Phone tester is a free app that allows you to analyze and test your device's hardware and components, to make sure everything is operating correctly.
You'll be able to test the following:

***SENSORS***
Accelerometer, gyroscope, compass, proximity sensor, pressure sensor... You'll be able to check which sensors are supported by your phone and all the information and values provided for each sensor.

***WIFI***
You'll be able to check your LAN status: internal & external IP, gateway, DHCP server...

***TELEPHONY***
Signal, network type, external IP, SIM data...

***GPS***
You'll see the real data provided by the GPS: satellites, latitude, longitude, altitude, speed...

***BATTERY***
Level of charge, time on, temperature, health...

***MULTITOUCH***
How many points of contact does your device recognize?

***SYSTEM INFORMATION***
Information about hardware and software like CPU, RAM, kernel version, screen...

This app is similar to EVEREST or AIDA64, but apart from showing the components and system information, it also shows sensors readings.

The Pro version of Phone Tester displays more information (CPU speed, phone memory, sd card memory) and removes the ads.

* Uses your phone or tablets proximity sensor
* Shows continuous values from the sensor
* Plots a time series chart
* Additional info about the hardware and capabilities

*** ROOT ONLY ***

This utility can be used to recalibrate a dirty or worn proximity sensor on your HTC rezound. If you are not rooted this utility will not work for you.

Want to feel what gestures can do? here's an application which will let you turn of your screen just with a swipe!! yes that's right!! All you have to do is swipe your hand over the proximity sensor (Located near the earpiece on top of the phone).

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FQMVBPXQ6PERN

Features:
1) Turn off the screen by sliding your hand
2) Turn off the screen by Covering the sensor for a duration of time (Tap and Hold)
3) Turn on the screen by Covering the sensor for a duration of time (Tap and Hold) - Note: This can cause Battery Drain
4) Enable screen on/off during calls only
5) ScreenOff shortcut, to turn off the screen by launching the app.
6) Based on your device select the sensor of your choice, or the one that's available and configure their values, as they are different for different devices.

Motivation to build this app:
1) While the phone is in pocket, and you have your bluetooth headset connected, even though you can answer your call with a click of bluetooth headset button, because the screen goes on and remains on, your call may hang-up or go on hold or probably few buttons may get pressed, isn't that annoying?
2) Lot of android phones don’t turn off the screen when phone is held close ear (You may end up hanging up on someone)
3) Accidental call pickups: Since capacitive screens are sensitive to touch as well as heat, An Incoming call gets picked up automatically when phone is in the pocket (And we get obliged to speak to annoying calls)
4) Its Cool!!!
5) If you are a HD2 user, you would know the pain. Many users have replaced that hardware buttons due to usage!!!

NOTE: To un-install, go Settings, Locations & Security, Select Device Administrators and disable the ScreenOff App

For Support: Post you questions on http://forum.xda-developers.com/showthread.php?p=9884280#

Tested On:
1) HD2, Desire HD, Nexus One, Motorolla Xoom(Light Sensor), DROID Incredible

This app requires root access, if you don't know what that means don't install this app

If you have problems with your proximity sensor? Or the screen stays black after a call. It's most likely the sensor, this app will fix that.

Tested on:
Note II, GT-N7100

Please send a mail to vrognaas@gmail.com if you encounter any problems.

I am a developer in the inital phase, i would be very happy if you would buy me a bee.

Paypal: vrognaas@gmail.com

Bitcoin: 1L9Dij6aWporFMfz5kS1BYGZx39YukN5sS

Reenable proximity sensor on call.

How does your phone compare with your friend’s phone? Does it have a more advanced accelerometer or gyroscope? What other mysterious high-tech sensors does your tablet have hidden on board, and what do they do? Find out with Sensor Kinetics.

Sensor Kinetics is an advanced viewer and monitor for all of the standard sensors available in your Android device. The new built-in Multi-Sensor Recorder allows you to record up to six kinetic sensors simultaneously.

Written by one of the pioneers of the use of accelerometers and gyroscopes within the modern smartphone, it provides a comprehensive look at the total dynamics of the combined operations of all the sensors.

The app demonstrates the use of the accelerometer, gyroscope and the rotation sensor to control a tilt based view navigation like the RotoView technology by INNOVENTIONS. It also demonstrates the operation of the magnetic sensor, the linear acceleration sensor and the gravity sensor within special graphical displays.

Use Sensor Kinetics to monitor and understand the behavior of the sensors while you change the delay setting or activate/deactivate specific sensors. Each sensor is attached to a sophisticated chart viewer. The Multi-Sensor Recorder records multiple sensors simultaneously at a controlled data rate. If you need to save or share sensor charts, please purchase the companion Sensor Kinetics Pro.

For educational users, the app includes comprehensive help files which provide physics students with hands-on knowledge of how these sensors interact with smartphones and suggest numerous experiments you can perform on your phone or tablet.

Who Should Use Sensor Kinetics?

Developers, students, hobbyists, technicians, engineers... anyone who's curious about what lies "under the hood" of their mobile device!

Test your Android phone or tablet: Sensor Kinetics allows you to test all of the sensors on your device. For example, you can quickly determine if your Android device has a gyroscope sensor and how fast it's operating. The numerous chart viewers allow you to measure any sensor over time and gauge their accuracy and behavior.

Educational: Sensor Kinetics demonstrates the physics of gravity, acceleration, rotation, magnetism and more as these forces are measured by your phone or tablet. The app includes comprehensive help files with easy to understand information and experiments you can perform with the sensors.

App Developers: View in detail the behavior of the sensors used in your apps. Compare the performance of advanced sensors like gyroscope, linear acceleration sensor and the rotation sensor.

This app relates to gyroscope and accelerometer data logging, magnetometer, smart scroll, science, physics, tilt measure, pressure sensor, relative humidity sensor, light sensor, linear acceleration, temperature sensor, proximity sensor, gravity sensor, MEMS, kinetics

Sensor Box for Android detects all available sensors on your Android device, and vividly shows you how they work with amazing graphics. Sensor Box for Android also tells you which sensors are supported by the hardware, and provides extremely useful sensor tools that could be used in our daily life.

Sensors included
- Gyroscope Sensor
Gyroscope sensor can measure six directions at a time. You will be able to see the effects immediately by rotating your phone slightly. Now Gyroscope sensor is mostly used in 3D game development, and possibly indoor navigation in future.

- Light Sensor
Light sensor is applied to detect the light intensity of the environment, and then adjusts screen brightness and determines whether to turn off the keyboard light. Test the effect by putting your phone in dark place and retrieving it.

- Orientation Sensor
Orientation sensor is applied to detect direction status of the device, i.e. auto rotate screen when device is rotated horizontally. It can also be used as measure equipment like Spirit Level.

- Proximity Sensor
Proximity sensor measures the distance between two objects, usually the device screen and our hands/face etc. Test the effect by moving your hand forward and backward in front of the device in Sensor Box for Android.

- Temperature Sensor
Temperature sensor provides information about your device temperature, thus you can take action when the temp is too low or high.

- Accelerometer Sensor
Accelerometer sensor is applied to detect device directions, i.e. auto rotate screen when the device is rotated vertically. It is also widely used in game development.

- Sound
Sound detects the sound intensity around you and provides you detailed information about the intensity changes.

- Magnetic Field
Magnetic Field is used in many areas like metal detection and compass, which bring us lot convenience in our life.

- Pressure
Pressure is used to detect environmental pressure, thus to forecast weather and temperature.

Sensor Box for Android only detects changes. It may not show the correct temperature, proximity, light and pressure values if no changes occur.

For better performances, sensors are usually used together. Check out the live demonstration inside the application! Any feedback the email address below is the best way to get in touch with us.

Are you tired of turning on and off your device when you need it only for a second? Is your lock key hard to reach? Do you have a broken power button?
This app can solve these issues by liberating you from the usage of the power button.

It turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.

HOW TO UNINSTALL?

Use the UNINSTALL button in the app.

HOW IT WORKS

It monitors the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, below a certain angle, it's likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, it turns the screen off because probably you placed the phone into your pocket or onto a table. To keep the battery usage low the program turns on the proximity sensor only when it's really necessary. Moreover, when it turns your screen off and the proximity sensor is covered it puts your phone into deep sleep state to save as much energy as possible.

FREE FEATURES

- Pocket Sensor: Recognizes if your phone is in your pocket.
- Table Sensor: Detects your phone is lying on a table.
- Turn Screen Off by Proximity: activates the proximity sensor before turning the screen off.
- Turn Screen On by Motion: If the screen is off and it's facing up the device can be woken up by any movements, for example by lifting up by hand. Usage of the power button can interferes with this option.
- Keep Screen On by Motion: It keeps the screen on by relying on the small movements you are doing by your hand while holding the phone. If motions are detected while the screen is facing up, it keeps the screen on because it can be suspected that the phone is held and probably you are reading something. If the phone is steady it will turn the screen off normally no matter the position you leave your device. It's especially helpful if your lock key is hard to reach or if the power button is broken.
- Tasker, Llama, Locale supported by plug-in.

IN-APP PURCHASE FEATURES

- Wider range in Table Sensor
- Turn Screen On by Motion Timeout can be set above 15 minutes
- Exclude Apps option: The app pauses itself anytime if selected app is running, it'll resume when you close the app. Useful when playing games etc.
- Widgets, PowerToggles plug-in

VERSIONS: FREE vs. PRO vs. UNLOCKED by IN-APP PURCHASE (recommended)

In the Pro version, there is no 15 minutes limit for turning the screen on by motion and the Table sensor can be set more precisely. Unlocked version has everything what Pro has, plus it has an Exclude App list, a more advanced Delayed lock option and Widgets.

BATTERY USAGE

It should be not significant. I experienced about 6 per cent extra consumption on the test device. However it can be much higher by often using the Turn Screen On by Motion feature. Thus, keep your phone face down if you want to save energy.

IMPORTANT

On some devices (e.g. HTC One) the alarm clock is switched off by the app after it had gone off! Please check if it's the case for you. If, yes, use a third party app, for example: http://goo.gl/Y55zBZ

FAQ

Q: I'm experiencing high battery usage, why?
A: The app should use about 6 percent extra energy per day if you are not using too much the Turn Screen On by Motion feature, for example keeping your phone face down when it's on a table. Moreover, the android en-built battery consumption measurement can show much higher results if it's based on a short period of time.

More FAQ : http://goo.gl/D4BgQ5

COMPLETELY FREE
no ads or in-app purchases

MATERIAL-INSPIRED DESIGN
simple, clean and colourful user interface

OTHER FEATURES:
- get extra information such as range and resolution
- record sensor values to monitor changes over time

SENSORS (availability depends on device):
- Accelerometer
- Geomagnetic Field
- Gravity
- Gyroscope
- Humidity
- Light
- Linear Accelerometer
- Pressure
- Proximity
- Rotation Vector
- Temperature

SPECIAL THANKS TO:
- http://icons8.com/ for the launcher icon
- http://romannurik.github.io/AndroidAssetStudio/
- http://shreyasachar.github.io/AndroidAssetStudio/

The application shows data from 4 sensors Samsung Galaxy S4:
* Ambient air temperature,
* Illuminance,
* Ambient air pressure,
* Ambient relative humidity.

Attention: Works only on Samsung Galaxy S4 !!!

** Developed for the Samsung Galaxy S4 and Samsung Galaxy Note 3, full compatibility is not guaranteed on other models **
functions:
  - Ambient temperature in degrees celsius
  - Percentage of moisture in the air
  - Light intensity
  - Air pressure
  - Height above sea level
- widget with ambient temperature! more coming soon
** The data is read directly from the sensors could then have an error of up to 5-10% (in the worst case) that does not depend on me, but by the sensors, unfortunately I can not do anything about it, to try to reduce the errors Please keep the device on a flat surface for a few seconds, so that the values ​​are optimized **
If you want to report the full compatibility of your device with the application please leave feedback or send me an email, so it will be added to the list, any feedback and comments are very much appreciated, the application aims to be simple and instant, to have at hand all the data from the main sensors of the phone, if there are suggestions, recommendations and requests for additions will be happy to provide (where possible)

1.1 added Google Analytics
1.2 added translation in:
-Italian
-English
-French
-German
-Portoguese
-Russian
-Spanish
1.2.1 fixed an orientation bug
1.3 added icons
1.3.1 bug fix
1.3.2 finally aviable first widget
1.3.3 added share functionality, fixed a bug with translation
1.3.4 fixed russian, widget 2x1
1.3.5 added imperial system ON/OFF menu option
1.3.6 fixed some translation, added version number, added option to change font
1.3.7 added inHg to imperial system
1.4 fixed widget, added notification, new accuracy (0s: Low -15s: Medium -45s: High)
1.4.1 fixed layout
1.4.2 fixed layout for medium font size
1.4.3 fixed a problem with font switch

Get your Screen on! Screebl is an application that controls your screen based on orientation. Never have the screen timeout again while using your phone, and SAVE BATTERY too. It's possible with Screebl!

Screebl, the battery saver keep your screen on wunderkind, works based on a simple observation: we generally hold our phones or tablets in roughly the same positions when we're using them. Screebl uses the sensors in your mobile device to detect how you're holding it, and when your device is within a configurable range, the screen is kept on. Move out of that range, and Screebl releases the lock and the screen is allowed to go off. Using gravity, screen orientation, and other cues, your screen is kept on when it should be, and turned off when you don't need it. It's simple, but it works amazingly well!

How is Screebl a battery saver? Well, it's simple. On most phones, the screen is the single largest consumer of battery power. With Screebl running you can reduce the average amount of time that your screen is on by only keeping it on when you're ACTUALLY using your phone. The amount of savings can vary significantly by device and usage patterns, but it is not uncommon for users to see savings of 20% or more. See our web site for more details.


REVIEWS
★ "Screebl is ingenious..." -- KnowYourMobile.com
★ "Screebl also helps you extend your battery life..." -- AndroidAuthority.com
★ "Screebl is a far more effective way to utilize our screen timeouts..." -- Android Spin.com
★ "Works out of the box..." -- AndroidTap.com
★ "Screebl offers an intelligent solution to the problem of screen control..." -- AndroidGuys.com
★ "Excellent customization..." -- Phandroid.com


PRO-ONLY FEATURES
✓ PocketLock locks your phone when you put it into your pocket, unlocks when you take it out
✓ AppExceptions let you turn Screebl off when selected apps are running in the foreground
✓ Locale Plug-ins and Tasker integration provide automated control and customization of Screebl
✓ Look-and-feel customization lets you make Screebl look the way YOU want
✓ Better detection algorithms
✓ Screen timeout set from Screebl


PERMISSIONS
RECEIVE_BOOT_COMPLETED - Needed to a start Screebl when phone starts up.
INTERNET - Needed to check for new instructional videos and submit debugging information.
WAKE_LOCK - Needed to keep the screen on.
WRITE_SETTINGS - Needed to update system settings related to screen timeouts.
GET_TASKS - Needed to disable Screebl when selected apps are running (AppExclusions).
BILLING - Needed to allow in-app upgrade of Screebl Lite to Pro.
READ_PHONE_STATE - Needed to check phone state (e.g., in-call, speakerphone on, etc.) to provide in-call behavior (e.g., disable Screebl or lock screen on)


KNOWN ISSUES
✓ Some phones do NOT deliver sensor events when the screen is off. Examples include some HTC phones, some Sony Xperia phones, and quite a few Motorola phones. PocketLock may not work properly on these phones. See this link for more info: http://www.saltwebsites.com/2012/android-accelerometers-screen-off
✓ PocketLock sometimes causes battery drain on some devices. The effect of the PocketLock feature varies widely from one device to another. The longer that you have PocketLock monitor for removal from your pocket, the more power used. Most devices see a minor increase in power consumption when using PocketLock (4-8%).
✓ Stillness detection doesn't detect small movements on some devices. A few devices have coarse-grained sensors, and movement is not detected well, causing unwanted stillness timeouts. I am working on a fix for this that will be in an upcoming release. Most phones are fine.
✓ Screebl doesn't start when the phone is powered-on. On some HTC phones the "fastboot" capability can cause problems with Screebl starting at power-on. I've done my best to fix this, but it still is a problem on some HTC devices. Screebl must NOT be moved to SD storage.

Get live readings from all the sensors on your phone or tablet!

- Large display shows real-time sensor values
- Detailed readouts include the raw sensor data
- View the hardware specifications for each sensor, including the component's name, vendor, version, power usage, update rate, and sensitivity
- Use portrait or landscape mode for convenient reading
- No special permissions are required for this app

This app displays ALL sensors available on your phone or tablet, not just the default sensor for each type.

IMPORTANT: The sensors built in to each device vary by manufacturer and model. If your phone or tablet device does not support a particular type of sensor, the sensor will not be listed in this app.

You can use the Sensors app to measure:
- acceleration, including force of gravity (accelerometer)
- gravity (gravimeter)
- rate of rotation (gyroscope)
- ambient light level (photometer)
- magnetic field (compass)
- orientation (position)
- ambient room temperature (thermometer)
- ambient humidity % (hygrometer)
- air pressure (barometer)

List all sensors available on the device along with their current values and a plot to display their changes over time.
Including accelerometer, magnetic field, orientation, temperature, light...

Version 3.5 added support for battery status (temperature, voltage and percentage), sound level and signal strength!

Perfect for showcasing capabilities of your new phone, as well as hardware diagnostics after you have gone through a system update or repair. And it's a must have development tool when you develop applications that uses these sensors.

Want to feel what gestures can do? Here's an application which will let you turn off/on your screen just with a swipe!! Swipe your hand over the proximity sensor (Located near the earpiece on top of the phone).

Features:
• Support for tablets with Light Sensor only (Make sure you set sensor sensitivity to low).
• Tasker integration with quick service start/stop toggle
• Schedule start/stop of service (Save battery power during night)
• Pocket/Flip or Smart Cover Mode: Turns screen OFF when sensor covered and ON when uncovered. (Feature requested by Galaxy Note users)
• Turn Screen On/Off with following gestures:
1) Swipe Once,
2) Swipe Twice,
3) Swipe and Hold,
4) Hold and Swipe and
5) Cover and Hold
• Ignore Apps list: Add the apps/games where you want to disable the service
• Widget: to start and stop the service
• ScreenOff shortcut: to turn off the screen by launching the app.
• Sensor Configuration : Based on your device select the sensor of your choice, or the one that's available and configure their values, as they are different for different devices.
• Enable screen on/off during calls only
• Disable call handling completely
• Battery Saving options:
1) Option to De-Activate sensors after timeout
2) Option to De-Activate sensors if power button is pressed or phone goes idle
• Override power button and screen-on by other apps (Phone is in pocket and you get a call or you accidentally press the power button, screen will remain off)
• Prevent accidental screen on
• Disable accidental lock - in Swipe to Screen Off mode if the sensor is covered for longer than specified duration screen wont turn off
• Vibration on screen On/Off

NOTE:
• App needs SDCard read/write permissions for debug logging support
• If app does not work with flip cover but works with hand, then try
a) Enable No-Recognize Delay and add about 4-5 seconds of delay
b) or try pasting a white piece of paper on the cover where the sensor is located, that will help the detection.

• If Gestures or any other settings (like lock-screen) are not working, please Clear app data from 
Settings -> Application Manager -> Proximity Screen Off Pro -> Clear Data

• If you have problem where screen turns off and on again immediately, try using the option "Alternate Method to screen off".

• Default timeout after screenOn will be system display timeout. can be overridden by "Avoid screen Flickering"

• Removing/Uninstalling the app
- Launch ProximityScreenOff Pro and click Uninstall button
- System Settings , "Locations & Security" or just "Security" , Select Device Administrators and disable the ScreenOff App

• App needs Device Administrator privilege to lock the screen, If you have any questions on permissions used by the app, please send me an email and i will explain you the reason app needs them.

• To enable lock screen - Use option "Locks phone on screenOn" under "All settings"

Reviews:
http://www.youtube.com/watch?v=L0AH469emWc
http://www.youtube.com/watch?v=ON9fMwIbk4M
http://www.youtube.com/watch?v=LvMKMQb99pQ
http://www.spigen.com/samsung-galaxy-s3-case-ultra-flip-series-review-11596.html

For Support: Post you questions on
http://forum.xda-developers.com/showthread.php?p=9884280# or (Send mail on mailto:shailesh.soliwal@gmail.com)

Tested On:
Galaxy Note, S2, S3, Tab, Htc OneX, HD2, Desire HD, Google Nexus,
Motorolla Xoom(Light Sensor), DROID Incredible

(Cover, Smart Cover, Screen, Switch, toggle, tap, power, battery, gesture, lock, smartlock, smart screen off, screen off, screen on, power saver, Galaxy Note, wave, tab, tablet, switch, nexus, s3, sgs, screen on, one touch, tasker)

MarketSpoofer is a critical development tool that every Android developer and hacker should have handy. MarketSpoofer allows you to configure a custom Android Market search by spoofing values that normally would be not available from your device. Configurable values include user login, manufacturer and model, android version, carrier network, and locale. This is extremely useful to determine if the right target users are able to see your app in the Android Market, or to determine what kind of competition your app may see on a given device.

Many devices and carriers are supported but we are adding more all the time. If you would like a specific device or carrier added, please email us at tiger.monster.industries@gmail.com and we will research the requested device as soon as possible.

Note that Google does some fairly advanced carrier-based filtering for some networks and we have not yet reversed engineered all of their filter parameters. Sending us device dumps from the "Device Details" screen helps immensely, as does sending us examples of apps that are known to be filtered.

To see the app in action, try spoofing a Verizon seach for Skype and then an AT&T search for Skype and note the differences.

Our first version supports a few dozen carriers in 13 countries, 26 locales, 14 Android versions, and 7 device manufacturers.

We've got some interesting enhancements planned for MarketSpoofer in the future as well, so watch this space!

Introducing MagiCard, the first of a new wave of high-end, high-tech magic apps for the professional illusionist.

MagiCard uses a set of simple-to-learn techniques to allow the magician, you, to produce a card of your choice at any time. The magic trick can be handed to a spectator to examine as well, and resetting to perform the trick again is practically instantaneous. All handling and techniques are discussed inside the Help menu of the app.

During the development of MagiCard we performed the trick hundreds, perhaps thousands of times. Not a single mark ever discovered the secret. Combined with some patter about the amazing capabilities of the modern mobile device, you will completely blow away your spectators.

MagiCard is not cheap, nor is it for everyone. It is a highly polished app primarily targeted at professional and aspiring illusionists. Please send feedback on handling, mechanisms, feature requests, tweaks, etc. to tiger.monster.industries@gmail.com. We are very interested in your thoughts and are excited to bring real magic to the mobile device world. If anyone is interested in providing language translations of MagiCard, please drop us a note.

MagiCard is the first Android platform release from Tiger Monster Industries. We hope you enjoy performing MagiCard for your audiences.

Wingman Card Magic uses the oldest trick in the book to allow the magician, you, to produce a card of your choice at any time - an accomplice. Wingman Card Magic and Wingman Card Accomplice are a pair of apps that you deploy on 2 Android devices that have been paired over Bluetooth. The illusionist asks the audience to call out, draw, sign, or otherwise indicate a card, and the accomplice simply chooses it surreptitiously in the accomplice app.

NEW FEATURES! Card flips are now animated! New cards added - black and red Jokers, and a special U MAD card to really confuse your audience.

Wingman got its name from the common practice of bringing a buddy to the table when trying to make new romantic connections to help make a great first impression. It is the buddy's job to make the performer look good. Wingman was actually tested in exactly those harsh environments and produced great results - interested strangers who wanted to spend more time with us!

Important features:
- You must pair and connect the 2 devices in advance. Pairing lasts forever, but connection must be done every time the trick is launched.
- The pairing can be done in either direction. The best way is to choose "Make discoverable" from the option menu on one device, then on the other device choose "Connect a device". Scan for the other device and select it, follow and instructions on-screen and the devices will be paired.
- When ready to perform or rehearse the trick, from either device choose "Connect a device". The paired device will already be in the list. Select it, and the devices will be connected.
- Wingman Card Magic indicates that it is connected by adding a "!" after its name.
- Wingman Card Accomplice indicates that it is connected by updating its status bar with the connected device name.

Wingman Card Magic is a clean, simple magic app that works equally well for professional and aspiring illusionists as it does for amateurs looking for a great conversation-starter. Please send feedback on handling, mechanisms, feature requests, tweaks, etc. to tiger.monster.industries@gmail.com. We are very interested in your thoughts and are excited to bring real magic to the mobile device world. If anyone is interested in providing language translations of Wingman Card Magic, please drop us a note.

Make sure to update your Wingman Card Accomplice app to 2.0 to match!

Wingman Card Magic uses the oldest trick in the book to allow the magician, you, to produce a card of your choice at any time - an accomplice. Wingman Card Magic and Wingman Card Accomplice are a pair of apps that you deploy on 2 Android devices that have been paired over Bluetooth. The illusionist asks the audience to call out, draw, sign, or otherwise indicate a card, and the accomplice simply chooses it surreptitiously in the accomplice app.

NOTE: THIS IS THE ACCOMPLICE APP. The main Wingman Card Magic 2.0 app is required to perform the illusion with the help of this app.

NEW FEATURES! Card flips are now animated! New cards added - black and red Jokers, and a special U MAD card to really confuse your audience.

Wingman got its name from the common practice of bringing a buddy to the table when trying to make new romantic connections to help make a great first impression. It is the buddy's job to make the performer look good. Wingman was actually tested in exactly those harsh environments and produced great results - interested strangers who wanted to spend more time with us!

Important features:
- You must pair and connect the 2 devices in advance. Pairing lasts forever, but connection must be done every time the trick is launched.
- The pairing can be done in either direction. The best way is to choose "Make discoverable" from the option menu on one device, then on the other device choose "Connect a device". Scan for the other device and select it, follow and instructions on-screen and the devices will be paired.
- When ready to perform or rehearse the trick, from either device choose "Connect a device". The paired device will already be in the list. Select it, and the devices will be connected.
- Wingman Card Magic indicates that it is connected by adding a "!" after its name.
- Wingman Card Accomplice indicates that it is connected by updating its status bar with the connected device name.

Wingman Card Magic is a clean, simple magic app that works equally well for professional and aspiring illusionists as it does for amateurs looking for a great conversation-starter. Please send feedback on handling, mechanisms, feature requests, tweaks, etc. to tiger.monster.industries@gmail.com. We are very interested in your thoughts and are excited to bring real magic to the mobile device world. If anyone is interested in providing language translations of Wingman Card Magic, please drop us a note.