It implements primary functionality of the Ekahau T301BD Wi-Fi Pager.
It supports messaging and instant notifications, as well as the buzzer feature !
The configuration of the Ekahau Server settings is made in the App.
In addition the maintenance interval and the location update interval may be configured in a Server sided config. If the config is assigned to the device, the Server sided config overwrites the local settings.
Instead contact us on insomnia(at)gosar.de. The rating is useless for feedback as it provides no email address for us to contact you for details about feature request etc.
Stay connected to the strongest available WIFI, including unknown, but unsecured networks. That's the main task of Wifi Jumper!
The complete feature list:
- Automatically connect to the strongest available WIFI (scaninterval configurable)
- Even unknown, but unsecured networks can be used automatically (configurable)
- Messages and icons in status bar (configurable)
- Autostart after boot (configurable)
- Optional: create Wifi Zones based on one or more Radio Cells to automatically start and stop Wifi Hardware.
- Automatically adds new Radio Cells to known Wifi Zones while connected to WIFI
- Show Zone on Map (if Google Maps is installed)
- Optional: define "Airplane Mode Timezones" with the "Airplane Mode Scheduler" to automatically start/stop airplane mode (DOES NOT WORK WITH ANDROID >= 4.2 !!!)
- Saves an high amount of energy if all features are used
- Easy to use
- Multilingual (german, english)
- no support for custom roms!
- wifi zones work only on devices with telephony features
- Due to new restrictions by Google, the airplane mode scheduler is not working with android >= 4.2
Wifi Jumper automatically connects your device to the strongest available known WIFI network. Unknown, but unsecured networks are also supported to be connected to. Additionally, one can define "WIFI Zones" based on the current radiocell, in which your WIFI hardware will automatically be activated.
Leaving a Wifi Zone, Wifi Jumper will turn off WIFI hardware and saves energy. New cell-Ids for already defined Wifi Zones are added automatically while connected to a known WIFI.
In order to save even more energy, you are able to define timezones in which the airplanemode will be automatically (de-)activated. The advantages are not limited to energy saving: no radiation and disturbance while sleeping. Wifi Jumper is the perfect solution for many minor issues, but in only one app.
Note: Wifi Jumper uses android functionality that didn't support App2SD. We strongly recommend to make no use of App2SD!
Wifi Jumper needs the following permissions (reason):
- Location (determine position of WIFI Location on a map)
- Telephony (gather system-id)
- System utilities (autostart, airplanemode start/stop, WIFI start/stop)
- Networking (license check, scan for networks und status)
Note: Please give us a chance to improve Wifi Jumper. Let us know about any bad experiences and problems with Wifi Jumper before leaving any bad comments. We work hard to fix any issues reported by our customers. Thank you very much!
S7-300 S7-400 S7-1200 Logo S120
S7Android use a libnodave-java modify library.
As libnodave write:
* WARNING: This and other test programs overwrite data in your PLC. *
* DO NOT use it on PLC's when anything is connected to their outputs.*
* This is alpha software. Use entirely on your own risk. *
This is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
There will be no icon installed for the donate version but the apk is visible from Settings - Applications.
This license removes the ads but does not enable any feature.
Please don't use the market's feedback system for support. In case of issues or for any question or suggestion please contact me by e-mail or use the contact information from the about box.
Now you can synchronize from, to and between over 100+ different services! And that’s not all, the app also includes the most complete file manager you have ever seen.
How to setup synchronizing:
1. Add the required remote accounts inside the app
2. Add a Sync profile and set the left side and right side
3. Customize all the settings, save and run!
- Synchronize from, to AND between over 100+ different clouds
- Define include/exclude/start/stop/condition/notification rules
- Built-in advanced file manager
- Use the PHP Script / MySQL manager / server 2 server support
- One way or two way synchronization
- Tasker / Locale / Llama plugin (action, condition AND event plugins)
- Way more!
File Manager features
- On tablet / HD screen use multiple File Manager fragments
- Auto upload an edited file
- Create multiple File Manager sessions
- Copy, paste, cut, move, copy, etc
- Send, Share, Email
- Zip / Unzip files (compress / decompress)
- Rename, properties, open, open as, edit, edit as
- Hidden files, select multiple, sort, server status, manual change dir
- Way more!
★★Most complete synchronize app!★★
- SSH Client
- Terminal / Shell
- Root Explorer
- Android 5.0+ sdcard write support
- Email Client (POP3/IMAP)
- FTP Client / FTP FXP Client
- FTPES Client (SSL/TLS explicit)
- FTPS Client (SSL/TLS implicit)
- Gopher Client
- NFS Client
- OpenStack Object Storage Swift Client
- PHP Client Script
- PHP MySQL Client Script
- S3 Client
- SCP Client (Secure Copy Protocol)
- SFTP Client (SSH File Transfer)
- SMB Client / Samba Client / CIFS Client / Windows Share Client
- Styx Client
- TFTP Client (Trivial File Transfer Protocol)
- WebDAV Client (HTTP/HTTPS)
Cloud services supported
- Amazon S3
- Amazon S3 Government
- Aruba Cloud
- Avira Secure Backup
- Billion Uploads
- Cloud Harddrive
- Constant Cloud
- Dump Truck
- Dunkel Cloud Storage
- EMC Atmos
- Enter Cloud Suite
- EVault LTS2
- GMX Mediacenter
- Folio Cloud
- Google Drive / Google Docs
- Google Sites
- Google Storage
- GreenQloud Storage Qloud
- Hightail / YouSendIt
- Hitachi Content Platform
- Host Europe
- Internap Aigfiles
- Iozeta Livedrive
- Jungle Disk
- Memset Memstor
- MEO Cloud
- MySQL Backup (PHP)
- Nifty Cloud
- OneDrive / SkyDrive
- Oracle Storage Cloud Service
- Oxygen Cloud
- Seeweb Cloud
- Storage Made Easy
- Synology File Station
- Trend Micro SafeSync
- Ubuntu One
- Varsity Cloud
- Yandex Disk
- Zimbra Briefcase
* only for cloud paid plans
** read only
synchronize, sync, syncing, folder sync, foldersync, dropbox sync, google sync, sync device, sync folders, sme, dropsync
What are the permissions for?
- SMS: start/stop profiles and/or send notifications
- INTERNET: the remote accounts (FTP, etc)
- RECEIVE_BOOT_COMPLETED: optionally auto start the app on boot
Transform any Android device into a BACnet HMI (Human-machine interface).
Create mobile applications with native BACnet access using standardized web APIs on the Android platform.
✔ Access BACnet devices on the local network (Wi-Fi) or Register as a Foreign Device to a remote network through the cellular network or Wi-Fi.
✔ Allows to perform read and write operations on the property Present_Value for objects of the following type:
Binary Input, Binary Output, Binary Value, Analog Input, Analog Output, Analog Value, Multi-state Input, Multi-state Output and Multi-state Value.
✔ Allows to read most available properties of the BACnet objects.
✔ Support for write command Priority (selectable priority and NULL value / Relinquish Default).
✔ Create dynamic user interface for tablets, phones and other devices.
The screenshots are provided as example.
- BACnet® is a registered trademark of ASHRAE.
- Android is a trademark of Google Inc.
There is no graphical user interface for this app. So first install this app, then androidlost, wait a few minutes and finally log in to www.androidlost.com. If all goes well you should get a "Congratulations..." message.
Please note that there is no guarantee that the registration will take place. If the thief has blocked your account (if your phone is locked and he has tried three times) or has done a factory reset you will not be able to install any app.
After a successful registration you should uninstall this app. Otherwise this app will test if the app is registered correctly all the time.
Requires androidlost version 2.15 or higher on phone.
Please note that google has changed the android API so this app only works on android version < 3.
Questa applicazione consente di interfacciarsi con uno smart-relè Zelio provvisto del modulo Ethernet connesso a un Access-Point.
Una volta digitato l'indirizzo IP del modulo Ethernet dello Zelio e attivata la connessione è possibile
leggere i registri interni dello smart-relè, in particolare sia quelli "scrivibili" (denominati j1XT1, j2XT1, j3XT1 e j4XT1) 4x00016, 4x00017, 4x00018 e 4x00019 sia quelli solo "leggibili" (denominati o1XT1, o2XT1, o3XT1 e o4XT1) 4x00020, 4x00021, 4x00022 e 4x00023 (scritti dall'interno del programma dello Zelio in FBD)
I valori letti sono rappresentati in modalità:
UINT=> 16bits non segnati
INT=> 16bits segnati
BIN=> 16bits rappresentati in nibble (in gruppi di 4)
E' anche possibile, selezionando il registro relativo scrivere un valore settabile in modalità UINT oppure con 16 selettori uno per ciascuno dei bits componenti la variabile medesima in modalità BINARIA.
Sono stati implementati alcuni controlli sui campi indirizzo IP, selezione registro da scrivere e valore impostato in tale registro.
Lo stato della connessione è sempre disponibile in alto a destra dello schermo.
La visione del filmato facilita la comprensione della modalità operativa nell'uso dell'applicazione
This application allows you to interface with a smart-relay Zelio provided Ethernet module connected to an access point.
After entering the IP address of the Ethernet module and the Zelio activated the connection is possible to read the internal registers of the smart-relay, in particular and those "writable" (called j1XT1, j2XT1, j3XT1 and j4XT1) 4x00016, 4x00017, 4x00018 and 4x00019 and those only "readable" (called O1XT1, o2XT1, o3XT1 and O4XT1) 4x00020 , 4x00021, 4x00022 and 4x00023 (written from within the program of Zelio in FBD).
The values are represented in the mode:
UINT => 16bits unsigned
INT => 16bits signed
HEXA => hexadecimal
BIN => 16bits represented in nibble (in groups of 4)
It is possible, by selecting the record to write a value (settable mode UINT) or with 16 switches one for each of the bits making up the same variable in BINARY mode.
Have been implemented some controls on the fields IP address, selection register to write and value set in this register.
The connection status is always available at the top right of the screen.
The vision of the video facilitates the understanding of the mode of operation in the use of the application
The communication is done via WIFI. The mobile or tablet is sending short UDP telegrams to the PLC. Of course the connection is monitored for disturbance. A CRC check and a MAC ID filtering is also implemented. In such a case the outputs will be disabled. IP address and port for the communication can be changed.
Sample functions blocks are available for following PLCs:
Siemens S7 with CP 343
Omron CS/CJ series
A test software for the PC and samples are available on my website too.
The communication protocol is open, so it is possible to implement any other PLC which can do UDP communication.
Additional software can be found using the link button to my website below.
IMPORTANT: for use in machines please observe the safety regulation of your country.
Variables appear in pages as custom list.
Supports most PLCs, Omron cs / cj / cp with ETN module Siemens 1200 direct. Any plc that supports
Drivers Emerson Control Techniques (Unidrive, Commander etc...).
Display types: Boolean, Int16, Int32, UInt16, UInt32, Hex16, HEX32.
Interact with multiple PLCs simultaneously.
No intermediate servers or equipment needs, only network.
High speed communication with high-performance drivers.
Anyway, this handy little app is for locksmiths and calculates the pin matrix (pinning) for an interchangeable core (IC or ic core) when given the pinning for the CK, MK, GM, GGM, and control. You can also change the stack, and pin factors if needed (this allows you to use A2, A3, and A4 systems).
It is application to break off trouble of such you.
/// How to ///
It switch on the PC automatically at a point in time when phone connected with home WiFi.
/// function ///
* It start a PC with Wake on LAN (WOL) automatically if connected to the access point which you set.
* It register yourself to greatest five of them beforehand and can start at the same time.
* You can start all the PCs registering by manual operation.
* It can start by manual operation in individual treatment.
* It come in ON/OFF by automatic start.
* You can set mute time.
/// attention ///
* It is necessary for the PC which it want to start to support Wake on LAN.
* It is necessary to set the BIOS.
* There is a case to have to change the setting of the network adapter.
* I do not understand whether I can start because an author does not have Mac.
Mac book Pro seems to be able to play the Return key from sleep.
* Let's Note N9 was able to start only from a stop state.
/// News of the pay version (PcAutoWakerPlus) ///
* Widget. Quick wake up.
* Data management.
Save to microSD card.
Load from microSD card.
/// Special Thanks ///
Have you ever found places where you would like to ask your friends to go, but you don't know the address?
Have you ever found interesting places where you forgot how to get there because you don't know the address?
Have you ever in a situation which you give directions to your friend, but you friend tend to have the address instead?
This application can help you.
This is a simple application which ask for your current GPS location and estimate your current address.
This application also have save and edit features meaning:
- you can save places
- you can lookup the saved places
- edit the name, address, category or notes whenever you want
Estimating the address need to have Internet access, and thus many people may not want to use data for this !?!?
Don't worry, this application can take care of this problem.
Users can use this application to save the place's GPS coordinate, and of course the address can't be determine at this moment, once users have access to a free wifi connection, users can click the "Estimate Address" to get the place's address.
However, people may not have a clear image by only looking at the address??
Once again, don't worry, this application integrated Google map in it. The Google map will have a little Android robot standing on top of the location. Therefore, users not only have the address, but also have a clear image from the map.
Not all places can have GPS reception (Out-door preferred).
The estimated address may not be familiar to you, but by plugging in the estimated address to any GPS navigator, it'll direct you to the place.
THIS IS THE APP FOR YOU!!!
Wifi Wakeup can turn on WIFI connection when specific time is met. In addition, the WIFI can also be waked up for saved locations. Last but not least, this app is smart enough to disconnect your WIFI connection if WIFI data is not connected to save battery life.
Users can turn off WIFI and data at night while sleeping to save battery/data usage. This app can help to turn on WIFI at a specific time so that you will not miss any important emails (if sync'd) or messages.
User can also to set turn on WIFI connection automatically when back to home/office to avoid over used of mobile data.
User can set the app to turn off WIFI if WIFI connection is not found to reduce battery usage.
== Free Version ==
The app will pop-up when the time is met
== Pro Version ==
Wifi will be waked-up in background (i.e. nothing will be popped-up)
Support and update frequently
Great application when you are in a cafe/restaurant and wondering how much tips do you want to give.
This application also helps you to split the amount of total need to be paid among with your friends.
* Easy to use
* Quick Tips button
* Freedom for users to change the default values
-- version 1.2 --
resolved the orientation change issue.
For each game, a value n is randomly chosen. All divisors of n 'alive'. Players take turns picking a live integer. Not only is their pick eliminated, but so are all divisors of that pick. The player who picks the integer n loses.