
WARNING: Changing CSC WILL WIPE your rom, so backup your data!!!!!
Warning!!! Root is required on most of the jellybean roms for Galaxy S2/S3, Note/Note2 and maybe more.
If you receive the message:PreconfigUI does not support SingleCSC - this means that your rom does not support CSC Changes.
I cant add CSC-s to your rom, so please dont ask.
FOR: Samsung Galaxy S GT-I9000 and Samsung Galaxy S 2 GT-I9100, and Galaxy S3 GT-I9300
It may work on Vibrant and Captivate but its not tested.
THIS TOOL WORKS ONLY ON STOCK SAMSUNG ROMS! NO CUSTOM ROM SUPPORT
WARNING: Changing CSC will wipe your phone. Please backup any information!
Please send your feedback in ENGLISH. Thank you! :)
This tool will help you change your CSC (Customer Sales Code) on your Samsung Galaxy S / S2.
This tool will not work on any other phone (Like older galaxy, HTC, Motorola, etc...)
This will only work if your current rom is MultiCSC
This is a simple app for measuring temperature, humidity and pressure.
The unit for the temperature can be changed between Celsius, Fahrenheit and Kelvin.
The unit for the pressure can be changed between Hectopascal and Torr.
Furthermore, the accuracy can be adjusted.
With temperature fluctuations should give the sensors a few minutes to be settling around.
And the most important:
- No unnecessary permissions required
- No advertising
** models like Galaxy S3-S5 or Galaxy Note2-Note4 are missing temperature and humidity sensor, not my fault, sorry, the device manufacturer has decided to remove these sensors **
** if a sensor is set as "NOT PRESENT" is because your phone doesn't have it **
- Ambient temperature in degrees celsius
- Percentage of moisture in the air
- Light intensity
- Air pressure
- Height above sea level
- widget with ambient temperature! more coming soon
** The data is read directly from the sensors could then have an error of up to 5-10% (in the worst case) that does not depend on me, but by the sensors, unfortunately I can not do anything about it, to try to reduce the errors Please keep the device on a flat surface for a few seconds, so that the values are optimized, if your hands touch the device, the temperature will be too high of some degree **
If you want to report the full compatibility of your device with the application please leave feedback or send me an email, so it will be added to the list, any feedback and comments are very much appreciated, the application aims to be simple and instant, to have at hand all the data from the main sensors of the phone, if there are suggestions, recommendations and requests for additions will be happy to provide (where possible)
1.1 added Google Analytics
1.2 added translation in:
1.2.1 fixed an orientation bug
1.3 added icons
1.3.1 bug fix
1.3.2 finally aviable first widget
1.3.3 added share functionality, fixed a bug with translation
1.3.4 fixed russian, widget 2x1
1.3.5 added imperial system ON/OFF menu option
1.3.6 fixed some translation, added version number, added option to change font
1.3.7 added inHg to imperial system
1.4 fixed widget, added notification, new accuracy (0s: Low -15s: Medium -45s: High)
1.4.1 fixed layout
1.4.2 fixed layout for medium font size
1.4.3 fixed a problem with font switch
1.4.4 battery usage should be 1/4 now
1.4.5 added greek and hungarian
1.4.6 added dutch
1.4.7 added settings menu, added notification kind
1.4.8 added fist start notification
1.4.9 divided option to have imperial system for temp/altitude/pressure
1.5 fixed translations, now you can select background color, now you can set text dimension and report translation error via mail from inside the app =)
1.5.1 some fixes, added material ActionBar/theme
1.5.2 fixed translations in ru/de, added text color option
1.5.3 added option to set pressure at nearest sea level, various fixes
1.5.4 bug fixes
1.5.5 bug fixes
Smart Remote control for electronic devices with your SAMSUNG Galaxy S4, S5, Note3, Galaxy Tab / HTC ONE Smart phone with IR(Infra Red) Remote.
Please check supported SAMSUNG GALAXY/HTC smart phone list below!!!
You can use your smart phone as IR Smart Remote Control for
A lot of remote controls are already exist in built-in app (Watch On/HTC TV)
But ASmart Remote supports more devices(DSLR, Projector, Air-conditioner) and is so simple !!!
And we are updating remote controls everyday!!!
ASmart Remote supports most brands and models and all functions are verified.
You don't need buy universal remote control any more.
Just download ASmart IR Remote and you can remote control any electronic devices.
ASmart Remote is FREE!!!
### IR remote control works only with Android device IR built in
### Supported Android Devices :
SAMSUNG GALAXY S4
SAMSUNG GALAXY S5
SAMSUNG GALAXY NOTE3
SAMSUNG GALAXY MEGA
SAMSUNG GALAXY ZOOM
SAMSUNG GALAXY S4 MINI (With IR)
Other SAMSUNG smart phone, tablet with IR
HTC ONE M7
HTC ONE M8
HTC ONE MAX
Other HTC smart phone with IR
Smart Switch gives you the freedom to move your contacts, music, photos, calendar, text messages, device settings and more to your new Galaxy device. Plus, Smart Switch™ helps you find your favorite apps or suggest similar ones on Google Play™.
Who can transfer?
• Android™ owners - using wireless device-to-device transfer
• iOS™ owners - use the option that’s best for you:
o Wired transfer from your iOS device to your Galaxy
o Import from iCloud™
o PC/Mac transfer using iTunes™
What can be transferred?
Contacts, calendar, text messages, photos, music (DRM free content only, Not supported for iCloud), videos (DRM free content only), call logs, memos, alarms, Wi-Fi settings, wallpapers (Android only)
Note: Smart Switch scans and transfers content stored on the device and from the SD card (if used).
What is needed to transfer?
• Android transfer:
o Between Galaxy devices with Android 4.0 or higher (Wi-Fi Direct)
o From Android device to Galaxy device with Android 4.0 or higher (Mobile AP)
• iOS transfer:
o Wired transfer: iOS 5.0 or above, iOS device cable (lightning or 30 pin), USB On-the-Go (OTG) cable (What is a USB OTG cable?
o iCloud transfer: iOS 4.2.1 or higher and Apple ID
o iTunes transfer: Smart Switch PC/Mac software – Get started http://www.samsung.com/smartswitch
Note: For more information, and step by step directions go to http://www.samsung.com/smartswitch
What devices are supported?
Galaxy: Recent All Galaxy Mobile/Tablet Device (From Galaxy S2)
Note: For Galaxy S2, old OS (GB/ICS) version can cause incompatibility. If your S2 does not work properly, please try after firmware update.
• HTC®: One X, X+, S, SV, V, Butterfly, Desire X, 500, EVO 4G
• LG®: Optimus G, L9, 4X HD, L5, L7, Nexus 4 E960, G2, G3
• Sony®: XPERIA Z, Z1, TL, V, ZR, Acro HD, Go, E dual, E
• Huawei™: C8813, T8951, ASCEND G52
• Lenovo ™: A798T, A789, S720
• Motorola®: DROID RAZR, RAZR Mini, RAZR Maxx, ATRIX III
Flashlight - Galaxy S4 S3 Note3 uses built in LED Flashlight Free.
It doesn't get brighter then this!!
Flash light will work with following phones
Samsung Galaxy S4
Samsung Galaxy Note 3
Samsung Galaxy S3
Samsung Galaxy S2
Samsung Galaxy S
Samsung Galaxy Note
Samsung Galaxy Note2
Samsung Fascinate Flash Light
Works on Samsung Fascinate.
Motorola Droid x2(thank you user!)
NO GPS Tracking!!
LED Flash Light.
It uses camera LED to use as flash light.
Automatically turns on as you open the app and closes when exit to save battery.
1. Screen time out disabled.
Flashlight, Flashlight App, Flash light, Flashlights, Galaxy S3, Galaxy S4, HTC One, Note3, Note 3, Note2, Note 2
The 2 buttons will be disabled if the kernel does not support this function
This app does not work on devices other then the S4!
At first start it's recommended to fix the permissions of the cmd file first (root required). After that Glove Mode can be enabled and disabled by using the buttons (no root required).
Additionally you can implement a little hook into the system, that the permissions are automatically set at boot, and optionally also Glove Mode will be enabled, root are required for these implementations.
With this application you can check the battery charging electrical current of your Samsung Galaxy devices.
*Note: please check the compatible devices list below*
Please check the Pro version (in Google Play) which also has widget to let you quickly check the charging current, auto-refresh, current notifications, a dark theme, and no ads!
The application *may* not work on the following devices:
- Galaxy Note 4 with Qualcomm processor.
- Galaxy S3 Mini.
- Sprint devices.
- Verizon S3 devices.
- Any device older than the Samsung Galaxy S3 (Galaxy Note 1, Galaxy S2, ...).
Note: The internet permission is needed for the ads. Please check the Pro version (in Google Play) which has no ads and does not need that permission.
- Most Galaxy S5 models (reported by users).
- Most Galaxy Note 3 models (reported by users).
- Most Galaxy S4 models.
- International Samsung Galaxy S III (GT-I9300 and GT-I9305).
- South Korean Samsung Galaxy S III (SHV-E210K/L/S).
- International Samsung Galaxy Note II (GT-N7105).
- South Korean Samsung Galaxy Note II (SHV-E250S)
- Verizon Samsung Galaxy Note II (SCH-i605).
It may also work on other devices, but such is not guaranteed.
Gear Tag Writer provides an option to write Gear's bluetooth address to its charging cradle.
Use Gear Tag Writer when changing the Gear or charging cradle.
How to use
1. Tap the device name in the Gear's setup wizard screen, then check the Gear's bluetooth address.
2. Input the Gear's bluetooth address into the Gear Tag Writer input field, then press the Ready button.
3. Bring the mobile device near to the Gear's charging cradle, back to back.
4. Samsung Galaxy Gear and the mobile device are now paired.
Please do not use this app thoughtless or without DEEPER knowlege of Android (Root, Custom Recovery, etc.)
This app flashes and backups your device recovery and kernel without rebooting it very fast and easy without a PC or any outside influence.
This app have over 3500 build-in recovery collection of images (ClockworkMod/TWRP/PhilZ) also you are able to flash unlisted images from external or internal storage.
Rashr is able to flash over 90% of all Android devices!
This project is fully open-source and.
★Open-Source (on GitHub: https://github.com/dslnexus/Rashr)
★OpenRecovery Script manager to flash ZIPs
★Over 3500 Build-in Recoveries (ClockworkMod/Touch, Team Win Recovery Project and PhilZ-Touch)
★Flash Kernel and Recoveries without PC
★Flash already downloaded IMGs from internal and external storage
★Backup Kernel and Recovery IMGs without PC
★Full command logging for more control what this App is doing
★If you don't want to support my work you are able to disable the Ads
★Free full app without Ads and any restrictions
★Support my Work only if you want (with Ads or In-App donations)
----- App-Permission and why Rashr need it -----
-Read and write on external storage: save recoveries images or read already downloaded images
-Full network access: download recoveries, kernel and updates
-Google Play billing: donations over Google Play
-[Superuser-App]Full access to all functions of the device: Flashing recoveries and kernel
The only Universal Smart Remote Control for TVs and Home Electronics you'll ever need!
Smart IR Remote is the only IR remote universal app for Android that you'll ever need: it's smart, with a device coverage that is huge (800000 devices, with more added daily and on request), and it's the only one that makes use of features only your phone/tablet have, that a plastic remote (like the Logitech Harmony) never will. As IR remote controls go, especially android remote controls, you'll never find one better!
Not compatible with Huawei, Vizio or Sony phones. Of all phones/tablets by LG, only compatible with the G3 (still in Beta, sending only, not recording. Not compatible with LG G3 A or LG G3 S)
Don't have a supported phone or tablet? Check out AnyMote Home: http://anymote.io
Smart Remote works with any Samsung, HTC and Medion Lifetab devices with an InfraRed Blaster, and most other brand phone/tablet with an IR Blaster that runs Android 4.4 or above provided originally by the manufacturer. Even better, Smart IR Remote also works on most custom ROMs like CyanogenMod.
Smart IR Remote is an universal smart remote control that can command almost anything that receives InfraRed commands, like a TV, Set Top Box (cable and satellite box), DVD, BluRay player, VCR, Amplifier, Air Conditioner, AV Receiver, DSLR camera, etc. Better yet, you can combine your remotes into smart remotes (activities) so that on your custom remote you'll have the volume buttons to your surround system, the channel buttons to control your set top box and the display buttons to control your TV. It's the only Android universal tv remote that can do that, while controlling any other device too!
Have any questions? Visit our FAQ: http://colortiger.com/faq.php
If your remote is missing, please email us and we'll do our best to help!
On top of all that, since you're holding a phone, why not use some of its unique features?
AIR GESTURES - exclusive to Galaxy S4/S5
Simply wave your hand above your phone to change channels, volume, or whatever your heart pleases - it's all configurable!
MUTE/PAUSE ON PHONE CALL
Smart Remote can now mute your TV, pause your media player, or even switch them off if you wish, all of that when your phone rings.
Group commands in batches, sort them and add delays, and then execute the series of commands one after the other. Imagine being able to turn your TV, Xbox and surround system on, switch TV to HDMI 1 all with a single tap!
Automatically execute commands or macros when certain conditions occur: your phone rings, at a time chosen by you, when you use your phone's Volume Buttons. Are you a Tasker fan? We have a Tasker plugin that lets you to send commands
With homescreen widgets, you'll have your favorite commands just a tap away when you grab your phone. Need something even better? read on
FLOATING REMOTE (CHATHEAD)
The floating remote is a remote that stays above other apps which can be shown with just a single tap and lets you send commands even while you're playing a game on your phone
BACKUP / RESTORE
If you switch ROMs often or need the remotes you put hard work on to be available on all your devices, you can simply make a backup once and then restore on all your other devices
RECORD REMOTES - exclusive to the HTC One due to hardware limitations in other devices
Couldn't find your remote in our list? Simply record each button to have it just the way you want it. Opt in to share your remote so that other customers can make use of your work too!
99% brands in the world are supported, including Samsung, Sony, Toshiba, Panasonic, Yamaha, DirecTV (Direct TV), etc.
For details about needed permissions, visit http://www.colortiger.com/#permissions on your computer.