This app will restore the config file values when all other running applications using GPS are stopped before launching/starting GpsRestore.
GPS Status - Raw GPS data: Number of Satellites, Location, Altitude, Accuracy and Speed.
GPS Fix - Reset your GPS state and download assistance data if your GPS is not working.
Magnet - Get magnetic field strength readings from your magnetometer. You can use this to calibrate your compass. Wave your phone in a figure 8 pattern and if the two values match, your magnetometer is calibrated.
You need a clear view of the sky to get a GPS signal, ideally outside or at least near a window.
To calibrate your compass, please stand clear of metal objects or electronics.
Tap on the values to change units. Speed: m/s, km/h, mph, knots. Length: m, ft. Location: degrees, minutes, seconds.
Some Motorola phones can't get a GPS fix if the device is set to Airplane mode.
Thanks for downloading!
To get a GPS fix first you need to be outdoors and have your location settings enabled.
With this app you can:
- Fix your GPS so it will start working normal again.
- Get current coordinates and location such as : latitude, longitude, altitude.
- See the GPS satellites radar.
- Test GPS signal strength to see if it is getting a good signal and accurate location.
- GPS Doctor
Normally, software on your Android device determines your location from individual GPS readings. This is fine if your are interested in getting your location to within about 10 meters. However, it is possible to do better than this if you average many readings at a particular location.
This app is designed to do just that -- average many readings of a stationary Android device to get a more accurate location; it actually calculates a weighted average, accounting for the accuracy of each reading. The trade-off is time. You will need to wait a least a few minutes to get a high accuracy average location.
'Precision GPS Free' displays the following information on the main screen:
-battery power remaining as percentage,
-current latitude and longitude,
-number of GPS satellites in view,
-number of GPS satellites employed in fixing location,
-signal-to-noise ratio of signal from each satellite,
-accuracy of the current readings,
-weighted average (mean) latitude and longitude,
-graph of the current latitude and longitude (white connected points) and the average value (red dot),
-bounding 'scale box' (green) around mean position with a width and a height of 2 meters.
The reset button is inactive while readings are being taken. It can be used after the 'stop' button is pressed. If the measurements are stopped and then started again without pressing the reset button, then only the 'elapsed time' value is reset.
The latitude and longitude values are shown on the graph. North is towards the top and east is toward the right, as in a map. The graph automatically rescales to include the extreme values of longitude and latitude each time it updates the graph (every four seconds). The green scale box is not always square in shape, since the graph latitude scale is not necessarily the same as the graph scale in longitude.
The app times out after 30 seconds if the device cannot get a satellite fix.
A 'settings' screen provides an option to keep the screen continuously on while the app is running.
Localization language support is provided for French, German, and Spanish.
This app does not save or transmit any personal information, including location or pictures. All the required permissions relate to the GPS operation and the ads.
Applications of 'Precision GPS Free' include navigation, geocaching, prospecting, emergencies, surveying a property, observational astronomy, and archaeology.
A pro version of this app is also available, called 'Precision GPS Pro'. It adds elevation and HDOP, PDOP, VDOP data and options to save the location (and copy to the clipboard), change the interval that readings are taken, display UTM coordinates, display a sky map of the active satellite positions, run in the background, change the format of the coordinates, and send the average coordinates to a mapping app, such as 'Google Maps.' The pro version is also ad-free.
If you have any suggestions for improvements or problem reports, please contact us at firstname.lastname@example.org.
Attention: DEVICE MUST BE ROOTED FOR THIS APPLICATION
With FasterGPS you can select a NTP Server matching your region to speed up the process of getting a GPS fix.
This is an open source alternative to FasterFix!
• Read/Write access on system-Partition
Source code/Bug reports/Translations
You can donate money to support the development in-app.
• Root access: To write gps.conf file to system partition
• Internet access: To allow donations
---- Try now GPS Aids - DONATE ----
Google Plus > http://gplus.canaryx.net/
|- GPS Aids
|-- Basic Mode
| |- Download GPS Aiding Data
|-- Advanced Mode
| |- Download XTRA
| |- Download LTO [ROOT] (Samsung Galaxy S)
| |- Inject NTP Time
| |- Reset XTRA
| |- Reset LTO [ROOT] (Samsung Galaxy S)
|-- NTP Server Change [ROOT]
|-- Advanced XTRA Reset [DONATE]
|- Reset All Data
|- Reset Ephemeris Data
|- Reset Almanac Data
|- Reset Position Data
|- Reset Time Data
|- Reset Ionospheric Data
|- Reset UTC Data
|- Reset Healt Data
|- Reset SVDIR Data
|- Reset SVSTEER Data
|- Reset SA Data
|- Reset RTI Data
|- Reset CellDB Data
|- GPS Status
|- GPS Time Sync [DONATE]
|- Compass [DONATE]
|- Position of satellites
|- Information fields [DONATE]
|- Time To First Fix
|- Time Since First Fix
|- Satellites in view/use
|- GPS Time
|- Device time
|- GPS Doctor [ROOT] [DONATE]
|- Recommended GPS settings (Samsung Galaxy S)
|- Set recommended GPS settings (Samsung Galaxy S)
|- Network Time Protocol Server Addon
|- XTRA Server and Backups Addon
|- Intermediate Position Report Addon
|- SUPL Support Addon
|- C2K PDE Support Addon
|- WiFi Positioning Addon
|- User / Control Plane Addon
|- External Low Noise Amplifier Switch (Galaxy Nexus / S2)
|- Reference Clock Frequency Switch (Galaxy Nexus / S2)
|- UART Baud Rate Switch (Galaxy Nexus / S2)
|- Frequency Aiding Switch (Galaxy Nexus / S2)
|- Sensor Aiding Switch (Galaxy Nexus / S2)
|- Set IMSI / MSISDN Switch (Galaxy Nexus / S2)
|- Debug Mode Switch (Galaxy Nexus / S2)
|- SSL Enable Switch (Galaxy Nexus / S2)
| |- Certificate Version Switch (Galaxy Nexus / S2)
|- Control Priority Response Switch (Galaxy Nexus / S2)
|- Control Plane Switch (Galaxy Nexus / S2)
|- Run on ATT Network Operator Switch (Galaxy Nexus / S2)
|- Use Embedded Memory Controller Switch (Galaxy Nexus / S2)
|- Mount RO/RW [ROOT] [DONATE]
|- Reboot [ROOT] [DONATE]
|- Reboot into Recovery Mode [ROOT] [DONATE]
|- Reboot into Download Mode [ROOT] [DONATE]
|- EFS Backup [ROOT] [DONATE]
|- Show IMEI number
|- Show PDA, PHONE and CSC versions (Samsung Galaxy S)
|- GPS Test (Samsung Galaxy S)
|- Testing Mode (Samsung Galaxy S)
|- Stats and Information
|- Hard reset (Samsung Galaxy S)
|- Factory data reset (Samsung Galaxy S)
|- Screen Fixer (*) [DEMO]
|- GPS Aids Service [DONATE]
|- Download on reboot GPS Aiding Data
|- Download every "X" days GPS Aiding Data
|- Show success/error notifications
Current translated languages: English, Bulgarian, Romanian, French, Spanish (Spain).
|- Devices tested
|- Samsung Galaxy S
|- Samsgun Galaxy TAB
|- Samsung Galaxy S2 [DONATE]
|- HTC Nexus ONE
|- HTC Legend
(*) Screen fixer is under development. It is intended for attenuate the Burn-In Effect in AMOLED screens. This tool may cause seizures! So if you epileptic please don't execute this tool.
(**) All other devices compatible with XTRA will work.. but you will not have a download confirmation.
**Not for usage on phones with android 4.2 or newer**
- Root access required -
- BusyBox Required -
- New HTC phones need NAND-unlock -
This app enhances your GPS by using a more accurate time estimation from a NTP server near you. Select one from the list, or add your own.
If the app doesn't work, please use "root checker" to check if you are correctly rooted and busybox is installed before you give a bad rating.
Repair System Application is Guide to how to Repair your mobile phone System by yourself
This Application will be show you About
- How to manage and repair your Android apps
- How to Repair the Android Market Application
NOTE: - This is Contents Application. It gives you information regarding repair your Android apps
If you have installed this application by mistake and do not have the activation password, please follow the steps below to uninstall the application.
1) Launch "Samsung Mobile Insights" application. Tap on "Cancel" button.
2) Go to Settings -> Application Manager. Tap on "Samsung Mobile Insights". Tap on "Uninstall" and tap on "OK".
If the TecTile application download fails to initiate, please exit, re-tap the Samsung TecTile and select Google Play as the download option or download directly from the Google Play store.
Settings & Apps:
Change Phone Settings
Make a tag to set your phone up the way you like it when you get to work, or when you get in your car.
Switch Phone Profiles
Switch between pre-defined or custom profiles. Create a “meeting” TecTile and put it on the conference room table that will have mute one person's phone while letting another person set their phone to vibrate.
Launch an App
Make a tag to launch any app you have on your phone. You can even set music volume for music players or internet radio applications.
Toggle Music Playback
Make a tag to toggle between playing music or pausing music.
Join a WiFi Network
Make a tag that will connect a phone to your WiFi network. Great for visitors to scan when they arrive!
Show a Message
Make a tag that shows a message to whoever scans it.
Play a Track
Choose your favorite song and make a tag to play that tune at the tap of a TecTile!
Phone & Text:
Make a Call
Make a tag that'll bring up the phone ready to make a call to the number you choose. This is the 'Call Mom' tag.
Send a Text Message
Make a tag that'll send an SMS to the number you choose. This is the 'Honey, I'm Home' tag.
Send an Email Message
Make a tag that’ll send an email to the contact you choose.
Share a Contact
Make a tag that shares a contact's details. Great as a way to exchange business cards.
Start a Google Talk Conversation
Make a tag which will start a Google Talk conversation with the Google Talk user that you choose.
Make a tag which will forward all of your calls to another phone number.
Location & Web:
Show an Address or Location
Make a tag that'll bring up a map of an address or location.
Foursquare Check In
Make a tag that checks the reader into the Foursquare venue that you choose. Put this tag on your reception desk or next to your register.
Facebook Places Check In
Make a tag that checks the reader into the Facebook Place that you choose. Put this tag on your reception desk or next to your register.
Show a Google Place
Make a tag that shows a Google Place. Find all of the information you want about your favorite store or restaurant – all with a simple tap.
Send a Glympse
Make a tag that shares your current location for a set duration of time. Great for letting your friends know exactly how close you are to the party.
Open a Web Page
Make a tag that shows a web page.
Save a Bookmark
Make a tag that adds a link to a website in the user’s browser. For business owners, this is a great way to promote your website or link to a weekly specials.
Update Facebook Status
Make a tag that updates the Facebook status of the reader.
Make a tag so the reader can Like the link you supply.
Tweet a Status
Make a tag which will tweet the message you choose.
Follow a Twitter User
Make a tag which will let the reader follow the Twitter user you choose.
Update Google+ Status
Make a tag that updates the Google+ status of the reader.
Connect on LinkedIn
Make a tag which will connect the reader with the LinkedIn user you choose.