HC11-Controller Pro

teraKUHN

About this app

Turn your smartphone into a 68HC11 embedded microcontroller. The HC11Controller Pro app is for simulating a 68HC11 and controlling hobby lights or motors. This app allows you to load *.hex files built for a 68HC11 embedded microcontroller. You can use KCC11, KPC11 or any other IDE/compiler you want to create the *.hex files. Once opened, you can then run the program and the simulator will indicate which 68HC11 outputs are on or off.

The HC11Controller Pro app also allows you to control hobby lights or motors through an Android device's USB-OTG (On The Go) port. This app allows you to set (turn on) or clear (turn off) up to eight signals (68HC11 A6-A7 and D2-D7). To use this feature of the app, you need to plug together your own harness from an Android device with USB-OTG hardware support to an IEEE-1284 parallel printer port. After that you need to build your own light or motor interface to the parallel ports binary outputs. For more details, please visit https://terakuhn.weebly.com/phone_usb_controller.html and https://terakuhn.weebly.com/arduino_controller.html.

Further, in addition to output the simulated 68HC11 ADC input ports allow you to sample Android sensor inputs if you are running on an Android device with light, pressure, proximity, relative humidity, or temperature sensors.

What’s new

Initial release of HC11-Controller Pro