Try the TEST version before purchasing. If the TEST version lists your devices and shows you the disk types and sizes, then it's working perfectly. The TEST version will not let you mount anything for use. You can download the test version at: http://www.interphaze.com/files/USB_Mount_All_Test.apk
Mount multiple drives and drive partions on your Honeycomb tablet. Makes all your data available.
Supports ext2, ext3, ext4, ntfs and fat32 filesystems. Can access primary and extended partitions. You can select which volumes you wish to mount, or mount all volumes with a single click.
Also allows you to mount the exernal Micro SDCard in the above mentioned formats.
STAR FEATURE: Allows you to mount the drives inside the internal sdcard directory. Allowing access to the external sdcard and usb drives to apps that normally can't access them!
Tested on Acer and Xoom. Please test your device using the TEST version mentioned above. If you don't see disk types and sizes with the test version, then this version will not work either.
!!! REQUIRES ROOT !!!
!!! Tested on Samsung Galaxy SII ICS 4.0.3 (CF, Siyah, N.E.A.K kernels) !!!
Works on following ICS devices:
- Samsung Galaxy S2
- Samsung Galaxy Note
- Samsung Galaxy Tab 2
Once Ntfs Mounter is installed and you connect a NTFS/EXT formated USB stick with the USB host / OTG cable, the application will mount your drive.
Device partitions will be mounted to: /sdcard/usbStorage/UsbDriveA...UsbDriveF
SD Card will be mounted to: /mnt/sdcard/external_sd
You don't need to run the Ntfs Mounter each time, drive should be mounted automatically.
** What's new in 0.5 ver **
- file systems support: NTFS, EXT2, EXT3, EXT4
- SD card support. The card is visible in all applications including standard android apps (camera, file manager,...).
- user applications can be installed into the NTFS, EXT2, EXT3 or EXT4 formatted card
- multi partitions support on USB drives
- full system integration - no more messages that card or USB drive is not formatted or blank
- standard android notifications are used instead of old Ntfs Mounter notifications
- USB drives are mounted into: /mnt/sdcard/usbStorage/UsbDriveA,.../mnt/sdcard/usbStorage/UsbDriveF
- some bugs are fixed
XDA Developers thread: http://forum.xda-developers.com/showthread.php?p=26095535
** Disclaimer **
I am not responsible for any damage caused to your device or data or feeling.
It is recommended to backup your precious data.
Refund policy: 2 weeks.
I must still dedicate all time into finishing the next generation of 4EXT Recovery, which is needed to support any new devices and features.
Please have a look at http://tinyurl.com/9da62jq for status updates.
Thank you very much for your patience!
HTC Sensation / XE, Incredible S / 2, Desire Z / G2, Desire S, Desire, Desire HD, Inspire 4G, myTouch 4G, Nexus One, Thunderbolt, Evo 3D GSM / CDMA, Amaze
About requests to add new devices:
As a single developer I must concentrate on one task at a time:
Feature requests for Recovery Control or 4EXT Recovery, or on adding new devices, while providing personal support to my users.
That's why it takes a longer time until I'm able to add new devices.
By buying this app, you not only get a feature rich application that lets you control, configure and handle the advanced features of 4EXT Recovery with comfort, you also contribute to the future of the recovery itself!
Thanks to the great community the project will continually improve and stay as active as possible!
Translations: it's a community project at crowdin.net. Big thanks to everyone participating!
- Start on boot:
*) deactivated by default
*) Needed to setup schedules in Android.
(!no background process!)
*) haptic feedback settings for recovery
*) to not try to connect if you are offline
*) to stay awake while you are downloading.
Updates, recovery downloads
Please see www.4ext.net for a complete feature list and the recent changelog.
*) Restore: Let the App do the md5sum check INSTEAD of recovery!
-> To make sure the backup will restore before you even reboot into recovery! This also gives you the opportunity to fix md5sums in case you really need that backup badly.
-> this prevents situations where you might be left with a non-bootable device.
*) Start Backups, Advanced Backups, Restore, Advanced Restore directly from inside the app
*) Check your backups' health to ensure they will restore later when you need them.
*) Convert backups between EXT3 and EXT4
*) Calculates real values for the space needed to create a new full or advanced backup
-> for "Advanced Backups": While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.
*) Install multiple zip files at once ->
*) Optionally display the md5sums of all the files you are going to flash in one go!
-> So you can make sure all are ok before you flash them.
*) Prefer to stay inside recovery after all your selected operations are done? No problem.
*) Individualize your recovery: install, uninstall 4EXT Themes without the need to reboot.
*) Had a bad Recovery session and didn't have the time to save the log file? No problem, let the app save it to your sdcard!
*) Encountered a problem? Use the report issue button to tell me about your problem and optionally attach valuable info such as your last recovery log to help me help you much better.
*) Safely online install or upgrade 4EXT Recovery (md5sums are automatically verified)
*) View all changelogs or known issues of any version available to your device.
*) Stay informed about any newly discovered bugs
*) The following example would be possible to do in just one session (one reboot in to recovery):
-> Restore a backup
-> Create a backup or advanced backup before the restore process starts
-> Format all you partitions in a file system of your choice before the restore process starts
-> Flash as many zip files you want after the restore is complete
-> Fix permissions afterwards if you like
-> Select to stay inside recovery or reboot automatically once all actions are complete
*) .. and much more! Please see www.4ext.net
Works with Android 4.4.2, 4.4.3 and 4.4.4.
(In case of problems let me know!)
It is made for:
- Nexus 7 2012 (grouper)
- Nexus 7 2012 (tilapia)
- Nexus 4 (NON CAF Rom)
- Nexus 4 (CAF Rom)
- Nexus 5 (NON CAF Rom) (Experimental)
(If you want to add your device email me)
This App should work with most KitKat ROM.
In case of problem email me.
To prepare your device for F2FS read here:
- Nexus 7:
- Nexus 7 3G:
- Nexus 4:
- Nexus 5:
- PAC ROM
Usually it doesn't work with Stock ROM because they are too big.
(Note: This is provided with no warranty. You are installing this software at your own risk)
Any problem to download ? http://goo.gl/KCDyL
ROOT ACCESS NEEDED AND MANDATORY TO GET ALL OPTIONS ACTIVATE.
You go to your sdcard in your phone and PC simultaneously.
The changes are visible immediately.
Don't use Android mount
This application is a widget, but not only :)
DISABLE AUTO-MOUNT FROM ALL APP (ex: WinAmp)
• Auto mount on USB connection
• Choose what sd-card is mounted (for mobile with 2 sd-card)
• Hide notification after a delay
• Scan media on unmount
• Vibrate on un/mount
• Option to mount without check if usb cable is present
• Disable media scan
English, French, Russian (Vladimir), Italian (Luca T.), Danish (Rasmus B.), German (Flo.), Polish (Kamil S.), Chinese (Jen J.), Turkish (Yaşar M.), Korean (MoonHee C.) you want your language ? Send me an email
• Add root privileges in manifest
• Remove bad messages
ROOT ACCESS NEEDED
Contact me for any problems
The only what you need is ROOT! (for automount ntfs,reiserfs and ext 2-4 you need kernel support)
You need at least 5mb free cache! Install this app to your internal Phone Device otherwise you can get trouble with automount! And again! Please make sure the app is installed to your internal phone memory !!!
now you can create, delete, check and repair your SD Cards with a touch!
Now the time is over you need any Desktop PC to easily create partitions.
Now it is more easy on an Android! Support all drives wich are from type SD!
Primary and extened Partitions are supported.
Note! Some Devices can not use extended Partitions and hang at boot!
You can create Partitions from Type:
FAT32 / FAT32(LBA) - Linux - Linux Swap -HPFS/NTFS - EFI GPT EFI FAT-12/16/32 -FAT 16 / FAT16(LBA)
You can format all Partitions on your SD Card, with Filesystems:
exFAT FAT32 EXT2 EXT3 EXT4 Linux Swap NTFS and ReiserFS.
You can mount all Partitions, für ext2-4 reiserfs and ntfs you need kernel support!
Automount after Reboot for all Partitions!
You can check the filesystems: FAT16,FAT32,exFAT,ext2,ext3,ext4,ntfs
You can repair the filesystems: FAT16,FAT32,ext2,ext3,ext4
You can backup and restore yout partitions and MBR!
You can set readwrite when your SD card is set to readonly!
You can benchmark your partitions!
This Tool needs ROOT!
This app is a license key only, requeries the Link2SD (free) app and turns it into Plus edition, removes ads and unlocks additional features. You will see "Link2SD Plus" on the title in Link2SD (free) app.
Plus features added
✔ Links internal data directory of apps to SD card
You need to use a non-FAT file system (ext2, ext3, ext4 or f2fs) on your 2nd partition. Because the FAT file system (FAT16, FAT32 or exFAT) does not support UNIX file ownership or permissions and causes a security breakdown of app's private files.
✔ Links external data and obb folders of apps and games to SD card
✔ Links dex files of the system apps to SD card
✔ Auto clear cache service
✔ Removes ads from Link2SD
**** Note for old Link2SD Plus users ****
Due to a problem with Google Play the package name of the app has changed and published as a new app.
It is the same as the old one, you can continue to use old version. You can reinstall the old version from "Play Store -> My apps -> ALL".
But if you want to or need to install the new one please send me your old order number (transaction id). I'll refund it so you can purchase the new one.
**** Support & Upgrades / Reinstalls ****
● Keep "Link2SD Plus" installed and do not freeze (disable) it.
● Link2SD Plus purchase is per Google account for purchases on Play Store, all upgrades and reinstalls are free.
● You can install Link2SD Plus on any device for free as long as you use the same Google account you bought it with. Note that for Google Play Store purchases if you have multiple Google accounts on the device, your "original" Google account should be selected in Play Store (side menu => top-right white arrow next to your account).
If you're getting license error
This is reported in the following cases:
● Play Store app not loaded. Please start Play Store app and wait until it fully loads start page. Play Store app can fail to load, for example, during its self-updating. Please wait until it fully loads, then start Link2SD again
● internet connection is not available/unstable or Play Store app/services are blocked from internet. It requires a network connection for the first license check. But then you can go offline for a period of time before requiring another license check. Caching is enabled for license check.
● Link2SD Plus is in fact not licensed/order is incomplete/refunded/canceled. Please open your transactions in "wallet.google.com" and check your Link2SD Plus status is "Complete"
● invalid Google account on the device. Google Play apps are bound to the Google account, if you change it, Play Store can't recognize your purchase anymore. Please re-add that Google account back to your device and/or select this account in Google Play Store app (side menu => top right arrow next to your Google account)
● too much requests from apps to Play servers for license check. Please try again later (in 10 minutes)
● (Android 2.x) background data is disabled
To resolve this issue:
1. uninstall Link2SD and Link2SD Plus then reboot
2. ensure you have internet connection on the device up and stable
3. install Link2SD and Link2SD Plus from Google Play Store app. Reinstalls to the same account are free. (Installing from the APK won't resolve the issue)
4. you may need start/wait a bit/exit Link2SD Plus a few times to reload license state.
5. if it didn't help, clear data of Google Play Store and Google Play services and reboot
If you're getting “insufficient storage available” error when installing Link2SD Plus even you have enough free space
To resolve this issue:
1. "Clear all app cache" within Link2SD
2. set "install location" to automatic within Link2SD settings and reboot
3. if it didn't help, clear data of Google Play Store and Google Play Services and reboot
!!! REQUIRES ROOT !!!
Various Nexus and "stock Android" devices do not automatically "mount" mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.
StickMount is known to work on many devices, but is built *only* with *Nexus* devices in mind.
Once StickMount is installed and you connect a USB stick with a "USB host / OTG cable", the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.
If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.
Mass storage devices are mounted to "/sdcard/usbStorage/xxxx/".
----- (Pro) Kill apps preventing unmount -----
Sometimes an app has a file in use located on the USB device, and won't let go of it. This can prevent StickMount from unmounting the USB device. It will seem like the device stays connected (this is harmless). StickMount Pro provides an option that attempts to kill (terminate) all the apps that are preventing the unmount from succeeding.
----- (Pro) Media scan -----
StickMount Pro supports triggering the media scanner on each (un)mount action. This will automatically make the files on your USB device available in apps like Gallery and Music. Please note that the media scanner is not a visible process on all Android devices - it might actually work silently in the background without any visual cues. It may take a minute for your files to show up, so don't panic if they don't show immediately.
Even if you have this option enabled, you can prevent folders from being scanned by placing an empty file called ".nomedia" in that folder. If you put it in the root of the USB device, the entire device will not be scanned.
----- (Pro) Mount as partition label -----
Instead of using the block device name for the partition, use the partition label as mount name, falling back to uuid or block device name if the label is unavailable.
----- (Pro) Create symbolic links -----
Create symbolic links in /mnt and /storage to the actual mounts in /sdcard/usbStorage/
----- Filesystem support -----
The filesystems supported depends on your device firmware. On most devices, at least vfat/fat/fat32 and ext2/3/4 are supported. On the latest Android versions, ntfs is also supported in read-only mode. Some devices also support exfat out the box, but most do not.
StickMount can utilize the "ntfs-3g" and "mount.exfat-fuse" binaries to add support for ntfs (untested) and exfat, but these are not included. If you place the "ntfs-3g" or "mount.exfat-fuse" files in the root of your internal storage ( /sdcard ), StickMount will automatically use them.
You can find the needed files here:
----- Troubleshooting -----
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 out of 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
SD card unmounting: If your SD card unmounts when unmounting a USB device, you have a bug in your kernel. This is *not* a bug in StickMount !
AppMgr (also known as App 2 SD) is a totally new design app that provides the following components:
★ Move apps: moves apps to either internal or external storage for getting more available app storage
★ Hide apps: hides system (built-in) apps from the app drawer
★ Freeze apps: freeze apps so they won't use any CPU or memory resources
★ App manager: manages apps for batch uninstalling, moving apps or sharing apps with friends
* Over 30,000,000 Downloads! *
★ up-to-date UI style, themes
★ batch uninstall apps
★ batch move apps to external storage
★ notify when movable apps installed
★ hide apps from app drawer
★ freeze apps to a stop state
★ 1-tap to clear all cache
★ batch clear apps cache or data
★ batch view apps on Google Play
★ export the app list
★ install apps from the exported app list
★ quick uninstall or move an app by drag-n-drop
★ sort apps by name, size or installation time
★ share customized app list with friends
★ support home screen widgets
★ support Android 2/3/4
★ support "Move2SD Enabler"
★ customizable notification sound, vibrate and light
Are you running out of application storage? Do you hate having to check each and every app if it supports moving to the SD card? Do you want an app that automatically does this for you and can notify you when an app can be moved? This component streamlines the movement of apps to on your device's external or internal storage through your device's Settings. With this, you'll have more control over your ever expanding collection of apps. This is crucial to anyone who has memory management issues.
You don't care for all the apps your carrier adds to Android? Well, now you can get rid of them! This component enables you to hide system (built-in) apps from the app drawer.
You can freeze apps so they won't use any CPU or memory resources and consume zero-battery. It's good for you to freeze apps that you would like to keep in device, but don't want them to run or be uninstalled.
We have been selected as a Google I/O 2011 Developer Sandbox partner, for its innovative design and advanced technology.
* Move apps function may not work on your device as manufacture removes the function of moving apps to SD from Android system
* Read user's manual or FAQ by going to: AppMgr > Settings > About
Danish-Christian Stangegaard Kappelgaard
Filipino-Vincent C. V. Estrellado
French-Jérémy Roth (JeremX)
Galician-Xesús M. Mosquera Carregal
Polish-Kamil Szymański, Grzegorz Jabłoński
Portuguese-Altieres Lima da Silva, , Luis Barbosa de Assis Junior
Urdu-Hafiz Muhammad Moin Ud Din
Vietnamese-Phong Quang PdaViet
If you are interested in helping us to translate this app to your native language, please let me know. Thanks.
If the FREE version does not work for you, then the FULL version will also not work!
A Step-by-Step installation guide: http://usbstick.hechler.de/installdoc/
Works with the meenova Mini MicroSD Card Reader (see http://www.meenova.com) and SanDisk 64GB microSDXC card out-of-the-box without ROOT!
Please report problems to the forum: http://usbstick.hechler.de/viewtopic.php?f=3&t=8
or via developer mail to: email@example.com
This Plugin is for tablets (like the Nexus 7 or Nexus 10) or phones (like Nexus 5) which have an USB OTG connector, but do not mount attached USB Sticks.
FAT12, FAT16, FAT32 and exFAT formatted Sticks can be read and written to.
Reading and streaming from NTFS formatted Sticks is possible.
ROOT rights are NOT needed.
The filemanager Total Commander can be installed from the Play-Store: http://play.google.com/store/apps/details?id=com.ghisler.android.TotalCommander
Usage is at your own risk.
Do not use it with Sticks containing important data.
For more details look at the forum: http://usbstick.hechler.de
About the permission "full network access": This is needed to open a local network socket for streaming. The plugin does not connect to the internet.
With a FAT32 filesystem, you can copy files to any USB mass storage device and manage your files on it (edit filenames, add directories, delete files) too.
You can also manage your files in the internal memory of your device.
This application has been designed for Nexus products which have an USB "OnTheGo" port, as the Nexus 5, Nexus 7 and Nexus 10, and the brand new Nexus 6 and Nexus 9. But it could work on any device with an USB OTG port Under Android 4.0 or later, including the last Android 5.0 Lollipop.
Root privileges are NOT necessary!
For now, FAT32 filesystem is supported for data read and write, and NTFS filesystem is only supported for data read. You can use USB sticks or SD card readers with any compatible USB OTG cable.
*** NEW FEATURE ***
You can now play playlists (m3u and m3u8 files) and multiple audio files (mp3, aac, m4a, flac, ogg and wav files) at the same time from your USB OTG mass storage device. For that, you need to install my new app Simple Music Player which exists in two versions:
- Free version: https://play.google.com/store/apps/details?id=com.kyuudroid.simplemusicplayer.free
- Paid version to support my developments and get some additional features in the future:
Once Simple Music Player is installed, select the files you want to play on your USB device, push the open button and select the Simple Music Player app.
This is a brand new feature, so if you have any issue, don't hesitate to send me an e-mail! Your feedback would be appreciated too.
*** FEATURES ***
Nexus USB OTG File Manager allows you to open your files directly from your USB device! You just need to have an app that can handle it. For audio and video, I advise you to use VLC.
The new Network Access authorization is only here for local use to be able to open the files. The app NEVER send or receive data to/from Internet.
Nexus USB OTG File Manager supports devices with multiple logical units (like a GPS with an internal memory and an additional SD card) and allows you to choose which logical unit you want to read.
Nexus USB OTG File Manager now includes an "Advanced Mode" which allows you to access to all the files of your device. You can now create files and directories outside of the official Android public directories. This is for advanced users only!
Before buying this application, please try the free trial version named Nexus USB OTG FileManagerTrial to be sure that this application is working with your USB devices.
This is not an official Google application. Nexus brand is the property of Google.
• USB Host Mode capable device
• USB OTG Adapter
• root access not needed!
Under the hood
If you want to contribute or file a bug report — or are just curious about the inner workings — you can do so on https://github.com/alphadev-net/drive-mount/
Mostly Apache License, Version 2.0, if not stated otherwise.
• https://www.iconfinder.com/icons/111008/usb_icon (CC BY-SA 3.0)
• https://developer.android.com/design/style/devices-displays.html (CC BY 2.5)
SD Insight is a free, fast and easy to use application that you use on your cell phone. Within seconds the application reads the technical details from your SD card and displays the information in an easy to understand format.
SD Insight clearly displays the SD card’s manufacturer name, date of manufacture, and the product name and serial number. You can also view technical details about the internal eMMC and SDIO devices in your cell phone. Additionally, you can easily see if your SD card is a counterfeit one.
LUKS Manager provides on-the-fly encryption (AES by default) to virtual folders on Android devices.
These virtual folders can be dynamically mounted, unmounted, created and deleted as needed. Similar to Truecrypt in functionality.
Note: Truecrypt and LUKS Manager volumes are not cross-compatible.
Note: Maximum volume size is limited by the filesystem it is created on. Most SD Cards are formatted as FAT32 and FAT32 only supports file sizes up to 4GB. This is a limitation of the filesystem not LUKS Manager. If you want volumes larger than 4GB you must create the volume on an EXT2/4 partition.
**** If the application does not work for you, please visit my forums and let me know! I'm just one person, I have one device I test on; simply telling me it doesn't work for you doesn't help me at all. ****
If you have any problems, questions, comments or concerns please visit my forums and speak up!
The Android device must:
* Be rooted *
* Have a kernel that supports secure dm-crypt modes (CONFIG_DM_CRYPT) and loopback devices
* Have BusyBox installed
* Have SuperUser installed
Most stock kernels do NOT work!
This package contains:
* A statically compiled and stripped version of cryptsetup for the ARM7 using the tools provided by The Guardian Project.
* A statically compiled and stripped version of mkdosfs from dosfstools package for the ARM7.
* A bash shell script called "luks" that does volume management.
* A native java app that provides a GUI interface to the luks script and a basic file explorer.
Fixed lockup when creating volumes with FAT support disabled.
Fixed text editor menu ordering.
Added support for Samsung preferences path.
Fixed false volume notifications on non-rooted phones.
Notification fixes when volumes are created, mounted and removed.
Removed time stamp on volume mount notifications.
Set minimum volume size to 3MB in luks script.
Improved volume unmount reporting.
Symbolic links to devices may be used as containers.
Modified the cut command to work with more versions of busybox.
Fixed a bug dealing with volume removal when launching the luks script manually.
Rewrote code sections due to moderate source corruption. *sigh*
About text changes and updates.
Major rewrite to the luks shell script and GUI app to support user defined volume locations.
Encryption cipher and keysize are now user definable. (kernel support required)
Moved storage of volume information:
Prompts to upgrade if loop device files are found in SDCard .data directory.
Removed top level restriction on file explorer activity.
Default file system changed from EXT4 to EXT2.
FAT file system support now enabled by default.
Added volume mount and unmount desktop shortcuts.
Added notification when volumes are mounted. (Can be toggled off in preferences)
Added landscape support to the main and volume edit activities.
Added basic SDcard support to install binaries routine.
(Fixes java.lang.NullPointerException on binary install.)
Added toggle to disable binary hash checks on startup. This enables customized luks scripts and/or binaries.
Small fix to application initialization. (hopefully fixes odd reboot issue on some devices)
Attempts to unmount volumes on ACTION_SHUTDOWN and MEDIA_EJECT broadcasts.
Additional checks and error handling if no volumes exist.
Additional error handling in luks script during volume mounting and creation.
Added required BusyBox applet checks on startup.
About Dialog additions / changes.
Small text changes (formatting and typo fixes).
Recompiled lm.cryptsetup binary under android-ndk-r6b.
Hopefully this will stop segfaults on various devices.
* Browse your nandroid backups
* Save files anywhere
* Send files
* Open Files
Easily install single apps from your nandroid backups.
Easily email single apps and files from your nandroid backups or send them to your dropbox or wherever...
Currently supports nandroid backups stored as yaffs2 images (.img) as wells as ext4 images (.ext4.tar).
Should work with ClockWorkMod (CWM) backups and many others that use standard nandroid...