The Linszter Datalog is the second version of the old Honda Datalog for Android™ application. It requires a Honda OBD1 Eprom modified ECU with J12 jumper removed, and tuned with Crome (Normal[QD2] or Gold[QD3]) or eCtune software. The application is not compatible with the Stock ECU at the moment. You can find several articles for chipping the Honda OBD1 or find a local tuner. It also requires a properly configured TTL-Bluetooth adapter, which is connected to the CN2 port on the ECU. (OBD0 (Stock, TurboEdit, BRE), Stock OBD1 and OBD2 ECU support is work in progress.)
- Supported MAP Sensors:
- Supported Wideband O2 Sensors:
Stock (Voltage display)
Custom Settings (min-max V/min-max AFR)
- Metric and Imperial Units
- 4 display
- Log to CSV file
- Log viewer
- Video recording (Video recording and logging same time. You can use RaceRender2 (http://racerender.com/RR2/Features.html), to make overlayed gauges on the video)
- GPS and G sensor logging
Summary file logging:
- Elapsed time
- 0-100kmh (0-62mph) time
- 0-402m (1/4 mile) time
- Highest rpm, speed, boost
- Average rpm, speed
Upload and store best 0-62mph, 1/4mile and top speed online. (http://www.linszter.net/linszterdatalog)
(ECU) of motorcycles Triumph, KTM, Aprilia, Benelli, Ducati and Moto Guzzi.
This application requires an USB/OBD2 cable with FTDI chipset or a Bluetooth adapter ELM327 v1.4 or 1.5.
Warning, with bluetooth connection, the reading and reprograming functions are not available.
Models list compatibility :
Triumph Daytona 675, cable & bluetooth, up to VIN # 564947
Triumph Daytona 675, from VIN # 564948, bluetooth connection only
Triumph Street Triple & Street Triple R, cable & bluetooth, up to VIN # 560476
Triumph Street Triple & Street Triple R, from VIN # 560477, bluetooth connection only
Triumph Speed Triple 885, 955, 1050 & 1050 R (including 2014 models)
Triumph Tiger 800/800XC, 885 (900), 955, 1050 & Tiger Sport (including 2014 models)
Triumph Tiger Explorer, bluetooth connection only
Triumph Sprint ST/RS 955 and 1050, Sprint ST/GT (including 2013 models)
Triumph Daytona T595/955i Daytona (all models)
Triumph Rocket III (include 2014 models)
Triumph Daytona 600, 650, Speed Four, TT600 (all models)
Triumph Thunderbird 1600 & 1700 cc, except Commander et LT
Triumph America, Bonneville, Scrambler, Speedmaster, Thruxton (including 2015 models)
KTM 990 LC8 & 1190 RC8 (include 2012 models)
KTM 690 Duke (include 2011 models) (except Duke 4)
KTM 690 SMC & Enduro/690 Supermoto (including 2013 models)
Aprilia Caponord and Futura RST
Benelli Tornado (Sagem ECU)
Benelli TNT & Trek model (only with FTDI USB to RS232 serial cable)
Ducati* 749, 848, 999, 1098, 1198
Ducati StreetFighter 848 & 1098
Ducati* Monster S2R 800 & 1000, S4R
Ducati* Hypermotard 1100 (not EVO)
Ducati* Multistrada 1000 & 1100
Ducati* ST3 & ST4
Moto Guzzi Breva 1100
Moto Guzzi Griso 1100/1200
Moto Guzzi Norge 1200
Moto Guzzi Stelvio 1200
Moto Guzzi 1200 Sport
Moto Morini Corsaro 1200
Moto Morini Avio
Moto Morini Granpasso 1200
Moto Morini 1200 Sport
Moto Morini 9 1/2
* ECU 5AMHW610
It is highly recommended to visit the site www.tuneecu.com before using this application.
The perfect addition to OBD and OBD2 diagnostic tools that don't give you information on the DTC. Now you can find out exactly why your check engine light is on in your car.
This is the lite version. of OBD 2 trouble code Lookup. It provides 1,300 generic trouble codes (P0XXX, B0XXX, C0XXX, U0XXX). The full-version features over 14,000 generic and manufacturer-specific (EOBD2) Power-train (P1XXX,P2XXX), Chassis(C1XXX), Network(U1XXX), and Body(B1XXX) codes for
Supported manufacturers below:
OBD, OBD I, OBD II, OBD 1, OBD 2, On Board Diagnostics, check engine light, Trouble codes, error codes, engine torque.
This app does not connect to any ELM Bluetooth devices, and is best used in conjunction with inexpensive diagnostic meters that do not provide trouble code definitions. Now you'll know exactly why the check engine light is on in your car, and what the OBDII DTC means.
Disclaimer: All information is provided “as is” without warranty of any kind, either expressed or implied.
You can buy bluetooth module from Moates.net: https://www.moates.net/neptunedemon-bluetooth-module-addon-p-298.html Direct ECU, Demon 1, Demon 2, and QuarterHorse has different pinout and different baudrate. If you have question or problem please contact as at email@example.com
The app is free to download, but you need to buy the communication protocol what you want to use with in-app payment.
Supported communication protocols (More protocols comming soon):
- Crome QD2 (Honda™)
- Crome QD2 with Moates Demon (Honda™)
- Crome QD3 (Honda™)
- eCtune (Honda™)
- Neptune (Honda™)
- Neptune RTP (Honda™)
- GUFB with Moates QuarterHorse (Ford™)
- CBAZA with Moates QuarterHorse (Ford™)
- NismotronicSA (Nissan™)
- Hondata™ S300 V1, V2 (with USB/Bluetooth adapter) V3 (Bluetooth) (Honda™)
There are two datalog modes in the app. A Datalog display mode and a Record Video mode.
In Datalog mode you can choose different layouts to see the engine data. There are four layout which is customizable. You can record the logged data which is recorded in two format. A .tlg for playback mode, and .csv for easy analizing the data.
In Record Video mode you can record video while you record the logged data. The app just save the raw video file and log files, you need a software to overlay it. (RaceRender, Dashware...etc).
In the Open Log menu you can playback your recorded log files (.tlg).
Supported MAP Sensors:
- GM 2BAR
- GM 3BAR
- Motorola 2.5BAR
- AEM 3.5BAR
- Omnipower 3Bar
- Omnipower 4Bar
- Or you can set custom MAP sensor.
Supported Wideband O2 Sensors:
- Stock (Voltage display)
- AEM UEGO
- MoTeC PLM
- Innovate LC-1
- FJO CWC0002
- Or you can set custom O2 sensor.
More features coming soon.
More info: http://www.hrtuning.com
It's quite simple. Select The vehicle manufacturer or Global, enter the Global Trouble Code DTC, then press search and in case it appears within the 2500 Trouble Codes, the description will be displayed!!
In addition, by pressing the "Search Web" button, it will search within Google for the entered Fault Code.
This app is an excellent tool, for those who obtain only the OBD Trouble Code, but do not know what it means.
Please note that using this app does not require connecting to ELM / ELM327 device, or any other scanner. this is a standalone application!
In case you find this app helpful consider upgrading to the Pro version which supports the following:
1. More than 100,000 Extended OBD Trouble Codes DTC !!! (Specific Manufacturer Fault Codes / Trouble Codes).
2. Powertrain, Body, Chassis and Communication DTCs.
3. Global DTCs for all vehicle manufacturers in the world!!
3. Specific Codes for all vehicles belong to these manufacturers:
* Chrysler + Dodge + Jeep
* Ford + Ford Truck + Lincoln
* Honda + Acura
* Nissan + Infiniti
* Toyota + Lexus
Diagnostic Trouble code, DTC, Trouble code, fault code, obd, obd2, obd-ii, obdii, on-board diagnostics, vehicle, automotive, elm327, scanner, automotive diagnostic tool, error code, cars, onboard, check-engine, check engine. warning code, warning light, ECU, Oxygen Sensor, Throttle, PCM, TCM, Ottotest, Blue Streak Electronics, Ototest, Maf, ECM, error code, obdi, obd1, coolant temperature, vehicle speed, Actuator, Cylinder, Injector, Exhaust, Fuel, Gear, Ignition, Immobilizer, Motor, Passenger, RPM, mph, kmh, pedal, Yaw Rate.
- A-, B-, C-, D-, F-, G-, H-, J-, K-, L-, N-, R-Series Engine Specifications
- OBD0/OBD1/OBD2 ECU Fault Codes
- Transmission Specifications
- ECU List
- Bearing thickness chart
- ECU pinouts
The trademark "Honda" and any other product names, service names or logos of Honda used, quoted and/or referenced in this app are trademarks or registered trademarks of Honda or any of its affiliates. Other product names and/or company names used in the app may be protected as their trademarks and/or trade names.
We have apparently not been sufficient clear about supported cars:
As this is an OBD adapter, only EOBD/OBDII compatible cars are supported.
In EU, all cars sold since 2001(gasoline)/2004(diesel) are required to be EOBD/OBDII compatible.
As far as we can tell, most brands comply, but if you have a French car, you may want to check its compatibility.
You may have luck with older cars, too.
Read more at www.mobilscan.dk!
** 2.7 **
Text i Swedish and Finnish
** 2.6 **
More workarounds for the phones' different ways of handling BT pairing and connection.
** 2.5 **
Some phones (XPeria GO, and others using Android 4.X) have seen problems connecting to the adapter. Release 2.5 contains a workaround that seems to have fixed this.
The font size now respects the general font scaling setting on the phone.
** 2.4 **
HUD mode for Instrument page (1 or two instruments only, 3/4 would be too cluttered).
Select HUD from the menu. Tap the HUD display to select color.
For Android 3.0 and newer.
*** New in 2.3 ***
Workaround for the apparent Bluetooth problems introduced in Android 4.2 and 4.3. Tested on Nexus4, HTC One, and Samsung Galaxy S4 mini.
*** New in 2.2 ***
View your previous reports as 'My reports' (report page).
*** New in version 2.1.4 ***
* Sharing of snapshot report now also possible to facebook and similar services. Requires that you have the Facebook app installed.
* 'Real' fuel consumption calculation added - FOR GASOLINE/PETROL VEHICLES. This will only be visible on vehicles having MAF (Mass AirFlow), otherwise we simply don't have the necessary information. Note that the value may be visible also on diesel vehicles, but that calculated value is most likely completely wrong, then. We have no (sure) way of detecting a diesel, so in that case, you'll have to use the 'Energy burn' calculation instead.
* Take a screenshot and share it with your friends. Available from the menu (or in the action bar if there's room).
Now you do not need to drive on with the MIL light on.
Now you do not need to wait to go to the garage with your car to know what is wrong.
Now you can prepare the garage by knowing what is wrong.
Now you can see what is wrong with your car on your holiday so that you know if you can drive on.
And all this for less than what most garages take for doing the same test once.
The system comprises an this app and an OBD Bluetooth adapter you either buy at the local dealer or online.
MobilScan gives access to car information as defined by the ISO standards about OBD, this means that you can read out fault codes, continuously receive and display a full list of engine parameters like oxygen sensor readings, air mass, temperature sensors and other parameters used by the engine control computer (ECU).
When you want to capture the current state of the car, you may send a 'snapshot report'. MobilScan compiles information about the current state of the car, and allows you to send this as a HTML report to a receiver of your choice (e-mail, Bluetooth, ...)
NB! The MobilScan software is free, but we're trying to make a living from this, and you'll have to buy the corresponding MobilScan OBD adapter from us. Please contact firstname.lastname@example.org for pricing and availability in your region. If you are already a MobilScan customer, you may use your existing OBD adapter.
If you are just looking for a fault code lookup tool, try http://market.android.com/details?id=com.care2wear.dtclookup_full
Version 2.0 uses the ActionBarSherlock framework to implement action bar support on early Android versions. If you're a developer: try it!
Hyundai Motor,Kia Motors,Daewoo Motors,Samsung Motors,Ssangyong Motors
아직은 테스트(베타) 버젼 입니다.(정식버젼 아님)..
(1) OBD,OBD1,OBD2,KOBD 기능 지원됩니다.
(2) 3200개의 고장진단결과(DTC코드) 한글화
(3) 220개 정도의 센서정보 지원 (아래 링크 참조)
(4) 국산차 200개 차종 KOBD지원 (아래 링크 참조)
(5) 10개의 제어기(ECU,TCU,ASB,공조기,하이브리드 기타) 지원
(6) 스킨(게이지) 보여주는 기능
(7) 스킨모드인 경우 대기모드(LCD 꺼짐) 작동 않게 처리
(메인모드에서는 일정시간후 LCD 가 자동으로 꺼집니다)
(8) x86 CPU(노트북 안드로이드) 에서도 실행가능 하게 변경
(기존 안드로이드 폰은 ARM CPU를 사용)
(9) 백그라운드 실행 기능 추가
(차에 탑승시 호주머니에서 휴대폰 꺼내고 프로그램 실행해야하는데.)
(이제 호주머니 안에 있어도. 프로그램에서 알아서 불루투스 연결하고)
(연비 계산하고. 차계부 만들고. 알람/경고 발생시킵니다 )
(대신 항상 어플이 대기모드 없이 움직이므로 전기소모는 많읍니다)
(10) 아이콘 에니메이션 으로 상태바에 상태표시
(11) HUD/거울 모드 활성화 되었습니다
(12) HUD/거울 모드시 LCD최대 밝기 로 강제설정
(13) GPS 와 G센서,자이로센서,중력센서 정보 보여줌
(14) 트립 기능 활성화
(15) 연비 기능 활성화
참고 연비 게산 방식
5가지 연비계산방식 만들어서 업그레이드 했구요
OBD2표준동글 사용자는 MAP 방식 또는 MAF방식을 선택해야하고
KOBD 사용자는 인젝션분사시간,디젤 인젝션분사량 방식 선택해야 합니다
혹시 연비계산이 완전히 엉터리라면 메일 남겨주시구요..10%오차는 정상인 거구요
업그레이드 되어야 하는 기능
(2) 스킨 알람 기능
(6) 기타 윈도우 모바일 버젼에서 구현했던 기능
(LCD해상도는 400*240 ~ 1280*800 해상도 에서만 동작가능)
1280*800 이상의 해상도 에서는 스킨이 동작불가능
2008년 이후의 국산차는 OBD2가 강제의무사항이라 OBD2무조건 지원
2000~2007 년식의 국산자동차는 KOBD방식으로 지원
KOBD 방식으로 지원하는 자동차 리스트는 아래링크참조
현재 지원되는 OBD,KOBD 센서 정보는
Free-OBD BT 또는 ELM327호환 불루투스 동글 입니다
개발자 연락처 :
AccuShade has gone mobile with a breakthrough Android application to go with its current iOS color retrieval application. AccuShade Mobile makes it easier and faster for customers to search for color codes and formulas. Matrix System has developed unprecedented technology and performance that will allow customers to have access to the latest formulas and updates from the palm of their hand anytime, all the time.
-Provides access to over 103,000 formulas, including thousands of variants
-Easy accessibility to the latest formula updates
-OEM formula search
-Competitor Formula Search
-Color name search
-Detailed formula information including notes, color chip deck, formula details, and actual formulation
-Formulation by size and percent
-Easy access to hundreds of Matrix System's Material and Saftey Data Sheets (MSDS) and Technical Data Sheets
-Side-by-side formula comparisons
-Share formulas via email