*** WORKS ON KERNELS WITH BOEFFLA SOUND SUPPORT***
Welcome to Boeffla Sound Control - making audio tuning a breeze
With this app, the amazing Boeffla Sound interface becomes easy and fast to tune up, with a cool and easy-to-use UI.
What can you tune:
- DAC Direct
- DAC Oversampling
- FLL Tuning
- Speaker Tuning
- Stereo Expansion
- Mono Downmix
- Headphones Volume
- Speaker Volume
- Microphone Gains
- Hardware Equalizer (with Graphical Equalizer)
- Volume Buttons Mapping
- Privacy Mode
and many more...
Driver written by: AndiP
App written by: simone201
For more infos and news, please contact the developer of both apps and drivers. For bugs reporting, please report to the app developer directly.
Thanks for downloading, and enjoy!!
Don't forget to donate to both AndiP and simone201 ;)
Thanks in advance!
Installed a new ROM? Or does your battery seem to be gone and drains very quickly? There's an easy help for this!
Battery Calibration is a simple app that formats the batterystats.bin file located in your /system storage.
This app removes the old values. After some time, your system will generate new, updated values.
This process significantly raises the battery life. Also, you can calibrate your battery basically anytime, whenever
you feel like your battery life needs to improve.
STUFF YOU MIGHT WANT TO READ:
Some users may find this app a bit confusing. Even if you're not rooted, the pop-up saying "you've successfully calibrated your battery" will still pop-up. THIS WON'T WORK unless you ARE ROOTED. I should've probably coded this a bit better (sorry) because it might be a bit confusing.
If you see a toast message saying there was something wrong with the calibration, YOU HAVEN'T CALIBRATED YOUR BATTERY. So, if you're rooted, there's nothing you could be aware of. This will not brick your device, trust me.
Thank you for your support.
This app has no service or any background execution. It generates a dynamic UI using the config xml provided by "/res/uci.sh config" command and calls the actions defined by the same xml upon user actions.
The same application can be used to configure different kernels if the kernel has support for the interface. An example implementation can be found in the initramfs of Siyah Kernel for S2 ( http://github.com/gokhanmoral/initramfs3 ).
The source code of this app can be found in http://github.com/gokhanmoral/STweaks
- start computer (WakeOnLan)
- new: remote control your computer: shutdown, reboot, screenshot etc.
- call monitor displays calls immediately
- show and edit phone book
- switch on/off WiFi and WiFi guest access
- new: WPS connect new WiFi devices easy and fast
- restart and reset FRITZ!Box
- play voicemail messages
- open and send fax messages
- switch Smart Home devices
- new: display device temperature
- support multiple FRITZ!Boxes
- 18 widgets and shortcuts for nearly all features
- callthrough, dial helper and skype integration
User about BoxToGo Pro:
"BoxToGo is the leading and most comprehensive FRITZ!Box-App and has much more features than all AVM FRITZ!Apps."
Setup wizard lets you easily setup BoxToGo and supports MyFRITZ!, DynDns and free "BoxToGo DynDns".
The connection between BoxToGo and your FRITZ! Box is protected by SSL and by certificate check against man-in-the-middle attacks.
Save telephone charges or even make free phone calls. BoxToGo connects phone calls to your FRITZ!Box. Two lines are necessary, like ISDN or Voice over IP. Use flatrates which are usually available only from home. You can set whether the callee see your home number instead of your mobile phone. Note that these are normal calls via the mobile network, not over the Internet. Callthroug is not internet telephony.
Voicemail and fax messages:
These messages can be displayed in calls list and be opened as wav or pdf file with firmware from xx.05.05. If you use a newer FRITZ!Box model you can send faxes with images attached.
AVM FRITZ!Box 3270, 3370, 3490, 4080, 6320, 6340, 6360, 6810, 6840, 6842, 7112, 7141, 7170, 7240, 7270, 7320, 7330, 7340, 7360, 7362, 7390, 7490 or 7570 with firmware from xx.04.87.
Support and money back:
Please contact me if you have problems or questions. If BoxToGo should still not work, you'll get your money back!
Visit http://www.boxtogo.de for FAQs, forum and videos or contact me directly: firstname.lastname@example.org or +49 (0) 30 70206375
gokhanmoral got mad and you gotta deal with it :D
Profiles MIGHT work or might not, I cant do anything about it.
Still if you want to place a donation - you are welcome to.
This does NOT install a NEW application icon!
This is a feature unlock key for ExTweaks application.
Currently it unlocks (ICS+)
+ profile switching within ExTweaks
+ full profile management (add/remove/rename)
+ profile switching widget
Still, if You are on GB and just want to support me by donating - You are welcome to do so :)
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102 and iBKS105 with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.3 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102 and iBKS105 with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://www.ibeacon.accent-systems.com/
Settings you can configure
• Brightness - auto/manual and dimming for both
• Screen orientation - landscape/portrait/sensor based orientations
• Screen timeout - time/never
• Media volume
• Mobile data - on/off
• Wi-Fi - on/off
• Bluetooth - on/off
• Location - off/networks/GPS/GPS and networks
Location and language settings won't work on all devices! Language settings work on Androids older than 4.2, but location settings always need rooted device or you to grant permissions to AppConfig manually.
• Android 4.1.1 or newer ROOTED
If AppConfig recognizes that you have root permissions and your package manager supports granting permissions, it will show menu item for requesting permissions. Click on it and when your system asks grant root permissions and settings will appear in AppConfig.
• Android 4.1.1 or newer without root
If your device isn't rooted but package manager supports granting permissions you need to manually grant permissions to AppConfig with adb:
pm grant fi.aarosoft.appconfig.free android.permission.CHANGE_CONFIGURATION
pm grant fi.aarosoft.appconfig.free android.permission.WRITE_SECURE_SETTINGS
First one is for language settings and second one is for location settings.
• Android older than 4.1.1
On older devices if you copy AppConfig as system app and reboot, then it can change location settings. I take no responsibility if you brick your device in the process. You have been warned.
Thank you for translators:
German - Oswald Boscovic
Spanish - Jano Lucero, Omar S. Marcial Hernandez
Exported file is named "romconfig-generated.xml" and is located on the root of your internal storage/sdcard
renaming this file to "romconfig.xml" and including it in the root of your ROM recovery ZIP will trigger the menu when the zip is selected to be installed through ROM Customizer
each option when triggered will create a blank file with the name configured as "key" in the configurator in the folder configured as "path" starting from the root of your internal/sdcard storage
** REQUIRES NEAK KERNEL **
** ONLY FOR S3 and NOTE 2 **
uNEAK Engine is a unique tool to configure your device powered by N.E.A.K. Kernel.
It features many options like:
- NEAK Smart Response
- NEAK Options
- Voltage Control
- GPU Control
- Current Control
- Wolfson Audio Control
- OTA Updater for NEAK
other options are available via the PRO KEY, on the Play Store.
For more infos, contact the developer on XDA (simone201) or via mail here.
A system suite to monitor and record all activities, backup and restore *any* applications, extended task killer, CPU SD and memory controls, logcat reader, terminal emulator, widgets and notifications, all in one highly optimized app!
♦♦ Feature set (some require root access or pro version) ♦♦
In-app purchase can be made to remove ads
► Application manager *1
◊ Backup and verify app apk/data
◊ System app uninstaller
◊ Share and backup apps to e-mail, DropBox, GDrive, etc...
◊ Move any apps to user, system, SD
◊ Freeze/unfreeze apps, and control app startup and events
◊ Zip align, clear cache, wipe dalvik-cache, fix permissions and optimize databases
► Task manager
◊ Check CPU, network and memory usage
◊ Kill (default) or force-stop *1 any apps or kernel processes
◊ Automatic task killer, memory booster, memory cleaner
► System Control *1
◊ CPU governor, frequency, voltage, GPU controls, thermal and MPDecision controls
◊ Build.prop and sysctl editor (basic and advanced mode)
◊ Boost, analyze and benchmark SD cards
◊ Android memory manager, memory cleaner, f-sync control
◊ Safe: auto-restore CPU settings on boot-loop
► System Monitoring
◊ All Android applications or all processes, CPU, memory
► Status bar notifications
◊ CPU, memory, sd, optionally with graphics in drop-down
► Highly Configurable Widgets
◊ Resizable gauge widget
◊ 1x1 and 2x1 (PRO ONLY) text widgets
◊ 2x1-5x2 graphic widgets (PRO ONLY)
► Terminal Emulator
◊ Command history
◊ Share commands and outputs
► System Logs Reader *1
◊ Logcat or kernel messages
◊ Advanced filtering and search
and much more that meets the eye ☺
*1 Requires root and kernel support for full feature
Caution: Rooting and root brushing your mobile device can compromise its performance or cause malfunctions.
ONLY FOR NEXUS 4 AND 5
PLEASE DO NOT RATE POORLY, READ FULL DESCRIPTION.
This app allows you to tune the vibration of your device at your own taste. As many of you have noticed, devices like Nexus 4 or Galaxy Nexus have a very quiet and discrete vibration, this app will allow you to turn it up a noch and personalize the feedback your device gives you.
Not every device is supported, the APP itself will detect and let you know if you can tune the vibration or not.
THIS APP REQUIRES:
Android 4.0.0 or newer
Root access -if not, the app can not change the default vibration-
A compatible device
(Mostly Nexus 4 and 5 devices, other may or may not let you set the vibration intensity, since this APP is developed to work with the vibration units that LG are using right now, if your phone DOES NOT HAVE ONE OF THOSE, will NOT work)
This utility is for ScreenBeam Pro, ScreenBeam Mini, and ScreenBeam Mini2 receivers only.
It is not compatible with ScreenBeam Education Editions and ScreenBeam Business Edition receivers.
Detects and downloads the latest firmware for Actiontec ScreenBeam products.
Provides system configurations for Actiontec ScreenBeam products.
Provides various power management options for Actiontec ScreenBeam receivers .
1. Supports updating the background image for ScreenBeam Mini2/Pro
2. Supports changing the image and text for receiver's screensaver.
3. Changes the time range (5 to 9999 seconds) for HDMI off timer.
Please read this information carefully before purchasing this app:
*** Please note, this app helps only to receive your personal donation key and you still need the Boeffla-Config V2 app to be installed separately as well !! (get it from http://www.boeffla-kernel.de) ***
Please purchase this donation app if you want to support my work on my various Boeffla-Kernels!
Important note: The primary reason for the donation app is to provide people, that are willing to donate, an alternative channel to PayPal. Hence, the additional functions of the Boeffla-Config V2 donation version will never be major but just some functions to make life more comfortable. Boeffla-Config V2 basic functionaliy is and will always be free.
If you have an issue with the app, please report directly to email@example.com instead of giving bad ratings.
* No permissions required