!!! Please read... YOU NEED AN EXTERNAL BLUETOOTH GPS HARDWARE DEVICE TO GET IT WORKS !!!
The app requires GGA, GSA, GSV and RMC (or ZDA+VTG) to works properly.
If you leave comments, whether works or not, you are welcome to state also which hardware devices combination you are using. This may help debugging and also serve as a reference for other users.
### I always receive questions about how to use this app to connect their Notebook or PC, Mac, or tethering another Android ...etc. I have to clarify that the purpose of this app is to connect the Android device with an external Bluetooth GPS device, in order to "replace" the android's internal GPS locations.
If you dont understand what the purpose of the app, please don't dl.
Please install at your own risk.
### Please understand that the app frontend is just a frontend, mainly for controlling and configuration purpose, and providing some handy info. so don't expect it has many functions, shows every details and in any desired format...etc.
**** Please first enable Allow Mock Locations in Setting ****
* can't guarantee all device+apps work, pls email me details :)
Now you can start/stop the service from other apps by sending the service or broadcast Intent :
Start - googoo.android.btgps.action.SERVICE_START
Stop - googoo.android.btgps.action.SERVICE_STOP
Toggle - googoo.android.btgps.action.SERIVCE_TOGGLE
* Note: You should first make sure you setup all the preferences and you can start the service correctly through the GUI frontend.
* try the workarounds (in preference) if failed to connect (eg, service discovery fail, connection refused)
Please report error or send me logcat if you got FC or any problems, with screen cap of any error messages, nmea log.
There are thousands combinations of [android version x mobile hardware x bluetooth gps hardware ]. Sorry that it is impossible to provide support on a particular hardware model. Even a GPS-A works with Mobile-A, but GPS-A may not work with Mobile-B, but Mobile-B works with GPS-B. However, after upgraded the android version, this combination does not work anymore, but the other combination works again. I always got such reports. I don't have any those hardwares, and even for some of them, I never heard before and cannot google any information about them. Hope you understand.
some android 4.2.x may have problem with the bluetooth stack.
Updated to Version 2 with all the features users have been asking for.
☆GPS and Network location smart-fusion
☆Multiple device support - pair up to 7 devices simultaneously
☆Fully adjustable output rate
☆NMEA 0183 v3.01
☆Widget toggle button
☆Start on Boot and background service for Android 2.3+
☆Atmospheric Pressure (XDR/MMB)
☆Video tutorials to get you up and running fast
All existing paid users can upgrade, completely free. Make sure to update your license app.
Free Mode: 10 minute limit per run, reconnect unlimited times.
Paid Mode: No limits
Trouble getting started? Real human support staff is available to assist you - send us an email, watch the tutorials.
Minimum Requirements: Android 2.3 or newer
Tested with HTC One, Google Nexus 4, Samsung Galaxy SII, Captivate
*Brand names and trademarks are property of their respective owners. We are not affiliated nor endorsed by any holder mentioned.
"Mock Locations" have to be enabled.
Please note that this will only work if your GPS application is able to select the provider. Most will select the default "internal" and they won't be able to use this tool.
My own "Turbo GPS" supports choosing the provider.
NOTICE!: Creating SPP port may fail with Widcomm stack.
NOTICE2!:Widget simulates NMEA while GPS is not fixed yet. This simulation is based on Cell Tower information and may be coarse.
***How to use***
1. Run app and press START
2. Pair your phone with another device (ex. PC or tablet)
3. Find Serial port named GPS2BT2 in the list of services provided by your phone. Enable it.
4. Connect to this port with desired application on client device.
This tool can scan for surrounding visible bluetooth devices. It shows the device type, supported services and the signal strength. It can also be used to locate a device based on the signal strength. Devices like Headsets are usually only visible during the pairing phase. Thus you might not be able to track your lost headset even if it is still connected.
*** PLEASE NOTE: Devices with Android below 4.3 can not be supported by the new features. You will receive the last working version before the changes. Any other device with Android 4.3 or higher will receive the new features like new UI and LE scanning. I am sorry for any inconvenience caused by the last updates. ***
- Support for Bluetooth LE scanning (including LE attributes and characterstics)
- Database support. All scanned devices are now stored in a database and can be reviewed. Stored data includes the time a device is first seen and when it was last seen.
- List currently paired devices
- Scan for visible devices
- Shows Device Name, BDADDR (like MAC), Class of Device, Vendor and Signal Strength
- Query SDP services from devices
- Query Bluetooth LE attributes and characteristics
- Pair / Unpair to devices
The Database can be exported to a csv file on the external storage. Filename is: btcrawler-.csv
The csv has the following order: Device Name, Device Address, Class of Device, Pairing Status, Last Signal Strength, First Time Seen, Last Time Seen, Vendor.
The Database can also be wiped. For both functions hit the menu button.
Over the time I will add more features as I find more ways to mangle the API a bit more.
(People call btCrawler often also: BluetoothScanner, Bluetooth Scanner, Bluetooth Sniffer, BluetoothSniffer, Bluetooth Wardriving, Bluetooth Diagnostic, Bluetooth Tool)
Act responsible like a hacker, not like a cracker or skiddie!
Graphics from http://www.clker.com/ Mainly from OCAL, thanks!
★ More than 200 million users' choice.
★ One of 10 Finalists in the CES2015 Mobile Apps Showdown.
★ Top Downloaded Android transfer tool on Google Play in India.
►No network restriction
Connect friends without external Wi-Fi or cellular data network. Share whenever & wherever!
►Extremely fast transferring speed
The best transferring speed is up to 20M/s, which is 200 times faster than Bluetooth speed. Just forget about NFC, use our super cool SHAREit !
Cross-platform sharing for Mobile Phone & Tablet PC(iPad) & PC, Android & iOS & Windows Phone & Windows XP/7/8.
Photos, videos, contacts, apps and everything in SD card, share whatever you like with your friends!
►Simple & Easy
Select contents → Connect with friends → Transmission completed!
►CLONEit (Phone replicate)
You can easily transfer and back up Contacts, Call logs, SMS messages, MMS messages, Apps, all types of files in SD card and even System settings from your old phone to new one.
1. Play To:
With SHAREit, you can connect to PC wirelessly and view mobile photos on computer screen!
2. PPT Control:
SHAREit could control PPT directly. Presentation is not a problem anymore!
3. Remote View:
While connected to PC, you can view any folder and file on PC. Transfer pictures? Play music? Piece of cake! Just click them on your phone.
4. Backup Photos:
Too many photos in your phone? Need to backup them to your PC? SHAREit helps you backup them once and for all.
【LIKE US and STAY CONNECTED】
Just feel free to contact us at email@example.com
Just launch this app and it will quickly switch your Bluetooth mode and close itself.
Save battery life & block hackers.
If you already have Bluetooth on, launching this app will switch it off. If off, launching this app turns it on.
If you like this app, please like GPS Test on Facebook: -
GPS Test has five screens full of information: -
1) GPS signal (SNR) bar chart, showing the signal strength for each satellite, as well as the accuracy and status of the GPS.
2) Satellite positions in the sky (skyview), shown on a rotating compass.
3) Your current location on the earth shown as text and on a world map. The current position of the sun and the day/night transition curve is also shown.
4) Your current speed, heading and altitude shown as text.
5) The current time read from the GPS and the local time in your current timezone, as well as the sunrise and sunset times at your location.
Coordinate Grids supported by GPS Test:-
OSGB, UTM, MGRS, USNG, CH1903, Maidenhead.
Datums supported by GPS Test:-
WGS84, NAD83, NAD27, ED50, AGD66, AGD84, SAD69
If you like this app please look at ***GPS TEST PLUS***.
* Simple Navigation.
* Location Sharing (email, sms, twitter etc)
* Dials (Altimeter, Speedo and Compass)
* 7 segment LED font
* Dot Matrix font
* HUD mode
Works on Honeycomb O/S and large screen tablets.
GPS Test blog - http://gpstestapp.blogspot.com/
INTERNET permissions are only required for analytics and app wall in the AppBrain library. The app will work fine without a WiFi or data conection.
This supports the earthping.com project - crowdsourced Bluetooth database. Users are also reporting usage to find their lost Bluetooth devices.
Scan data can be downloaded via email in JSON format. Also, this version uploads the found devices to a web database, which can be turned off in menu --> settings. Bluetooth 4.0 devices will be able to scan in Classic or Low Energy mode. Devices without Bluetooth 4.0 can scan in Classic mode only.
This is part of a research project into the extent that Bluetooth devices are used in the buildout of the Internet-of-things. Currently this supports Bluetooth Classic and 4.0 (Bluetooth Low Energy - BLE). The latest Nexus phones & tablets support BLE and Jelly Bean 4.3.
This app is oriented toward those curious about the extent of the Bluetooth devices in and around their neighborhood - drive through your neighborhood while scanning for Bluetooth devices and you'll see sensors, firetucks, freeway monitors, car brands, laptops, phones, TV set-top boxes, etc.
Any feedback would be greatly appreciated. That includes bugs, feature requests, sending of some scan data sets would be appreciated (firstname.lastname@example.org) and/or any comments about interesting Bluetooth devices you are seeing.
Many Thanks, John
Bluetooth Detection is an add-on app for Tasker or Locale that lets you set conditions based on connected or nearby Bluetooth devices.
Please note: this is a plug-in. You MUST have either Locale or Tasker installed for this to work. It is built as a plug-in for either of these, and will never function on its own. If you don't understand what Locale or Tasker are, then please do not install this plug-in.
When you use Bluetooth Detection within Tasker or Locale, you can create a profile that lets you act upon Bluetooth connections or nearby devices. For example, you can use Locale to start playing music when a connection is made to your car's Bluetooth audio profile, or enable work mode when near your work laptop.
Tasker users might ask, "So what makes this different from the native functionality in Tasker?" The answer is mainly "ease of use" - not everyone wants to type in a MAC ID :). But there are also some features that I think are unique. Some examples: you can select class of device, so that (for instance) any A2DP connection triggers a task, or you can specify that you only care about a connection to your car's BT when it's the Hands-Free profile. You can also set a delay on unsetting the condition, and all of this is done in a very user-friendly interface. And you also get a local Tasker Variable with the name of the last connected device.
Note for Tasker Users: Once installed, you can find Bluetooth Detection by going to Profiles, and adding a "State" condition. Within the pop-up that appears, you will see a button labeled "Plugin." Tap that, and you will see "Bluetooth Detection."
- LG GW620
- LG Optimus One
- Sony Ericsson Xpheria Neo V
Share your apps with everyone! With Bluetooth App Sender you'll be able to send your installed apps through bluetooth, but also through email if you wish, using native bluetooth file sender or whatever you have installed.
Im not perfect, if app does it wrong, please write me and i'll try to fix it.
This app is specially recomend by Fitbit users. There is a Pro version available without ads and new features as one device selection.
IMPORTANT NOTE: To work properly it is necessary to turn on the Bluetooth in discovery mode. PAIRED DEVICES AS HEADSETS WILL NOT BE FOUND.
Be constructive please :), if this app does not work on your device, instead of negative rating, send me a email with the device model and problem description in order to solve it.
By Bluetooth App Sender APK you can:
- See all installed app in a list with a details about each app in simple way.
- Send any app in your phone to other phone by more than one way, you can use Bluetooth, Email or any sending method supported in your device.
- Share any application installed in your phone to any other phone using Bluetooth, Email , Facebook and other social networks.
- See details about any installed app such as permission that this app has on your system.
- You have the ability to uninstall any unwanted app just in one click.
- You can run any application from the list to preview it.
Smart Connect also helps you set up and manage smart accessories such as SmartWatch, SmartTags, and app-enabled Bluetooth® headsets from Sony. When you connect your smart accessory, Smart Connect identifies it and downloads any required app for that specific device. It will also find any app extensions available for that accessory.
Previously connected devices are listed within Smart Connect to give you easy access to information and device options.
Smart Connect replaces LiveWare™ manager from Android 4.0
You can also choose to speak the notifications always or only via A2DP (useful e.g. when you are riding your car with a bluetooth enabled car radio).