- Display of the angle values
- Permanent Calibration
- No ADS, no network needed!
If you enjoy this app, please visit our homepage http://www.qooapps.com.
Waren Sie schon einmal betroffen von Hochwasser oder sogar Überschwemmung?
Mit der offiziellen Pegelstände App des NLWKN (Niedersächsischer Landesbetrieb für Wasserwirtschaft, Küsten- und Naturschutz) können Sie sich nun unterwegs und zu Hause über die aktuellen Pegel niedersächsischer Gewässer informieren.
Finden Sie Messstellen an Flüssen in Ihrer Nähe mit der integrierten Umgebungssuche und der innovativen Kartenübersicht, fügen Sie sie zu den Favoriten hinzu und behalten Sie so jederzeit den Überblick.
Die Trendberechnung und die Anzeige der aktuellen Meldestufen hilft Ihnen rechtzeitig Maßnahmen zu veranlassen, falls Ihr Hab und Gut durch steigende Gewässer in Gefahr geraten sollte.
Die liebevolle Gestaltung und die einfache Handhabung machen diese App zur Nummer 1 Referenz der Pegelstände Apps.
● aktuelle Pegelstände niedersächsischer Flüsse
● Trendberechnung (ist der Pegel z.B. gestiegen oder gefallen?)
● Übersichtskarte mit integrierter Trend- und Meldestufendarstellung
● detaillierte Tages-, Wochen-, Monatsübersicht des Pegelverlaufs in einer übersichtlichen Grafik
Haben Sie Fragen oder Anregungen zum NLWKN Pegelmelder?
Kontaktieren Sie uns unter: firstname.lastname@example.org
Bitte beachten Sie:
Beim Öffnen der Anwendung (auch aus dem Hintergrund) muss eine Internet-Verbindung bestehen, damit die aktuellen Daten geladen werden können.
Die Aktualität der Daten ist vom Datenbestand des NLWKN abhängig, es kann daher keine Garantie dafür übernommen werden, dass die Daten vollständig und korrekt sind.
Support for Pan,Tilt & Zoom control.
Support Finger touch to control PTZ.
Support 3G and Wifi.
Direct stream connection.
Snapshot capability (while viewing live stream) to save pictures to your local photo gallery.
Support for landscape and portrait mode.
Ability to change ip address and port as desired for internal and remote users.
If you have any question please contact with us: email@example.com
- Multitouch detection (support up to 10 fingers)
- Get touch move report rate (by drawing circle)
- Experience Tests (Zoom, Rotation gesture test)
- Single touch accuracy (Draw points along line to check offset variance)
- Touch identification (Show coordinate)
*Note: Please using option menu to switch each test item.
!! knowledge supplement!!
"G-sensor" is an abbreviation Gravity sensor, which generally also be referred to "Accelerometer".
Feel free to email me with any questions.
- Pen Pressure Support (Enable from settings)
- Open/Save (MDP Format / It opens by FireAlpaca)
- PSD Import/Export
- Foreground color brush, Transparent color brush
- Add Palette, Remove Palette
- Add Layer, Remove Layer, Clipping Layer, Lock Alpha
- Layer Mode (Normal, Add/Emit, Multiply, Overlay, Screen, Lighten, Darken, Difference, Dodge, Burn)
- Selection Tool (Rectangle, Lasso, Free Transform)
- Bucket Tool (Auto Expand (0, 1, 2 pixel), Enable/Disable AntiAliasing)
- Filter (Hue, Gaussian Blur, Mosaic, Monochrome)
- Navigator (Check Settings)
- Eraser, Move Tool, Fill Rectangle, Gradient
[Manual (machine translation)]
http://fuzichoco.com/ (Artist - fuzichoco
- Galaxy Note 10.1 (2012)
- Galaxy Note 10.1 (2014)
- Galaxy Note 8.0 (N5120)
- Nexus7 (2012)
- Cintiq Companion Hybrid
- NVIDIA SHIELD Tablet
- HTC J ONE
- LG Optimus G (LGL21)
- Korean language : https://twitter.com/MyungsooLim
- https://www.youtube.com/watch?v=RAKV_Ptq8DY (layerpaint video
- http://www.tomshw.it/cont/news/video-epic-fail-come-si-disegna-con-galaxy-note-e-wacom/54629/1.html (come si disegna con Galaxy Note e Wacom
[Update History (Old)]
[1.3.10] "Hide TitleBar (ActionBar)" function has been added ("Settings" menu). You need to restart LayerPaint HD.
[1.3.8] "Pen Pressure Adjustment" function has been added ("Others" menu)。
[1.3.7] "Disable Single Touch (UI)" function has been added ("Settings" menu）
[1.3.0] Layer Folder, 1 bit Layer and 8 bit Layer has been added (Enable from settings).
[1.2.9] Fix for Android 4.4.
[1.2.6] Brush and UI response has been improved.
[1.2.5] Optimize for Galaxy Note 10.1 (2014 Edition).
[1.2.4] Deselect button has been added.
[1.2.0] View rotation function has been added (Navigator).
[1.1.8] Vanishing point snap has been added.
[1.1.7] Multithreading performance has been improved. Bug fixed (Navigator).
[1.1.5] Malfunction of Eyedropper has been fixed.
[1.1.4] New option (settings) has been added (Show brush opaque bar）. Malfunction of Brush Preview has been fixed.
[1.1.3] Scatter Watercolor brush has been added. Receiving Image from other apps has been supported.
[1.1.1] Modification of the translation.
[1.1.0] Filter function has been added. (Hue, Gaussian Blur, Mosaic, Monochrome)
[1.0.9] Eyedropper tool's position has been changed.
[1.0.7] Malfunction of Eyedropper has been fixed.
[1.0.5] Galaxy Note 10.1 (2014) Support. (Brush Lag Fixed)
[1.0.4] "Position toolbar always on right or left" option has been added (Settings). New UI Scale (85%) has been added (Settings).
[1.0.2] Show Pixel Grid option has been added (Settings).
[1.0.0] Official version.
[0.9.29] Navigator function has been added (Settings).
[0.9.27] Korean language support. Brush property (Bitmap/Scatter).[0.9.26] Crash bug fixed
[0.9.24] Eraser button (Stylus) support.
[0.9.23] Multi-touch has been improved.
[0.9.21] "Locate the toolbar on the right side" option has been added.
[0.9.20] "Lowering a canvas display resolution mode" has been added. "Gallery Manager (Others)" has been added (Delete File/ Rename File).
[0.9.19] "Open" has been improved (Faster).
[0.9.18] "Export/Share Transparent PNG" function has been added
[0.9.17] "Gallery (Open)" has been improved
[0.9.16] "Free Transform" function has been added
[0.9.15] Brush Property (Pen, Eraser, Airbrush, Watercolor)
[0.9.14] Transform has been improved
[0.9.10] "Flip View" function has been added (Toolbar)
[0.9.6] "Save As" has been improved
[0.9.2] Volume key Undo-Redo (Settings)
[0.9.0] First release
The app provides a 3D gyroscopic enhanced reality representation of the holographic label. The label can be seen under various angles to help the verification of authenticity process.
You can paint with switching Brush, Eraser, Line Draw, Fill Rectangle, Select Rectangle Region, Move, Bucket Tool, Gradation, Spoit, and Hand Tool.
For layer window, we offer Add, Delete, Move Down, Set Alpha, toggle Visible-Invisible. You can save working copy as a PSD(Photoshop) format, that preserve layer structure. From menu, you also operate Clear, Duplicate, and Merge Down layer.
- Professional mode has been added
-- Show floating toolbar from settings
-- Brush snap function
-- Edit selection (Cut/Copy/Paste/Transform)
-- Eyedropper shortcut area (Touch and Drag)
-- Gradient option (Linear or Circle / Fore to BG / Fore to Transparent )
-- Bucket option (AntiAliasing/Expand pixels)
[1.1.0] "Pen Pressure" support (e.g. ThinkPad Tablet, Galaxy Note)
* Tablet optimized version is here
* Sample Illustration
* Ronnie Tucker's Example (on Nexus7)
* Samsung Galaxy Note 10.1 sketching with Layer Paint
* LayerPaint - Samsung Galaxy Note 10.1 run through
* LIA Cast 56 - Toward a Paperless Studio, Pt 1
* Galaxy Note 2 Review (by Basil Kronfli)
* Introduction article (Japanese)
Appen används även vid stödkantläggning och ger då full kontroll av stödkantläggarens funktioner såsom automatisk kantföljning och nivå i utmatningstråg.
ForshagaSpridaren sprider effektivt sand, grus eller salt och används året runt för aktiviteter såsom halkbekämpning, beläggningsarbeten, dammbindning och stödkantläggning. Sandspridaren har funnits på marknaden i över 60 år och har med åren utvecklats till en optimal väghållningsmaskin med många användningsområden.
Uppfyller myndigheternas krav enligt CEN-15430.
You can add locations by hand, or import them from a csv-file. You can choose which type of measurements can be performed at each location, before you add new measurements. At the end of the day, you can mail the locally stored locationss and measurements to yourself or anybody else. The input and output are simple csv-files.
FieldLogger was initially build to log measurements of groundwater head in wells, but it has grown into a tool to store measurements that are bound to a location, but vary with time. No internet connection is needed to perform the measurements (the google maps background needs an intenet connection though). The app is completely free, with no ads. If you find any bugs, please contact us. If you use the app and like it, please rate it.
The data is stored in two csv-files: the locations in the file locations.csv and the measurements in the file measurments.csv. The locations.csv-file can also be imported into the app, so that locations can be shared with other users.
The locations.csv has the following propierties:
The columns are separated by ';', and the title-row has to include the following fields: NAME, SUBNAME, LAT, LON. If the user wants to use his own input-fields at each location, the field INPUTFIELD needs to be added to the header as well. For each location the input-fields are separated by '|'. At the top of the file these input-fields have to be defined by three column rows, proceeded by the header NAME;INPUTTYPE;HINT, that in turn is proceeded by the string 'FileVersion 1;' followed by the number of input-fields. For each location the input-fields are selected by matching the INPUTFIELD in the location list to the NAME string in the input-field list. So the locations.csv-file will look something like this:
Value;numberDecimal|numberSigned;in m. to top of tube
The measurements.csv has the following propierties:
A five-column (also seperated by ';') csv-file with the header LOCATION;DATE;TIME;VALUE;TYPE
So the meassurements.csv-file will look something like this:
Well1_1;26-08-2014;07:56:14;Waterlevel is high;Comment
Well1_2;26-08-2014;07:57:11;The well is dry;Comment
Thank you for READING the following BEFORE commenting/reviewing:
For Samsung Note, Note II, and Note III phones. Also works on Note 8 tablets prior to Android 4.2.2 update. A newly modified kernel (see http://forum.xda-developers.com/showthread.php?t=2299406&page=2) exists for Note 10 tablets that appears to provide the needed files and the app appears to work there. No other devices are supported! THIS INCLUDES NOTE 4.
Your device likely must have a TouchWiz-based ROM for this app to work. Other ROMs may lack support for the S-Pen settings that this app manipulates.
You simply tap that app's icon and the quick change is performed - there is no other user interface and you will only see a popup message indicating success or failure.
Please email me from the link on this page with questions, comments, or suggestions. I cannot respond to reviews left by users so that is not the best channel to reach me.
I have owned and really loved my Samsung Note for some time now. As an ex-Palm user, the S-Pen stylus was a huge draw. To my dismay, I began to see that over time the accuracy and the location of the floating pointer of my S-Pen began to drift. I searched and found many people complaining about this and saw multiple posts of "fixes" to try. I found one paid app in the marketplace that claims to deal with this but its price seemed excessive. I recalled that on my various Palm devices I occasionally had to re-run the touchscreen calibration routine and began to look for something like this thinking it should be built-in to the Note. But I could not find anything that actually seemed to help.
After more digging I discovered a technique that seemed to work. Simply changing the S-Pen's dominant hand setting back and forth from my choice of Left to Right and back to Left again made a big difference. But doing so was inconvenient and it really had to be done with some regularity to keep things really perfect. After yet more searching, I discovered how to change the S-Pen device's dominant hand by communicating directly with the device from code (not the preference setting). This technique requires ROOT access but I tired and found it worked well for me.
I decided to wrap this technique up in a little app called Reset S-Pen. It uses the same technique and therefore also requires ROOT access. Reset S-Pen is available free in the marketplace. You simply tap that app's icon and the quick change is performed - there is no other user interface. The app determines your current dominant hand setting from the Android preference file and then tells the S-Pen device to switch to the opposite hand and back again. It displays a popup message on success or failure.
I have also released Reset Spen Pro which, for a minimal cost, offers additional features and the convenience of having the Spen reset periodically on a regular schedule. Please check it out!
Please email me from the link on this page with questions, comments, or suggestions. I cannot respond to reviews left by users so that is not the best channel to reach me. Thanks!
**** R E Q U I R E S -- R O O T ****
ver 1.4: added "reassociate." in almost devices, it might be better
ver 1.3: minor modification, frequency of accidental terminations may be reduced.
When the screen light-on, this software make wifi disable and then do enable automatically.
With some device (esp. android 1.5, 1.6), it might fix wifi reconnect problem.
This App is developed by motivated from the App, Bluetooth Auto Connect, and I have ported much Java and XML codes from the source code of it.
(1) Make internet-sharing (Wi-Fi or Bluetooth) enable of your Android phone, and connect an Android device there.
(2) Launch this App both on Android devices.
(3) You can take a photo by tapping a button on this app of the opposite side, and vice versa.
Draw a picture, then send the canvas-ID to your family, friends, and colleagues via e-mail or twitter!
You can draw the common picture simultaneously and dynamically.
* It uses internet-connection to share the canvas.
* The full version "Air Peinture" is also available, by which you can select color more freely.