The application covers various functions to help field engineers to fault find Daikin VRV equipment such as,
VRV Additional Charge Calculation
Replacement PCB Dip Switch Settings
Pressure Transducer and Temperature Thermistor Checks
Also various Outdoor Unit field settings including,
Fan Coil and BSVQ Box Count Check
Refrigerant Recovery Setting
Outdoor Unit Emergency Modes
VRV III & IV Short Test Run
There is Also Daikin Altherma support for,
Additional Refrigerant Charges
C Series Altherma Field Settings
Dip Switch Settings and much more...
The Daikin Online Controller application allows you to:
-Monitor the status of your Daikin air-conditioning unit
-Control the operation mode, set temperature, air flow rate and direction
-Schedule the set temperature and operation mode with up to 4 actions per day for 7 days.
Compatible units in combination with BRP069A41:
Compatible units in combination with BRP069A42 (available from November 2014):
Print the marker (the picture that you'll find on our website) on a sheet of A4 or A3 paper. Position the sheet of paper on the wall where you would like to install the unit that you have chosen, frame the sheet of paper with your tablet and your 3D air conditioning unit will appear in its actual size. Switch it on, observe it from every angle and take a photo if you want to compare all the possibilities offered by Daikin.
But that's not all. Position the marker on the floor on the terrace or the balcony where you intend to install the outdoor unit (of the single and multi split range) and you will see it appear on the screen. In this way you can choose the best position for correct operation and maintenance.
Very useful for plastic extrusion understanding.
Four calculations are available : Blown Film, Tube - Pipe, Cast Film - Sheet and Pellets - Fibers.
Just enter the four values and shear rate will be automatically calculated. You can choose between usual densities of different molten plastics by taping on the down right icon.
This application is provided by Daikin Chemical Europe GmbH.
Smart Remote control for electronic devices with your SAMSUNG Galaxy S4, S5, Note3, Galaxy Tab / HTC ONE Smart phone with IR(Infra Red) Remote.
Please check supported SAMSUNG GALAXY/HTC smart phone list below!!!
You can use your smart phone as IR Smart Remote Control for
A lot of remote controls are already exist in built-in app (Watch On/HTC TV)
But ASmart Remote supports more devices(DSLR, Projector, Air-conditioner) and is so simple !!!
And we are updating remote controls everyday!!!
ASmart Remote supports most brands and models and all functions are verified.
You don't need buy universal remote control any more.
Just download ASmart IR Remote and you can remote control any electronic devices.
ASmart Remote is FREE!!!
### IR remote control works only with Android device IR built in
### Supported Android Devices :
SAMSUNG GALAXY S4
SAMSUNG GALAXY S5
SAMSUNG GALAXY NOTE3
SAMSUNG GALAXY MEGA
SAMSUNG GALAXY ZOOM
SAMSUNG GALAXY S4 MINI (With IR)
Other SAMSUNG smart phone, tablet with IR
HTC ONE M7
HTC ONE M8
HTC ONE MAX
Other HTC smart phone with IR
Use suction pressure, liquid pressure, superheat, subcooling, amperage, and humidity control to determine what problem the system has.
*Tip - Controlling Cable and Satellite boxes from IRUDB databse: Instead of searching for your cable or satellite providers name take a quick look at the bottom or back of the cable/satellite box for its name. Then when you search for IR codes in the database you can search for the name of the box. The box and the remote (the hardware) are usually made by a different company. The cable and satellite companies (the software) often rely on other companies to provide hardware for their cable or satellite software. I hope this helps!
Money Back Guarantee! - This is a free application with extra features that can be unlocked for a one time only in-app upgrade. If for any reason you would like a refund from your in-app upgrade then send an email with your order number to email@example.com. Your order number is automatically emailed to you after the in-app purchase is made. Any refund request made will be granted. Guaranteed! You can also email if you would just like some help.
*View and use all IR-codes/buttons in the IRUDB™ database.
*Use (Quick) TV, Cable, Satellite, DVD, Blu-ray, and Air Conditioner remotes with GUI.
*Create a single Saved Remote.
*Button vibration (Saved Remote).
*Press and hold buttons to send repeat commands (Saved Remote).
*Save Custom Remotes from the IR databases (Saved Remote).
*Change remote backgrounds (pre-set and custom images)(Saved Remote).
*Edit button texts (Saved Remote).
*Edit button IR signal. (Saved Remote).
*Change button backgrounds (pre-set and custom images).
*Adjust button sizes.
*Adjust button positions (drag & drop + fine tune button positions).
*All ads removed.
*Create unlimited Saved Remotes.
*Quickly create Saved Remotes from the (Quick) TV, Cable, Satellite, DVD, and Blu-ray remotes.
*Share custom Saved Remotes
*Download shared custom Saved Remotes
*Manually input IR codes not found in the IR databases (copy & paste)
**Read and save codes from physical remote(s) – (HTC ONLY!)
Android 5.0 Lollipop supported
Make sure your phone or tablet has a built in IR Blaster before trying this application! Many 1 star reviews are from users that do not have a phone with a built in IR Blaster.. Please consider leaving a rating if you found this application useful. This entire application was created by one person only.
In app purchases: This allows you to remove ads and unlock additional features from inside the application.
Identity: This is to verify your in app purchase against your email address on new devices.
Photos and Media: This allows you to add your own custom images and graphics into the app. You can add images from your image folders to the remote background and individual button backgrounds.
Control Vibration: This is allows your phone to vibrate when a saved remote button is pressed (optional feature).
Full Network Access: This is required for internet access. The IRUDB™ database is accessed via internet.
View Network Connections: This is required for internet access.
Makes for a great Universal Hotel Remote!
THIS APP IS NOT AFFILIATED WITH ANY OTHER DEVELOPERS.
The tado° heating app enables an intelligent heating system for your home and adjusts to your requirements automatically via smartphone: the heat is turned down when the last person has left the house. Just before somebody comes home tado° turns up the heat. Additionally, the heating control by tado° is adaptive and accounts for the weather forecast and for heating properties of your home (i.e. insulation, window surface area). With tado°, you save up to 31% on energy and heating costs.
THE TADO° SMART THERMOSTAT
The tado° mobile App can only be used in combination with the intelligent tado° Smart Thermostat which connects to your heating system. The Smart Thermostat is available on https://www.tado.com and can be easily installed without assistance.
WHAT DOES THE TADO° APP DO?
It is the most important part of tado°. Via smartphone your heating system is being informed whether you are at home right now or not – automatically. Thus, tado° intelligently controls your heating system.
With the heating app, you have everything under control, can change all settings, review reports, and manually adjust the heat when you are on the go.
THE MOBILE APP FEATURES:
* Display of the current temperature at home
* Display of the current mode and operation
* Visualization of temperature and heating reports
* Display of the tado° presence detection
* Newsfeed about system activity
* Setting of desired temperatures and comfort level
* Heating cost prediction
* Manual mode
WHAT DOES TADO° COST?
The mobile App is of course free.
However, you’ll also need the tado° Smart Thermostat which connects to your heating system so that the heating control is able to work. You can either rent it for € 6.99 per month or buy it for a one-time fee of € 249. Please find more information on https://www.tado.com.
In return, with tado° you’ll save up to 31% on heating costs which means savings of € 200-300 per year depending on criteria like energy consumption and household size. So, tado° pays for itself!
SAVING ENERGY WITH TADO°
tado° helps you save energy and gives you the comfort of living a bit more responsibly.
Despite this, you don’t have to be inconvenienced. tado°’s heating control is so smart that you can combine optimal living comfort with minimal heating costs.
For support please visit https://support.tado.com/.
Properly sized air conditioners are critical to the comfort of your home and health of your loved ones. The sizing tables you find at the hardware store are often inadequate, forcing you to estimate your true cooling needs. Underestimation will leave your home uncomfortably warm on the hottest days. Overestimation can be dangerous, filling your home with moisture and promoting hazardous mold growth.
The Basic A/C Calculator makes air conditioner sizing fast and simple, using a mathematical algorithm derived from cooling tables and load calculation manuals to give you a rough estimate of your specific cooling needs. We have implemented a unique sun exposure/climate zone system to improve the accuracy of the estimation algorithm.
The Advanced A/C Calculator (coming soon!) puts the power of true cooling load calculation software at your fingertips. Using the same data the pros use, you can determine the exact cooling needs of your home, either as a whole or one room at a time.
It helps you to check air conditioner condition. Error code check, Trouble shooting and Sensor check are available.
*: Applicable to RAC/PAC models with new serial communication method, "model code with G"" AS*G--, AU*G--" , Models with old serial communication method are not applicable.
For VRF, models V-II, J-II or later are applicable.
This application is tested on the following models;
- LG Nexus 5
- ASUS Nexus 7
- Sony Ericsson Xperia Arc S LT18i
- Sony Xperia S Z1
- Samsung GALAXY SII/SIII
- Motrola Droid Razor
Non Android operating devices will not be supported.
- Blackberry (All models)
This application has everything You need to do the maintenance of heating equipment. The free version includes spare parts listing, error codes, commissioning parameters...
This beta release has De Dietrich boilers in the database.
The Danfoss Heating app for installers is like having a second toolbox right in your pocket at the point of installation. It can help you install Danfoss products in a number of ways, and assist in the sales process with a wide range of marketing and support material. For example, this app helps you make on-site energy savings calculations for customers who may be considering converting to the new living by Danfoss ® thermostats or upgrading to a new floor heating system. The app makes hydronic balancing calculations and conversions quick and easy.
Some of the ways this app can help you in your daily work include:
Radiator Thermostat Support
• Ease installation with a unit calculator for living by Danfoss ® products like living eco, living connect and Danfoss Link.
• Calculate pre-setting of radiator valves by selecting radiator type and size to get correct valve pressure settings.
• Increase sales with support tools for living by Danfoss ® products, such as a return on investment calculator, product facts and sales material.
• Use installation videos in the app to assist you onsite during installation.
Floor Heating Installation Support
• Calculate costs of installing CF2+ Danfoss wireless floor heating system for your customers in both new build and renovation projects.
• Improve sales support with a product video featuring key user benefits and facts about CF2+ .
• Watch Installation videos for easy reference anywhere and anytime you need them.
Balancing Valve support
• Calculate flow and pressure measurements easily with the built-in equation tool.
• Convert pressure, flow and power and temperature between metric and non-metric systems, Celsius and Fahrenheit and various other measures easily. A handy tool for all HVAC professionals.
Additional features of the Danfoss Heating app include personalization options by specifying your “favorite tools”. You also get handy contact information for the nearest national Danfoss sales office and easy access to the latest news from Danfoss.
Danfoss is a leading company in the heating industry offering a wide range of components and solutions for generation, distribution and use of heat for comfort and energy savings in home and buildings. By continuously improving products and services, we strive to build strong relations to customers and business partners throughout the value chain. We have manufacturing facilities in more than 10 countries, and sales companies and agents in all heating markets worldwide.
Checks your phone temperature and shows on the screen. Gives you the realistic record of the temperature and its real time changing.
*** Detection of the over-heating apps
Never been so easy to find out which app is causing trouble. Now, this app will tell you how which app causing your battery drain over-heating. Also, dynamically analyzing CPU usage and detecting apps that are constantly using your CPU.
*** Cool down your phone
You only need one tap to cool down your phone. Its shows you in the list and allows you to close overheating apps with only one tap to lower CPU usage and cool down your phone.
What causes my phone to over-heat?
Constant usage of the apps and background running applications cause your phone to over-heat and drain your battery fast.
The application allows, while selecting a family of Daikin products to know the meaning of an error code and its potential cause.
This application also provides, depending of the temperature of the probe, to get its resistance value.
This application is published by Daikin, a global leader in heat pumps. It was created by David Le Cam.