Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
This application, Root Checker (Basic), will allow the user to confirm they have proper root (superuser) access configured and operational.
*Feel free to email me with any questions. I always reply!*
This application provides even the newest Android user with a simple method to check their device for root (administrator or superuser) access. The application provides a very simple user interface that easily notifies the user whether or not they have properly setup root access.
This application will test the device for root access using a very simple, quick, and reliable method. The su binary is the most common binary used on Android devices to grant and manage root access. Root Checker will check and verify that the su binary is located in a standard location on the device. In addition, Root Checker will verify that the su binary is properly functioning in granting root access.
Many times users experience issues along the path of installing, configuring, and gaining root access. For some users the process can seem complex while for others the process can seem simple. Regardless of the user's technical skill set, Root Checker, will quickly and correctly verify whether or not root access is 100% functioning. The process of confirming root access is sometimes known by other terms such as, gaining superuser access or gaining administrator access. Root Checker covers all these terms as they relate to one core function, being able to execute commands through the su binary with root access.
If the Superuser management applications (SuperSU, etc.) are installed and working properly, these applications will prompt the user to accept or deny the root access request from Root Checker. Accepting the request will allow Root Checker to check for root access. Denying the request will result in Root Checker reporting no root access.
Please don't leave negative feedback about a concern, bug or issue! Instead, please email me, tweet me, contact me on my web site - https://joeykrim.com/contact, IRC, or on the forums (XDA, RootzWiki, SDX, etc.) with your feedback, suggestions and comments!
I do my best to assist as many people as possible and appreciate all the support that has made this application successful! Thank you!
!!! SuperSU requires a rooted device !!!
SuperSU allows for advanced management of Superuser access rights for all the apps on your device that need root. SuperSU has been built from the ground up to counter a number of problems with other Superuser access management tools.
- Superuser access prompt
- Superuser access logging
- Superuser access notifications
- Per-app notification configuration
- Temporary unroot
- Deep process detection (no more unknowns)
- Works in recovery (no more segfaulting)
- Works when Android isn't properly booted
- Works with non-standard shell locations
- Always runs in ghost mode
- Wake on prompt
- Convert to /system app
- Complete unroot
- Backup script to survive CyanogenMod nightlies
- Icon selectable from 5 options + invisible
- Theme selectable from 4 options
- Launch from dialer: *#*#1234#*#* or *#*#7873778#*#* (*#*#SUPERSU#*#*)
NOTE: Not all phones take both codes. On some phones you need to use single *# instead of double *#*#
The Pro version additionally offers:
- OTA survival mode (no guarantees)
- Full color-coded command content logging (input/output/error)
- Per-app logging configuration
- Per-app user override
- Grant/deny root to an app for a set amount of time
- PIN protection
- Per-app PIN protection
- Adjust auto-deny countdown
The discussion and support thread can be found on XDA-Developers here:
This is meant to replace Superuser (if installed), you use either one or the other. You cannot combine them. Statements that this breaks Superuser are therefore completely nonsensical.
NOTICE: A SPECIAL PROCEDURE IS NEEDED FOR UNINSTALLATION. IF YOU DO NOT LIKE THE APP, DO *NOT* JUST UNINSTALL IT, YOU *WILL* LOSE ROOT.
Superuser access management runs through a so called "su binary". There can be only one of these at a time. So if you install SuperSU, your previous superuser access management solution will no longer operate. So if you want to switch back: (1) Open that application, and search for an option for it to install/update/replace the "su binary". (2) Confirm root-using apps are using the superuser solution you want. (3) Uninstall SuperSU.
Want to help translate SuperSU ? See http://www.getlocalization.com/supersu/ !
These are completely optional and more like donations. They do not unlock any functionality.
* Flash your recovery to the latest and greatest ClockworkMod recovery.
* Manage your ROMs via a handy UI.
* Organize and perform backups and restores from within Android!
* Install ROMs from your SD card.
* Install your favorite ROMs over the air!
* Incremental update zips (save your data plan!)
* Premium ROMs
* Receive notifications for when your ROM is updated!
* Automatic backups
* Install Queue
* Web Connect
* Backup Download Server lets you easily transfer backups as flashable zips to your computer.
Do you prefer using only recovery manually? Check out the Touch Recovery in app purchase, for the most advanced recovery available!
Why does ROM Manager ask for account permissions?
Web Connect only needs to access your Google account to connect it to your google account. It can't access any private data or passwords.
ClockworkMod Touch Recovery:
ClockworkMod Touch recovery (and recovery) is work that needs to put in for every new device that is released by a manufacturer.
If work on ROM Manager ceased completely, all the premium features would continue working without issue. However, new recoveries do not port and build themselves. Without ClockworkMod Touch being a per device purchase, there is no way to recoup recurring server costs and labor. Keeping ROM Manager free and operational costs tens of thousands of dollars a year, and that does not include engineering costs.
Your support is appreciated.
Droid users: Stuck at the "M" logo? Flash an alternate recovery and flash back to ClockworkMod.
HTC Users: Flash recovery not working? Try fastbooting a recovery on.
Droid X/2/Pro Users: You must run the Bootstrap application first to use ROM Manager.
Samsung users: You must flash a Clockwork compatible kernel first (see XDA forums)
IF YOU ARE HAVING LICENSE ISSUES, MAKE SURE YOU HAVE THE LATEST VERSION OF FREE (4.0+) AND THE LATEST LICENSE (1.0.8+) INSTALLED!
This app requires that you already have root, or a custom recovery image to work.
Note: App and binary will have different versions. The app is updated more often than the binary is.
This app cannot be uninstalled if it was installed with your ROM or root. If there is no uninstall option, it's because you placed it in /system/app, not me. It is impossible for an app to be installed in /system/app by the Play store. In fact, the entire /system partition is read only at runtime. The only way for an app to be placed in /system/app is via a rooting process (which usually installs Superuser), or by remounting the system partition as read/write and manually putting it there.
Permissions requested are for:
Internet - updating the binary
External storage - backup/restore for elite users
NFC - creating an allow tag for elite users
Boot completed - fix database on boot
Support request emails that simply say "Doesn't work" or something to that effect are automatically deleted by our stupidity filter and will not be answered.
Note: uninstall system app need root permission, and we do not provide root method.
Compare to other similar products, System app remover:
• Safe, we filter out all apps that may cause unstable after uninstalled, and had tested hundreds of devices, so you can use it safely, but we can not make sure 100% safe because of manufacturers may customized too much, also, we backup all app you uninstalled automatic, so you can restore them in Recycle Bin whenever you need;
• Clear, we classify all system app as [Could remove], [Should keep], [Key module], so you can choose what app to uninstall clearly;
• Easy, we provide you a way to uninstall multi app in one time, make you easy to go;
• Small, we release all memory allocated while app exit, and may the smallest app;
[move to sdcard]
If we granted root permission, we can move multi-app in one click, and can move almost all apps installed.
• Move apps to SD card
• Move apps to phone internal storage
• Sort app by movable, name, size and time
• User can custom [Install time] [Package name] [Apk path] to show in list
• Show app details: size, install time, package, apk path.
• Open app
• Search in market
• Search in website by apk name, package name, app name
• Scan all APKs in SD card
• Install APK
• Search APK
• Batch rename APK's filename
• Batch Move APKs to directory
• Search and delete all duplicate APKs in one click
• User can custom [time] [Package name] [Apk path] to show in list
• Show apk details: size, package, apk path.
• Search in market
• Search in website by apk name, package name, app name
• Uninstall multi-app in one click.
• Backup & restore apps.
• Scan all apks in sdcard.
• Search apps in local, in market and in website.
• User can custom [Install time] [Package name] [Apk path] to show in list;
• User app backup directory can be configured in settings;
• Show app details: size, install time, package, apk path.
• Open app
• Search in market
• Search in website by apk name, package name, app name
If the Ads annoy you, you can remove it from settings, just one click.
We never say we are the best, but we will try our best to make it better, any comments or suggestions will be nice, please let me know via feedback in our app.
can allso be used with non Rooted devices.
Get access to all your files and folders.
- Support for 30 languages
- Complete Android File manager
- Easy & Powerful
- Gestures support
- Root Support -Explore root folders
- Apps backup - Backup apps to your sd card
- Task Killer - View & kill processes to free memory
And many more options.
*Full root access for copy and delete.
*Zip and compress files and folders.
*Access media and more.
*included an advanced task killer.
*complete search system.
The free version is Ad supported with descret ads.
If you like this Explorer please rate and comment,
THIS APPLICATION DOES NOT ROOT YOUR DEVICE!!!
This app gives you the root information and build information.
-Whether su is installed
-Location of su executable
-Version of su
-Whether toolbox/busybox is installed
-Location of toolbox/busybox
-Version of installed busybox
-Whether the app has root access
If you want to Root your device you can easily find root guides by searching in google.com. And also you can check forums on xda-developers.com
Before leaving negative feedback please contact us via email and we'll do our best to solve your issues. You can also contact us for feature requests.
Special thanks to developers of following projects:
TAGS: root check, root checker , android root, verify root, check root, Superuser, administrator, root access, busybox check, su checker, su check, test root, root tester
rooting, superuser, sudo checker, user access, uid, gid, sh, admin, execute, developer, shell, bash
!!! REQUIRES ROOT !!!
Various Nexus and "stock Android" devices do not automatically "mount" mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.
StickMount is known to work on many devices, but is built *only* with *Nexus* devices in mind.
Once StickMount is installed and you connect a USB stick with a "USB host / OTG cable", the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.
If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.
Mass storage devices are mounted to "/sdcard/usbStorage/xxxx/".
----- (Pro) Kill apps preventing unmount -----
Sometimes an app has a file in use located on the USB device, and won't let go of it. This can prevent StickMount from unmounting the USB device. It will seem like the device stays connected (this is harmless). StickMount Pro provides an option that attempts to kill (terminate) all the apps that are preventing the unmount from succeeding.
----- (Pro) Media scan -----
StickMount Pro supports triggering the media scanner on each (un)mount action. This will automatically make the files on your USB device available in apps like Gallery and Music. Please note that the media scanner is not a visible process on all Android devices - it might actually work silently in the background without any visual cues. It may take a minute for your files to show up, so don't panic if they don't show immediately.
Even if you have this option enabled, you can prevent folders from being scanned by placing an empty file called ".nomedia" in that folder. If you put it in the root of the USB device, the entire device will not be scanned.
----- (Pro) Mount as partition label -----
Instead of using the block device name for the partition, use the partition label as mount name, falling back to uuid or block device name if the label is unavailable.
----- (Pro) Create symbolic links -----
Create symbolic links in /mnt and /storage to the actual mounts in /sdcard/usbStorage/
----- Filesystem support -----
The filesystems supported depends on your device firmware. On most devices, at least vfat/fat/fat32 and ext2/3/4 are supported. On the latest Android versions, ntfs is also supported in read-only mode. Some devices also support exfat out the box, but most do not.
StickMount can utilize the "ntfs-3g" and "mount.exfat-fuse" binaries to add support for ntfs (untested) and exfat, but these are not included. If you place the "ntfs-3g" or "mount.exfat-fuse" files in the root of your internal storage ( /sdcard ), StickMount will automatically use them.
You can find the needed files here:
----- Troubleshooting -----
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 out of 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
SD card unmounting: If your SD card unmounts when unmounting a USB device, you have a bug in your kernel. This is *not* a bug in StickMount !
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
Please do not use this app thoughtless or without DEEPER knowlege of Android (Root, Custom Recovery, etc.)
This app flashes and backups your device recovery and kernel without rebooting it very fast and easy without a PC or any outside influence.
This app have over 3500 build-in recovery collection of images (ClockworkMod/TWRP/PhilZ) also you are able to flash unlisted images from external or internal storage.
Rashr is able to flash over 90% of all Android devices!
This project is fully open-source and.
★Open-Source (on GitHub: https://github.com/dslnexus/Rashr)
★OpenRecovery Script manager to flash ZIPs
★Over 3500 Build-in Recoveries (ClockworkMod/Touch, Team Win Recovery Project and PhilZ-Touch)
★Flash Kernel and Recoveries without PC
★Flash already downloaded IMGs from internal and external storage
★Backup Kernel and Recovery IMGs without PC
★Full command logging for more control what this App is doing
★If you don't want to support my work you are able to disable the Ads
★Free full app without Ads and any restrictions
★Support my Work only if you want (with Ads or In-App donations)
----- App-Permission and why Rashr need it -----
-Read and write on external storage: save recoveries images or read already downloaded images
-Full network access: download recoveries, kernel and updates
-Google Play billing: donations over Google Play
-[Superuser-App]Full access to all functions of the device: Flashing recoveries and kernel
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
★ Airplane Mode
★ Capture screen
★ Lock screen
★ Hot Reboot
★ Power off
★ Reboot Recovery
★ Reboot Bootloader
★ Reboot DownloadMode
*** Root access to your phone is required to use this application. If you are not aware whether or not your phone has root access, you probably don't have root access.
★ Support Widget.
★ Add Refresh feature.
★ Update Material design.
★ Add Capture screen feature.
★ Add Lock screen feature.
★ Add Hot Reboot feature.
★ Update button capture always on top.
This application comes without warranty, only use it if you are 100% sure what you are doing!
Improper use can make the system unstable, so please inform yourself if you are unsure about a certain feature!
This app is open source
Device Control is an app to control several features of your device as well as some nice extra features like a Tasker, App Manager, Editors, Entropy Generator, Wireless Filemanager and more.
With Device Control you can tweak and edit:
[+] Device specific features like Knock-On, vibration strength, screen color temperature, LCD power reduce, ...
[+] CPU frequencies, governors, i/o schedulers, ...
[+] GPU frequencies, governors, ...
[+] Kernel specific extras like intelli-plug and intelli-thermal by faux, msm dcvs toggle, mpdecision toggle, power scheduling, power efficient workqueues ...
[+] Voltage Control, Fast Charge and more
Note: Features need to be supported by your device. Unsupported features are getting automatically hidden!
It also can monitor:
[+] Your cpu and battery temperature
[+] Time in state of your cpu
[+] Maximum, minimum and current frequency as well as the governor of your cpu (fully multicore aware and toggle able auto refreshing intervals)
Extra tools like:
[+] Tasker (automatic fstrimming, screen off and on actions ...)
[*] Example: You can configure it to automatically toggle your cpu's frequency to a very low value once your screen turns off, to save battery, and restore the value when you are using your phone again.
[+] Editors (vm, sysctl, build.prop, ...)
[+] Quick tweaks (vm, build.prop, ...)
[+] Wireless Filemanager, allows you to access your device's sdcard / internal storage via any webbrowser
[+] App Manager to view information about the app, kill it, view them on Google Play Store, disable / reenable your apps to prevent them from running and hiding them from launcher
Device Control can automatically restore your settings on boot (sections to restore need to be checked in preferences)
Device Control is 100% ad free and will always be.
No need to spend money, you get every feature without paying or donating.
Device Control is in active development, if you like to contribute to the development or just buy me a beer, you can donate via in app purchases!
Donations are not required but highly appreciated!
Explanation of permissions:
ACCESS_NETWORK_STATE, ACCESS_WIFI_STATE: To read your ip address to display it at the Wireless Filemanager
ACCESS_SUPERUSER: Device Control requires root to function properly.
BILLING: For the optional in app donations.
INTERNET: Required for our built-in error reporting service to submit bug reports.
READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE: Needed for the Wireless Filemanager
READ_PHONE_STATE: For better detection of your device.
RECEIVE_BOOT_COMPLETED: To restore your tweaks on boot up of the device.
VIBRATE: To test the vibration strength.
GET_PACKAGE_SIZE: To display size statistics at the app manager
GET_TASKS: To allow to detect running apps and kill them via the app manager
REBOOT, DEVICE_POWER: Used by the flasher to reboot the device without super user permissions on NamelessRom
We are looking for translators and would really appreciate if you could help us out!
(choose your language and go to "packages/apps/DeviceControl")
Be safe and backup everything either to local storage or cloud storage with automatic syncing!
If you don't know where to get your recovery files, just download directly from this app!
1 - Flash boot and recovery .img without even needing to go to recovery.
2 - Flash zip files. Option to wipe cache, dalvik and data when using TWRP or Philz recovery.
3 - Download and flash CWM, Philz, TWRP, Gapps, Franco Kernel, Stock Nexus Kernel (premium), and Stock Nexus Recovery (premium).
4 - Automatic Loki Patch when needed.
5 - Full nandroid backups/restores when using TWRP or Philz recovery.
6 - Backup/Restore kernel and recovery using Sdcard or cloud (Dropbox, Box (premium) or Google Drive (premium)).
7 - Automatic cloud synchronisation of backups between devices and desktops.
8 - Keep track of recently flashed items.
9 - Flash multiple files and build your flash queue.
11 - Flash from anywhere! Do you want to flash from your favorite File Explorer or Email app? No biggie, that also works together with Flashify.
This app is free but has a limit of 3 flashes per day. You can unlock the limit with a quick in-app payment.
• Voted #1 TOP ROOT APP on Twitter.
• New DEMO VIDEO: http://youtube.com/watch?v=YU33zabluSY&hd=1
• No icon! Requires the Titanium Backup (free) app (see "More" section below). This key will turn it into PRO.
• The same key can be used on several devices!
• For download issues & support: read below.
PRO Features Added:
[✔] Multiple backups per app
[✔] 0-click batch restore
[✔] Backup/restore SMS,MMS,calls,bookmarks,Wi-Fi AP as XML
[✔] Multi-user support for some apps! (eg: games)
[✔] Batch verification
[✔] Backup apps without closing them!
[✔] Create your own update.zip containing apps+data!
[✔] Restore individual apps+data from non-root ADB backups!
[✔] Restore individual apps+data from CWM backups!
[✔] Restore individual apps+data from TWRP backups!
[✔] Hypershell speed
[✔] Migrate system data across different ROMs
[✔] Market Doctor (relink apps to Market)
[✔] "Destroy all Market links" feature
[✔] Apps freezer (incl. batch support)
[✔] Market "auto updating" manager
[✔] Convert user apps <=> system apps
[✔] Unlimited schedules
[✔] Sync to/from Dropbox (manual/scheduled)
[✔] Sync to/from Box (manual/scheduled)
[✔] Sync to/from Google Drive (manual/scheduled)
[✔] TB Web Server: download/upload your backups as a single ZIP on your computer
[✔] Load/Save a Filter and use it in Widgets/Schedules
[✔] Change the device's Android ID, restore it from a backup or after a factory reset
[✔] Protect backup against deletion
[✔] Send backup (to e-mail/cloud) and import it in 1 click
[✔] Backup→Verify→Un-install an app in one shot
[✔] Freeze/defrost/launch apps in a single click
[✔] CSV export any app DB (e-mail or Google Docs)
[✔] Brand the app with your name
[✔] Bloatware Melter (experimental)
[✔] Convert app data to/from faster WAL DB format
[✔] And more!
[✔] Dalvik cache cleaner
[✔] Integrate system app updates into ROM
[✔] Move apps into ROM
[✔] Integrate Dalvik cache system elements into ROM
What the Press says:
"The Most Essential App For Android" - Tech'n'Life
"NONE can compare with this one" - Android Market Review
"The Best Backup App for Android" - Lifehacker
"The hands down best Backup on the market" - Absolutely Android
"It is a must-have backup app" - Droid Ninja
Support & Upgrades:
• All upgrades are FREE.
• If Market won't download your PRO key: although credit card authorization *usually* occurs instantly, in rare cases it may need up to a few hours to complete. Try the Web version of Play Store. If problem persists, login at checkout.google.com to cancel your order & try again.
• If your PRO key doesn't work (eg: installed before the purchase completed) please un-install it and then reinstall it from the Web version of Play Store.
• We aren't responsible for any currency conversion fees charged by credit card issuers.
• For support please see the Knowledge Base at http://titaniumtrack.com/kb and then e-mail us at the address below.
Here's the older TB Pro demo video:
Thank you for supporting our work!
This app require root! Make sure you device is rooted first! Some devices require busybox also.
Special thanks to drifty for the nifty logo!
All original credit for discovering the importance of efs and backups goes to autoprime!
Optimus G Pro and LG G2 support is due to drjbliss and loki
Freegee is all new and rewritten from scratch. Everything is done on device now so there is no more white listing every variant, only just enabling models.
If you run into an error please report it, send me a logcat. I can be reached via email or on xda/irc.
Dropbox support is under menu -> settings.
This is the donation version. It is exactly the same as the free version.
This is the next step in Project FreeGee. Have an LG Optimus G, LG Optimus G Pro or LG G2? If so this app will allow you to unlock (Optimus G only) or bypass your bootloader, remove LG Security and install cwm or twrp recovery. With removed lg security you can now uninstall any preloaded applications you want.
Please contact Shelnutt2 on freenode irc #lg-optimus-g with any problem.
The old 1.2.4 version, which is now depreciated can be downloaded here:
The source is available here: