To open dump use WireShark or similar software, for preview dump on phone use Shark Reader.
Based on tcpdump. Please leave comments/send e-mail if you have any problems/suggestions.
* Added busybox support (non-standart-linux roms)
Fast and accurate, Fing is a professional App for network analysis. A simple and intuitive interface helps you evaluate security levels, detect intruders and resolve network issues.
+ Discovers all devices connected to a Wi-Fi network. Unlimited devices and unlimited networks, for free!
+ Displays MAC Address and device manufacturer.
+ Enter your own names, icons, notes and location
+ Full search by IP, MAC, Name, Vendor and Notes
+ History of all discovered networks.
+ Share via Twitter, Facebook, Message and E-mail
+ Service Scan: Find hundreds of open ports in a few seconds.
+ Wake On LAN: Switch on your devices from your mobile or tablet!
+ Ping and traceroute: Understand your network performances.
+ Automatic DNS lookup and reverse lookup
+ Checks the availability of Internet connection
+ Works also with hosts outside your local network
+ Tracks when a device has gone online or offline
+ Launch Apps for specific ports, such as Browser, SSH, FTP
+ Displays NetBIOS names and properties
+ Displays Bonjour info and properties
+ Supports identification by IP address for bridged networks
+ Sort by IP, MAC, Name, Vendor, State, Last Change.
+ Free of charge, no banner Ads
+ Available for iPhone, iPad and iPod Touch with retina and standard displays.
+ Integrates with Fingbox to sync and backup your customizations, merge networks with multiple access points, monitor remote networks via Fingbox Sentinels, get notifications of changes, and much more.
+ Fing is available on several other platforms, including Windows, OS X and Linux. Check them out!
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
Samsung Galaxy S:
- AT&T/Rogers Captivate SGH-I896/I897
Samsung Galaxy S2:
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
Samsung Galaxy S3:
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
Samsung Galaxy S4:
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Samsung Galaxy Note
Samsung Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Samsung Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Samsung Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/N5113
- LTE GT-N5120
Samsung Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/N8013
- LTE GT-N8020
Samsung Galaxy Tab:
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L, GT-P6210
- Tab 7.7" GT-P6800, GT-P6810
- Tab 10.1" GT-P7500, GT-P7510
- Tab 2 7" GT-P3100, GT-P3110, GT-P3113
- Tab 2 10" GT-P5100, GT-P5110, GT-P5113
Samsung Galaxy 5:
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
For discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
- MANUAL -
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
ROOT IS REQUIRED!!!
UNIQUE APP WHICH KEEPS YOUR DEVICE CLEAN AND ALSO GREAT FOR USING WITH RAM MANAGER!
IF YOU FIND A BUG OR IF YOU HAVE SOME PROBLEM, CONTACT ME BEFORE YOU GIVE LOW RATING, PLEASE.
Simple and effective application which a lot increases your peformance by cleaning your system. You can choose between quick cleaning and full cleaning. Quick cleaning clears your memory, file cache, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Application is also great application manager, you can uninstall, clear data and freeze or unfreeze your system and non-system applications.
-Restart system UI
-Clean drop caches
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clean dalvik cache
-Clean init.d folder
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clear app data
-Quick cleaning interval
-Exception list for files and folders
WiFinspect is a multi-tool intended for Computer Security professionals and other advanced users that wish to monitor the networks they own or have permission, i.e. the app is a security audit tool and not a hacking tool. The functions include:
* Network Information
* UPnP Device Scanner
* Host Discovery
* Network Sniffer
* Pcap Analyzer (three options)
* PCI DSS Menu
- Access Point Default Password Test (requirement 2.1.1.c)
- Access Point Security Test (requirement 4.1.1)
- Access Point Scanner (requirement 11.1)
- Internal Network Vulnerability Scanner (requirement 11.2.1)
- External Network Vulnerability Scanner (preparation for requirement 11.2.2)
* Host Information
* Port Scan
* Host Vulnerability Scan
This app is a student dissertation by Andreas Hadjittofis as part of his MSc in Computer Security at the University of Birmingham. The project is supervised by Dr Tom Chothia. The developers of this app cannot be held responsible for how this app is being used. The app comes with no guarantees.
* Based on your reports, Nmap WILL NOT WORK on devices running Android 2.1 and 2.2. You will get the "Some binaries could not be installed" error message and will be presented with the non-root mode. If you are using a newer Android version, please email me.
* Network Information (ROOT): Information about the connected network like MAC and IP addresses, gateway etc
* UPnP Device Scanner: Lists all UPnP devices on the network that are within the view of your device
* Host discovery (ROOT): Uses nmap to discover all devices on the network that are within the view of your device
* Network Sniffer (ROOT): Uses tcpdump to sniff on all packets that are within the view of your device. The resulting pcap files can be analyzed with Wireshark or the built-in Pcap Analyzer
* Pcap Analyzer: Uses jNetPcap to parse a pcap file. Three options: Packet Distribution, Bandwidth Distribution or Communicating Hosts analysis
* Access Point Default Password Test: Checks a pre-set list of default router passwords against your router’s control panel and notifies you if your router is using a default password
* Access Point Security Test: Displays the access points that are within the view of your device with a note whether they are secure (WPA/WPA2) or not (WEP or unlocked)
* Access Point Scanner: Displays the access points that are within the view of your device
* Internal Vulnerability Scanner (ROOT): Uses nmap to find all devices on the network that are within the view of your device. A note is given whether exploits exists for a given device based on its operating system and open ports
* External Vulnerability Scanner (ROOT): Runs Host Information, Port Scan, Host Vulnerability Scan, Traceroute, Ping or Sniffer functions on a given IP address or hostname
* Host Information (ROOT): Uses nmap to retrieve the device’s hostname, MAC address, vendor, operating system, device name and workgroup
* Port Scan (ROOT): Uses nmap to retrieve the device’s open ports. Click on a port to view the Metasploit results for the device's operating system and port
* Host Vulnerability Scanner (ROOT): Uses nmap to retrieve information about the host along with a note stating whether exploits exists for the device based on its operating system and open ports
* Traceroute (ROOT): Uses nmap to traceroute to a host
* Ping (ROOT): Uses nping to ping a host
* ACCESS_WIFI_STATE, CHANGE_WIFI_STATE, ACCESS_NETWORK_STATE: Used to determine if the device is connected to a Wi-Fi network and to retrieve the data displayed in Network Information function
* CHANGE_WIFI_MULTICAST_STATE: Used by the UPnP Device Scanner function
* INTERNET: Used to retrieve the device’s external IP address in Network Information function, for Metasploit search, and for the optional error reporting.
* WRITE_EXTERNAL_STORAGE: Used to store the nmap and pcap files
Captured data are saved as a PCAP file format in the external storage.
If you want a more detailed analysis, please transfer the file to your PC and use the software handles PCAP format(such as Wireshark).
No Root Screenshot It is an application that lets you take screenshots of your phone. This application works on ALL phones. Root is NOT required.
Take screenshots of any screen on your phone!
This application is for those users who need to take screenshots, but don't have root access to their phones.
PLEASE READ CAREFULLY BEFORE INSTALLING:
This application will instruct you to download and install a free desktop application on your Windows or Mac. Once installed, you must run the desktop application with your phone attached to your computer. This will enable screenshots on your phone.
Once you've done this, you can disconnect your phone and take screenshots whenever you want. However, every time you restart your phone, you'll have to connect it to your computer and run the desktop application again. If you restart your phone frequently, this app may not be for you, as it may prove to be too inconvenient.
Your phone will NOT be rooted or temp-rooted in any way. No system files on your phone will be altered.
If your phone is already rooted, please download the normal "Screenshot It" application from the Android market.
- Take a screenshot of your phone's screen
- Save as a jpg or png file and share anywhere
- Crop screenshots
- Annotate and draw on screenshots
- Screen shot status bar button
- Screenshot widget button
- Shake to screen shot
- Delayed screenshot timer
- "Share" menu integration
- Custom save directory
- Overlay phone information on screenshots
- Works on ALL devices
Please exclude this app from any task killer or anti-virus software on your phone. If you don't, you'll have to run the enabler more often.
NETWORK SNIFFER WIDGET on 3G and WIFI
** NEED ROOT ACCESS **
** NOT an application, it's a WIDGET **
** NOT based on tcpdump or libpcap **
- Start/Stop easily a capture in one click from your home screen.
- Detects automatically the type of connection.
- Write a PCAP file which may be read with tools such as Wireshark.
- A notification indicates the number of captured packets and the total size in bytes.
- At the end of the capture, PCAP file may be sent by email.
- Help is available on SniffDroid application.
Please report bugs at email@example.com, thanks.
★ Parallel packet captures (Wi-Fi, 3G, LTE)
★ Realtime packet information
★ Flexible packet filtering
★ Active network operations
★ Wireshark format supported (cap/pcap)
WARNING! Pro version will be useless if you are not expert.
WARNING! Please first install and test the free demo version.
**** THIS APPLICATION WILL NOT ROOT THE DEVICE ****
*Feel free to email me with any questions. I always reply!*
To learn more about root, please see my free educational application, All About Root
Advanced Features, improved UI and more detailed results are in the Pro version, Root Checker Pro.
The goal of this application is to provide even the newest Android user with a simple method to check their device for root (administrator/superuser) access.
This is a very simple application to notify the user whether or not they have properly setup root access.
This application will test the device for root access using a very simple, quick and reliable method. The su binary is the most common binary used on Android devices to grant and manage root access. Root Checker will check and verify that the su binary is located in a standard location on the device. Root Checker will also confirm the proper permissions and flags on the su binary in addition to testing that access is granted by the su binary.
Many times users experience issues along the path of installing, configuring and gaining root access. For some users the process can seem complex while for others the process can seem simple. Regardless of the user's technical skill set, Root Checker, will quickly and correctly verify whether or not root access is 100% functioning. The process of confirming root access is sometimes known by other terms such as, gaining superuser access or gaining administrator access. Root Checker covers all these terms as they relate to one core function, being able to execute commands with root access.
If the Superuser or SuperSU applications are installed and working properly, these applications will prompt the user to accept or deny the root access request from Root Checker. Accepting the request will allow Root Checker to check for root access. Denying the request will result in Root Checker reporting no root access.
Gaining root access varies based on manufacturer, model, and carrier. If you're searching for root access to your device, this application will not help you. If you're interested in rooting your device, please use http://www.google.com to find the appropriate rooting support areas for your specific device. Other popular web sites which provide rooting guides are http://forum.xda-developers.com and http://forum.sdx-developers.com.
Please don't leave negative feedback about a concern, bug or issue! Instead, please email me, tweet me, contact me on my web site - http://joeykrim.com/contact, IRC, or on the forums (XDA, RootzWiki, SDX, etc.) with your feedback, suggestions and comments!
I do my best to assist as many people as possible and appreciate all the support that has made this application successful! Thank you!
Need a direct link to the Tether Android installation (APK) file?
Looking for the Premium version of ClockworkMod Tether? It is a $4.99 in app purchase, no additional download necessary!
ClockworkMod Tether does not require root on your phone and does not require a separate tethering plan. Tether should work with any carrier and phone and does not require a carrier's tethering plan. To get around the root requirement on your phone, Tether will need to install a virtual network adapter on your computer; so there is a PC side install.
1) Install this application on your Android phone!
2) Install the Tether software on your PC. If your PC currently has an internet connection, you can download it here:
If your PC does NOT have an internet connection at the moment, start Tether for Android and use the Help button to easily download the PC software to your phone. You can then copy it to your PC and install!
Windows users will also need to install the USB/ADB driver for their phone. Tether's setup process will assist you through that step by step, or you can use the link below!
That's it! Connect your phone via USB to your PC, start Tether, and turn it on! Happy surfing!
If you have problems with Tether, please try the following first:
Disable Firewalls and Antivirus software.
Make sure you area not connected to the internet on wireless or ethernet.
Make sure you are using your OEM's USB data cable (and not just a charge cable).
If still not working, please contact firstname.lastname@example.org and provide the log from the Tether log window!
Tether is a 14 day trial. You will have full unfettered usage for 14 days, after which you will only be able to download 20MB a day. Please buy Tether Premium from the application's menu to unlock the full version and support future development!
Tether speeds slow?
Your USB speed is limited to the speed of the *slowest* peripheral you have connected. It is recommended you unplug any unnecessary/slow USB peripherals to get maximum Tether speeds.
Need a direct link to the Windows Drivers?
Applications that may interfere or cause installation issues with Tether on Windows:
Applications that may interfere with Tether on Mac:
Questions? Comments? Support? Just shoot me an email to email@example.com
"read phone state" and "internet" permissions are used to stat how many users are using my app, and when FC happens, I can get error report.
it's just used to improve my app. If you still can't accept, uninstall.
compared to other uninstall tools in android market, it is much more better
for example, the app " uninstaller " is a very popular uninstall app in google play, it's the smallest uninstall tool, simple and easy. But uninstall does NOT support rooted phones. Even you have root permission, you can NOT modify system apps inside your phone, which is very annoying.
the app " app remover ", is another similar uninstall tool in google play, but app remover neither supports rooted phones.
the app " system app remover ", is also a famous uninstall tool , and it does support rooted phones. But system app remover never give you any warnning before you uninstall a system app, which might be kernel file of your android phone. so it's much safer to use " root app delete " than "system app remover " in a rooted phone, especially for those new android users, who don't quite understand the danger of uninstalling system apps with root permission.
compared to many other similar uninstall tools, you will find how useful and how safe this App is.
Create, add and manage Swap memory file without swap partition on SD.
Reconfigure if you must change swap size.
Need Root and kernel swap support.
NO Need swap partition on SD!
This program do not partition the SD card.
to check if it work, type 'free' on Terminal app!
The Internet and Network State permission is used by Google Play Services to show ads.
The Donate version don't need this permission.
Smaller number means larger resolution.
Please check http://forum.xda-developers.com/showthread.php?p=8184409 before use.
* Fighting FCs on some devices.
Old versions available at http://swapper.n3o.lv
You need tcpdump binary in /system/xbin for this program to work.
Use "Shark for Root" if you haven't this binary.
To open dump use WireShark or similar software, for preview dump on phone use Shark Reader.
Based on tcpdump.